This patch implementes a chunk mode to pass the key parameters from
scdaemon to gpg. This allows to pass arbitrary long key paremeters;
it is used for keys larger than 3072 bit.
Note: the card key generation in gpg is currently broken. The keys
are generated but it is not possible to create the self-signature
because at that time the gpg-agent does not yet know about the new
keys and thus can't divert the sign request to the card. We either
need to run the learn command right after calling agent_scd_genkey or
implement a way to sign using the currently inserted card. Another
option would be to get rid of agent_scd_genkey and implement the
feature directly in agent_genkey.
This is not a part of pin pad support series of mine.
As I found the bug while I am preparing the patches, I report this.
As CCID protocol is little endian, wLangId of US English = 0x0409
is represented as two bytes of 0x09 then 0x04.
It is really confusing that the code like following is floating
around:
pin_verify -> wLangId = HOST_TO_CCID_16(0x0904);
But, it is 0x0409 (not 0x0904). It is defined in the documentation:
http://www.usb.org/developers/docs/USB_LANGIDs.pdf
and origin of this table is Microsoft. We can see it at:
http://msdn.microsoft.com/en-us/library/bb165625%28VS.80%29.aspx
Yes, it would be better not to hard-code 0x0409. It would be better
to try current locale of the user, or to use the first entry of string
descriptor. I don't have time to implement such a thing...
This solves a problem where ccid was used, the card unplugged and then
scdaemon tries to find a new (plugged in) reader and thus will
eventually try PC/SC over and over again.
Also added an explicit --kill command to gpgconf.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
From Grant Olsons's mail to gnupg-devel@:
This is three-quarters NIIBE and one-quarter me, but I though it would
be easier to have a single complete patch that applies to
STABLE-BRANCH-2-0 than two patches floating around.
This is basically NIIBE Yatuka's patch here:
http://lists.gnupg.org/pipermail/gnupg-devel/2010-November/025828.html
Plus another check that closes down the reader explicitly if we get a
SW_HOST_NO_READER error, so that an unplugged reader doesn't hold onto
the first slot, preventing us from getting to the active plugged reader.
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* command.c (start_command_handler): Use assuan_fd_t and
assuan_fdopen on fds.
scd/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* command.c (scd_command_handler): Use assuan_fd_t and
assuan_fdopen on fds.
sm/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* server.c (gpgsm_server): Use assuan_fd_t and assuan_fdopen on
fds.
g10/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* server.c (gpg_server): Use assuan_fd_t and assuan_fdopen on fds.
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* call-pinentry.c (start_pinentry): Call assuan_pipe_connect, not
assuan_pipe_connect_ext.
* command.c (start_command_handler): Change
assuan_init_socket_server_ext into assuan_init_socket_server.
* call-scd.c (start_scd): Update use of assuan_socket_connect and
assuan_pipe_connect.
* gpg-agent.c (check_own_socket_thread, check_for_running_agent):
Update use of assuan_socket_connect.
common/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Update use of
assuan_socket_connect and assuan_pipe_connect.
scd/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* command.c (scd_command_handler): Call assuan_init_socket_server,
not assuan_init_socket_server_ext.
sm/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* call-dirmngr.c (start_dirmngr_ext): Update use of
assuan_pipe_connect and assuan_socket_connect.
tools/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (start_agent): Update use of
assuan_socket_connect and assuan_pipe_connect.
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* command.c (reset_notify): Take LINE arg and return error.
(register_commands): Use assuan_handler_t type.
common/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* get-passphrase.c (default_inq_cb, membuf_data_cb): Change return
type to gpg_error_t.
g10/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* server.c (reset_notify, input_notify, output_notify): Update to
new assuan interface.
(register_commands): Use assuan_handler_t.
scd/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* command.c (reset_notify): Take LINE arg and return error.
(register_commands): Use assuan_handler_t type.
sm/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* server.c (reset_notify, input_notify, output_notify): Update to
new assuan interface.
(register_commands): Use assuan_handler_t.
