* g10/options.h (CO_DE_VS): New.
(GNUPG): Also allow CO_DE_VS.
* g10/gpg.c (oDE_VS): New.
(parse_compliance_option): Add "de-vs".
(set_compliance_option): Set "de-vs".
* g10/misc.c (compliance_option_string): Return a description string.
(compliance_failure): Ditto.
* g10/keygen.c (ask_algo): Take care of CO_DE_VS.
(get_keysize_range): Ditto.
(ask_curve): Add new field to CURVES and trun flags into bit flags.
Allow only Brainpool curves in CO_DE_VS mode.
--
As of now this compliance mode only restricts the set of algorithms
and curves which can be created.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (print_reported_error): New.
--
Often the user is only interested in a catch all error code like "not
found" but sometimes it is useful to also see the real reason. By
this function this can easily be achieved. Example:
err = search_for_key (keyid)
if (err)
{
log_info ("error locating key '%s': %s\n",
keyid, gpg_strerror (GPG_ERR_NOT_FOUND));
print_reported_error (err, GPG_ERR_NOT_FOUND);
}
results in
gpg: error locating key 'foobar': not found
gpg: (reported error: no keyring <keybox>)
where the second line is only printed in verbose mode and if ERR is
not GPG_ERR_NOT_FOUND.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (parse_def_secret_key): Change error message. Replace
log_debug by log_info.
* g10/gpg.c (check_user_ids): Make function static. Change error
messages.
(main): Change error messages.
* g10/revoke.c (gen_revoke): Ditto.
--
There are other smaller changes not described above.
This change tries to avoid new error messages so not to increase the
the number of translated strings or break too many existing
translations. It also tries to use existing strings and changes the
quoting to the most common style used in gpg.
Key specifications should in general use double quotes. Other values
should use single quotes. However. sometimes it is not easy to
distinguish between values given on the command line and key
specifications. According to old GNU coding standards diagnostics
should not start capitalized - whether this is a good idea is a
different thing but we used this rules for most strings. However,
strings which are used interactively should be properly capitalized
and end with a dot.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (zb32_encode): Move prototype to ...
* common/zb32.h: new. Include this for all callers of zb32_encode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/main.h: Add rejection_shown flag to each weakhash struct
* g10/misc.c (print_digest_algo_note, additional_weak_digest): Do not
treat MD5 separately; (print_digest_rejected_note): Use
weakhash.rejection_shown instead of static shown.
* g10/options.h (opt): Change from additional_weak_digests to
weak_digests.
* g10/sig-check.c: Do not treat MD5 separately.
* g10/gpg.c (main): Explicitly set MD5 as weak.
* g10/gpgv.c (main): Explicitly set MD5 as weak.
--
Previously, only one weak digest rejection message was shown, of
whichever was the first type encountered. This meant that if "gpg
--weak-digest SHA224" encountered both an MD5 digest and a SHA224
digest, it would only show the user that the MD5 digest was rejected.
In order to let the user know which algorithms were rejected, we
needed to move the "shown" flag into a per-weak-algorithm location.
Given this additional complication, it made no sense to continue to
treat MD5 specially, so it is added as a default weak algorithm in the
same opt.weak_digests data structure as any other.
Signed-Off-By: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/misc.c (print_md5_rejected_note): Rename to ..
(print_digest_rejected_note): this. Parameterize function to take an
enum gcry_md_algos.
* g10/sig-check.c: Use print_digest_rejected_note() when rejecting
signatures.
--
76afaed65e allowed extra --weak-digests,
but removed the one call to print_md5_rejected_note(). This replaces
and generalizes that warning.
Signed-Off-By: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/options.h: Add additional_weak_digests linked list to opts.
* g10/main.h: Declare weakhash linked list struct and
additional_weak_digest() function to insert newly-declared weak
digests into opts.
* g10/misc.c: (additional_weak_digest): New function.
(print_digest_algo_note): Check for deprecated digests; use proper
gcry_md_algos type.
* g10/sig-check.c: (do_check): Reject weak digests in addition to MD5.
* g10/gpg.c: Add --weak-digest option to gpg.
* doc/gpg.texi: Document gpg --weak-digest option.
* g10/gpgv.c: Add --weak-digest option to gpgv.
