* agent/gpg-agent.c (oDebugPinentry): New.
(opts): Add --debug-pinentry.
(parse_rereadable_options): Set that option.
* agent/call-pinentry.c (start_pinentry): Pass option to
assuan_set_flag.
--
This option is quite useful to see the IPC between gpg-agent and
Pinentry. Note that "debug 1024" is also required.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/logging.h: Rename JNLIB_LOG_* to GPGRT_LOG_*.
* common/mischelp.h: Rename JNLIB_GCC_* to GPGRT_GCC_*.
--
JNLIB has no more meaning. Thus we switch to a GPGRT_ prefix in
anticipation that some code may eventually be moved to libgpg-error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (agent_askpin): Add args keyinfo and
cache_mode. Change all callers to pass (NULL,0) for them. Send
SETKEYINFO command.
* agent/findkey.c (unprotect): Pass the keygrip and the cache_mode for
the new args.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/cvt-openpgp.c (extract_private_key): Add arg "arraysize".
Make sure that R_FLAGS and R_CURVE are set to NULL.
--
Given that extract_private_key is not file local it is good to have some
extra asserts to protect against future wrong use.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/cvt-openpgp.c (extract_private_key): New.
(convert_to_openpgp): Use extract_private_key.
* agent/findkey.c (agent_public_key_from_file): Use
extract_private_key.
--
This patch add support of ECC key with a curve name and flags. Since
same functionality is also needed for convert_to_openpgp, it was
factored out into the extract_private_key function.
* agent/command-ssh.c (setup_ssh_env): Move code to ...
* agent/gpg-agent.c (agent_copy_startup_env): .. new function. Change
calllers.
* agent/command.c (start_command_handler): Call that fucntion for
restricted connections.
--
A remote connection is and should not be able to setup the local
session environment. However, unless --keep-display is used we would
be left without an environment and thus pinentry can't be used. The
fix is the same as used for ssh-agent connection: We use the default
environment as used at the startup of the agent.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_learn): Add option --sendinfo.
* agent/learncard.c (agent_handle_learn): Add arg "send" andsend
certifciate only if that is set.
* g10/call-agent.c (agent_scd_learn): Use --sendinfo. Make INFO
optional.
(agent_learn): Remove.
* g10/keygen.c (gen_card_key): Replace agent_learn by agent_scd_learn.
--
The requirement of using --card-status on the first use of card on a
new box is a bit annoying but the alternative of always checking
whether a card is available before a decryption starts does not sound
promising either.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Add field extra_socket.
(server_control_s): Add field restricted.
* agent/command.c: Check restricted flag on many commands.
* agent/gpg-agent.c (oExtraSocket): New.
(opts): Add option --extra-socket.
(socket_name_extra): New.
(cleanup): Cleanup that socket name.
(main): Implement oExtraSocket.
(create_socket_name): Add arg homedir and change all callers.
(create_server_socket): Rename arg is_ssh to primary and change
callers.
(start_connection_thread): Take ctrl as arg.
(start_connection_thread_std): New.
(start_connection_thread_extra): New.
(handle_connections): Add arg listen_fd_extra and replace the
connection starting code by parameterized loop.
* common/asshelp.c (start_new_gpg_agent): Detect the use of the
restricted mode and don't fail on sending the pinentry environment.
* common/util.h (GPG_ERR_FORBIDDEN): New.
* agent/agent.h (struct pin_entry_info_s): Add fields repeat_okay and
with_repeat.
* agent/call-pinentry.c (close_button_status_cb): Rewrite and check
for PIN_REPEAT. Change users to check only the relevant bit.
(agent_askpin): Support repeat logic of new Pinentries.
* agent/command-ssh.c (ssh_identity_register): Use the new repeat
feature.
* agent/genkey.c (agent_ask_new_passphrase): Ditto.
--
If we need to confirm a passphrase entry (e.g. for new passphrase) we
set a flag into the pinentry info block. The we try to use the new
pinentry command SETREPEATERROR; if that fails, we continue as usual.
If that succeeds we ask the pinentry to show the repeat (confirmation)
prompt and on successful return we set another flag in the pinentry
info block so that the caller can skip its own confirmation check. A
new status line from the pinentry indicates that the feature is
actually supported (it may not be supported on certain systems for
example when using the ncurses backend).
