* configure.ac: Do not add -Werror to mycflags.
--
On Windows and possible also on other platforms we expect to a get a
few errors or warnins. Thus we can't use -Werror by default. This is
why we have a separate configure options --enable-werror ;-).
Fixes-commit: 3ecd1a41be7c880976987d13e88342c98f37e064
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (handle_connections): Always check inotify fds.
--
I noticed a gpg-agent processed, probably in shutdown_pending state,
which was selecting on only these two inotify fds. The select
returned immediately but because we did not handle the fds in
shutdown_pending state they were not read and the next select call
returned one of them immediately again. Actually that should not
hanppen because the
if (active_connections == 0)
break; /* ready */
should have terminated the loop. For unknown reasons (maybe be just a
connection thread terminated in a gdb session) that did not happen.
By moving the check outside of the shutdown_pending condition and
closing the fd after they have been triggered the code should be more
robust.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 5d83eb9226c0ce608ec284d8c9bc22ce84a00c25)
* agent/protect.c (calibrate_get_time): Use clock or clock_gettime.
--
For calibration, clock(3) is better than times(3) among UNIXen.
Tested on NetBSD 7.1 and FreeBSD 11.1, using QEMU.
Thanks to Damien Goutte-Gattat for the information of use of
CLOCKS_PER_SEC; The old code with times(3) is not 100% correct,
in terms of POSIX. It should have used sysconf (_SC_CLK_TCK) instead
of CLOCKS_PER_SEC. CLOCKS_PER_SEC is specifically for clock(3).
GnuPG-bug-id: 3056, 3276, 3472
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 380bce13d94ff03c96e39ac1d834f382c5c730a1)
* configure.ac (YAT2M): Only define when found.
* doc/Makefile.am: Portability fix.
--
This is not intended to apply to master, but 2.2 branch only. When
new libgpg-error is required, installation of yat2m can be assumed.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* dirmngr/crlcache.c: Clearly document that this fucntions takes
ownership of MD.
(abort_sig_check): Allow NULL for MD.
(crl_parse_insert): Immediately set MD to NULL. Remove check for md
before a calling abort_sig_check.
--
GnuPG-bug-id: 3510
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp.c (wait_for_sock): Round SECSLEFT.
* dirmngr/dirmngr.c (main): Take care of --debug-wait also in dameon
mode.
* common/sysutils.c (gnupg_usleep) [HAVE_NANOSLEEP]: Fix nanosleep use.
--
Without the rounding we saw in verbose mose
[...]to come up ... (5s)
[...]to come up ... (4s)
immediately without the expected one second delay. Waiting for the
next seconds did not work if nanosleep was used due to improper passed
parameters in gnupg_usleep.
Adding --debug-wait for dirmngr in daemon mode is required to test
this change.
GnuPG-bug-id: 3490
Fixes-commit: 149041b0b917f4298239fe18b5ebd5ead71584a6
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp.c (wait_for_sock): Replace NAME by WHICH and adjust
caller. Revert to use the former strings.
--
Note that the second of these strings
"waiting for the agent to come up ... (%ds)\n"
"connection to agent established\n"
does not use a proper article. This should be fixed but would
introduce a string change so that it is better done in a separate
commit.
Fixes-commit: 0471ff9d3bf8d6b9a359f3c426d70d0935066907
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (GNUPG_REGISTRY_DIR): Remove leading backslash.
--
Windows does not like the leading backslash and won't read
the key.
Problem reported in the Gpg4win Message boards.
This bug was introduced by rev. 75ba215e
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* g10/card-util.c (current_card_status): String changes.
(change_sex): Description change.
(cmds): Add "salutation"; keep "sex" as an alias.
--
Note that we can't change the used values or tags but at least the UI
should show reflect the real purpose of the field.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgtar-extract.c: Prefer opt.filename over filename
for the directory prefix.
--
If you would extract from stdin (filename -) and use set-filename
to provide a real filename the "-" would be used for the directory
name. With this change an explicit filename is prefered.
GnuPG-Bug-Id: T3500
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
--
08c82b1 introduced one optional argument for this status message. Due to
an apparent editing error, the sentence fragment "arguments are
currently defined." was left in the documentation.