* doc/gpgv.texi: Document gpgv --weak-digest option.
--
gpg and gpgv treat signatures made over MD5 as unreliable, unless the
user supplies --allow-weak-digests to gpg. Signatures over any other
digest are considered acceptable.
Despite SHA-1 being a mandatory-to-implement digest algorithm in RFC
4880, the collision-resistance of SHA-1 is weaker than anyone would
like it to be.
Some operators of high-value targets that depend on OpenPGP signatures
may wish to require their signers to use a stronger digest algorithm
than SHA1, even if the OpenPGP ecosystem at large cannot deprecate
SHA1 entirely today.
This changeset adds a new "--weak-digest DIGEST" option for both gpg
and gpgv, which makes it straightforward for anyone to treat any
signature or certification made over the specified digest as
unreliable.
This option can be supplied multiple times if the operator wishes to
deprecate multiple digest algorithms, and will be ignored completely
if the operator supplies --allow-weak-digests (as before).
MD5 is still always considered weak, regardless of any further
--weak-digest options supplied.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Capitialized some comments, shorted a line in do_check, and changed
subject to name the option. -wk
* g10/parse-packet.c (set_packet_list_mode): Set mpi_print_mode.
* g10/misc.c (mpi_print): Do not print an extra leading zero.
--
This was in older versions possible using "--debug 4" but that was
disabled in 2.1 due to a conflict using this values also for
Libgcrypt. Now the values are dumped either with --debug 4 or using
--list-packets along with --verbose.
Because OpenPGP only uses unsigned integers an extra leading zero will
not be printed anymore.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (sign_file): Use log_printf instead of stderr.
* g10/tdbdump.c (export_ownertrust): Use estream fucntions.
(import_ownertrust): Ditto.
* g10/tdbio.c (tdbio_dump_record): Ditto. Change arg to estream_t.
--
Reported-by: Guilhem Moulin <guilhem@fripost.org>
Needed for unattended key edits with --status-fd, because since 2.1
status prompts are preceded by es_fflush (in cpr.c:do_get_from_fd)
not fflush(3), so the standard output may not be flushed before each
prompt. (Which breaks scripts using select(2) to multiplex between
the standard and status outputs.)
His patch only affected print_and_check_one_sig_colon() but there are
many more places where stdio and estream are mixed. This patch now
replaces most of them in g10/. At some places stdio is still used,
but that is local to a function and should not have side effects.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/host2net.h (buf16_to_ulong, buf16_to_uint): New.
(buf16_to_ushort, buf16_to_u16): New.
(buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New.
--
Commit 91b826a388 was not enough to
avoid all sign extension on shift problems. Hanno Böck found a case
with an invalid read due to this problem. To fix that once and for
all almost all uses of "<< 24" and "<< 8" are changed by this patch to
use an inline function from host2net.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.h (g10_errstr): Remove macro and change all occurrences by
gpg_strerror.
(G10ERR_): Remove all macros and change all occurrences by their
GPG_ERR_ counterparts.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (pct_expando): Reorder conditions for clarity.
* g10/sign.c (write_signature_packets): Fix notation data creation.
--
Also re-added the check for signature version > 3.
Reported-by: MFPA
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Pass option names to obsolete_option without
double dash.
* g10/misc.c (obsolete_option, obsolete_scdaemon_option): Print double
dash only for command line options.
* g10/gpg.c: Add config options that should belong in scdaemon.conf
* g10/main.h, g10/misc.c (obsolete_scdaemon_option): New.
--
In gpg2, the following options are only relevant for scdaemon:
reader-port
ctapi-driver
pcsc-driver
disable-ccid
but in gpg1, they are options for gpg itself.
Some users of gpg1 might have these options in their
~/.gnupg/gpg.conf, which causes gpg2 to fail hard if it reads that
config file.
gpg2 should not fail hard, though giving a warning (and suggesting a
move to scdaemon.conf) seems OK.
This patch does *not* reintroduce any documentation for these options
in gpg.texi, even to indicate that they are "dummy" options, since
scdaemon.texi contains the appropriate documentation.
Debian-bug-id: 762844
- Program names factored out from obsolete_scdaemon_option to make
reuse without new translations easier. -wk
* g10/sig-check.c (do_check): Move some code to ...
