* cardglue.c (assuan_strerror, assuan_transact): Dummy functions
if not build with agent support.
* zh_TW.po, zh_CN.po, es.po, ro.po: Updated.
* tr.po: Updated from TP. Note: this is an exception in general
translations from the Robot are not anymore accepted.
* regcomp.c (MB_CUR_MAX) [_WIN32]: Define it only if not defined.
* g10.c (main): Option --debug-ccid-driver may now be given
several times increase the debug level.
* ccid-driver.c (parse_ccid_descriptor): Mark SCR335 FW version
5.14 as good.
(do_close_reader): Never do a reset. The caller should instead
make sure that the reader has been closed properly. The new retry
code in ccid_slot_status will make sure that the readersatrts up
fine even if the last process didn't closed the USB connection
properly.
(ccid_get_atr): For certain readers try switching to ISO mode.
Thanks to Ludovic Rousseau for this hint and the magic numbers.
(print_command_failed): New.
(bulk_in): Use it here. Add new arg NO_DEBUG.
(ccid_slot_status): Disabled debugging.
(agent_scd_writekey, inq_writekey_parms): New.
(agent_openpgp_storekey): Removed.
* cardglue.h: Add a few more error code mappings.
* keygen.c (copy_mpi): Removed.
(save_unprotected_key_to_card): Changed to use agent_scd_writekey.
* app-common.h, app-openpgp.c, tlv.c, tlv.h: Updated from newer
version in gnupg 1.9 CVS.
Changed all callers.
(ask_passphrase): Add new arg CACHEID and use it in agent mode.
Changed all callers.
(passphrase_clear_cache): New arg CACHEID. Changed all callers.
* cardglue.c (format_cacheid): New.
(pin_cb): Compute a cache ID.
(agent_scd_pksign, agent_scd_pkdecrypt): Use it.
(agent_clear_pin_cache): New.
* card-util.c (change_pin): Clear the PIN cache.
(check_pin_for_key_operation): Ditto.
* mk-w32-dist: Check for patch files.
* w32installer.nsi: Translated a few more strings. Print a
warning if permssions are not suitable for the installation.
Add Uninstaller entries.
Fixes#423.
* DETAILS: Document new status codes.
* cardglue.c (agent_scd_pkdecrypt, agent_scd_pksign)
(agent_scd_genkey, agent_scd_setattr, agent_scd_change_pin)
(agent_scd_checkpin, agent_openpgp_storekey): Make sure to send a
SC_OP_FAILURE after card operations which might change data.
* card-util.c (change_pin): Send a SC_OP_SUCCESS after a PIN has
been changed.
(change_name): Removed a debug output.
* status.h, status.c: New codes BAD_PASSPHRASE_PIN, SC_OP_FAILURE
and SC_OP_SUCCESS.
* de.po: Updated. Translation is still in the works, though.
CUSTOM_DESCRIPTION. Changed all callers.
* app-openpgp.c (do_getattr, do_learn_status, do_setattr): Support
the new private DOs.
(do_change_pin): Add a "N" prefix to the strings so that the
callback can act accordingly for a new PIN. Unfortunately this
breaks existing translations but I see no wother way to overvome
this.
* cardglue.c (learn_status_cb): Ditto.
(agent_release_card_info): Ditto.
(struct pin_cb_info_s): Removed and changed all users.
(pin_cb): Reworked.
* card-util.c (card_status): Print them
(card_edit): New command PRIVATEDO.
(change_private_do): New.
(main): Unconditionally implement --status-file, --logger-file,
--attribute-file, --passphrase-file, --command-file. This is not
generally useful but easy to support and might make scripting
under Windows easier.
* status.h (STATUS_NEED_PASSPHRASE_PIN): New.
* status.c (get_status_string): Added.
* passphrase.c (ask_passphrase): Moved status printing to ..
* cardglue.c (pin_cb): .. here and issue new status message.
* keyedit.c (sign_uids): Don't include the leading LF in the
translatable string but print them separately.
* apdu.c (apdu_open_remote_reader) [_WIN32]: We don't have ENOSYS.
opt.s2k_digest_algo. This helps fix a problem with PGP 2.x encrypted
symmetric messages. Change all callers (encode.c, g10.c, keyedit.c,
keygen.c, passphrase.c, sign.c).
* armor.c, cardglue.c, getkey.c, import.c, keygen.c: Be consistent in some
more quoted strings. Always use 'user ID', not 'user id', "quotes" for
user IDs, etc.
* g10.c: Make -K an alias for --list-secret-keys.
* keylist.c (print_card_serialno): New. Taken from gnupg 1.9.11.
(list_keyblock_print): Make use of it.
* keyedit.c (show_key_with_all_names): Print the card S/N.
* keyedit.c (keyedit_menu): New command ADDCARDKEY.
* card-util.c (card_generate_subkey): New.
* keygen.c (generate_card_subkeypair): New.
(gen_card_key): New arg IS_PRIMARY; changed all callers.
* cardglue.c (open_card): Use shutdown code if possible.
(check_card_serialno): Ditto.
* configure.ac: Check for readline. Make enable-card-support the
default. New option --without-readline. Allow the use of either
the development or the stable libusb.
