* g10/options.h (LIST_SHOW_UNUSABLE_SIGS): New.
* g10/gpg.c (parse_list_options): Add "show-unusable-sigs".
* g10/keydb.h (keyid_eq): New.
(pk_is_primary): New.
* g10/keylist.c (list_signature_print): Early return for weak key
signatures. Print "self-signature" instead of user-id.
(list_keyblock_print): Simplify and always set self-sig node flag.
--
This patch avoid the printing of often hundreds of "Invalid digest
algorithm" notices during key signature listings if those key
signatures were done with SHA1. The new option can be used to revert
the behaviour.
We now also print "[self-signature]" with --check-sigs or --list-sigs
instead of the primary user id. This makes such listing easier to read.
* common/compliance.c (gnupg_pk_is_allowed): Handle EdDSA.
* g10/gpg.c (oOverrideComplianceCheck): Remove.
(opts): Turn --override-compliance-check into a dummy option.
* g10/options.h (opt): Remove override_compliance_check.
* g10/sig-check.c (check_key_verify_compliance): Remove use of that
option.
--
The introduction of --override-compliance-check actually hid the real
cause for the signature verification problem in de-vs mode for the
Ed25519 key. The real fix is to handle the EdDSA algorithm in
gnupg_pk_is_allowed.
Fixes-commit: fb26e144ad
GnuPG-bug-id: 5655
* common/iobuf.c (file_filter_ctx_t): Add fields for the peek feature.
(file_filter): Implement peeking.
(iobuf_ioctl): Add new IOBUF_IOCTL_PEEK.
* common/iobuf.h (IOBUF_IOCTL_PEEK, IOBUFCTRL_PEEK): New.
* common/miscellaneous.c (is_file_compressed): Rewrite. Detect PDF.
* g10/encrypt.c (encrypt_simple): Peek before detecting compression.
(encrypt_crypt): Ditto.
* g10/sign.c (sign_file): Also detect already compressed data.
* g10/options.h (opt): Add explicit_compress_option.
* g10/gpg.c (main): Set opt.explicit_compress_option for -z.
--
Note that this patch also introduces a compression check for signing
which was never done in the past.
GnuPG-bug-id: 6332
* sm/call-dirmngr.c (gpgsm_dirmngr_isvalid): Do not use
option --force-default-responder.
* sm/certchain.c (is_cert_still_valid): Rename arg for clarity.
(gpgsm_validate_chain): Always switch to chain model.
--
The trustlist.txt may indicate that a root CA issues certificates
which shall be validated using the chain model. This is for example
the case for qualified signatures. Before this change we did this
only if the default shell model indicated that a certificate has
expired. This optimization is technically okay but has one problem:
The chain model requires the use of OCSP but we switch to this only
when running the chain model validation. To catch revoked
certificates using OCSP we need to always switch to the chain model
unless OCSP has been enabled anyway.
Note that the old --force-default-responder option is not anymore
used.
Test cases are certificates issued by
# CN=TeleSec qualified Root CA 1
# O=Deutsche Telekom AG
# C=DE
# 2.5.4.97=USt-IdNr. DE 123475223
90:C6:13:6C:7D:EF:EF:E9:7C:C7:64:F9:D2:67:8E:AD:03:E5:52:96 \
S cm qual relax
A sample revoked certificate is
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
* agent/command.c (cmd_export_key): Add option --mode1003.
(command_has_option): Ditto.
* g10/build-packet.c (do_key): Implement mode 1003.
* g10/parse-packet.c (parse_key): Ditto.
* g10/options.h (EXPORT_MODE1003): New.o
* g10/call-agent.c (agent_export_key): Add arg mode1003.
* g10/export.c (parse_export_options): Add "mode1003"
(secret_key_to_mode1003): New.
(receive_seckey_from_agent): Add arg mode1003.
(do_export_one_keyblock): Pass option down.
--
This option allows to export a secret key in GnuPG's native format.
Thus no re-encryption is required and further the public key parameters
are also authenticated if a protection passphrase has been used.
Note that --import is not yet able to handle this new mode. Although
old version of GnuPG will bail out with "invalid packet" if a mode1003
exported secret key is seen.
* g10/gpg.c (oListFilter): New.
(opts): Add --list-filter.
(main): Parse oListFilter.
* g10/keylist.c: Include init.h and recsel.h.
(struct list_filter_s, list_filter): New.
(release_list_filter): New.
(cleanup_keylist_globals): New.
(parse_and_set_list_filter): New.
(list_keyblock): Implement --list-filter type "select".
* g10/import.c (impex_filter_getval): Add scope support and new
property names "key-size", "algostr", "origin", "lastupd", and "url".
--
This option is pretty useful to select keys based on their properties.
