* common/openpgp-oid.c (openpgp_is_curve_supported): Add optional arg
R_ALGO and change all callers.
* common/util.h (GPG_ERR_UNKNOWN_FLAG): New error code.
* g10/options.h (struct opt): Add field DEF_NEW_KEY_ALGO.
* g10/gpg.c (oDefaultNewKeyAlgo): New enum.
(opts): New option "--default-new-key-algo".
(main): Set the option.
* g10/keygen.c: Remove DEFAULT_STD_ FUTURE_STD_ constants and replace
them by ...
(DEFAULT_STD_KEY_PARAM, FUTURE_STD_KEY_PARAM): new string constants.
(get_keysize_range): Remove arg R_DEF and return that value instead.
Change all callers.
(gen_rsa): Use get_keysize_range instead of the removed
DEFAULT_STD_KEYSIZE.
(parse_key_parameter_part): New function.
(parse_key_parameter_string): New function.
(quick_generate_keypair): Refactor using parse_key_parameter_string.
(generate_keypair): Ditto.
(parse_algo_usage_expire): Ditto.
--
This new option is intended to be used in the forthcoming
--set-profile command of gpgconf. It allows to provide a gpg
configuration with custom defaults for a new key using the simple
commands which use the default algorithm set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (CO_DE_VS): New.
(GNUPG): Also allow CO_DE_VS.
* g10/gpg.c (oDE_VS): New.
(parse_compliance_option): Add "de-vs".
(set_compliance_option): Set "de-vs".
* g10/misc.c (compliance_option_string): Return a description string.
(compliance_failure): Ditto.
* g10/keygen.c (ask_algo): Take care of CO_DE_VS.
(get_keysize_range): Ditto.
(ask_curve): Add new field to CURVES and trun flags into bit flags.
Allow only Brainpool curves in CO_DE_VS mode.
--
As of now this compliance mode only restricts the set of algorithms
and curves which can be created.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (DBG_MPI): New.
* g10/gpg.c (set_debug): Use macro or extra parens for binary operator.
* g10/parse-packet.c (set_packet_list_mode): Use dbg macro.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oWithTofuInfo): New.
(opts): Add --with-tofu-info.
(main): Set opt.with_tofu_info.
* g10/options.h (struct opt): Add field WITH_TOFU_INFO.
* g10/tofu.c (show_statistics): Add optional arg OUTFP and enter
special mode if not NULL. Change all callers.
(tofu_write_tfs_record): New.
* g10/keylist.c (list_keyblock_colon): Do not print the tofu policy as
part of the "uid" record. Print a new "tfs" record if the new option
is set.
* tests/openpgp/tofu.scm (getpolicy): Change from UID to TFS record.
--
A separate option is required to avoid slowing down key listings.
Foer example the current code takes for a keylisting in tofu+pgp mode
17 seconds while it takes more than 5 minutes if the option is used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (struct opt): Add field 'sender_list'.
* g10/gpg.c: Include mbox-util.h.
(oSender): New.
(opts): Add option "--sender".
(main): Parse option.
--
This option will eventually be used for more advanced purposes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h: Include stdint.h.
(struct opt): Add field 'input_size_hint'.
* g10/gpg.c (oInputSizeHint): New.
(opts): Add --input-size-hint.
(main): Set opt.input_size_hint.
* g10/progress.c (write_status_progress): Use the hint.
--
This is a prerequisite to fix
GnuPG-bug-id: 2368
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (struct opt): Remove field tofu_db_format.
* g10/gpg.h (server_control_s): Add fields tofu.batch_update_ref and
tofu.batch_update_started.
* g10/gpg.c (parse_tofu_db_format): Remove.
(main): Make option --tofu-db-format obsolete.
* g10/tofu.c: Major rework. Remove the pretty complicated and slower
split format and with that all the caching. Use the dbs struct
directly. Move global vars for batch update into CTRL. Change
calling conventions of some function to take CTRL or DBS pointers
instead of the former low-level database pointer.
