* scd/app-common.h (struct app_ctx_s): Rename field to
periodical_check_needed.
* scd/scdaemon.c (update_usb): Rename from update_fdset_for_usb.
Don't use libusb_get_pollfds any more.
(scd_kick_the_loop): New.
(need_tick): Follow the rename.
(handle_connections): No libusb event handling here.
* scd/app.c (app_new_register): Follow the change of rename.
(select_application, scd_update_reader_status_file): Likewise.
* scd/ccid-driver.c (ccid_usb_thread_is_alive): New.
(intr_cb): Call scd_kick_the_loop.
(ccid_usb_thread): New. Thread to invoke INTERRUPT callback.
(ccid_open_usb_reader): Add thread invocation.
(ccid_require_get_status): Remove
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP.
(do_close_reader): Carefully handle handle->transfer.
(get_escaped_usb_string): Insert npth_unprotect/npth_protect.
(do_close_reader, bulk_out, bulk_in, abort_cmd, ccid_slot_status)
(ccid_transceive, ccid_transceive_secure): Likewise.
--
It found that libusb_get_pollfds is not supported on Windows.
Besides, it's a bit difficult to use for the select loop.
Thus, we use the thread named ccid_usb_thread, instead.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c(struct reader_table_s): Add require_get_status.
(apdu_connect): Change return value meaning. Call apdu_reset here.
* scd/app.c (app_new_register): Add require_get_status.
(select_application): Use the return value of apdu_connect.
(scd_update_reader_status_file): Call update_fdset_for_usb with
checking all_have_intr_endp.
(app_list_start, app_list_finish): Remove.
* scd/ccid-driver.c (struct ccid_driver_s): Add transfer.
(intr_cb): Don't call libusb_transfer in this callback.
(ccid_require_get_status): New.
(do_close_reader): Call libusb_transfer here.
* scd/scdaemon.c (update_fdset_for_usb): Remove the first argument.
--
With Gnuk Token, it works fine as expected. With Gemalto reader,
intr_cb is not called when card is removed. So, the macro
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP is not defined yet.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (update_fdset_for_usb): Wake up the select(2).
(handle_connections): Use a kind of "self-pipe" technique.
--
Use pipe to wake up select(2). If UNIX-only, signal could be used. For
portability, "self-pipe" is better, here. Setup for non-blocking for
pipe fds are not needed, because speed of USB device insertion is
limited by human physical interaction; No one can do hundreds of
device insertion/removal-s per second.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/logging.c (do_logv): Remove extra parentheses in comparison.
* dirmngr/dns-stuff.c (resolve_addr_libdns): Init RES so that
dns_res_close is given a defined value in the error case.
* dirmngr/http.c (cookie_read, cookie_write) [HTTP_USE_NTBTLS]: Fix
format string char.
* dirmngr/ks-engine-hkp.c (ks_hkp_help): Remove duplicate "const".
* dirmngr/ks-engine-http.c (ks_http_help): Ditto.
* dirmngr/ks-engine-kdns.c (ks_kdns_help): Ditto.
* dirmngr/ks-engine-ldap.c (ks_ldap_help): Ditto.
* scd/app-p15.c (send_keypairinfo, do_getattr): Fix format string
char.
* tools/gpgconf-comp.c (gpg_agent_runtime_change): Init PID for the
error case.
(scdaemon_runtime_change): Ditto.
(dirmngr_runtime_change): Ditto.
* tools/gpgconf.c (query_swdb): Init VALUE_SIZE_UL.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_get_serial_and_stamp): Remove.
(app_get_serialno): New.
(app_write_learn_status): Use send_status_direct.
(app_getattr): Use app_get_serialno for SERIALNO and
send with send_status_direct.
* scd/app-openpgp.c (do_getattr): Likewise.
* scd/command.c (cmd_serialno): Don't send TIMESTAMP of 0.
(cmd_learn): Likewise. Don't inquire with TIMESTAMP of 0.
--
In the SERIALNO protocol, timestamp used to be considered, but had never
used at all. In the new implementation, removed card/token is always
detected and connection becomes invalid, no timestamp is required any
more. Examined scute and poldi as well for this protocol change.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (select_application): Add SERIALNO_BIN and SERIALNO_BIN_LEN
arguments. Return matched APP with a serial number when specified.
* scd/command.c (open_card): Modify for the implicit open only.
(open_card_with_request): New for explicit open and support match with a
serial number.
(cmd_serialno): Support --demand option.
(cmd_learn, cmd_readcert, cmd_readkey, cmd_pksign, cmd_pkauth)
(cmd_pkdecrypt, cmd_getattr, cmd_setattr, cmd_writecert, cmd_writekey)
(cmd_genkey, cmd_random, cmd_passwd, cmd_checkpin, cmd_apdu): Follow
the change of open_card.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (apdu_dev_list_finish): Don't call ccid_dev_scan_finish
with no table.
