* g10/gpg.c (main): Set LOG_NO_REGISTRY.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
(show_other_registry_entries): Print "DefaultLogFile".
--
The intention of this mostly forgotten registry entry was to allow for
easy debugging of the tools. However, with the global config
files (and in 2.3 with common.conf) things are anyway better. We
disable the use for the commonly used tools so that it does not look
like calling gpg on the command line seems to block with no output if
the log server (e.g. tcp://1.2.3.4:11111) is not reachable.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* common/argparse.c, common/argparse.h: Rewrite.
* tests/gpgscm/main.c: Switch to the new option parser.
* g10/gpg.c: Switch to the new option parser and enable a global conf
file.
* g10/gpgv.c: Ditto.
* agent/gpg-agent.c: Ditto.
* agent/preset-passphrase.c: Ditto.
* agent/protect-tool.c: Ditto.
* scd/scdaemon.c: Ditto.
* dirmngr/dirmngr.c: Ditto.
* dirmngr/dirmngr_ldap.c: Ditto
* dirmngr/dirmngr-client.c: Ditto.
* kbx/kbxutil.c: Ditto.
* tools/gpg-card.c: Ditto.
* tools/gpg-check-pattern.c: Ditto.
* tools/gpg-connect-agent.c: Ditto.
* tools/gpg-pair-tool.c: Ditto.
* tools/gpg-wks-client.c: Ditto.
* tools/gpg-wks-server.c: Ditto.
* tools/gpgconf.c: Ditto.
* tools/gpgsplit.c: Ditto.
* tools/gpgtar.c: Ditto.
* g13/g13.c: Ditto.
* g13/g13-syshelp.c: Ditto. Do not force verbose mode.
* sm/gpgsm.c: Ditto. Add option --no-options.
--
This is backport from master
commit cdbe10b762f38449b86da69076209324b0c99982
commit ba463128ce65a0f347643f7246a8e097c5be19f1
commit 3bc004decd289810bc1b6ad6fb8f47e45c770ce6
commit 2c823bd878fcdbcc4f6c34993e1d0539d9a6b237
commit 0e8f6e2aa98c212442001036fb5178cd6cd8af59
but without changing all functions names to gpgrt. Instead we use
wrapper functions which, when building against old Libgpg-error
versions, are implemented in argparse.c using code from the current
libgpg-error. This allows to keep the dependency requirement at
libgpg-error 1.27 to support older distributions. Tested builds
against 1.27 and 1.40-beta.
Note that g13-syshelp does not anymore default to --verbose because
that can now be enabled in /etc/gnupg/g13-syshelp.conf.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (gnupg_fopen) [W32]: Use _wfopen if needed. Use
new function in most places where fopen is used.
--
The config files in 2.2 are still read using fopen - we need to change
this to allow Unicode directory names. There is also one case where
files are written using the old fopen. The new option parser in 2.3
does not have this problem but at some places fopen is also still used.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported-from-master: 390497ea115e1aca93feec297a5bd6ae7b1ba6dd
* dirmngr/server.c (cmd_killdirmngr): Return 0.
* tools/gpg-connect-agent.c (main): Catch signals.
--
And we also print nicer diagnostics. The reason we need this is that
for example "gpgconf --kill dirmngr" uses gpg-connect-agent to send a
command to dirmngr. This may results in a SIGPIPE which in turn leads
to an annoying error message from gpgconf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-connect-agent.c (do_open): dup the fileno and close the
stream.
GnuPG-bug-id: 4220
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 378719f25fe00d46393541f4a4f79e04484c3000)
* tools/gpg-connect-agent.c (start_agent): Add paren.
--
The intention is comparing the error code depending opt.use_dirmngr.
Considering C Operator Precedence, we should have paren here.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpg-connect-agent.c (main): Use a gpgrt_stream_t for
'script_fp'. Adapt accordingly.
--
Werner asked me to make gpgconf use the platform abstractions that
were introduced after gpgconf's inception. After doing that, I
realized that 'read_line' is only used in two more places, one of
which this patch takes care of.