* g10/misc.c (print_md5_rejected_note): new function.
* g10/mainproc.c (proc_tree, proc_plaintext): Enable MD5 workaround
only if option --allow-weak-digest-algos is used.
* g10/gpg.c (oRFC1991, oPGP2): Remove
(opts): Remove --pgp2 and --rfc1991.
* g10/options.h (CO_PGP2, CO_RFC1991): Remove. Remove all users.
(RFC2440, PGP2): Remove. Remove all code only enabled by these
conditions.
* tests/openpgp/clearsig.test: Remove --rfc1991 test.
--
The use of PGP 2.c is considered insecure for quite some time
now (e.g. due to the use of MD5). Thus we remove all support for
_creating_ PGP 2 compatible messages.
* g10/gpg.c (aQuickKeygen): New.
* g10/misc.c (is_valid_user_id): New stub.
* g10/keygen.c (quickgen_set_para): New.
(quick_generate_keypair): New.
--
Note that the validation of the specified user id has not yet been
implemented.
* g10/keyid.c (hash_public_key): Take care of NULL keys.
* g10/misc.c (pubkey_nbits): Ditto.
--
This problem was mainly due to our ECC code while checking for opaque
MPIs with the curve name.
* g10/photoid.c (show_photos): Set namehash.
* g10/misc.c (pct_expando): Add "%U" expando.
--
This makes is possible to extract all photos ids from a key to
different files.
* acinclude.m4 (GNUPG_GPG_DISABLE_ALGO): New.
* configure.ac: Add --enable-gpg-* options to disable non MUS
algorithms.
* g10/misc.c (map_cipher_openpgp_to_gcry): Implement these options.
(openpgp_pk_test_algo2): Ditto.
(map_md_openpgp_to_gcry): Ditto.
(openpgp_cipher_test_algo, openpgp_md_test_algo): Simplify.
--
We have a similar feature in GnuPG-1. Although we don't shrink the
size of the gpg binary by disabling algorithms (they are implemented
in Libgcrypt), this feature may still be useful for inerop testing.
* g10/misc.c (openpgp_pk_algo_name): Return a different string for
each ECC algorithm.
* g10/gpg.c (build_list_pk_test_algo): New wrapper to cope with the
different algo type enums.
(build_list_pk_algo_name): Ditto.
(build_list_cipher_test_algo): Ditto.
(build_list_cipher_algo_name): Ditto.
(build_list_md_test_algo): Ditto.
(build_list_md_algo_name): Ditto.
(my_strusage): Use them.
(list_config): Ditto. Add "pubkeyname".
(build_list): Add letter==1 hack.
* g10/misc.c (print_pubkey_algo_note): Use enum typedef for the arg.
(print_cipher_algo_note): Ditto.
(print_digest_algo_note): Ditto.
(map_md_openpgp_to_gcry): New.
(openpgp_md_test_algo): Rewrite.
(openpgp_md_algo_name): Rewrite to do without Libgcrypt.
* g10/cpr.c (write_status_begin_signing): Remove hardwired list of
algo ranges.
* g10/misc.c (map_cipher_openpgp_to_gcry): Use explicit mapping and
use enums for the arg and return value.
(map_cipher_gcry_to_openpgp): Ditto.
(openpgp_cipher_blocklen): Use constant macros.
(openpgp_cipher_test_algo): Use mapping function and prepare to
disable algorithms.
(openpgp_cipher_algo_name): Do not use Libgcrypt.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Replace
CGRY_CIPHER_* by CIPHER_ALGO_*.
* common/openpgpdefs.h (cipher_algo_t): Remove unused
CIPHER_ALGO_DUMMY.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sexputil.c (get_pk_algo_from_canon_sexp): Change to return a
string.
* g10/keygen.c (check_keygrip): Adjust for change.
* sm/certreqgen-ui.c (check_keygrip): Likewise.
* agent/pksign.c (do_encode_dsa): Remove bogus map_pk_openpgp_to_gcry.
* g10/misc.c (map_pk_openpgp_to_gcry): Remove.
(openpgp_pk_test_algo): Change to a wrapper for openpgp_pk_test_algo2.
(openpgp_pk_test_algo2): Rewrite.
(openpgp_pk_algo_usage, pubkey_nbits): Add support for EdDSA.