(apdu_open_reader): Only increment when it's zero.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (new_reader_slot): Lock is now in apdu_dev_list_start.
(close_pcsc_reader_direct, close_ccid_reader): RDRNAME is handled...
(apdu_close_reader): ... by this function now.
(apdu_prepare_exit): Likewise.
(open_ccid_reader): Open with dev_list.
(apdu_dev_list_start, apdu_dev_list_finish): New.
(apdu_open_one_reader): New.
(apdu_open_reader): Support multiple readers.
* scd/app.c (select_application): With SCAN, opening all readers
available, and register as new APP.
(app_write_learn_status): app->ref_count == 0 is valid for APP which is
not yet used.
(app_list_start, app_list_finish): New.
* scd/ccid-driver.c (struct ccid_driver_s): Remove RID and BCD_DEVICE.
Add BAI.
(parse_ccid_descriptor): BCD_DEVICE is now on the arguments.
(ccid_dev_scan, ccid_dev_scan_finish): New.
(ccid_get_BAI, ccid_compare_BAI, ccid_open_usb_reader): New.
(ccid_open_reader): Support multiple readers.
(ccid_set_progress_cb, ccid_close_reader): No RID any more.
--
With this change, multiple readers/tokens are supported by the internal
CCID driver of GnuPG. Until the changes of upper layers (scdaemon,
gpg-agent, and gpg front end), only a single reader is used, though.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (scan_or_find_usb_device): Don't scan for
configuration but use active configuration. Support alt_setting.
(scan_or_find_devices): Support alt_setting.
(ccid_open_reader): Support alt_setting.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (reader_table_lock, apdu_init): New.
(new_reader_slot): Serialize by reader_table_lock.
* scd/app.c (lock_app, unlock_app, app_new_register): Fix error code
usage.
(initialize_module_command): Call apdu_init.
* scd/scdaemon.c (main): Handle error for initialize_module_command.
--
This is a long standing bug. There are two different things; The
serialization of allocating a new SLOT, and the serialization of using
the SLOT. The latter was implemented in new_reader_slot by lock_slot.
However, the former was not done. Thus, there was a possible race where
a same SLOT is allocated to multiple threads.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (lock_app): Rename from lock_reader and use internal field
of APP.
(unlock_app): Likewise.
(app_dump_state): Use APP.
(application_notify_card_reset): Remove.
(check_conflict): Change API for APP, instead of SLOT.
(check_application_conflict): Likewise.
(release_application_internal): New.
(app_reset): New.
(app_new_register): New.
(select_application): Change API for APP, instead of SLOT.
(deallocate_app, release_application): Modify for manage link.
(report_change): New.
(scd_update_reader_status_file): Moved from command.c and
use APP list, instead of VREADER.
(initialize_module_command): Moved from command.c.
* scd/command.c (TEST_CARD_REMOVAL): Remove.
(IS_LOCKED): Simplify.
(vreader_table): Remove.
(vreader_slot, update_card_removed): Remove.
(do_reset): Call app_reset.
(get_current_reader): Remove.
(open_card): Add SCAN arg.
(cmd_serialno): No retry, since retry is done in lower layer in apdu.c.
No do_reset, since it is done in lower layer.
Add clearing card_removed flag.
(cmd_disconnect): Call apdu_disconnect.
(send_client_notifications): Modify for APP.
(update_reader_status_file): Remove.
--
APP is the abstraction of the card application. For management of
cards, it is better to focus on the APP instead of the physical reader.
This change makes support of multiple card/token easier.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (struct reader_table_s): Remove any_status, last_status,
status, and change_counter field.
(new_reader_slot, dump_reader_status, ct_activate_card, open_ct_reader)
(connect_pcsc_card, open_pcsc_reader_direct, open_pcsc_reader_wrapped)
(open_ccid_reader, apdu_reset): Follow the change.
(ct_dump_reader_status): Remove.
(apdu_get_status_internal, apdu_get_status): Remove CHANGED arg.
(apdu_connect): Follow the change.
* scd/command.c (struct vreader_s): Remove reset_failed, any, and
changed field.
(cmd_getinfo, update_reader_status_file): Follow the change.
--
In the past, scdaemon monitors card insertion (as well as removal), so
the code has been complicated, and there has been duplication in two
layers. Now, it only monitors card removal, it's now simplified.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (scan_or_find_usb_device): Fix return value.
Support device with multiple CCID interfaces. Fix the case with
READERNO. Support partial string match of "reader-port" like PC/SC
driver.
