* common/sysutils.c (gnupg_fopen) [W32]: Use _wfopen if needed. Use
new function in most places where fopen is used.
--
The config files in 2.2 are still read using fopen - we need to change
this to allow Unicode directory names. There is also one case where
files are written using the old fopen. The new option parser in 2.3
does not have this problem but at some places fopen is also still used.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.c (ccid_require_get_status): For VENDOR_SCM reader,
return 0 only at the initial call.
(bulk_in): Don't detect an error for VENDOR_SCM reader, just kicking
the loop, to invoke scd_update_reader_status_file, which calls
ccid_slot_status again.
(ccid_slot_status): Move the call of ccid_vendor_specific_setup to...
(ccid_get_atr): ... here.
--
For readers with interrupt transfer support, it is only intr_cb which
sets handle->powered_off to 1. Keeping this condition makes no race.
The function ccid_slot_status can also detect a communication error,
which causes apdu_close_reader (but not setting ->powered_off).
GnuPG-bug-id: 5121
Fixes-commit: 920f258eb6018ecec1d63bad6a0fb0772f72affa
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 484bafda4dbf5ffe9e7c41ef24fbc5bd791a3b32)
* scd/command.c (reset_notify): Add option --keep-lock.
(do_reset): Add arg keep_lock.
(cmd_lock): Send progress status.
* g10/call-agent.c (agent_scd_apdu): Add more pseudo APDUs.
* g10/card-util.c (send_apdu): Ditto.
(factory_reset): Use lock commands.
--
This is required so that for example Kleopatra does not detect the
RESET and issues a SERIALNO of its own, thus conflicting with our
SERIALNO undefined.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.c (ccid_vendor_specific_setup): New. Limit
only for SPR532, excluding other readers by SCM.
(ccid_slot_status): Use ccid_vendor_specific_setup.
--
We follow the setup procedure of libccid implementation, which sends
the escape command for SPR532 only.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported-from-master: 390497ea115e1aca93feec297a5bd6ae7b1ba6dd
* scd/ccid-driver.c (ccid_slot_status): Handle LIBUSB_ERROR_TIMEOUT.
--
Backport master commit of:
b1e8072320c19246962beb6d67dc5784b5a72364
With SPR532, at the first connection, it fails by
LIBUSB_ERROR_TIMEOUT, but no retry.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (intr_cb): Handle the case of multiple messages.
--
Backport master commit of:
7cbb513a2dc150a90a30c53316970df2a439d494
SPR532 USB Smart Card Reader (also know as SPR332) may send two
messages at once for a single interrupt transfer. An example transfer
observed was like: 50 03 50 02, which is considered valid, according
to the CCID specification.
GnuPG-bug-id: 5065
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (CCID_CMD_TIMEOUT_LONGER): Remove.
(ccid_transceive): Don't use x4 blindly for bBWI, but use dynamically
determined value. Use value from variable wait_more for bulk_in.
Set wait_more by the value of time extension request.
--
Backport master commit of:
f1cf799a37f320d33cae445c74f3fc1936dd9995
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c: Support a test program by ccid-driver.
--
Backport from master commit:
b31060425226b45deb21915bf5cd8b6ba62bd098
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.h (CCID_DRIVER_ERR_USB_*): New error codes.
* scd/apdu.h: New SW_HOST error codes.
* scd/apdu.c (host_sw_string): Print them
* scd/ccid-driver.c (map_libusb_error): New.
(ccid_open_usb_reader, bulk_in, abort_cmd): Map libusb error codes.
* scd/iso7816.c (map_sw): Map new codes to gpg-error.
--
Backport from master commit:
9a8d7e41bba1926158a21ebdda542241493ef983
This change will help to get low level error conditions from hipher
application code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.c (ccid_open_usb_reader): Alway submit SET_INTERFACE
control transfer.
--
Backport from master commit:
611faf1579a56925994d53eb08e1290a4b3958cf
This handling is not mondatory, but it's better to do so, because
there are card reader with pinpad and token with ack button, which
support user interaction.
User interaction status should be reset at open time. The status
should be reset when the session is closed/stopped. In practice,
since cleanup routine in a driver may not be called properly, it's
good to submit SET_INTERFACE at open time.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (print_error) [TEST]: Add missing break. Note
that this is anyway an impossible case.
--
Backport master commit of:
8fb14d3b3f9c5c27ff8b9f0e7e7207ec388687ff
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (verify_chv2): Check availability of keys in
question.
--
Backport master commit of:
af189be481df02a77e088aa0a60a1fc02dfa12bf
With buggy Gnuk (<= 1.2.15), when no encr/auth keys are available,
it fails decrementing the signature error counter. This change
can avoid the issue.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/logging.c (log_printhex): Chnage order of args. Make it
printf alike. Change all callers.
* configure.ac: Add -Wno-format-zero-length
--
This makes it consistent with modern libgpgrt logging and thus eases
back porting from newer GnuPG versions which use libgpgrt logging.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (make_pin_prompt): Factor some code out to ...
(get_dispserialno): this.
(do_getattr): Use new fucntion for a $DISPSERIALNO.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (struct prkdf_object_s): New fields common_name and
serial_number.
(release_prkdflist): Free them.
(keygrip_from_prkdf): Parse cert and set them.
(any_control_or_space): New.