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Remove field use_standard_socket.
* agent/command.c (cmd_killagent): Always allow killing.
* agent/gpg-agent.c (main): Turn --{no,}use-standard-socket and
--write-env-file into dummy options. Always return true for
--use-standard-socket-p. Do not print the GPG_AGENT_INFO envvar
setting or set that envvar.
(create_socket_name): Simplify by removing non standard socket
support.
(check_for_running_agent): Ditto.
* common/asshelp.c (start_new_gpg_agent): Remove GPG_AGENT_INFO use.
* common/simple-pwquery.c (agent_open): Ditto.
* configure.ac (GPG_AGENT_INFO_NAME): Remove.
* g10/server.c (gpg_server): Do not print the AgentInfo comment.
* g13/server.c (g13_server): Ditto.
* sm/server.c (gpgsm_server): Ditto.
* tools/gpgconf.c (main): Simplify by removing non standard socket
support.
--
The indented fix to allow using a different socket than the one in the
gnupg home directory is to change Libassuan to check whether the
socket files exists as a regualr file with a special keyword to
redirect to another socket file name.
* agent/cache.c (last_stored_cache_key): New.
(agent_get_cache): Allow NULL for KEY.
(agent_store_cache_hit): New.
* agent/findkey.c (unprotect): Call new function and try to use the
last stored key.
* g10/revoke.c (create_revocation): Add arg CACHE_NONCE and pass to
make_keysig_packet.
(gen_standard_revoke): Add arg CACHE_NONCE and pass to
create_revocation.
* g10/keygen.c (do_generate_keypair): Call gen_standard_revoke with
cache nonce.
--
This patch adds two features:
1. The key for the last passphrase successfully used for unprotecting
a key is stored away. On a cache miss the stored away passphrase is
tried as well. This helps for the common GPG use case of having a
signing and encryption (sub)key with the same passphrase. See the
code for more comments.
2. The now auto-generated revocation certificate does not anymore
popup a passphrase prompt. Thus for standard key generation the
passphrase needs to be given only once (well, two with the
confirmation).
* agent/gpg-agent.c [W32]: Include Several Windows header.
(opts): Change help text for enable-ssh-support.
(opts, main): Add option --enable-putty-support
(putty_support, PUTTY_IPC_MAGIC, PUTTY_IPC_MAXLEN): New for W32.
(agent_init_default_ctrl): Add and asssert call.
(putty_message_proc, putty_message_thread): New.
(handle_connections) [W32]: Start putty message thread.
* common/sysutils.c (w32_get_user_sid): New for W32 only
* tools/gpgconf-comp.c (gc_options_gpg_agent): Add
--enable-ssh-support and --enable-putty-support. Make the
configuration group visible at basic level.
* agent/command-ssh.c (serve_mmapped_ssh_request): New for W32 only.
--
This patch enables support for Putty. It has been tested with Putty
0.62 using an Unix created ssh key copied to the private-keys-v1.d
directory on Windows and with a manually crafted sshcontrol file. It
also works with a smartcard key.
May thanks to gniibe who implemented a proxy in Python to test the
putty/gpg-agent communication.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 9f32499f99)
Resolved conflicts:
NEWS
agent/agent.h
agent/gpg-agent.c: Convert from pth to npth.
common/sysutils.c
common/sysutils.h
* agent/findkey.c (key_parms_from_sexp): Add algo name "ecc".
(agent_is_dsa_key): Ditto.
(agent_is_eddsa_key): New. Not finished, though.
* agent/pksign.c (do_encode_eddsa): New.
(agent_pksign_do): Use gcry_log_debug functions.
* agent/protect.c (agent_protect): Parse a flags parameter.
* g10/keygen.c (gpg_curve_to_oid): Move to ...
* common/openpgp-oid.c (openpgp_curve_to_oid): here and rename.
(oid_ed25519): New.
(openpgp_oid_is_ed25519): New.
(openpgp_oid_to_curve): New.
* common/t-openpgp-oid.c (test_openpgp_oid_is_ed25519): New.
* g10/build-packet.c (gpg_mpi_write): Write the length header also for
opaque MPIs.
(gpg_mpi_write_nohdr): New.
(do_key): Use gpg_mpi_write_nohdr depending on algorithm.
(do_pubkey_enc): Ditto.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Use
gpg_mpi_write_nohdr.