--
The split database format might have been nice for use with Unison but
it bypasses the concept of a relational database by doing parts of
this itself and also risking deadlocks. Working with the Tofu
database for debugging or experiments is also not possible with parts
of the database logic implemented in gpg.
The Tofu support is quite new and we can assume that it is not in real
use now. Thus we better remove that now so that we do not need to
maintain it for all future.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oMimemode): New.
(opts): Add --mimemode.
(main): Use --mimemode only in rfc4880bis compliance mode.
* g10/options.h (struct opt): Add field "mimemode".
* g10/build-packet.c (do_plaintext): Allow for mode 'm'.
* g10/encrypt.c (encrypt_simple, encrypt_crypt): Use 'm' if requested.
* g10/plaintext.c (handle_plaintext): Handle 'm' mode.
* g10/sign.c (write_plaintext_packet): Handle 'm' mode.
(sign_file, sign_symencrypt_file): Use 'm' if requested.
--
Thsi patch prepares for a proposed change in RFC4880bis to support a
MIME flag. A literal data packet with the mime flag set is handled
like a 't' or 'u' but CR are not removed. The PLAINTEXT status line
will also indicate a MIME content.
If --mimemode is used without --rfc4880bis 't' will be used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (EXPORT_PKA_FORMAT): New.
* g10/keylist.c (list_keyblock_pka): Do not use DANE flag.
* g10/export.c: Include zb32.h.
(parse_export_options): Add options "export-pka" and "export-dane".
(do_export): Do not armor if either of these option is set.
(print_pka_or_dane_records): New.
(do_export_stream): Implement new options.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (parse_import_options): Add option "import-export".
(write_keyblock_to_output): New.
(import_one): Implement option.
--
We are now in the import export business.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (struct opt): Add field flags.rfc4880bis.
* g10/gpg.c (oRFC4880bis): new.
(opts): add --rfc4880bis.
(main): Implement that and print a warning.
--
This is option enables experimental features which may be dropped or
changed with the next release.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oDisableSignerUID): New.
(opts): New option '--disable-signer-uid'.
(main): Set option.
* g10/options.h (opt): Add field flags.disable_signer_uid.
* g10/sign.c: Include mbox-util.h.
(mk_notation_policy_etc): Embed the signer's uid.
* g10/mainproc.c (check_sig_and_print): Do not use WKD for auto key
retrieval if --disable-signer-uid is used.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add option "none" to --keyid-format.
* g10/options.h (KF_NONE): New.
* g10/keyid.c (format_keyid): Implement that.
(keystr): Use format "long" is KF_NONE is in use.
(keystr_with_sub): Ditto.
* g10/keylist.c (list_keyblock_print): Adjust indentaion for KF_NONE.
Factor some code out to ...
(print_key_line): new.
(print_fingerprint): Add mode 20.
* g10/mainproc.c (list_node): Use print_key_line. Replace MAINKEY by
flags.primary in the PK. Fix putting a " revoked..." string into the
colons format.
* g10/pkclist.c (do_edit_ownertrust): Use print_key_line. This
slightly changes the putput format.
* g10/revoke.c (gen_standard_revoke): Use print_key_line. This may
also put "expires: " into the output.
--
Due to user experience problems with the keyid and we better allow to
show the fingerprint instead. Note that we do not support v3 keys
anymore and thus there is no technical need for a user to know the
keyid.
GnuPG-bug-id: 2379
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (parse_auto_key_locate): Add method "wkd".
(get_pubkey_byname): Implement that method. Also rename a variable.
* g10/call-dirmngr.c (gpg_dirmngr_wkd_get): New.
* g10/keyserver.c (keyserver_import_wkd): New.
* g10/test-stubs.c (keyserver_import_wkd): Add stub.
* g10/gpgv.c (keyserver_import_wkd): Ditto.
* g10/options.h (opt): Add field 'with_wkd_hash'.
(AKL_WKD): New.
* g10/gpg.c (oWithWKDHash): New.
