* tools/card-call-scd.c (scd_apdu): Add optional arg 'options'.
* tools/gpg-card.c (cmd_apdu): New.
(enum cmdids): Add cmdAPDU.
(dispatch_command): Add command "apdu".
(interactive_loop): Ditto.
--
This command is hidden because it can be used to brick a card. The
command is basically the same as sending "scd apdu" in
gpg-connect-agent but here we do full decoding and printing in hex.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (learn_status_cb): Return the full value for
UIF. Add info about SM, MCL3, and PD.
* tools/gpg-card.h (struct card_info_s): Add corresponding fields.
* tools/gpg-card.c (list_openpgp): Print capabilities. Print the
permanent flag for UIF.
(cmd_uif): Implement.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (learn_status_cb): Always fill chvinfo.
* tools/gpg-card.h (struct card_info_s): Increase size of chvinfo and
chvmaxlen.
* tools/gpg-card.c (list_nks): New.
(print_a_version): Support single part version numbers.
(list_card): Call list_nks.
--
Note that chvmaxlen is not yet used with NKS.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.h (struct card_info_s): Add manufacturer fields.
* tools/card-call-scd.c (release_card_info): Release them.
(learn_status_cb): Parse MANUFACTURER attribute.
* tools/gpg-card.c (get_manufacturer): Remove.
(list_card): Use the new attribute.
* g10/call-agent.h (struct agent_card_info_s): Add manufacturer fields.
* g10/call-agent.c (agent_release_card_info): Release them.
(learn_status_cb): Parse MANUFACTURER attribute.
* g10/card-util.c (get_manufacturer): Remove.
(current_card_status): Use new attribute.
--
This does away with the duplicated OpenPGP vendor tables; they are now
at a better place (app-openpgp.c).
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Remove argparse.h.
* common/argparse.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* agent/gpg-agent.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS and include
argparse.h. Do this also for all main modules which use our option
parser except for gpg. Replace calls to strusage by calls to
gpgrt_strusage everywhere.
* g10/gpg.c (opts): Change type to gpgrt_opt_t. Flag oOptions and
oNoOptions with ARGPARSE_conffile and ARGPARSE_no_conffile.
(main): Change type of pargs to gpgrt_argparse_t. Rework the option
parser to make use of the new gpgrt_argparser.
--
This is not yet finished but a make check works. gpg has the most
complex and oldest option handling and thus this is the first
migration target. SE-Linux checks and version-ed config files are
missing and will be added later.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* tools/card-call-scd.c (learn_status_cb): Adjust for recent change.
--
This adjusts for the chnage in scdaemon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.h (struct key_attr): Remove.
(struct key_info_s): Remove key_attr. Add keyalgo and keyalgo_id.
* tools/card-call-scd.c (learn_status_cb): Rework the key-attr info.
* tools/gpg-card.c (list_one_kinfo): Always show the algorithm; if
there is no key show the key attributes instead.
(list_openpgp): Do not print the "Key attributes".
(generate_key): Factor the repalce key pormpt out to ...
(ask_replace_keys): new.
(generate_openpgp): Rename to generate_all_openpgp_card_keys and add
an algo parameter.
(generate_generic): Rename to generate_key. Prepare generation of a
single OpenPGP key.
(cmd_generate): Revamp.
(ask_card_rsa_keysize): Remove.
(ask_card_keyattr): Remove.
(do_change_keyattr): Remove.
(cmd_keyattr): Remove.
(enum cmdids): Remove cmdKEYATTR.
(cmds): Ditto.
(dispatch_command): Ditto.
(interactive_loop): Ditto.
--
This change shows the key attributes of an OpenPGP card instead of the
key's algorithm if no key exists. It also remove the key-attr command
because for uniformity it is better to do this directly in
scd/app-openpgp.c At least for this new gpg-card tool.
There a couple of other changes but to the generate command but they
are not yet ready.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (struct card_cardlist_parm_s): Add field
with_apps.
(card_cardlist_cb): Handle the new with_apps flag.
(scd_switchcard): New.
(scd_switchapp): New.
(scd_applist): New.
(scd_serialno): Pass --all also in --demand mode.
* tools/gpg-card.c (cmd_list): Simplify switching of cards. Add
switching of alls. Print a list of apps per card.
--
Note that the output format of "list --card" slightly changes: The
current card is indicated with an asterisk. That should not harm any
robust parsers which might already be in use. It is anyway a
development version.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (maybe_switch_app): Factor reselect code out to ...
(run_reselect): new.
(app_write_learn_status): Tweak diagnostics.
(app_do_with_keygrip): Run reselect if a card has more than one
switchable application.
* agent/call-scd.c (agent_card_serialno): Ditto.
* tools/card-call-scd.c (start_agent): Use option --all with SERIALNO.
(scd_serialno): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_new_register): Set card version for Yubikeys.
(app_write_learn_status): Print CARDVERSION and APPVERSION.
* tools/card-call-scd.c (learn_status_cb): Detect them.
* tools/gpg-card.h (struct card_info_s): Add appversion and
cardversion.
* tools/gpg-card.c (list_openpgp): Remove version printing from serial
number.