Signed-off-by: Justus Winter <justus@g10code.com>
* agent/preset-passphrase.c, agent/protect-tool.c, dirmngr/dirmngr.c
* dirmngr/t-http.c, g10/gpg.c, g10/gpgv.c, g13/g13-syshelp.c
* g13/g13.c, kbx/kbxutil.c, scd/scdaemon.c, sm/gpgsm.c
* tests/gpgscm/main.c, tools/gpg-check-pattern.c
* tools/gpg-connect-agent.c, tools/gpgconf.c, tools/gpgtar.c
* tools/symcryptrun.c: Invoke log_set_prefix() with
human-readable labels.
--
Some invocations of log_set_prefix() were done with raw numeric values
instead of values that humans can understand. Use symbolic
representations instead of numeric for better readability.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/homedir.c: Include sys/stat.h and zb32.h.
(w32_portable_app, w32_bin_is_bin): Change type from int to byte.
(non_default_homedir): New.
(is_gnupg_default_homedir): New.
(default_homedir): Set non_default_homedir.
(gnupg_set_homedir): Set non_default_homedir and make
the_gnupg_homedir and absolute directory name.
(gnupg_homedir): Return an absolute directory name.
(_gnupg_socketdir_internal): New.
(gnupg_socketdir): Implement /run/user/ based sockets.
* tools/gpg-connect-agent.c (get_var_ext): Replace now obsolete
make_filename by xstrdup.
* tools/gpgconf.c (main): Sue gnupg_homedir for the "homedir:" output.
--
If a [/var]/run/user/$(id -u)/ directory exists, a gnupg subdir is
created as needed and the permissions of the directories are checked.
If that all matches that directory name is returned instead of the
homedir.
To cope with non standard homedirs (via GNUPGHOME or --homedir) the
SHA-1 hash of the homedir is computed, left truncated to 120 bits,
zBase-32 encoded, prefixed with "d.", and appended to
"[/var]/run/user/$(id -u)/gnupg/". If that directory exists and has
proper permissions it is returned as socket dir - if not the homedir
is used. Due to cleanup issues, this directory will not be
auto-created but needs to be created by the user in advance.
The required permissions are: directory owned by the user, group and
others bits not set.
Signed-off-by: Werner Koch <wk@gnupg.org>
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
GnuPG requires that options are given before other arguments. This
can sometimes be confusing. We now print a warning if we found an
argument looking alike a long option without being preceded by the
stop option. This is bug#1343.
* common/argparse.h (ARGPARSE_FLAG_STOP_SEEN): New.
* common/argparse.c (arg_parse): Set new flag.
* g10/gpg.c (main): Print the warning.
* agent/gpg-agent.c (main): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
* g13/g13.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
For the shared code parts it is cumbersome to pass an error sourse
variable to each function. Its value is always a constant for a given
binary and thus a global variable makes things a lot easier than the
former macro stuff.
* common/init.c (default_errsource): New global var.
(init_common_subsystems): Rename to _init_common_subsystems. Set
DEFAULT_ERRSOURCE.
* common/init.h: Assert value of GPG_ERR_SOURCE_DEFAULT.
(init_common_subsystems): New macro.
* common/util.h (default_errsource): Add declaration.
* kbx/keybox-defs.h: Add some GPG_ERR_SOURCE_DEFAULT trickery.
* agent/call-scd.c (pass_status_thru): Pass comment lines verbatim.
* tools/gpg-connect-agent.c (help_cmd_p): New.
(main): Treat an "SCD HELP" the same as "HELP".
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* call-pinentry.c (start_pinentry): Call assuan_pipe_connect, not
assuan_pipe_connect_ext.
* command.c (start_command_handler): Change
assuan_init_socket_server_ext into assuan_init_socket_server.
* call-scd.c (start_scd): Update use of assuan_socket_connect and
assuan_pipe_connect.
* gpg-agent.c (check_own_socket_thread, check_for_running_agent):
Update use of assuan_socket_connect.
common/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Update use of
assuan_socket_connect and assuan_pipe_connect.
scd/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* command.c (scd_command_handler): Call assuan_init_socket_server,
not assuan_init_socket_server_ext.
sm/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* call-dirmngr.c (start_dirmngr_ext): Update use of
assuan_pipe_connect and assuan_socket_connect.
tools/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (start_agent): Update use of
assuan_socket_connect and assuan_pipe_connect.
* configure.ac (NEED_LIBASSUAN_API, NEED_LIBASSUAN_VERSION):
Update to new API (2, 1.1.0).
agent/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-agent.c (parse_rereadable_options): Don't set global assuan
log file (there ain't one anymore).