* call-agent.c (membuf_data_cb, default_inq_cb)
(inq_ciphertext_cb, scd_serialno_status_cb)
(scd_keypairinfo_status_cb, istrusted_status_cb)
(learn_status_cb, learn_cb, keyinfo_status_cb): Return gpg_error_t.
* configure.ac (NEED_LIBASSUAN_API, NEED_LIBASSUAN_VERSION):
Update to new API (2, 1.1.0).
agent/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-agent.c (parse_rereadable_options): Don't set global assuan
log file (there ain't one anymore).
(main): Update to new API.
(check_own_socket_pid_cb): Return gpg_error_t instead of int.
(check_own_socket_thread, check_for_running_agent): Create assuan
context before connecting to server.
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(write_and_clear_outbuf): Use gpg_error_t instead of
assuan_error_t.
(cmd_geteventcounter, cmd_istrusted, cmd_listtrusted)
(cmd_marktrusted, cmd_havekey, cmd_sigkey, cmd_setkeydesc)
(cmd_sethash, cmd_pksign, cmd_pkdecrypt, cmd_genkey, cmd_readkey)
(cmd_keyinfo, cmd_get_passphrase, cmd_clear_passphrase)
(cmd_get_confirmation, cmd_learn, cmd_passwd)
(cmd_preset_passphrase, cmd_scd, cmd_getval, cmd_putval)
(cmd_updatestartuptty, cmd_killagent, cmd_reloadagent)
(cmd_getinfo, option_handler): Return gpg_error_t instead of int.
(post_cmd_notify): Change type of ERR to gpg_error_t from int.
(io_monitor): Add hook argument. Use symbols for constants.
(register_commands): Change return type of HANDLER to gpg_error_t.
(start_command_handler): Allocate assuan context before starting
server.
* call-pinentry.c: Include "scdaemon.h" before <assuan.h> because
of GPG_ERR_SOURCE_DEFAULT check.
(unlock_pinentry): Call assuan_release instead of
assuan_disconnect.
(getinfo_pid_cb, getpin_cb): Return gpg_error_t instead of int.
(start_pinentry): Allocate assuan context before connecting to
server.
* call-scd.c (membuf_data_cb, learn_status_cb, get_serialno_cb)
(membuf_data_cb, inq_needpin, card_getattr_cb, pass_status_thru)
(pass_data_thru): Change return type to gpg_error_t.
(start_scd): Allocate assuan context before connecting to server.
common/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Allocate assuan context before
starting server.
g10/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* call-agent.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(learn_status_cb, dummy_data_cb, get_serialno_cb, default_inq_cb)
(learn_status_cb, inq_writecert_parms, inq_writekey_parms)
(scd_genkey_cb, membuf_data_cb): Return gpg_error_t instead of
int.
* gpg.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(main): Update to new Assuan API.
* server.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, do_listkeys, cmd_listkeys)
(cmd_listsecretkeys, cmd_genkey, cmd_getinfo): Return gpg_error_t
instead of int.
(register_commands): Allocate assuan context before starting
server.
(gpg_server): Allocate assuan_context before starting server.
scd/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, open_card, cmd_serialno, cmd_lean, cmd_readcert)
(cmd_readkey, cmd_setdata, cmd_pksign, cmd_pkauth, cmd_pkdecrypt)
(cmd_getattr, cmd_setattr, cmd_writecert, cmd_writekey)
(cmd_genkey, cmd_random, cmd_passwd, cmd_checkpin, cmd_lock)
(cmd_unlock, cmd_getinfo, cmd_restart, cmd_disconnect, cmd_apdu)
(cmd_killscd): Return gpg_error_t instead of int.
(scd_command_handler): Allocate assuan context before starting server.
* scdaemon.c (main): Update to new Assuan API.
sm/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpgsm.c (main): Update to new assuan API.
* server.c: Include "gpgsm.h" before <assuan.h> due to check for
GPG_ERR_SOURCE_DEFAULT and assuan.h now including gpg-error.h.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, cmd_listkeys, cmd_dumpkeys)
(cmd_listsecretkeys, cmd_dumpsecretkeys, cmd_genkey)
(cmd_getauditlog, cmd_getinfo): Return gpg_error_t instead of int.