* g10/export.c (transfer_format_to_openpgp):
* g10/keygen.c (ecckey_from_sexp): Return the error.
(gen_ecc): Repalce arg NBITS by CURVE.
(read_parameter_file): Add keywords "Key-Curve" and "Subkey-Curve".
(ask_curve): New.
(generate_keypair, generate_subkeypair): Use ask_curve.
(do_generate_keypair): Also pass curve name.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Print
curve name.
* g10/parse-packet.c (mpi_read): Remove workaround for
Libcgrypt < 1.5.
(parse_key): Fix ECC case. Print the curve name.
* g10/pkglue.c (mpi_from_sexp): Rename to get_mpi_from_sexp.
(pk_verify, pk_check_secret_key): Add special case for Ed25519.
* g10/seskey.c (encode_md_value): Ditto.
* g10/sign.c (do_sign, hash_for, sign_file): Ditto.
--
Be warned that this code is subject to further changes and that the
format will very likely change before a release. There are also known
bugs and missing code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (APP_DECIPHER_INFO_NOPAD): New.
* scd/app-openpgp.c (do_decipher): Add arg R_INFO.
* scd/app-nks.c (do_decipher): Add arg R_INFO as a dummy.
* scd/app.c (app_decipher): Add arg R_INFO.
* scd/command.c (cmd_pkdecrypt): Print status line "PADDING".
* agent/call-scd.c (padding_info_cb): New.
(agent_card_pkdecrypt): Add arg R_PADDING.
* agent/divert-scd.c (divert_pkdecrypt): Ditto.
* agent/pkdecrypt.c (agent_pkdecrypt): Ditto.
* agent/command.c (cmd_pkdecrypt): Print status line "PADDING".
* g10/call-agent.c (padding_info_cb): New.
(agent_pkdecrypt): Add arg R_PADDING.
* g10/pubkey-enc.c (get_it): Use padding info.
--
Decryption using a card never worked in gpg 2.1 because the
information whether the pkcs#1 padding needs to be removed was not
available. Gpg < 2.1 too this info from the secret sub key but that
has gone in 2.1.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (struct control_file_s): Rename to
ssh_control_file_s.
(ssh_open_control_file, ssh_close_control_file)
(ssh_read_control_file, ssh_search_control_file): New.
(control_file_t): Rename and move to ...
* agent/agent.h (ssh_control_file_t): here.
* agent/command.c (do_one_keyinfo): Add args is_ssh, ttl, disabled,
and confirm. Rename unknown keytype indicator from '-' to 'X'. Extend
output.
(cmd_keyinfo): Add options --ssh-list and --with-ssh.
--
This extension allows the development of frontends to manage the
sshcontrol file.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_import_key): Add option --unattended.
* agent/cvt-openpgp.c (convert_transfer_key): New.
(do_unprotect): Factor some code out to ...
(prepare_unprotect): new function.
(convert_from_openpgp): Factor all code out to ...
(convert_from_openpgp_main): this. Add arg 'passphrase'. Implement
openpgp-native protection modes.
(convert_from_openpgp_native): New.
* agent/t-protect.c (convert_from_openpgp_native): New dummy fucntion
* agent/protect-tool.c (convert_from_openpgp_native): Ditto.
* agent/protect.c (agent_unprotect): Add arg CTRL. Adjust all
callers. Support openpgp-native protection.
* g10/call-agent.c (agent_import_key): Add arg 'unattended'.
* g10/import.c (transfer_secret_keys): Use unattended in batch mode.
--
With the gpg-agent taking care of the secret keys, the user needs to
migrate existing keys from secring.gpg to the agent. This and also
the standard import of secret keys required the user to unprotect the
secret keys first, so that gpg-agent was able to re-protected them
using its own scheme. With many secret keys this is quite some
usability hurdle. In particular if a passphrase is not instantly
available.
To make this migration smoother, this patch implements an unattended
key import/migration which delays the conversion to the gpg-agent
format until the key is actually used. For example:
gpg2 --batch --import mysecretkey.gpg
works without any user interaction due to the use of --batch. Now if
a key is used (e.g. "gpg2 -su USERID_FROM_MYSECRETKEY foo"), gpg-agent
has to ask for the passphrase anyway, converts the key from the
openpgp format to the internal format, signs, re-encrypts the key and
tries to store it in the gpg-agent format to the disk. The next time,
the internal format of the key is used.