The scope thing can be sued to limit a selection to just the primary
key or to subkeys. For example:
gpg -k --list-filter 'select=revoked-f && sub/algostr=ed25519'
Lists all non-revoked keys with an ed25519 (signing)-subkey.
* g10/gpg.c (aQuickUpdatePref): New.
(opts): Add --quick-update-pref.
(main): Implement.
* g10/keyedit.c (keyedit_quick_update_pref): New.
(menu_set_preferences): Add arg 'unattended' and adjust caller.
--
This new quick command is in particular useful to update existing keys
so that they can be used with OCB mode.
* g10/gpg.c (opts): New option--force-ocb as alias for force-aead.
Turn --aead-algo and --personal-aead-preferences into dummy options.
(build_list_md_test_algo, build_list_aead_algo_name): Remove.
(my_strusage): Remove output of AEAD algos.
(main): Remove code from the --aead options.
* g10/encrypt.c (encrypt_seskey): Make file local.
(use_aead): Remove requirement for rfc4880bis. Always return
AEAD_ALGO_OCB.
* g10/main.h (DEFAULT_AEAD_ALGO): Removed unused macro.
* g10/misc.c (default_aead_algo): Remove.
* g10/pkclist.c (select_aead_from_pklist): Return AEAD_ALGO_OCB or 0.
(select_algo_from_prefs): Remove personal AEAD algo setting.
* g10/keygen.c (keygen_set_std_prefs): Remove AEAD preference option
parsing.
* g10/options.h (opt): Remove def_aead_algo and personal_aead_prefs.
--
Due to the meanwhile expired patent on OCB there is no more reason for
using EAX. Thus we forcefully use OCB if the AEAD feature flag is set
on a key.
* g10/gpg.c (oCompatibilityFlags): New.
(opts): Add option.
(compatibility_flags): New list.
(main): Set flags and print help.
* g10/options.h (opt): Add field compatibility_flags.
--
No flags are yet defined but it is good to have the framework.
* g10/options.h (opt): Add field flags.require_compliance.
* g10/gpg.c (oRequireCompliance): New.
(opts): Add --require-compliance.
(main): Set option.
* g10/mainproc.c (proc_encrypted): Emit error if non de-vs compliant.
(check_sig_and_print): Ditto.
* g10/encrypt.c (encrypt_crypt): Ditto.
--
Note that in the --encrypt and --verify cased other checks may kick in
earlier than this new --require-compliance controlled one.
* g10/filter.h (armor_filter_context_t): New fields dearmor_mode and
dearmor_state.
* g10/dearmor.c (dearmor_file): Set dearmor_mode.
* g10/armor.c (is_armor_header): Magic to switch to generic dearmor
mode.
(parse_header_line): Treat non OpenPGP armor in a special way.
(check_input): Ditto.
(radix64_read): Detect non OpenPGP armor END lines.
* g10/gpg.c (oForbidGenKey, opts): New option.
(mopt): New local struct
(gen_key_forbidden): New.
(main): Set and handle the option.
--
In large system installation it is sometimes useful to make it a bit
harder for users to generate their own keys. An example is a policy
to not use on-disk keys.
* g10/gpg.c (oOverrideComplianceCheck): New.
(opts): Add new option.
(main): Set option and add check for batch mode.
* g10/options.h (opt): Add flags.override_compliance_check.
* g10/sig-check.c (check_signature2): Factor complaince checking out
to ...
(check_key_verify_compliance): this. Turn error into a warning in
override mode.
--
There is one important use case for this: For systems configured
globally to use de-vs mode, Ed25519 and other key types are not
allowed because they are not listred in the BSI algorithm catalog.
Now, our release signing keys happen to be Ed25519 and thus we need to
offer a way for users to check new versions even if the system is in
de-vs mode. This does on purpose not work in --batch mode so that
scripted solutions won't accidently pass a signature check.
GnuPG-bug-id: 5655
* common/homedir.c (MYPROC_SELF_EXE): New.
(unix_rootdir): Use it here. Also support GNUPG_BUILD_ROOT as
fallback.
--
In addition this adds a fallback method for AIX etc which do not have
an easy way to get the info.
--
This is per OpenPGP WG design team decision from 2021-08-13
(raising a new wall after exactly 60 years ;-)
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/recsel.c (recsel_parse_expr): Add flag -t.
* common/stringhelp.c: Remove assert.h.
(strtokenize): Factor code out to do_strtokenize.
(strtokenize_nt): New.
(do_strtokenize): Add arg trim to support the strtokenize_nt.
* common/t-stringhelp.c (test_strtokenize_nt): New test cases.
* tools/wks-util.c (wks_list_key): Use strtokenize_nt and the recsel
flag -t.
--
This fixes a bug with user ids with leading spaces because:
wks-client lists all mail addresses from the key and matches them to the
requested mail address.
