* common/http.h (HTTP_FLAG_FORCE_TOR): New.
* common/http.c (http_raw_connect, send_request): Detect flag and
return an error for now.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/iobuf.h (enum iobuf_use): Add new member, IOBUF_INPUT_TEMP.
* common/iobuf.c (iobuf_temp_with_content): Create the iobuf as an
IOBUF_INPUT_TEMP, not an IOBUF_INPUT buffer. Assert that LENGTH ==
A->D.SIZE.
(iobuf_push_filter2): If A is an IOBUF_INPUT_TEMP, then make the new
filter an IOBUF_INPUT filter and set its buffer size to
IOBUF_BUFFER_SIZE.
(underflow): If A is an IOBUF_INPUT_TEMP, then just return EOF; don't
remove already read data.
(iobuf_seek): If A is an IOBUF_INPUT_TEMP, don't discard the buffered
data.
(iobuf_alloc): Allow USE == IOBUF_INPUT_TEMP.
(pop_filter): Allow USE == IOBUF_INPUT_TEMP.
(iobuf_peek): Allow USE == IOBUF_INPUT_TEMP.
(iobuf_writebyte): Fail if USE == IOBUF_INPUT_TEMP.
(iobuf_write): Fail if USE == IOBUF_INPUT_TEMP.
(iobuf_writestr): Fail if USE == IOBUF_INPUT_TEMP.
(iobuf_flush_temp): Fail if USE == IOBUF_INPUT_TEMP.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Introduce a new iobuf type, IOBUF_INPUT_TEMP. Use this for the iobuf
created by iobuf_temp_with_content instead of IOBUF_INPUT. This was
necessary so that seeking and peeking correctly work on this type of
iobuf. In particular, seeking didn't work because we discarded the
buffered data and peeking didn't work because we discarded data which
was already read, which made seeking later impossible.
* common/iobuf.h (enum iobuf_use): Name the IOBUF_OUTPUT, etc. enum.
(struct iobuf_struct): Change the field use's type to it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/t-iobuf.c (content_filter): If there is nothing to read,
don't forget to set *LEN to 0.
(main): Fix checks.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/status.h (STATUS_FAILURE): New.
* g10/cpr.c (write_status_failure): New.
* g10/gpg.c (main): Call write_status_failure for all commands which
print an error message here.
* g10/call-agent.c (start_agent): Print an STATUS_ERROR if we can't
set the pinentry mode.
--
This status line can be used similar to the error code returned by
commands send over the Assuan interface in gpgsm. We don't emit them
in gpgsm because there we already have that Assuan interface to return
proper error code. This change helps GPGME to return better error
codes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/iobuf.c (iobuf_read): Make control flow more obvious.
(iobuf_get_filelength): Likewise.
(iobuf_get_fd): Likewise.
(iobuf_seek): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_alloc): Check that BUFSIZE is not 0.
(iobuf_readbyte): Check that A is an input filter. Check that the
amount of read data is at most the amount of buffered data.
(iobuf_read): Check that A is an input filter.
(iobuf_writebyte): Check that A is not an input filter.
(iobuf_writestr): Check that A is not an input filter.
(iobuf_flush_temp): Check that A is not an input filter.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_push_filter2): If the head filter is a temp
filter, use IOBUF_BUFFER_SIZE for the new filter.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_push_filter2): If the pipeline is an output or
temp pipeline, the new filter shouldn't assume ownership of the old
head's internal buffer: the data was written before the filter was
added.
* common/t-iobuf.c (double_filter): New function.
(main): Add test cases for the above bug.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_temp_to_buffer): Flush each filter in the
pipeline and copy the data from the last (not the first) filter's
internal buffer.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (do_open): New function, which is a generalization of
iobuf_open, iobuf_Create, iobuf_openrw.
(iobuf_open): Call do_open.
(iobuf_create): Likewise.
(iobuf_openrw): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (iobuf_open_fd_or_name): Remove prototype. Replace
use with either iobuf_open or iobuf_fdopen_nc, as appropriate.
* common/iobuf.c (iobuf_open): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_cancel): Don't abort freeing a pipeline if
freeing a filter fails. This needs to a memory leak. Instead, keep
freeing and return the error code of the first filter that fails.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (underflow): Take additional parameter
clear_pending_eof. If not set, don't clear a pending eof when
returning EOF. Update callers.
(iobuf_peek): Fill the internal buffer, if needed, to be able to
better satisfy any request.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (underflow): Don't require that the buffer be empty.
When called, fill any available space.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_read_line): Be more careful with boundary
conditions.
* common/iobuf.h: Include <gpg-error.h>.
* common/t-iobuf.c: New file.
* common/Makefile.am (module_tests): Add t-iobuf.
(t_mbox_util_LDADD): New variable.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_temp_with_content): Set the filter type to
IOBUF_INPUT, not IOBUF_TEMP, which is only for output filters that
write into a dynamic buffer.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (struct iobuf_struct): Remove field desc.
* common/iobuf.c (iobuf_desc): New function. When a filter's
description is needed, use this instead of the filter's desc field.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (struct iobuf_struct): Clarify semantics of nofast.
Simplify use of nofast to implement just these semantics.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c: Move BLOCK_FILTER_INPUT,
BLOCK_FILTER_OUTPUT_BLOCK_FILTER_TEMP from here...