(openpgp_pk_algo_name): Rewrite to remove need for gcry calls.
(pubkey_get_npkey, pubkey_get_nskey): Ditto.
(pubkey_get_nsig, pubkey_get_nenc): Ditto.
* g10/keygen.c(do_create_from_keygrip): Support EdDSA.
(common_gen, gen_ecc, ask_keysize, generate_keypair): Ditto.
* g10/build-packet.c (do_key): Ditto.
* g10/export.c (transfer_format_to_openpgp): Ditto.
* g10/getkey.c (cache_public_key): Ditto.
* g10/import.c (transfer_secret_keys): Ditto.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Ditto.
* g10/mainproc.c (proc_pubkey_enc): Ditto.
* g10/parse-packet.c (parse_key): Ditto,
* g10/sign.c (hash_for, sign_file, make_keysig_packet): Ditto.
* g10/keyserver.c (print_keyrec): Use openpgp_pk_algo_name.
* g10/pkglue.c (pk_verify, pk_encrypt, pk_check_secret_key): Use only
OpenPGP algo ids and support EdDSA.
* g10/pubkey-enc.c (get_it): Use only OpenPGP algo ids.
* g10/seskey.c (encode_md_value): Ditto.
--
This patch separates Libgcrypt and OpenPGP public key algorithms ids
and in most cases completely removes the Libgcrypt ones. This is
useful because for Libgcrypt we specify the algorithm in the
S-expressions and the public key ids are not anymore needed.
This patch also adds some support for PUBKEY_ALGO_EDDSA which will
eventually be used instead of merging EdDSA with ECDSA. As of now an
experimental algorithm id is used but the plan is to write an I-D so
that we can get a new id from the IETF. Note that EdDSA (Ed25519)
does not yet work and that more changes are required.
The ECC support is still broken right now. Needs to be fixed.
Signed-off-by: Werner Koch <wk@gnupg.org>
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
* g10/keygen.c (keygen_set_std_prefs): Include IDEA only in PGP2
compatibility mode.
* g10/misc.c (idea_cipher_warn): Remove. Also remove all callers.
* common/status.h (STATUS_RSA_OR_IDEA): Remove. Do not emit this
status anymore.
--
To keep the number of actually used algorithms low, we want to support
IDEA only in a basically read-only way (unless --pgp2 is used during
key generation). It does not make sense to suggest the use of this
old 64 bit blocksize algorithm. However, there is old data available
where it might be helpful to have IDEA available.
* g10/misc.c (pubkey_get_npkey, pubkey_get_nskey)
(pubkey_get_nsig, pubkey_get_nenc): Map all RSA algo ids to
GCRY_PK_RSA.
--
The problem is that Libgcrypt has no more support for the alternate
RSA ids and thus if asking for the number of parameters, they will
return zero. Now, this leads to packing the key parameters into an
opaque MPI but because the algorithm id is actually known to GPG, it
assumes valid RSA parameters.
An example key with RSA_S is 0x5434509D.
Changed order of some conditional to make to put the special case into
the true branch. Indentation changes. Minor other changes to make the
ECC code more similar to the rest of our code.
It builds but many sefltests still fail. Need to fix that before
using it with an ECDH enabled libgcrypt.
[/]
2011-01-21 Werner Koch <wk@g10code.com>
* configure.ac: Need Libgcrypt 1.4.6 due to AESWRAP.
(HAVE_GCRY_PK_ECDH): Add new test.
[agent/]
2011-01-21 Werner Koch <wk@g10code.com>
* cvt-openpgp.c (GCRY_PK_ECDH) [!HAVE_GCRY_PK_ECDH]: New.
[include/]
2011-01-21 Werner Koch <wk@g10code.com>
* cipher.h (GCRY_PK_USAGE_CERT): Remove compatibility macros
because we now require libgcrypt 1.4.6.
(GCRY_PK_ECDH): Add replacement.
The following works:
gpg2 --gen-key (ECC)
gpg2 --list-keys
gpg2 --list-packets ~/.gnupg/pubring.gpg
gpg2 --list-packets <private key from http://sites.google.com/site/brainhub/pgpecckeys>
ECDH doesn't work yet as the code must be re-written to adjust for gpg-agent refactoring.