(main): Update to new API.
(check_own_socket_pid_cb): Return gpg_error_t instead of int.
(check_own_socket_thread, check_for_running_agent): Create assuan
context before connecting to server.
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(write_and_clear_outbuf): Use gpg_error_t instead of
assuan_error_t.
(cmd_geteventcounter, cmd_istrusted, cmd_listtrusted)
(cmd_marktrusted, cmd_havekey, cmd_sigkey, cmd_setkeydesc)
(cmd_sethash, cmd_pksign, cmd_pkdecrypt, cmd_genkey, cmd_readkey)
(cmd_keyinfo, cmd_get_passphrase, cmd_clear_passphrase)
(cmd_get_confirmation, cmd_learn, cmd_passwd)
(cmd_preset_passphrase, cmd_scd, cmd_getval, cmd_putval)
(cmd_updatestartuptty, cmd_killagent, cmd_reloadagent)
(cmd_getinfo, option_handler): Return gpg_error_t instead of int.
(post_cmd_notify): Change type of ERR to gpg_error_t from int.
(io_monitor): Add hook argument. Use symbols for constants.
(register_commands): Change return type of HANDLER to gpg_error_t.
(start_command_handler): Allocate assuan context before starting
server.
* call-pinentry.c: Include "scdaemon.h" before <assuan.h> because
of GPG_ERR_SOURCE_DEFAULT check.
(unlock_pinentry): Call assuan_release instead of
assuan_disconnect.
(getinfo_pid_cb, getpin_cb): Return gpg_error_t instead of int.
(start_pinentry): Allocate assuan context before connecting to
server.
* call-scd.c (membuf_data_cb, learn_status_cb, get_serialno_cb)
(membuf_data_cb, inq_needpin, card_getattr_cb, pass_status_thru)
(pass_data_thru): Change return type to gpg_error_t.
(start_scd): Allocate assuan context before connecting to server.
common/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Allocate assuan context before
starting server.
g10/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* call-agent.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(learn_status_cb, dummy_data_cb, get_serialno_cb, default_inq_cb)
(learn_status_cb, inq_writecert_parms, inq_writekey_parms)
(scd_genkey_cb, membuf_data_cb): Return gpg_error_t instead of
int.
* gpg.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(main): Update to new Assuan API.
* server.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, do_listkeys, cmd_listkeys)
(cmd_listsecretkeys, cmd_genkey, cmd_getinfo): Return gpg_error_t
instead of int.
(register_commands): Allocate assuan context before starting
server.
(gpg_server): Allocate assuan_context before starting server.
scd/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, open_card, cmd_serialno, cmd_lean, cmd_readcert)
(cmd_readkey, cmd_setdata, cmd_pksign, cmd_pkauth, cmd_pkdecrypt)
(cmd_getattr, cmd_setattr, cmd_writecert, cmd_writekey)
(cmd_genkey, cmd_random, cmd_passwd, cmd_checkpin, cmd_lock)
(cmd_unlock, cmd_getinfo, cmd_restart, cmd_disconnect, cmd_apdu)
(cmd_killscd): Return gpg_error_t instead of int.
(scd_command_handler): Allocate assuan context before starting server.
* scdaemon.c (main): Update to new Assuan API.
sm/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpgsm.c (main): Update to new assuan API.
* server.c: Include "gpgsm.h" before <assuan.h> due to check for
GPG_ERR_SOURCE_DEFAULT and assuan.h now including gpg-error.h.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, cmd_listkeys, cmd_dumpkeys)
(cmd_listsecretkeys, cmd_dumpsecretkeys, cmd_genkey)
(cmd_getauditlog, cmd_getinfo): Return gpg_error_t instead of int.
(register_commands): Same for member HANDLER in table.
(gpgsm_server): Allocate assuan context before starting server.
* sm/call-dirmngr.c:
* call-dirmngr.c (prepare_dirmngr): Check for CTX and error before
setting LDAPSERVER.
(start_dirmngr_ext): Allocate assuan context before starting
server.
(inq_certificate, isvalid_status_cb, lookup_cb, lookup_status_cb)
(run_command_cb, run_command_inq_cb, run_command_status_cb):
Return gpg_error_t instead of int.
tools/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (getinfo_pid_cb, read_and_print_response)
(main): Update to new Assuan API.