Signed-off-by: Will Thompson <wjt@endlessm.com>
--
This answers two questions that I was only able to answer by examining
each site where PROGRESS messages are emitted, and fixes a typo.
Signed-off-by: Will Thompson <wjt@endlessm.com>
* dirmngr/domaininfo.c (insert_or_update): Copy the name.
* dirmngr/misc.c (copy_stream): Allow arg OUT to be NULL.
* dirmngr/server.c (set_error): Protect CTX.
(dirmngr_status): Protect against missing ASSUAN_CTX.
(dirmngr_status_help): Ditto.
(dirmngr_status_printf): Ditto.
(cmd_wkd_get): Factor code out to ...
(proc_wkd_get): new func. Support silent operation with no CTX.
(task_check_wkd_support): New.
--
This finalizes the feature to efficiently cache WKD checks. If a
standard WKD query returns no data, we queue a test to be run after
the end of the session (so that we do not delay the calling client).
This check tests whether the server responsible for the queried
address has WKD at all enabled. The test is done by checking whether
the "policy" file exists. We do not check the "submission-address"
file because that is not necessary for the web key operation. The
policy file is now required.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/workqueue.c: New.
* dirmngr/Makefile.am (dirmngr_SOURCES): Add new file.
* dirmngr/server.c (server_local_s): New field session_id.
(cmd_wkd_get): Add a task.
(task_check_wkd_support): New stub function.
(cmd_getinfo): New sub-commands "session_id" and "workqueue".
(start_command_handler): Add arg session_id and store it in
SERVER_LOCAL.
(dirmngr_status_helpf): New.
* dirmngr/dirmngr.h (wqtask_t): New type.
* dirmngr/dirmngr.c (main): Pass 0 as session_id to
start_command_handler.
(start_connection_thread): Introduce a session_id and pass it to
start_command_handler. Run post session tasks.
(housekeeping_thread): Run global workqueue tasks.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/keydb.c (maybe_create_keybox): Open new keybox in bin mode.
--
As the header contains a timestamp we will have the conversion
problems if the keybox is not opened in binary mode.
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* dirmngr/domaininfo.c (MAX_DOMAINBUCKET_LEN): New.
(insert_or_update): Limit the length of a bucket chain.
(domaininfo_print_stats): Print just one summary line.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/domaininfo.c: New file.
* dirmngr/Makefile.am (dirmngr_SOURCES): Add file.
* dirmngr/server.c (cmd_wkd_get): Check whether the domain is already
known and tell domaininfo about the results.
--
This adds a registry for domain information to eventually avoid
useless queries for domains which do not support WKD. The missing
part is a background task to check whether a queried domain supports
WKD at all and to expire old entries.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (handle_connections): Always check inotify fds.
--
I noticed a gpg-agent processed, probably in shutdown_pending state,
which was selecting on only these two inotify fds. The select
returned immediately but because we did not handle the fds in
shutdown_pending state they were not read and the next select call
returned one of them immediately again. Actually that should not
hanppen because the
if (active_connections == 0)
break; /* ready */
should have terminated the loop. For unknown reasons (maybe be just a
connection thread terminated in a gdb session) that did not happen.
By moving the check outside of the shutdown_pending condition and
closing the fd after they have been triggered the code should be more
robust.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/Makefile.am [DISABLE_REGEX] (EXTRA_DIST, XTESTS):
Conditionalize.
* tests/openpgp/all-tests.scm (all-tests): Input file is Makefile.
--
The feature is only valid with !DISABLE_REGEX.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/Makefile.am (XTESTS): Add trust-pgp-4.scm.
(EXTRA_DIST): Remove the test file from EXTRA_DIST.
--
Now that issue 2923 is fixed, the trust-pgp-4 test passes as
expected and we can enable it again. That should help prevent
a future regression on this issue.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
--
In https://bugs.debian.org/881393 , Jonas Smedegaard reports:
> In option number 1, the word "komprimeret" means "compressed".
>
> I am pretty sure it should say "kompromitteret" instead, which means
> "compromised".