This patch has only been tested with the old demo keys, more tests
with other protection formats and no protection are needed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/agent-opt.c: New.
* common/shareddefs.h: New.
* common/Makefile.am: Add new files.
* agent/agent.h: Include shareddefs.h.
(pinentry_mode_t): Factor out to shareddefs.h.
* agent/command.c (option_handler): Use parse_pinentry_mode.
This is not yet fully implemented. It will eventually allow to
support pinpad equipped readers which do not support variable length
pin lengths.
* agent/protect.c (parse_shadow_info): Add optional arg R_PINLEN and
parse pinlen info. Change all callers to pass NULL for it.
When this mode is set an inquire will be sent to the client to retrieve
the passphrase. This adds a new inquire keyword "NEW_PASSPHRASE" that the
GENKEY and PASSWD commands use when generating a new key.
The protection used in the exported key used a different iteration
count than given in the S2K field. Thus all OpenPGP keys exported
from GnuPG 2.1-beta can't be imported again. Given that the actual
secret key material is kept in private-keys-v1.d/ the can be
re-exported with this fixed version.
This was a regression in 2.1 introduced due to having the agent do the
signing in contrast to the old "SCD PKSIGN" command which accesses the
scdaemon directly and passed the hash algorithm. The hash algorithm
is used by app-openpgp.c only for a sanity check.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
* protect-tool.c (get_passphrase): New arg OPT_CHECK.
(get_new_passphrase): Enable OTP_CHECK on the first call.
* command.c (cmd_get_passphrase): Implement option --check.
* gpg-agent.c (MIN_PASSPHRASE_LEN): New
(parse_rereadable_options): New option --min-passphrase-len.
* genkey.c (check_passphrase_constraints): New.
(agent_genkey, agent_protect_and_store): Call new function. Fix
memory leak.
* call-pinentry.c (agent_askpin): Allow translation of the displayed
error message.
(agent_popup_message_start): Remove arg CANCEL_BTN.
(popup_message_thread): Use --one-button option.
* command.c (cmd_passwd): Now that we don't distinguish between
assuan and regular error codes we can jump to the end on error.
common/
* simple-pwquery.c (simple_pwquery): New arg OPT_CHECK.
char * vs. unsigned char * warnings. The GNU coding standards used to
say that these mismatches are okay and better than a bunch of casts.
Obviously this has changed now.
* gpg-agent.c: New option --write-env-file.
* gpg-agent.c (handle_connections): Make sure that the signals we
are handling are not blocked.Block signals while creating new
threads.
* estream.c: Use HAVE_CONFIG_H and not USE_CONFIG_H!
(es_func_fd_read, es_func_fd_write): Protect against EINTR.
* gpg-agent.texi (Agent UPDATESTARTUPTTY): New.
* scdaemon.c (handle_connections): Make sure that the signals we
are handling are not blocked.Block signals while creating new
threads.
(handle_connections): Include the file descriptor into the name of
the thread.
* dynload.h: s/__inline__/inline/.
* tlv.c [GNUPG_MAJOR_VERSION==1]: Define constants instead of
including a gnupg 1.4 header.
* watchgnupg.c: Make sure that PF_LCOAL and AF_LOCAL are defines.
Noted by Ray Link.
(agent_scd_check_aliveness): New.
* gpg-agent.c (handle_tick): Test for an alive scdaemon.
(handle_signal): Print thread info on SIGUSR1.
* scdaemon.c (handle_signal): Print thread info on SIGUSR1.
%0A may pass through.
* agent.h (server_control_s): New field USE_AUTH_CALL.
* call-scd.c (agent_card_pksign): Make use of it.
* command-ssh.c (data_sign): Set the flag.
(ssh_send_key_public): New arg OVERRIDE_COMMENT.
(card_key_available): Add new arg CARDSN.
(ssh_handler_request_identities): Use the card s/n as comment.
(sexp_key_extract): Use GCRYMPI_FMT_STD.
(data_sign): Ditto.
* learncard.c (make_shadow_info): Moved to ..
* protect.c (make_shadow_info): .. here. Return NULL on malloc
failure. Made global.
* agent.h: Add prototype.
* xasprintf.c (xtryasprintf): New.