(opts): Add option --with-wkd-hash.
(main): Set that option.
* g10/keylist.c (list_keyblock_print): Implement that option.
--
The Web Key Directory is an experimental feature to retrieve a key via
https. It is similar to OpenPGP DANE but also uses an encryption to
reveal less information about a key lookup.
For example the URI to lookup the key for Joe.Doe@Example.ORG is:
https://example.org/.well-known/openpgpkey/
hu/example.org/iy9q119eutrkn8s1mk4r39qejnbu3n5q
(line has been wrapped for rendering purposes). The hash is a
z-Base-32 encoded SHA-1 hash of the mail address' local-part. The
address wk@gnupg.org can be used for testing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt.keyid_format): Add new value KF_DEFAULT.
* g10/keyid.c (format_keyid): New function.
(keystr): Use it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/options.h (opt): Add field only_sign_text_ids.
* g10/gpg.c (enum cmd_and_opt_values): Add value oOnlySignTextIDs.
(opts): Handle oOnlySignTextIDs.
(main): Likewise.
* g10/keyedit.c (sign_uids): If OPT.ONLY_SIGN_TEXT_IDS is set, don't
select non-text based IDs automatically.
(keyedit_menu): Adapt the prompt asking to sign all user ids according
to OPT.ONLY_SIGN_TEXT_IDS.
* doc/gpg.texi: Document the new option --only-sign-text-ids.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1241
Debian-bug-id: 569702
* g10/decrypt-data.c (decrypt_data): If OPT.UNWRAP_ENCRYPTION is set,
copy the data to the output file instead of continuing to process it.
* g10/gpg.c (enum cmd_and_opt_values): Add new value oUnwrap.
(opts): Handle oUnwrap.
(main): Likewise.
* g10/options.h (opt): Add field unwrap_encryption.
* g10/plaintext.c (handle_plaintext): Break the output file selection
functionality into ...
(get_output_file): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1060
Debian-bug-id: 282061
* g10/main.h: Add rejection_shown flag to each weakhash struct
* g10/misc.c (print_digest_algo_note, additional_weak_digest): Do not
treat MD5 separately; (print_digest_rejected_note): Use
weakhash.rejection_shown instead of static shown.
* g10/options.h (opt): Change from additional_weak_digests to
weak_digests.
* g10/sig-check.c: Do not treat MD5 separately.
* g10/gpg.c (main): Explicitly set MD5 as weak.
* g10/gpgv.c (main): Explicitly set MD5 as weak.
--
Previously, only one weak digest rejection message was shown, of
whichever was the first type encountered. This meant that if "gpg
--weak-digest SHA224" encountered both an MD5 digest and a SHA224
digest, it would only show the user that the MD5 digest was rejected.
In order to let the user know which algorithms were rejected, we
needed to move the "shown" flag into a per-weak-algorithm location.
Given this additional complication, it made no sense to continue to
treat MD5 specially, so it is added as a default weak algorithm in the
same opt.weak_digests data structure as any other.
Signed-Off-By: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/options.h: Add additional_weak_digests linked list to opts.
* g10/main.h: Declare weakhash linked list struct and
additional_weak_digest() function to insert newly-declared weak
digests into opts.
* g10/misc.c: (additional_weak_digest): New function.
(print_digest_algo_note): Check for deprecated digests; use proper
gcry_md_algos type.
* g10/sig-check.c: (do_check): Reject weak digests in addition to MD5.
* g10/gpg.c: Add --weak-digest option to gpg.
* doc/gpg.texi: Document gpg --weak-digest option.
* g10/gpgv.c: Add --weak-digest option to gpgv.
* doc/gpgv.texi: Document gpgv --weak-digest option.
--
gpg and gpgv treat signatures made over MD5 as unreliable, unless the
user supplies --allow-weak-digests to gpg. Signatures over any other
digest are considered acceptable.
Despite SHA-1 being a mandatory-to-implement digest algorithm in RFC
4880, the collision-resistance of SHA-1 is weaker than anyone would
like it to be.