* common/iobuf.h: ... to here and rename to IOBUF_INPUT, IOBUF_OUTPUT
and IOBUF_TEMP, respectively. Where appropriate, use these macros
instead of a literal.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/status.h (INQUIRE_MAXLEN): New.
* g10/call-agent.c (default_inquire_cb): Send STATUS_INQUIRE_MAXLEN.
client when inquiring a passphrase over pinentry-loopback.
--
This is to inform a user about the maximum length of a passphrase. The
limit is the same that gpg-agent uses.
* common/iobuf.c (BLOCK_FILTER_INPUT): Define. Where appropriate, use
this instead of a literal.
(BLOCK_FILTER_OUTPUT): Likewise.
(BLOCK_FILTER_TEMP): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/openpgp-oid.c (oidtable): Change alias.
--
This is a cosmetic change so that common and expected common
algorithms line up nicely in a keylisting. For example:
pub ed25519/C68CE6D1ED0319C8 2015-08-06
uid [ultimate] Curve25519 Test 150806.1
sub cv25519/49238B9F0712C9BF 2015-08-06
sub rsa2048/8AEAF74014699D2C 2015-08-06
sub cv25519/8EC3776830B08736 2015-08-06
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/cvt-openpgp.c (get_keygrip): Handle Curve25519.
(convert_secret_key, convert_transfer_key): Ditto.
* common/openpgp-oid.c (oidtable): Add Curve25519.
(oid_crv25519, openpgp_oid_is_crv25519): New.
* common/util.h (openpgp_oid_is_crv25519): New.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Handle the case
with Montgomery curve which uses x-only coordinate.
* g10/keygen.c (gen_ecc): Handle Curve25519.
(ask_curve): Change the API and second arg is to return subkey algo.
(generate_keypair, generate_subkeypair): Follow chage of ask_curve.
* g10/keyid.c (keygrip_from_pk): Handle Curve25519.
* g10/pkglue.c (pk_encrypt): Handle Curve25519.
* g10/pubkey-enc.c (get_it): Handle the case with Montgomery curve.
* scd/app-openpgp.c (ECC_FLAG_DJB_TWEAK): New.
(send_key_attr): Work with general ECC, Ed25519, and Curve25519.
(get_public_key): Likewise.
(ecc_writekey): Handle flag_djb_tweak.
--
When libgcrypt has Curve25519, GnuPG now supports Curve25519.
* common/openpgp-oid.c (openpgp_oid_to_curve): Add CANON argument.
* common/util.h: Update.
* g10/import.c (transfer_secret_keys): Follow the change.
* g10/keyid.c (pubkey_string): Likewise.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Likewise.
* parse-packet.c (parse_key): Likewise.
* scd/app-openpgp.c (send_key_attr, get_public_key): Likewise.
--
Change the function so that caller can select canonical name of curve
or name for printing. Suggested by wk.
* common/i18n.c (USE_MSGCACHE): New.
(msgcache) [!USE_MSGCACHE]: Do not define.
(i18n_localegettext): Repalce #if conditions by USE_MSGCACHE.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Provide replacement for GPGRT_ATTR_ macros when using
libgpg-error < 1.20.
* common/mischelp.h: Ditto.
* common/types.h: Ditto.
--
Given that libgpg-error is a dependency of all GnuPG related libraries
it is better to define such macros at only one place instead of having
similar macros at a lot of places. For now we need repalcement
macros, though.
* common/i18n.c (msg_cache_s, msg_cache_head_s): New.
(msgcache): New.
(i18n_localegettext): Implement locale dependent lookup.
--
This is the second and final part of the change to use the gpg
provided locale for Pinentry strings. It does not yet work on
Windows, though.
This commit should resolve
Debian-bug-id: 788983
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/session-env.c (stdenvnames): Add DBUS_SESSION_BUS_ADDRESS.
--
pinentry-gnome3 talks to the gcr prompter via dbus. Without this
environment variable, it can't find the correct session to talk to.
* agent/agent.h (LunderscorePROTO): New.
* common/util.h (GNUPG_GCC_ATTR_FORMAT_ARG): New.
* common/i18n.h (GNUPG_GCC_ATTR_FORMAT_ARG): New. Use for
i18n_localegettext. Expand LunderscorePROTO.
* agent/genkey.c (check_passphrase_constraints): Use xtryasprintf
again to keep the old translations.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* po/Makevars (XGETTEXT_OPTIONS): Add keyword "L_".
* common/i18n.c (i18n_localegettext): New stub.
* common/i18n.h: Expand the LunderscoreIMPL macro.
* agent/agent.h (L_): New.
(LunderscoreIMPL): New.
* agent/call-pinentry.c (setup_qualitybar): Add arg ctrl anc change
caller.
* agent/findkey.c (try_unprotect_cb): Add local var ctrl.
* agent/genkey.c (check_passphrase_constraints): Replace xtryasprintf
by xtrystrdup to avoid gcc warning. Unfortinately this changes the
string.
(agent_ask_new_passphrase): Cleanup the use of initial_errtext.
--
Static strings in gpg-agent need to be translated according to the
locale set by the caller. This is required so that a gpg-agent can be
started in one locale and a gpg can be run in another. If we don't do
this the static strings (prompt, buttons) are not or in the wrong
locale translated while dynamic strings (e.g. key description) uses
the locale of gpg.
This is only the first part of the change the actual local switching
still needs to be implemented.
Debian-bug-id: 788983
Signed-off-by: Werner Koch <wk@gnupg.org>