* app-openpgp.c (get_public_key): Make sure not to return negative
numbers.
(do_sign): Allow passing of indata with algorithm prefix.
(do_auth): Allow OPENPGP.3 as an alternative ID.
* app.c (app_getattr): Return just the S/N but not the timestamp.
* no-libgcrypt.c (gcry_strdup): New.
../g10/call-agent.c
(card_getattr_cb, agent_card_getattr): New.
* command-ssh.c (card_key_available): New.
(ssh_handler_request_identities): First see whether a card key is
available.
* app.c (app_getattr): Return APPTYPE or SERIALNO type even if the
application does dot support the getattr call.
* app.c (select_application): Return an error code and the
application context in an new arg.
* command.c (open_card): Adjusted for that. Don't use the
fallback if no card is present. Return an error if the card has
been removed without a reset.
(do_reset, cmd_serialno): Clear that error flag.
(TEST_CARD_REMOVAL): New. Use it with all command handlers.
(scd_update_reader_status_file): Set the error flag on all changes.
(ssh_identity_register): Partly rewritten.
(open_control_file, search_control_file, add_control_entry): New.
(ssh_handler_request_identities): Return only files listed in our
control file.
* findkey.c (unprotect): Check for allocation error.
* agent.h (opt): Add fields to record the startup terminal
settings.
* gpg-agent.c (main): Record them and do not force keep display
with --enable-ssh-support.
* command-ssh.c (start_command_handler_ssh): Use them here.
* gpg-agent.c: Renamed option --ssh-support to
--enable-ssh-support.
* command.c (cmd_readkey): New.
(register_commands): Register new command "READKEY".
* command-ssh.c (ssh_request_process): Improved logging.
* findkey.c (agent_write_private_key): Always use plain open.
Don't depend on an umask for permissions.
(agent_key_from_file): Factored file reading code out to ..
(read_key_file): .. new function.
(agent_public_key_from_file): New.
1.9.
* agent.h (agent_exit): Add JNLIB_GCC_A_NR to indicate that this
function won't return.
* gpg-agent.c (check_for_running_agent): Initialize pid to a
default value if not needed.
* command-ssh.c: Removed stdint.h. s/byte_t/unsigned char/,
s/uint32/u32/ becuase that is what we have always used in GnuPG.
(ssh_request_specs): Moved to top of file.
(ssh_key_types): Ditto.
(make_cstring): Ditto.
(data_sign): Don't use a variable for the passphrase prompt, make
it translatable.
(ssh_request_process):
* findkey.c (modify_description): Renamed arguments for clarity,
polished documentation. Make comment a C-string. Fixed case of
DESCRIPTION being just "%".
(agent_key_from_file): Make sure comment string to a C-string.
* gpg-agent.c (create_socket_name): Cleanup the implemntation, use
DIMof, agent_exit, removed superflous args and return the
allocated string as value. Documented. Changed callers.
(create_server_socket): Cleanups similar to above. Changed callers.
(cleanup_do): Renamed to ..
(remove_socket): .. this. Changed caller.
(handle_connections): The signals are to be handled in the select
and not in the accept. Test all FDs after returning from a
select. Remove the event tests from the accept calls. The select
already assured that the accept won't block.
* command-ssh.c: New file.
* Makefile.am (gpg_agent_SOURCES): New source file: command-ssh.c.
* findkey.c (modify_description): New function.
(agent_key_from_file): Support comment field in key s-expressions.
* gpg-agent.c (enum cmd_and_opt_values): New item: oSSHSupport.
(opts) New entry for oSSHSupport.
New variable: socket_name_ssh.
(cleanup_do): New function based on cleanup().
(cleanup): Use cleanup_do() for socket_name and socket_name_ssh.
(main): New switch case for oSSHSupport.
(main): Move socket name creation code to ...
(create_socket_name): ... this new function.
(main): Use create_socket_name() for creating socket names for
socket_name and for socket_name_ssh in case ssh support is
enabled.
Move socket creation code to ...
(create_server_socket): ... this new function.
(main): Use create_server_socket() for creating sockets.
In case standard_socket is set, do not only store a socket name in
socket_name, but also in socket_name_ssh.
Generate additional environment info strings for ssh support.
Pass additional ssh socket argument to handle_connections.
(start_connection_thread_ssh): New function.