Some operators of high-value targets that depend on OpenPGP signatures
may wish to require their signers to use a stronger digest algorithm
than SHA1, even if the OpenPGP ecosystem at large cannot deprecate
SHA1 entirely today.
This changeset adds a new "--weak-digest DIGEST" option for both gpg
and gpgv, which makes it straightforward for anyone to treat any
signature or certification made over the specified digest as
unreliable.
This option can be supplied multiple times if the operator wishes to
deprecate multiple digest algorithms, and will be ignored completely
if the operator supplies --allow-weak-digests (as before).
MD5 is still always considered weak, regardless of any further
--weak-digest options supplied.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Capitialized some comments, shorted a line in do_check, and changed
subject to name the option. -wk
* configure.ac: Check for sqlite3.
(SQLITE3_CFLAGS): AC_SUBST it.
(SQLITE3_LIBS): Likewise.
* g10/Makefile.am (AM_CFLAGS): Add $(SQLITE3_CFLAGS).
(gpg2_SOURCES): Add tofu.h and tofu.c.
(gpg2_LDADD): Add $(SQLITE3_LIBS).
* g10/tofu.c: New file.
* g10/tofu.h: New file.
* g10/options.h (trust_model): Define TM_TOFU and TM_TOFU_PGP.
(tofu_db_format): Define.
* g10/packet.h (PKT_signature): Add fields digest and digest_len.
* g10/gpg.c: Include "tofu.h".
(cmd_and_opt_values): Declare aTOFUPolicy, oTOFUDefaultPolicy,
oTOFUDBFormat.
(opts): Add them.
(parse_trust_model): Recognize the tofu and tofu+pgp trust models.
(parse_tofu_policy): New function.
(parse_tofu_db_format): New function.
(main): Initialize opt.tofu_default_policy and opt.tofu_db_format.
Handle aTOFUPolicy, oTOFUDefaultPolicy and oTOFUDBFormat.
* g10/mainproc.c (do_check_sig): If the signature is good, copy the
hash to SIG->DIGEST and set SIG->DIGEST_LEN appropriately.
* g10/trustdb.h (get_validity): Add arguments sig and may_ask. Update
callers.
(tdb_get_validity_core): Add arguments sig and may_ask. Update
callers.
* g10/trust.c (get_validity) Add arguments sig and may_ask. Pass them
to tdb_get_validity_core.
* g10/trustdb.c: Include "tofu.h".
(trust_model_string): Handle TM_TOFU and TM_TOFU_PGP.
(tdb_get_validity_core): Add arguments sig and may_ask. If
OPT.TRUST_MODEL is TM_TOFU or TM_TOFU_PGP, compute the TOFU trust
level. Combine it with the computed PGP trust level, if appropriate.
* g10/keyedit.c: Include "tofu.h".
(show_key_with_all_names_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/keylist.c: Include "tofu.h".
(public_key_list): Also show the PGP stats if the trust model is
TM_TOFU_PGP.
(list_keyblock_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/pkclist.c: Include "tofu.h".
* g10/gpgv.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* g10/test-stubs.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* doc/DETAILS: Describe the TOFU Policy field.
* doc/gpg.texi: Document --tofu-set-policy, --trust-model=tofu,
--trust-model=tofu+pgp, --tofu-default-policy and --tofu-db-format.
* tests/openpgp/Makefile.am (TESTS): Add tofu.test.
(TEST_FILES): Add tofu-keys.asc, tofu-keys-secret.asc,
tofu-2183839A-1.txt, tofu-BC15C85A-1.txt and tofu-EE37CF96-1.txt.
(CLEANFILES): Add tofu.db.
(clean-local): Add tofu.d.
* tests/openpgp/tofu.test: New file.
* tests/openpgp/tofu-2183839A-1.txt: New file.
* tests/openpgp/tofu-BC15C85A-1.txt: New file.
* tests/openpgp/tofu-EE37CF96-1.txt: New file.