(make_pin_prompt): New.
(verify_pin): Construct a pretty PIN prompt.
(do_sign): Remove debug output.
--
The D-Trust card has the SerialNumber part of the Subject printed on
the front matter, we assume this is also possible with other cards and
thus we show this as serial number.
The holder of the card is also extracted from the card's subject.
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported from master.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (map_sw): Detect 0x63Cn status code.
--
I really wonder when that got lost and we ended up with a simple card
error.
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported from master.
* scd/iso7816.c (iso7816_select_mf): New.
* scd/app-p15.c (card_product_t): New.
(struct app_local_s): Add field 'card_product'.
(read_ef_tokeninfo): Detect D-Trust card.
(prepare_verify_pin): Switch to D-Trust AID.
(do_decipher): Restore a SE for D-TRust cards. Change the padding
indicator to 0x81.
* common/percent.c (percent_data_escape): new. Taken from master.
--
Using what I learned from a USB trace running the Governikus Signer
Software on Windows this fixes the left over problem with the new
D-Trust card support.
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported from master. This required to add the percent_data_escape
function we introduced in master on 2018-07-02:
commit 58baf40af641f8cbf597e508a292e85ae94688f1
common: New function percent_data_escape.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (read_ef_tokeninfo): Store manufacturer_id.
(do_getattr): Implement MANUFACTURER, $ENCRKEYID and $SIGNKEYID.
(send_keypairinfo): Also print usage flags.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported from master.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (get_manufacturer): New..
(do_getattr): Add new attribute "MANUFACTURER".
(do_learn_status): Always print it.
--
This will make it easy to maintain the list of OpenPGP vendors at just
one place.
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported from master:
.. or well in master and 2.2
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c: Rename keyinfo to prkdf.
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported from master. Removed the do_with_keygrip related parts
because that function is not available.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (struct prkdf_object_s): Add flag pin_verified.
(verify_pin): Make use of it.
--
Theee is still a problem with the APDUs we send: Switching between
signing and decryption does work but not in the other way.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (do_decipher): Get the keygrip.
--
This was lost during the backport.
Fixes-commit: 4af38ea5e450b3eb79af98b9876b2b968110a459
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (do_decipher): New.
--
tested using the D-TRUSt card and a SCR3310 reader. The Kobil KAAN
Advanced, I used for the signing tests could not be used because it
supports only Short APDU Level exchange.
Signed-off-by: Werner Koch <wk@gnupg.org>
Back ported from master.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (do_sign): Factor code out to ...
(prepare_verify_pin, verify_pin): new functions.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
Bakc ported from master
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-help.c (app_help_get_keygrip_string_pk): Add optional arg
r_pkey and change all callers.
(app_help_get_keygrip_string): Ditto.
* scd/app-p15.c (struct cdf_object_s): Use bit flags
(struct aodf_object_s): Ditto. Add field 'fid'.
(struct prkdf_object_s): Ditto. Add fields keygrip, keyalgo, and
keynbits.
(parse_certid): Allow a keygrip instead of a certid aka keyref.
(read_ef_aodf): Store the FID.
(keygripstr_from_prkdf): Rename to ...
(keygrip_from_prkdf): this. Remove arg r_gripstr and implement cache.
Change callers to directly use the values from the object. Also store
the algo and length of the key ion the object.
(keyref_from_keyinfo): New. Factored out code.
(do_sign): Support SHA-256 and >2048 bit RSA keys.
common/scd:p15: Support signing with CardOS 5 cards.
* common/util.h (KEYGRIP_LEN): New.
--
This has been tested with a D-Trust card featuring 3072 bit keys.
Note that non-repudiation key for a qualified signature does not yet
work because we do not yet support rsaPSS padding. Thus a gpgsm
--learn shows a couple of Bad Signature errors for this key.
Signed-off-by: Werner Koch <wk@gnupg.org>
Back ported from master:
- Removed do_with_keygrip
- Added KEYGRIP_LEN
- app_help_get_keygrip_string_pk actually added.
- Move keygrip_from_prkdf in do_sign before the verification.
It used to work in master only because there it is implictly
called prior to signing by do_with_keygrip
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_read_binary): Factor code out to ...
(iso7816_read_binary_ext): new function. Add arg extended_mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
This removes almost all log_debug calls and uses opt.verbose and
log_info to show card information. Also avoid too long and thus
harder to read lines.
Signed-off-by: Werner Koch <wk@gnupg.org>
(back ported from master)
* scd/app-p15.c (read_ef_odf): Detect the home_DF on the fly. Silence
the garbage warning for null bytes.
(print_tokeninfo_tokenflags): New.
(read_ef_tokeninfo): Print manufacturer, label, and flags.
(app_select_p15): No need to use the app_get_slot macro.
(CARD_TYPE_CARDOS_50): New const.
(card_atr_list): Detect CardOS 5.0
--
The card under test is a "Test-Signaturkarte D-TRUST Card 3.1" for a
mere 49 Euro and no specs available. D-Trust is a branch of the
German Bundesdruckerei. Compare that to Telesec and Yubikey who have
always been nice enough to send bunches of sample cards without a need
to wade through lots of forms and not even asking for money. Guess
which cards I prefer.
Signed-off-by: Werner Koch <wk@gnupg.org>
(backported from master)