(handle_connections): Use select to multiplex between gpg-agent
and ssh-agent protocol.
* agent.h (struct opt): New member: ssh_support.
Declare function: start_command_handler_ssh.
* Makefile.am (gpg_preset_passphrase_LDADD): Reorder libs so that
pwquery may use stuff from jnlib. Conditionally add -lwsock2
(gpg_protect_tool_LDADD): Ditto.
* preset-passphrase.c (main): Use default_homedir().
(main) [W32]: Initialize sockets.
* simple-pwquery.c (agent_open) [W32]: Implement for W32.
(readline) [W32]: Use recv instead of read.
(writen) [W32]: Use send instead of write.
(my_stpcpy): Define a stpcpy replacement so that this file
continues to be self-contained.
(agent_send_all_options) [W32]: Don't call ttyname.
* gnupg-badge-openpgp.eps, gnupg-badge-openpgp.jpg: New
* gnupg.texi: Add a logo.
* sysnotes.texi: New.
* gpgsm.c (main): Use default_homedir().
(main) [W32]: Default to disabled CRL checks.
* gpgconf-comp.c (get_config_pathname) [DOSISH]: Detect absolute
pathnames with a drive letter.
now use the identical implementation from ../common/membuf.c.
* pksign.c (agent_pksign): Changed arg OUTFP to OUTBUF and use
membuf functions to return the value.
* pkdecrypt.c (agent_pkdecrypt): Ditto.
* genkey.c (agent_genkey): Ditto.
* command.c (cmd_pksign, cmd_pkdecrypt, cmd_genkey): Replaced
assuan_get_data_fp() by a the membuf scheme.
(clear_outbuf, write_and_clear_outbuf): New.
* membuf.c (put_membuf): Wipe out buffer after a failed realloc.
* agent.h: Declare: agent_pksign_do.
(struct server_control_s): New member: raw_value.
* pksign.c (do_encode_md): New argument: raw_value; support
generation of raw (non-pkcs1) data objects; adjust callers.
(agent_pksign_do): New function, based on code ripped
out from agent_pksign.
(agent_pksign): Use agent_pksign_do.
* command.c (start_command_handler): Set ctrl.digest.raw_value.
(start_connection_thread): Hack to simulate a ticker.
* trustlist.c (agent_trustlist_housekeeping)
(agent_reload_trustlist): New. Protected all global functions
here with a simple counter which is sufficient for Pth.
* fingerprint.c (gpgsm_get_key_algo_info): New.
* sign.c (gpgsm_sign): Don't assume RSA in the status line.
* keylist.c (list_cert_colon): Really print the algorithm and key
length.
(list_cert_raw, list_cert_std): Ditto.
(list_cert_colon): Reorganized to be able to tell whether a root
certificate is trusted.
(main): New option --allow-mark-trusted.
* trustlist.c (agent_marktrusted): Use it here.
* gpg-agent.texi (Agent Options): Add --allow-mark-trusted.
* gpgconf-comp.c: Add --allow-mark-trusted for the gpg-agent.
* genkey.c (reenter_compare_cb): Do not set the error text.
(agent_protect_and_store, agent_genkey): Force a re-enter after a
non-matching passphrase.
* query.c (agent_askpin): Add new arg INITIAL_ERRTEXT; changed
all callers.
* command.c (start_command_handler): Init it here.
* gpg-agent.c (agent_init_default_ctrl): and here.
* call-scd.c: Add the CTRL arg to all functions calling start_scd
and pass it to start_scd. Changed all callers
(start_scd): Keep track of the current active connection.
(agent_reset_scd): New.
* command.c (start_command_handler): Call it here.
* learncard.c (agent_handle_learn): Add arg CTRL; changed caller.
(send_cert_back): Ditto.
that we have more detailed error messages in the upper layers.
This fixes the handling pinentry's cancel button.
* pksign.c (agent_pksign): Changed accordingly.
* pkdecrypt.c (agent_pkdecrypt): Ditto.
* command.c (cmd_passwd): Ditto.
(agent_get_passphrase): Ditto.
* Makefile.am: Renamed the binary protect-tool to gpg-protect-tool.
* protect-tool.c: Removed the note about internal use only.
* gpg-agent.c (main): New option --daemon so that the program is
not accidently started in the background.