* cardglue.h: Add members for CA fingerprints.
* cardglue.c (agent_release_card_info): Invalid them.
(learn_status_cb): Store them.
* app-common.h, app-openpgp.c, iso7816.c, iso7816.h
* apdu.c, apdu.h, ccid-driver.c, ccid-driver.h
* card-util.c: Updated from current gnupg-1.9.
* ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New.
* ccid-driver.c (ccid_open_reader): Support the stable 0.1 version
of libusb.
(ccid_get_atr): Handle short messages.
* apdu.c (my_rapdu_get_status): Implemented.
* apdu.c: Include <signal.h>.
* apdu.c (reader_table_s): Add function pointers for the backends.
(apdu_close_reader, apdu_get_status, apdu_activate)
(send_apdu): Make use of them.
(new_reader_slot): Intialize them to NULL.
(dump_ccid_reader_status, ct_dump_reader_status): New.
(dump_pcsc_reader_status): New.
(open_ct_reader, open_pcsc_reader, open_ccid_reader)
(open_osc_reader, open_rapdu_reader): Intialize function pointers.
(ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu)
(error_string): Removed. Replaced by apdu_strerror.
(get_ccid_error_string): Removed.
(ct_activate_card): Remove the unused loop.
(reset_ct_reader): Implemented.
(ct_send_apdu): Activate the card if not yet done.
(pcsc_send_apdu): Ditto.
* ccid-driver.h: Add error codes.
* ccid-driver.c: Implement more or less proper error codes all
over the place.
* apdu.c (apdu_send_direct): New.
(get_ccid_error_string): Add some error code mappings.
(send_apdu): Pass error codes along for drivers already supporting
them.
(host_sw_string): New.
(get_ccid_error_string): Use above.
(send_apdu_ccid): Reset the reader if it has not yet been done.
(open_ccid_reader): Don't care if the ATR can't be read.
(apdu_activate_card): New.
(apdu_strerror): New.
(dump_reader_status): Only enable it with opt.VERBOSE.
* iso7816.c (map_sw): Add mappings for the new error codes.
* apdu.c (open_ct_reader, open_pcsc_reader, open_ccid_reader)
(reset_ccid_reader, open_osc_reader): Call dump_reader_status only
in verbose mode.
* app-openpgp.c (do_getattr): Fix for sending CA-FPR.
* app-openpgp.c (app_openpgp_readkey): Fixed check for valid
exponent.
* app-openpgp.c (do_setattr): Sync FORCE_CHV1.
* card-util.c (change_login): Kludge to allow reading data from a
file.
(card_edit): Pass ARG_STRING to change_login.
(card_status): Print CA fingerprints.
(change_cafpr): New.
(card_edit): New command CAFPR.
* errors.h (G10ERR_NO_CARD, G10ERR_CANCELED): New error codes.
* errors.c (g10_errstr): New error codes G10ERR_NO_CARD,
G10ERR_CANCELED.
Changed all callers.
* cardglue.c (pin_cb): Use it here, so the machine interface can
tell whether the Admin PIN is requested.
* cardglue.c (agent_scd_checkpin): New.
* misc.c (openpgp_pk_algo_usage): Added AUTH usage.
* app-openpgp.c (check_against_given_fingerprint): New. Factored
out that code elsewhere.
(do_check_pin): New.
* card-util.c (card_edit): New command "passwd". Add logic to
check the PIN in advance.
(card_status): Add new args to return the serial number. Changed
all callers.
requested.
(genkey_status_cb): New.
(agent_scd_genkey): Implemented.
* keygen.c (generate_keypair): New arg CARD_SERIALNO and prepare
parameters for on card key generation. Changed all callers.
(do_generate_keypair): Add new arg card and merged casrd specific
changes from 1.9.
(proc_parameter_file): New arg card, apss it down to
do_generate_keypair and changed all callers.
(gen_card_key): New.
* g10.c: Include cardclue.h.
(main): s/app_set_default_reader_port/card_set_reader_port/.
* cardglue.c (card_set_reader_port): New to address include file
issues.
so that it can be used by getattr to update the structure.
(agent_scd_getattr): New.
* keylist.c (print_pubkey_info): Add FP arg for optional printing
to a stream. Changed all callers.
--change-pin. New options --ctapi-driver, --pcsc-driver and
--disable-ccid
* options.h (DBG_CARD_IO): New.
* cardglue.c, cardclue.h: Enhanced.
* card-util.c: New. Taken from current the gnupg 1.9 branch.
* app-common.h, app-openpgp.c, iso7816.c, iso7816.h, apdu.c
* apdu.h, ccid-driver.c, ccid-driver.h: New. Takem from the current
gnupg 1.9 branch withy minor changes to include directives.
* Makefile.am: Added these files.
default and tehre is not yet much more than a new configure option.
* configure.ac (LIBUSB_LIBS,HAVE_LIBUSB): Check for Libusb.
(--enable-card-support): New.
* sign.c (do_sign) [ENABLE_CARD_SUPPORT]: Divert to card.
* cardglue.c, cardglue.h: New.
* Makefile.am (gpg_LDADD): Added.
(card_support_sources): New.
* memory.h (xmalloc): Define xmalloc macros in terms of m_alloc.