Debian-Bug-Id: 881393
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
--
In https://bugs.debian.org/881393 , Jonas Smedegaard reports:
> In option number 1, the word "komprimeret" means "compressed".
>
> I am pretty sure it should say "kompromitteret" instead, which means
> "compromised".
Debian-Bug-Id: 881393
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/trustdb.c (sanitize_regexp): Only escape operators.
--
To sanitize a regular expression, quoting by backslash should be only
done for defined characters. POSIX defines 12 characters including
dot and backslash.
Quoting other characters is wrong, in two ways; It may build an
operator like: \b, \s, \w when using GNU library. Case ignored match
doesn't work, because quoting lower letter means literally and no
much to upper letter.
GnuPG-bug-id: 2923
Co-authored-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/asshelp.c (wait_for_sock): instead of checking the socket
every second, we check 10 times in the first second (with exponential
decay).
--
This cuts the wall clock time for the standard test suite roughly by
half.
GnuPG-bug-id: 3490
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/asshelp.c (wait_for_sock): New function, collecting
codepaths from...
(start_new_gpg_agent) here and...
(start_new_dirmngr) here.
--
This has no functional change, but makes it easier to make this
function more efficient.
GnuPG-bug-id: 3490
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/protect.c (calibrate_get_time): Use clock or clock_gettime.
--
For calibration, clock(3) is better than times(3) among UNIXen.
Tested on NetBSD 7.1 and FreeBSD 11.1, using QEMU.
Thanks to Damien Goutte-Gattat for the information of use of
CLOCKS_PER_SEC; The old code with times(3) is not 100% correct,
in terms of POSIX. It should have used sysconf (_SC_CLK_TCK) instead
of CLOCKS_PER_SEC. CLOCKS_PER_SEC is specifically for clock(3).
GnuPG-bug-id: 3056, 3276, 3472
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/defs.scm (create-gpghome): Add s2k-count.
--
My tests show only 2.5% improvement, but as we have that option now
let's use it.
real 9m12.604s
user 2m20.720s
sys 0m11.452s
real 8m3.815s
user 2m16.700s
sys 0m11.544s
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_getinfo): New sub-commands.
* agent/protect.c (get_standard_s2k_count): Factor some code out to ...
(get_calibrated_s2k_count): new.
(get_standard_s2k_time): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 52d41c8b0f4af6278d18d8935399ddad16a26856)
* agent/agent.h (opt): New field 's2k_count'.
* agent/gpg-agent.c (oS2KCount): New enum value.
(opts): New option --s2k-count.
(parse_rereadable_options): Set opt.s2k_count.
--
This option is useful to speed up the starting of gpg-agent and in
cases where the auto-calibration runs into problems due to a broken
time measurement facility.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit f7212f1d11aad5d910d2c77b2e5c6ab31a0e786e)
* agent/command.c (cmd_getinfo): New sub-commands.
* agent/protect.c (get_standard_s2k_count): Factor some code out to ...
(get_calibrated_s2k_count): new.
(get_standard_s2k_time): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): New field 's2k_count'.
* agent/gpg-agent.c (oS2KCount): New enum value.
(opts): New option --s2k-count.
(parse_rereadable_options): Set opt.s2k_count.
--
This option is useful to speed up the starting of gpg-agent and in
cases where the auto-calibration runs into problems due to a broken
time measurement facility.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (factory_reset): Simplify.
--
In this summer, I got report about old code before this change didn't
work with newer Yubikey. I got another report test version of OpenPGP
card V3.3 implementation didn't work, either. Then, I confirmed that
according to the OpenPGP card specification, the procedure of old code
is not expected by its author.
This change simplify "factory-reset" as simple.
Only versions of Gnuk 1.2.2, 1.2.3, 1.2.4, won't work with this
change. That's because the factory-reset feature of Gnuk was
introduced by reading the implementation of GnuPG, instead of reading
the specification. Gnuk 1.2.5 and later works well. All OpenPGPcard
implementations I have work well (2.0, 2.1, 2.2, test version of 3).
GnuPG-bug-id: 3286
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit d63b7966cdd72548c60466c620de5cd6104a779e)