(register_commands): Same for member HANDLER in table.
(gpgsm_server): Allocate assuan context before starting server.
* sm/call-dirmngr.c:
* call-dirmngr.c (prepare_dirmngr): Check for CTX and error before
setting LDAPSERVER.
(start_dirmngr_ext): Allocate assuan context before starting
server.
(inq_certificate, isvalid_status_cb, lookup_cb, lookup_status_cb)
(run_command_cb, run_command_inq_cb, run_command_status_cb):
Return gpg_error_t instead of int.
tools/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (getinfo_pid_cb, read_and_print_response)
(main): Update to new Assuan API.
progress_cb and progress_cb_arg.
(ccid_set_progress_cb): New.
(print_progress): New.
(ccid_transceive): Call print_progress for wait time extensions.
* apdu.c (struct reader_table_s): Add field set_progress_cb.
(new_reader_slot): Clear that field.
(open_ccid_reader): Set it to ..
(set_progress_cb_ccid_reader): ... new fucntion.
* app.c (print_progress_line): New.
(lock_reader): Add arg CTRL to set a progress callback and
change all callers to provide it.
(unlock_reader): Remove the progress callback.
* scdaemon.c (main): Use estream_asprintf instead of asprintf.
* command.c (update_reader_status_file): Likewise.
(cmd_serialno): Use estream_asprintf instead of asprintf
and xfree instead of free to release memory allocated
through (estream_)asprintf.
(cmd_learn): Likewise.
(pin_cb): Likewise.
* app-openpgp.c (get_public_key): Likewise.
g10/
* passphrase.c (passphrase_get): Set the cancel flag on all error
from the agent. Fixes a bug reported by Tom Duerbusch.
sm/
* gpgsm.c (main): Let --gen-key print a more informative error
message.
doc/
* com-certs.pem: Added the current root certifcates of D-Trust and
S-Trust.
g10/
* status.c (write_status_begin_signing): New.
* sign.c (sign_file, sign_symencrypt_file): Call it.
* textfilter.c (copy_clearsig_text): Call it.
* call-agent.c (agent_scd_pksign): Pass --hash-rmd160 to SCD if
required.
* gpg.c (main): Let --no-use-agent and --gpg-agent-info print a
warning.
* misc.c (obsolete_option): New.
* protect-tool.c (get_passphrase): New arg OPT_CHECK.
(get_new_passphrase): Enable OTP_CHECK on the first call.
* command.c (cmd_get_passphrase): Implement option --check.
* gpg-agent.c (MIN_PASSPHRASE_LEN): New
(parse_rereadable_options): New option --min-passphrase-len.
* genkey.c (check_passphrase_constraints): New.
(agent_genkey, agent_protect_and_store): Call new function. Fix
memory leak.
* call-pinentry.c (agent_askpin): Allow translation of the displayed
error message.
(agent_popup_message_start): Remove arg CANCEL_BTN.
(popup_message_thread): Use --one-button option.
* command.c (cmd_passwd): Now that we don't distinguish between
assuan and regular error codes we can jump to the end on error.
common/
* simple-pwquery.c (simple_pwquery): New arg OPT_CHECK.
* command.c (get_reader_slot): Return the slot_table index, not
the APDU slot number.
(update_reader_status_file): Use the slot_table index in the
update_card_removed invocation.
* app.c (select_application): Cover up a slot mismatch error in
case it happens (it shouldn't happen).
(release_application): Use APP->slot. Lock the reader.
(application_notify_card_removed): Lock the reader.
char * vs. unsigned char * warnings. The GNU coding standards used to
say that these mismatches are okay and better than a bunch of casts.
Obviously this has changed now.
* gpg-agent.c: New option --write-env-file.
* gpg-agent.c (handle_connections): Make sure that the signals we
are handling are not blocked.Block signals while creating new
threads.