If there are several user-ids all with the same mail address
wks-client picks one of them and then extracts exactly that user id.
However, here it does not match by the mail address but by the full
user-id so that we can be sure that there will be only one user-id in
the final key.
The filter built expression unfortunately strips leading blanks but
requires a verbatim match. Thus it won't find the user id again and
errors out.
The new -t flag and a non-trimming strtokenize solves the problem.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/keyserver.h: Remove.
* sm/gpgsm.h (struct keyserver_spec): Remove.
(opt): Change keyserver to a strlist_t.
* sm/gpgsm.c (keyserver_list_free): Remove.
(parse_keyserver_line): Remove.
(main): Store keyserver in an strlist.
* sm/call-dirmngr.c (prepare_dirmngr): Adjust for the strlist. Avoid
an ambiguity in dirmngr by adding a prefix if needed.
* g10/options.h (struct keyserver_spec): Move definition from
keyserver.h to here. Remove most fields.
* g10/keyserver.c (free_keyserver_spec): Adjust.
(cmp_keyserver_spec): Adjust.
(parse_keyserver_uri): Simplify.
(keyidlist): Remove fakev3 arg which does not make any sense because
we don't even support v3 keys.
--
We now rely on the dirmngr to parse the keyserver specs. Thus a bad
specification will not be caught immediately. However, even before
that dirmngr had stricter tests.
Signed-off-by: Werner Koch <wk@gnupg.org>
Ported-from: 9f586700ec
* g10/keyserver.c (keyserver_import_fprint_ntds): New.
* g10/getkey.c (get_pubkey_byname): Detect an attempt to search by
fingerprint in no_local mode.
--
See the man page. For testing use
gpg --auto-key-locate local,wkd,keyserver --locate-external-key \
FINGERPRINT
with at least one LDAP keyserver given in dirmngr.conf. On Windows
"ntds" may be used instead or in addtion to "keyserver".
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/comopt.c, common/comopt.h: New.
* common/Makefile.am: Add them.
* g10/gpg.c: Include comopt.h.
(main): Also parse common.conf.
* sm/gpgsm.c: Include comopt.h.
(main): Set a flag for the --no-logfile option. Parse common.conf.
* tools/gpgconf-comp.c (known_options_gpg): Remove "use-keyboxd", add
pseudo option "use_keyboxd".
(known_pseudo_options_gpg): Add pseudo option "use_keyboxd".
(known_options_gpgsm): Remove "use-keyboxd".
* tests/openpgp/defs.scm (create-gpghome): Create common.conf.
* doc/examples/common.conf: New.
--
Note that --use-keybox still works but prints a warning. We will
eventually remove this option becuase it was marked as an experimental
feature anyway.
It would be too confusing if gpg and gpgsm use different key storages.
Further, other components (e.g. dirmngr or gpg-wks-client) which call
gpg or gpgsm need to be aware that the keyboxd is used and pass that
option on the command line. Now that common.conf is always read (even
if --no-options is used) those tools will work instantly.
* dirmngr/ks-engine-ldap.c (ks_ldap_get): Print a SOURCE status.
* g10/options.h (opts): New field expl_import_self_sigs_only.
* g10/import.c (parse_import_options): Set it.
* g10/keyserver.c (keyserver_get_chunk): Add special options for LDAP.
--
I can be assumed that configured LDAP servers are somehow curated and
not affected by rogue key signatures as the HKP servers are. Thus we
can allow the import of key signature from LDAP keyservers by default.
GnuPG-bug-id: 5387
--
The tpm2d patches introduced a new --edit-key command: keytotpm. Add
a descriptive entry explaining what it does and how it works.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* g10/gpg.c (oForceSignKey,opts): New option "--force-sign-key".
(main): Set it.
* g10/options.h (opt): New flag flags.force_sign_key.
* g10/keyedit.c (sign_uids): Use new flag.
--
GnuPG-bug-id: 4584
* common/init.c (_init_common_subsystems) [W32]: Set the codepage to
UTF-8 for input and putput. Switch gettext to UTF-8.
* tools/gpgconf.c (main): Display the input and output codepage if
they differ.
* g10/gpg.c (utf8_strings) [W32]: Make sure this is always set.
--
With this patch the former patch to use ReadConsoleW and WriteConsoleW
in ttyio.c are kind of superfluous because the ANSI version of these
functions are also able to read/write UTF-8 directly given the console
code page has been set correctly. However, this seems to work only
with recent versions of Windows-10.
GnuPG-bug-id: 4365
* dirmngr/ldap-parse-uri.c (ldap_parse_uri): Support a new gpgNtds
extension.