* tests/openpgp/tofu-keys.asc: New file.
* tests/openpgp/tofu-keys-secret.asc: New file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/options.h (opt): Add field "print_dane_records".
* g10/gpg.c (oPrintDANERecords): new.
(opts): Add --print-dane-records.
(main): Set that option.
* g10/export.c (do_export): Remove EXPORT_DANE_FORMAT handling.
(do_export_stream): Add EXPORT_DANE_FORMAT handling.
* g10/keylist.c (list_keyblock_pka): Implement DANE record printing.
* g10/gpgv.c (export_pubkey_buffer): New stub.
* g10/test-stubs.c (export_pubkey_buffer): New stub.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Remove --no-sig-create-check.
* g10/options.h (struct opt): Remove field no_sig_create_check.
* g10/sign.c (do_sign): Always check unless it is RSA and we are using
Libgcrypt 1.7.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (KEYSERVER_HTTP_PROXY): New.
(KEYSERVER_USE_TEMP_FILES, KEYSERVER_KEEP_TEMP_FILES): Remove.
(KEYSERVER_TIMEOUT): New.
* common/keyserver.h (KEYSERVER_TIMEOUT): Remove.
* g10/keyserver.c (keyserver_opts): Remove obsolete "use-temp-files"
and "keep-temp-files". Add "http-proxy" and "timeout".
(parse_keyserver_options): Remove 1.2 compatibility option
"honor-http_proxy". Remove "use-temp-files" and "keep-temp-files"
code.
--
Note that many of these options where implicitly used by passing any
unknown option down to the former keyserver helpers. The don't exist
anymore thus we need to make them explicit. Another patch will convey
them to dirmngr. Temp files are not anymore used thus they can be
removed and will be ignored when used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (DBG_LOOKUP_VALUE): Change to 8192.
* g10/options.h (DBG_LOOKUP_VALUE, DBG_LOOKUP): New.
* g10/getkey.c: Use DBG_LOOKUP instead of DBG_CACHE at most places.
* g10/gpg.c (main): Add command --print-pka-records.
* g10/options.h (struct opt): Add field "print_pka_records".
* g10/keylist.c (list_keyblock_pka): New.
(list_keyblock): Call it if new option is set.
(print_fingerprint): Add mode 10.
--
This is a fist step towards a slightly updated PKA implementation.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Remove keyserver_options.other.
* g10/gpg.c (main): Obsolete option --honor-http-proxt.
* g10/keyserver.c (add_canonical_option): Replace by ...
(warn_kshelper_option): New.
(parse_keyserver_uri): Obsolete "x-broken-http".
--
Some of these options are deprecated for 10 years and they do not make
any sense without the keyserver helpers. For one we print a hint on
how to replace it:
gpg: keyserver option 'ca-cert-file' is obsolete; \
please use 'hkp-cacert' in dirmngr.conf
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/armor.c (parse_hash_header,carmor_filter): Ignore MD5 in hash
header.
(fake_packet): Remove pgp-2 workaround for white space stripping.
* g10/filter.h (armor_filter_context_t): Remove field pgp2mode.
* g10/options.h (opt): Remove field pgp2_workarounds.
* g10/gpg.c (main): Do not set this field.
* g10/gpgv.c (main): Ditto.
* g10/mainproc.c (proc_encrypted): Use SHA-1 as fallback s2k hash
algo. Using MD5 here is useless.
(proc_plaintext): Remove PGP-2 related woraround
(proc_tree): Remove another workaround but keep the one for PGP-5.
--
The removed code was either not anymore used or its use would have
caused an error message later anyway.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_KEEP_OWNERTTRUST): New.
* g10/import.c (parse_import_options): Add "keep-ownertrust".
(import_one): Act upon new option.
--
This option is in particular useful to convert from a pubring.gpg to
the new pubring.kbx in GnuPG 2.1 or vice versa:
gpg1 --export | gpg2 --import-options keep-ownertrust --import
* g10/build-packet.c (do_key): Remove support for building v3 keys.