* estream.c: Use HAVE_CONFIG_H and not USE_CONFIG_H!
(es_func_fd_read, es_func_fd_write): Protect against EINTR.
* gpg-agent.texi (Agent UPDATESTARTUPTTY): New.
* scdaemon.c (handle_connections): Make sure that the signals we
are handling are not blocked.Block signals while creating new
threads.
(handle_connections): Include the file descriptor into the name of
the thread.
* dynload.h: s/__inline__/inline/.
* tlv.c [GNUPG_MAJOR_VERSION==1]: Define constants instead of
including a gnupg 1.4 header.
* watchgnupg.c: Make sure that PF_LCOAL and AF_LOCAL are defines.
Noted by Ray Link.
good.
(do_close_reader): Never do a reset. The caller should instead
make sure that the reader has been closed properly. The new retry
code in ccid_slot_status will make sure that the readersatrts up
fine even if the last process didn't closed the USB connection
properly.
(ccid_get_atr): For certain readers try switching to ISO mode.
Thanks to Ludovic Rousseau for this hint and the magic numbers.
(print_command_failed): New.
(bulk_in): Use it here. Add new arg NO_DEBUG.
(agent_scd_check_aliveness): New.
* gpg-agent.c (handle_tick): Test for an alive scdaemon.
(handle_signal): Print thread info on SIGUSR1.
* scdaemon.c (handle_signal): Print thread info on SIGUSR1.
(show_file): Implement it.
* keyformat.txt: Define the created-at attribute for keys.
* ccid-driver.c: Replaced macro DEBUG_T1 by a new debug level.
(parse_ccid_descriptor): Mark SCR335 firmware version 5.18 good.
(ccid_transceive): Arghhh. The seqno is another bit in the
R-block than in the I block, this was wrong at one place.
* scdaemon.c: New options --debug-ccid-driver and
--debug-disable-ticker.
* app-openpgp.c (do_genkey, do_writekey): Factored code to check
for existing key out into ..
(does_key_exist): .. New function.
* gpg-connect-agent.c (add_definq, show_definq, clear_definq)
(handle_inquire): New.
(read_and_print_response): Handle INQUIRE command.
(main): Implement control commands.
(do_sign): Call it.
* iso7816.c (iso7816_manage_security_env): Allow passing DATA as
NULL to indicate an empty Lc.
* tlv.c (find_tlv): Check that a found object fits into the
buffer.
(find_tlv_unchecked): New as replacement for the old non-checking
variant.
* app.c (select_application): Keep on using the non-checking
variant.
* app-openpgp.c (get_one_do, dump_all_do): Ditto.
* acinclude.m4: Ditto.
* scdaemon.texi: Removed OpenSC specific options.
* app-p15.c: New. Basic support for pkcs15 cards without OpenSC.
There are quite a couple of things missing but at least I can use
my old TCOS cards from the Aegypten-1 development for signing.
* app.c (select_application): Detect pkcs15 applications.
* Makefile.am (scdaemon_SOURCES): Removed card.c, card-common.h
and card-p15.c because they are now obsolete. Added app-p15.c.
Removed all OpenSC stuff.
* command.c (do_reset, open_card, cmd_serialno, cmd_learn)
(cmd_readcert, cmd_readkey, cmd_pksign, cmd_pkdecrypt): Removed
all special cases for the old card.c based mechanisms.
* scdaemon.c, apdu.c: Removed all special cases for OpenSC.
* gpgsm.c: New options --{enable,disable}-trusted-cert-crl-check.
* certchain.c (gpgsm_validate_chain): Make use of it.
* certchain.c (gpgsm_validate_chain): Check revocations even for
expired certificates. This is required because on signature
verification an expired key is fine whereas a revoked one is not.
* gpgconf-comp.c: Add gpgsm option disable-trusted-cert-crl-check.
proper error code.
(retrieve_next_token): Removed.
(retrieve_fpr_from_card): Rewritten to make use of DO caching and
to take the KEYNO as arg.
(get_public_key): Renamed variable for clarity.