* findkey.c (agent_write_private_key,agent_key_from_file)
(agent_key_available): Use GNUPG_PRIVATE_KEYS_DIR constant.
* gpg-agent.c (main): Use GNUPG_DEFAULT_HOMEDIR constant.
* protect-tool.c (store_private_key): New.
(import_p12_file): Store the new file if requested.
(main): New options --force and --store.
* gpg-agent.c (main): Set a global flag when runing detached.
* query.c (start_pinentry): Pass the list of FD to keep in the
child when not running detached.
* call-scd.c (start_scd): Ditto.
* query.c (agent_askpin): Use the callback to check for a correct
PIN. Removed the start_err_text argument becuase it is not
anymore needed; changed callers.
* findkey.c (unprotect): Replace our own check loop by a callback.
(try_unprotect_cb): New.
* genkey.c (reenter_compare_cb): New.
(agent_genkey): Use this callback here. Fixed setting of the pi2
variable and a segv in case of an empty PIN.
* divert-scd.c (getpin_cb): Removed some unused stuff and
explained what we still have to change.
* call-scd.c: Seirialized all scdaeom access when using Pth.
* cache.c: Made the cache Pth-thread-safe.
(agent_unlock_cache_entry): New.
* findkey.c (unprotect): Unlock the returned cache value.
* command.c (cmd_get_passphrase): Ditto.
* gpg-agent.c (main): Register pth_read/write with Assuan.
* configure.ac: Check for locale.h.
agent/
2002-04-24 Marcus Brinkmann <marcus@g10code.de>
* agent.h (struct opt): Add members display, ttyname, ttytype,
lc_ctype, and lc_messages.
* gpg-agent.c (enum cmd_and_opt_values): Add oDisplay, oTTYname,
oTTYtype, oLCctype, and LCmessages.
(main): Handle these options.
* command.c (option_handler): New function.
(register_commands): Register option handler.
* query.c (start_pinentry): Pass the various display and tty
options to the pinentry.
sm/
2002-04-24 Marcus Brinkmann <marcus@g10code.de>
* gpgsm.h (struct opt): New members display, ttyname, ttytype,
lc_ctype, lc_messages.
* gpgsm.c (enum cmd_and_opt_values): New members oDisplay,
oTTYname, oTTYtype, oLCctype, oLCmessages.
(opts): New entries for these options.
(main): Handle these new options.
* call-agent.c (start_agent): Set the various display and tty
parameter after resetting.
* gpgsm.c: New command --learn-card
* call-agent.c (learn_cb,gpgsm_agent_learn): New.
* gpgsm.c (main): Print error messages for non-implemented commands.
agent/
* learncard.c: New.
* divert-scd.c (ask_for_card): The serial number is binary so
convert it to hex here.
* findkey.c (agent_write_private_key): New.
* genkey.c (store_key): And use it here.
scd/
* pkdecrypt.c (agent_pkdecrypt): Changed the way the diversion is done.
* divert-scd.c (divert_pkdecrypt): Changed interface and
implemented it.
used and divert the operation in this case.
* pkdecrypt.c (agent_pkdecrypt): Likewise
* findkey.c (agent_key_from_file): Add optional arg shadow_info
and have it return information about a shadowed key.
* protect.c (agent_get_shadow_info): New.
* protect.c (snext,sskip,smatch): Moved to
* sexp-parse.h: new file.
* divert-scd.c: New.
* protect.c (agent_private_key_type): New.
* agent.h: Add PRIVATE_KEY_ enums.
* findkey.c (agent_key_from_file): Use it to decide whether we
have to unprotect a key.
(unprotect): Cache the passphrase.
* findkey.c (agent_key_from_file,agent_key_available): The key
files do now require a ".key" suffix to make a script's life
easier.
* genkey.c (store_key): Ditto.
* cache.c: New.
* command.c (cmd_get_passphrase): Use the cache.
(cmd_clear_passphrase): Ditto.
* gpg-agent.c: Removed unused cruft and implement the socket
based server.
(my_strusage): Take bug report address from configure.ac.
* command.c (start_command_handler): Add an argument to start as
regular server.
(start_command_handler): Enable Assuan logging.
based server.
(my_strusage): Take bug report address from configure.ac.
* command.c (start_command_handler): Add an argument to start as
regular server.
(start_command_handler): Enable Assuan logging.