* g10/parse-packet.c (read_protected_v3_mpi): Remove.
(parse_key): Remove support for v3-keys. Add dedicated warnings for
v3-key packets.
* g10/keyid.c (hash_public_key): Remove v3-key support.
(keyid_from_pk): Ditto.
(fingerprint_from_pk): Ditto.
* g10/options.h (opt): Remove fields force_v3_sigs and force_v4_certs.
* g10/gpg.c (cmd_and_opt_values): Remove oForceV3Sigs, oNoForceV3Sigs,
oForceV4Certs, oNoForceV4Certs.
(opts): Turn --force-v3-sigs, --no-force-v3-sigs, --force-v4-certs,
--no-force-v4-certs int dummy options.
(main): Remove setting of the force_v3_sigs force_v4_certs flags.
* g10/revoke.c (gen_revoke, create_revocation): Always create v4 certs.
* g10/sign.c (hash_uid): Remove support for v3-signatures
(hash_sigversion_to_magic): Ditto.
(only_old_style): Remove this v3-key function.
(write_signature_packets): Remove support for creating v3-signatures.
(sign_file): Ditto.
(sign_symencrypt_file): Ditto.
(clearsign_file): Ditto. Remove code to emit no Hash armor line if
only v3-keys are used.
(make_keysig_packet): Remove arg SIGVERSION and force using
v4-signatures. Change all callers to not pass a value for this arg.
Remove all v3-key related code.
(update_keysig_packet): Remove v3-signature support.
* g10/keyedit.c (sign_uids): Always create v4-signatures.
* g10/textfilter.c (copy_clearsig_text): Remove arg pgp2mode and
change caller.
--
v3 keys are deprecated for about 15 years and due the severe
weaknesses of MD5 it does not make any sense to keep code around to
use these old and broken keys. Users who need to decrypt old messages
should use gpg 1.4 and best re-encrypt them to modern standards.
verification of old (i.e. PGP2) created signatures is thus also not
anymore possible but such signatures have no values anyway - MD5 is
just too broken.
We have also kept support for v3 signatures until now. With the
removal of support for v3 keys it is questionable whether it makes any
sense to keep support for v3-signatures. What we do now is to keep
support for verification of v3-signatures but we force the use of
v4-signatures. The latter makes the --pgp6 and --pgp7 switch a bit
obsolete because those PGP versions require v3-signatures for
messages. These versions of PGP are also really old and not anymore
maintained so they have not received any bug fixes and should not be
used anyway.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Added --enable-large-secmem option.
* g10/options.h: Add opt.flags.large_rsa.
* g10/gpg.c: Contingent on configure option: adjust secmem size,
add gpg --enable-large-rsa, bound to opt.flags.large_rsa.
* g10/keygen.c: Adjust max RSA size based on opt.flags.large_rsa
* doc/gpg.texi: Document --enable-large-rsa.
--
This is a cherry-pick of 534e2876ac from
STABLE-BRANCH-1-4 against master
Some older implementations built and used RSA keys up to 16Kib, but
the larger secret keys now fail when used by more recent GnuPG, due to
secure memory limitations.
Building with ./configure --enable-large-secmem will make gpg
capable of working with those secret keys, as well as permitting the
use of a new gpg option --enable-large-rsa, which let gpg generate RSA
keys up to 8Kib when used with --batch --gen-key.
Debian-bug-id: 739424
Minor edits by wk.
GnuPG-bug-id: 1732
* g10/gpg.c (oRFC1991, oPGP2): Remove
(opts): Remove --pgp2 and --rfc1991.
* g10/options.h (CO_PGP2, CO_RFC1991): Remove. Remove all users.
(RFC2440, PGP2): Remove. Remove all code only enabled by these
conditions.
* tests/openpgp/clearsig.test: Remove --rfc1991 test.
--
The use of PGP 2.c is considered insecure for quite some time
now (e.g. due to the use of MD5). Thus we remove all support for
_creating_ PGP 2 compatible messages.