* app-openpgp.c (retrieve_fpr_from_card): New function.
(retrieve_next_token): New function.
(retrieve_key_material): New function.
(get_public_key): Implement retrival of key through expernal
helper (gpg) in case the openpgp card is not cooperative enough.
%0A may pass through.
* agent.h (server_control_s): New field USE_AUTH_CALL.
* call-scd.c (agent_card_pksign): Make use of it.
* command-ssh.c (data_sign): Set the flag.
(ssh_send_key_public): New arg OVERRIDE_COMMENT.
(card_key_available): Add new arg CARDSN.
(ssh_handler_request_identities): Use the card s/n as comment.
(sexp_key_extract): Use GCRYMPI_FMT_STD.
(data_sign): Ditto.
* learncard.c (make_shadow_info): Moved to ..
* protect.c (make_shadow_info): .. here. Return NULL on malloc
failure. Made global.
* agent.h: Add prototype.
* xasprintf.c (xtryasprintf): New.
* app-openpgp.c (get_public_key): Make sure not to return negative
numbers.
(do_sign): Allow passing of indata with algorithm prefix.
(do_auth): Allow OPENPGP.3 as an alternative ID.
* app.c (app_getattr): Return just the S/N but not the timestamp.
* no-libgcrypt.c (gcry_strdup): New.
../g10/call-agent.c
(card_getattr_cb, agent_card_getattr): New.
* command-ssh.c (card_key_available): New.
(ssh_handler_request_identities): First see whether a card key is
available.
* app.c (app_getattr): Return APPTYPE or SERIALNO type even if the
application does dot support the getattr call.
* app.c (select_application): Return an error code and the
application context in an new arg.
* command.c (open_card): Adjusted for that. Don't use the
fallback if no card is present. Return an error if the card has
been removed without a reset.
(do_reset, cmd_serialno): Clear that error flag.
(TEST_CARD_REMOVAL): New. Use it with all command handlers.
(scd_update_reader_status_file): Set the error flag on all changes.
select returns with -1.
* tools.texi (gpg-connect-agent): New.
* app-openpgp.c (get_one_do): Never try to get a non cacheable
object from the cache.
(get_one_do): Add new arg to return an error code. Changed all
callers.
(do_getattr): Let it return a proper error code.
* app.c (select_application): Return an error code and the
application context in an new arg.
* command.c (open_card): Adjusted for that. Don't use the
fallback if no card is present. Return an error if the card has
been removed without a reset.
(do_reset, cmd_serialno): Clear that error flag.
(TEST_CARD_REMOVAL): New. Use it with all command handlers.
* scdaemon.c (ticker_thread): Termintate if a shutdown is pending.
* apdu.c: Added some PCSC error codes.
(pcsc_error_to_sw): New.
(reset_pcsc_reader, pcsc_get_status, pcsc_send_apdu)
(open_pcsc_reader): Do proper error code mapping.
* gpg-connect-agent.c: New.
* Makefile.am: Add it.
(scan_or_find_devices): Add new args to return endpoint info and
interface number.
(ccid_open_reader, ccid_shutdown_reader): Take care of these new
args.
(bulk_in, bulk_out): Use the correct endpoints.
(ccid_transceive_apdu_level): New.
(ccid_transceive): Divert to above.
(parse_ccid_descriptor): Allow APDU level exchange mode.
* POTFILES.in: Add more files.
* app-openpgp.c (do_sign): Add the error string to the verify
failed messages.
* keylist.c (list_cert_colon): Make sure that the expired flag has
a higher precedence than the invalid flag.
--with-validation is set.
* certchain.c (gpgsm_basic_cert_check): Print more detailed error
messages.
* certcheck.c (do_encode_md): Partly support DSA. Add new arg
PKALGO. Changed all callers to pass it.
(pk_algo_from_sexp): New.
tests/pkits: New directory
stable version 0.1.x.
* scdaemon.texi (Card applications): New section.
* scdaemon.c (main): New option --disable-application.
* app.c (is_app_allowed): New.