* dirmngr/ks-engine-ldap.c (my_ldap_connect): Do ldap_init always with
hostname - which is NULL and thus the same if not given. Fix minor
error in error code handling.
--
Note that "gpgNtds" is per RFC-4512 case insensitive and has not yet
been officially regisetered. Thus for correctness the OID can be
used:
1.3.6.1.4.1.11591.2.5 LDAP URL extensions
1.3.6.1.4.1.11591.2.5.1 gpgNtds=1 (auth. with current user)
Note that the value must be 1; all other values won't enable AD
authentication and are resevered for future use.
This has been cherry-picked from the 2.2 branch,
commit 55f46b33df
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: New option --allow-old-cipher-algos.
(set_compliance_option): Set --rfc4880bis explictly to SHA256 and
AES256. Allow old cipher algos for OpenPGP, rfc4880, and rfc2440.
* g10/options.h (opt): Add flags.allow_old_cipher_algos.
* g10/misc.c (print_sha1_keysig_rejected_note): Always print the note
unless in --quiet mode.
* g10/encrypt.c (setup_symkey): Disallow by default algos with a
blocklengt < 128.
(encrypt_crypt): Ditto. Fallback by default to AES instead of 3DES.
* g10/pkclist.c (algo_available): Take care of old cipher also.
(select_algo_from_prefs): Use AES as implicit algorithm by default.
* tests/openpgp/defs.scm (create-gpghome): Set allow-old-cipher-algos.
--
GnuPG-bug-id: 3415
* g10/gpg.c (oPrintPKARecords): Remove.
(opts): Remove --print-pka-records.
(main): Remove "pka-lookups","pka-trust-increase" and other PKA stuff.
* g10/options.h (EXPORT_DANE_FORMAT): Remove.
(VERIFY_PKA_LOOKUPS, VERIFY_PKA_TRUST_INCREASE): Remove.
(KEYSERVER_HONOR_PKA_RECORD): Remove.
* g10/packet.h (pka_info_t): Remove.
(PKT_signature): Remove flags.pka_tried and pka_info.
* g10/parse-packet.c (register_known_notation): Remove
"pka-address@gnupg.org".
* g10/pkclist.c (check_signatures_trust): Remove PKA stuff.
* g10/call-dirmngr.c (gpg_dirmngr_get_pka): Remove.
* g10/export.c (parse_export_options): Remove "export-pka".
(do_export): Adjust for this.
(write_keyblock_to_output): Ditto.
(do_export_stream): Ditto.
(print_pka_or_dane_records): Rename to ...
(print_dane_records): this and remove two args. Remove PKA printing.
* g10/free-packet.c (free_seckey_enc, cp_pka_info): Adjust for removed
pka_info field.
* g10/getkey.c (get_pubkey_byname): Make AKL_PKA a dummy.
* g10/keyserver.c: Remove "honor-pka-record".
(keyserver_import_pka): Remove.
* g10/mainproc.c (get_pka_address): Remove.
(pka_uri_from_sig): Remove.
(check_sig_and_print): Remove code for PKA.
--
PKA (Public Key Association) was a DNS based key discovery method
which looked up fingerprint by mail addresses in the DNS. This goes
back to the conference where DKIM was suggested to show that we
already had a better method for this available with PGP/MIME. PKA was
was later superseded by an experimental DANE method and is today not
anymore relevant. It is anyway doubtful whether PKA was ever widely
used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpg.texi: Add parameters for batch generation of ECC keys.
--
There are parameters required for batch generation of ECC keys which
weren't mentioned in the documentation.
Signed-off-by: Jens Meißner <meissner@b1-systems.de>
* g10/gpg.c (parse_list_options): Add "sort-sigs".
(main): Make it the default.
* g10/options.h (LIST_SORT_SIGS): New.
* g10/keylist.c (cmp_signodes): New.
(list_keyblock_print): Sort signatures and factor signature printing
code out to ...
(list_signature_print): new.
--
In particular together with --full-timestamps this makes it easier to
see the history of key signatures and their revocations. The
self-signatures are also printed first. To disable this
--list-options no-sort-sigs
can be used.
Also don't print the annoying "no recocation reason specified"
message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_BULK): New.
* g10/import.c (parse_import_options): Add "bulk-import".
* g10/call-keyboxd.c (in_transaction): New var.
(gpg_keyboxd_deinit_session_data): Run a commit if in bulk import
mode.
(create_new_context): Run a begin transaction if in bulk import mode.
--
Initial tests with this option are not very promising. Importing
about 3000 real world keys with --use-keyboxd and full logging took:
real 33m31.724s
user 19m54.265s
sys 2m49.662s
With bulk-import this saves a mere 12%:
real 29m36.542s
user 19m3.391s
sys 2m46.728s
Signed-off-by: Werner Koch <wk@gnupg.org>