(print_a_version): New.
(list_card): Print card and app version.
(cmd_generate): Do not allow broken Yubikeys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-piv.c (concat_tlv_list): Add arg 'secure' and adjust
callers.
(writekey_rsa, writekey_ecc): New.
(do_writekey): New.
(do_writecert): Provide a better error message for an empty cert.
(app_select_piv): Register do_writekey.
* scd/iso7816.c (iso7816_send_apdu): New.
* scd/app-common.h (APP_WRITEKEY_FLAG_FORCE): New.
* agent/command.c (cmd_keytocard): Make the timestamp optional.
* tools/card-call-scd.c (inq_writekey_parms): Remove.
(scd_writekey): Rewrite.
* tools/gpg-card.c (cmd_writekey): New.
(enum cmdids): Add cmdWRITEKEY.
(dispatch_command, interactive_loop): Call cmd_writekey.
--
This has been tested with gpgsm and RSA keys. For ECC keys only
partly tested using the sample OpenPGP nistp256 and nistp384 keys
because gpgsm does not yet support ECC certificates and thus we can't
write the certificates to the cert object after a writekey. Note that
they nevertheless show up in "gpgcard list" because gpg-card searches
for them in gpg and gpgsm. However, this does not work completely.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-tool-keys.c: Rename to card-keys.c.
* tools/card-tool-misc.c: Rename to card-misc.c.
* tools/card-tool-yubikey.c: Rename to card-yubikey.c.
* tools/card-tool.h: Rename to gpg-card.h.
* tools/gpg-card-tool-w32info.rc: Rename to gpg-card-w32info.rc
* doc/card-tool.texi: Rename top gpg-card.texi
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-tool-yubikey.c: New.
* tools/Makefile.am (gpg_card_tool_SOURCES): Add it.
* tools/card-call-scd.c (scd_apdu): Allow returning data.
* tools/card-tool-misc.c (send_apdu): New. Move from gpg-card-tool.c
and let it return data. Change all callers.
* tools/gpg-card-tool.c (cmd_writecert): Prepend the certref with the
current application type.
(cmd_yubikey): New.
--
This command allows listing of active applications and to enable or
disable selected applications. This is in particular useful to
disable the OpenPGP application so that the PIV support can easily be
tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (scd_genkey_cb): Make createtime optional.
(scd_genkey_cb): Ditto. Add arg algo.
* tools/gpg-card-tool.c (cmd_generate): Add options and factor card
specific code out to ...
(generate_openpgp, generate_generic): new functions.
--
This patch keeps the interactive OpenPGP mode but adds a pure command
line mode for other cards; in particular PIV cards. What we still
need to do is:
a) Add an interactive mode for PIV cards
b) Add a command line mode for OpenPGP cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (scd_readkey): New.
* tools/card-tool-misc.c (pubkey_algo_string): New.
* tools/gpg-card-tool.c (list_one_kinfo): Print the algo.
--
It is convenient to see the actual algorithm of keys even if no
certificate has yet been created.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (do_change_pin): Allow prefixing the CHVNO with
"OPENPGP."
* tools/card-call-scd.c (scd_change_pin): Change API to use strings.
* tools/gpg-card-tool.c (cmd_passwd): Adjust for change.
(cmd_unblock): Ditto.
--
The generic keyref allows for better error detection in case a keyref
is send to a wrong card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-tool.h (opt): Add field 'initialized'.
* tools/card-call-scd.c (scd_learn): Set it.
* tools/gpg-card-tool.c (main): Reworked.
(dispatch_command): New.
--
This work is not yet finished because most commands need some tweaks
for non-interactive work. What you already can do are things like:
$ gpg-card-tool list -- 'auth <oldkey' \
-- auth --setkey --raw 123456781234567812345678 -- help auth
Which will list the current card, authenticate using a hex encoded key
from the file "oldkey", set the new admin key to "123...78", and print
help for the auth command. Note that the -- acts as a delimiter
between commands. To use a double dash as argument to a command the
entire command must be quoted.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-tool-misc.c: New.
* tools/card-tool.h: Rewored data structures for key infos.
* tools/gpg-card-tool.c: Ditto.
* tools/card-call-scd.c: Ditto.
--
Note that this also changes the way the key information is printed.
Formerly we printed it like:
Signature key ....: <openpgp-fingerprint>
created ....: <timestamp>
keygrip ... : <keygrip>
now we do:
Signature key ....: <keygrip>
fingerprint : <openpgp-fingerprint>
created ....: <timestamp>
This is because a keygrip is always available but a fingerprint and
the creation date are properties of an OpenPGP card. A standard way
of listing keys is better than one depending on the type of card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c: New.
* tools/card-tool.h: new.
* tools/gpg-card-tool.c: Largely extended.
--
gpg-card-tool will eventually replace the --card-edit command of gpg
because it makes more sense to have a multi-protocol aware tool and
not just one for OpenPGP cards. Most OpenPGP card things works now
but a few, those which require close interaction with gpg, still need
to be implemented. And of course the whole planned non-interactive
stuff needs to be written.
Signed-off-by: Werner Koch <wk@gnupg.org>