(select_application): Use it to check for disabled applications.
* ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New.
* ccid-driver.c (ccid_open_reader): Support the stable 0.1 version
of libusb.
(ccid_get_atr): Handle short messages.
* apdu.c (my_rapdu_get_status): Implemented.
* Makefile.am: Make OpenSC lib link after libgcrypt. Do not link
to pth.
* apdu.c: Don't use Pth if we use OpenSC.
* sc-investigate.c, scdaemon.c: Disable use of pth if OpenSC is used.
* scdaemon.c (main): Bumbed thread stack size up to 512k.
(apdu_close_reader, apdu_get_status, apdu_activate)
(send_apdu): Make use of them.
(new_reader_slot): Intialize them to NULL.
(dump_ccid_reader_status, ct_dump_reader_status): New.
(dump_pcsc_reader_status): New.
(open_ct_reader, open_pcsc_reader, open_ccid_reader)
(open_osc_reader, open_rapdu_reader): Intialize function pointers.
(ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu)
(error_string): Removed. Replaced by apdu_strerror.
(get_ccid_error_string): Removed.
(ct_activate_card): Remove the unused loop.
(reset_ct_reader): Implemented.
(ct_send_apdu): Activate the card if not yet done.
(pcsc_send_apdu): Ditto.
the client.
(option_handler): Parse the new event-signal option.
* scdaemon.c (handle_signal): Do not use SIGUSR{1,2} anymore for
changing the verbosity.
* app-help.c (app_help_read_length_of_cert): Fixed calculation of
R_CERTOFF.
* pcsc-wrapper.c: New.
* Makefile.am (pkglib_PROGRAMS): Install it here.
* apdu.c (writen, readn): New.
(open_pcsc_reader, pcsc_send_apdu, close_pcsc_reader): Use the
pcsc-wrapper if we are using Pth.
(apdu_send_le): Reinitialize RESULTLEN. Handle SW_EOF_REACHED
like SW_SUCCESS.
* Makefile.am (pkglib_PROGRAMS): Install it here.
* apdu.c (writen, readn): New.
(open_pcsc_reader, pcsc_send_apdu, close_pcsc_reader): Use the
pcsc-wrapper if we are using Pth.
Introduce PACKAGE_GT and set it to gnupg2.
* gpg-agent.c (main): Use new libgcrypt thread library register
scheme.
* Makevars (DOMAIN): Init from PACKAGE_GT
* app-nks.c (get_length_of_cert): Removed.
* app-help.c: New.
(app_help_read_length_of_cert): New. Code taken from above. New
optional arg R_CERTOFF.
* card-dinsig.c: Removed.
* card.c (card_get_serial_and_stamp): Do not bind to the old and
never finsiged card-dinsig.c.
* iso7816.c (iso7816_read_binary): Allow for an NMAX > 254.
(export_p12_file): Read a certificate from STDIN and pass it to
p12_build. Detect a keygrip and construct the filename in that
case. Unprotcet a key if needed. Print error messages for key
formats we can't handle.
(release_passphrase): New.
(get_passphrase): New arg PROMPTNO. Return the allocated
string. Changed all callers.
* minip12.c: Revamped the build part.
(p12_build): New args CERT and CERTLEN.
* simple-pwquery.c (agent_open): Don't mangle INFOSTR.
* export.c (export_p12, popen_protect_tool)
(gpgsm_p12_export): New.
* gpgsm.c (main): New command --export-secret-key-p12.
length and not the 64 bytes we used for testing.
* app-openpgp.c (verify_chv2, verify_chv3, do_sign): Check the
minimum length of the passphrase, so that we don't need to
decrement the retry counter.
structure, so that it can indeed be updated.
* card-util.c (fpr_is_zero): New.
(generate_card_keys): New.
(card_edit): New command "generate".
* keygen.c (generate_keypair): New arg CARD_SERIALNO, removed call
to check_smartcard.
(check_smartcard,show_smartcard): Removed.
(show_sha1_fpr,fpr_is_zero): Removed.
* app-openpgp.c (do_getattr): Support SERIALNO and AID.
* app.c (app_setattr): New.
(do_getattr): New.
(do_learn_status): Reimplemented in terms of do_getattr.
* app-openpgp.c (do_change_pin): Make sure CVH1 and CHV2 are
always synced.
(verify_chv2, verify_chv3): New. Factored out common code.
(do_setattr, do_sign, do_auth, do_decipher): Change the names of
the prompts to match that we have only 2 different PINs.
(app_select_openpgp): Check whether the card enforced CHV1.
(convert_sig_counter_value): New. Factor out code from
get_sig_counter.
* misc.c (openpgp_pk_algo_usage): Allow AUTH where SIGN is allowed.
* keygen.c (ask_passphrase): No need to allocated S2K in secure
memory.
* scdaemon.c (main): --pcsc-driver again defaults to pcsclite.
David Corcoran was so kind to remove the GPL incompatible
advertisng clause from pcsclite.
* apdu.c (apdu_open_reader): Actually make pcsc-driver option work.
* scdaemon.c, scdaemon.h: New option --pcsc-ccid.
* ccid-driver.c, ccid-driver.h: New but far from being useful.
* Makefile.am: Add above.
* apdu.c: Add support for that ccid driver.
* card.c (card_open): Implement it.
* apdu.c (open_osc_reader, osc_send_apdu): New.
(apdu_open_reader) [HAVE_OPENSC]: Use the opensc driver if not
disabled.
(error_string) [HAVE_OPENSC]: Use sc_strerror.
(send_apdu) [HAVE_OPENSC]: Call osc_apdu_send.
* card-p15.c (p15_enum_keypairs, p15_prepare_key): Adjusted for
libgpg-error.
* scdaemon.c, scdaemon.h: New option --disable-opensc.
* card.c (card_open): Implement it.
* apdu.c (open_osc_reader, osc_send_apdu): New.
(apdu_open_reader) [HAVE_OPENSC]: Use the opensc driver if not
disabled.
(error_string) [HAVE_OPENSC]: Use sc_strerror.
(send_apdu) [HAVE_OPENSC]: Call osc_apdu_send.
* card-common.h (struct p15_private_s): Forward declaration. Add
it to card_ctx_s.
* card.c (card_close): Make sure private data is released.
(card_enum_certs): New.
* card-p15.c (p15_release_private_data): New.
(init_private_data): New to work around an OpenSC weirdness.
(p15_enum_keypairs): Do an OpenSC get_objects only once.
(p15_enum_certs): New.
(card_p15_bind): Bind new function.
* command.c (cmd_learn): Return information about the certificates.
it to card_ctx_s.
* card.c (card_close): Make sure private data is released.
* card-p15.c (p15_release_private_data): New.
(init_private_data): New to work around an OpenSC weirdness.
(p15_enum_keypairs): Do an OpenSC get_objects only once.
* call-agent.c (start_agent): Create and pass the list of FD to
keep in the child to assuan.
* call-dirmngr.c (start_dirmngr): Ditto.
* scdaemon.c (main): Use GNUPG_DEFAULT_HOMEDIR constant.
* assuan-pipe-connect.c (assuan_pipe_connect): No special handling
for the log_fd and stderr. Connect stderr to /dev/null if it
should not be retained.
* card.c (card_open): set it here.
* card-p15.c (p15_prepare_key): Factored out common code from ...
(p15_sign, p15_decipher): here and made the decryption work the
regular way.
* gpgsm.c: New command --learn-card
* call-agent.c (learn_cb,gpgsm_agent_learn): New.
* gpgsm.c (main): Print error messages for non-implemented commands.
agent/
* learncard.c: New.
* divert-scd.c (ask_for_card): The serial number is binary so
convert it to hex here.
* findkey.c (agent_write_private_key): New.
* genkey.c (store_key): And use it here.
scd/
* pkdecrypt.c (agent_pkdecrypt): Changed the way the diversion is done.
* divert-scd.c (divert_pkdecrypt): Changed interface and
implemented it.