--
I don't know any device with multiple CCID interfaces, though.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-common.h (app_readcert, app_readkey, app_setattr, app_sign,
app_auth, app_decipher, app_get_challenge, app_check_pin): Add CTRL as
the second argument.
* scd/app.c: Supply CTRL to lock_reader calls.
* scd/command.c (cmd_readcert, cmd_readkey, cmd_pksign, cmd_auth,
cmd_pkdecrypt, cmd_setattr, cmd_random, cmd_checkpin): Follow the
change.
--
APP is an abstraction of the "card application". Most methods of APP
should have CTRL argument to report back progress to the session. This
change fixes FIXMEs for missing CTRL.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/openpgp-oid.c (openpgp_is_curve_supported): Add optional arg
R_ALGO and change all callers.
* common/util.h (GPG_ERR_UNKNOWN_FLAG): New error code.
* g10/options.h (struct opt): Add field DEF_NEW_KEY_ALGO.
* g10/gpg.c (oDefaultNewKeyAlgo): New enum.
(opts): New option "--default-new-key-algo".
(main): Set the option.
* g10/keygen.c: Remove DEFAULT_STD_ FUTURE_STD_ constants and replace
them by ...
(DEFAULT_STD_KEY_PARAM, FUTURE_STD_KEY_PARAM): new string constants.
(get_keysize_range): Remove arg R_DEF and return that value instead.
Change all callers.
(gen_rsa): Use get_keysize_range instead of the removed
DEFAULT_STD_KEYSIZE.
(parse_key_parameter_part): New function.
(parse_key_parameter_string): New function.
(quick_generate_keypair): Refactor using parse_key_parameter_string.
(generate_keypair): Ditto.
(parse_algo_usage_expire): Ditto.
--
This new option is intended to be used in the forthcoming
--set-profile command of gpgconf. It allows to provide a gpg
configuration with custom defaults for a new key using the simple
commands which use the default algorithm set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (struct app_local_s): Remove max_cmd_data and
max_rsp_data fields as Extended Capabilities bits are different.
(get_cached_data) Use extcap.max_certlen_3.
(get_one_do): Don't use exmode=1.
(determine_rsa_response): New.
(get_public_key, do_genkey): Call determine_rsa_response.
(do_sign): Use keyattr[0].rsa.n_bits / 8, instead of max_rsp_data.
(do_auth): Use keyattr[2].rsa.n_bits / 8, instead of max_rsp_data.
(do_decipher): Likewise with Use keyattr[1].rsa.n_bits / 8.
(show_caps): Remove max_cmd_data and max_rsp_data.
(app_select_openpgp): Likewise.
--
OpenPGP card V3 had introduced incompatible change in Extended
Capabilities bits. We can work around by this change by not
using those bits.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (send_le): Fix the size, adding two for status
bytes to Le.
--
This is long standing bug. So far, Le was not exact value.
Since forthcoming change will introduce exact value of expected length
of response data, this change is needed.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (pcsc_vendor_specific_init): Only check vender ID.
--
Some other products by Cherry works with pinpad, although it only works
for smaller keys (RSA 1024). TPDU support is good for larger keys.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* dirmngr/dirmngr.c (main): Before calling setsid do not close the
standard fds but connect them to /dev/null.
* scd/scdaemon.c (main): Ditto. Noet that the old test for a log
stream was even reverted.
--
Note that this was fixed for gpg-agent 10 years ago on 2006-11-09.
Signed-off-by: Werner Koch <wk@gnupg.org>
There were several different variant spellings of "passphrase". This
should fix them all for all English text.
I did notice that po/it.po contains multiple instances of
"passhprase", which also looks suspect to me, but i do not know
Italian, so i did not try to correct it.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* scd/app-openpgp.c (do_decipher): When it's x-coordinate only, add the
prefix 0x41.
--
Card should return fixed size bytes, either in format of
(04 || X || Y) or (X, x-coordinate only).
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (send_key_attr): Use curve instead of OID.
(ecdh_params): New.
(ecc_read_pubkey): Use ecdh_params. Use curve name.
(ecc_writekey): Likewise.
(ecc_curve): Rename from ecc_oid.
(parse_algorithm_attribute): Use ecc_curve.
* g10/call-agent.c (learn_status_cb): Use openpgp_is_curve_supported to
intern the curve name string.
* g10/card-util.c (card_status): Conver curve name to alias for print.
--
Now, sdcaemon answer for KEY-ATTR is in the canonical curve name
instead of the alias. Since it is used of key generation for
card encryption key with backup, it should be canonical name.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keygen.c (generate_keypair): For card key generation, fill
parameters by KEY-ATTR.
* scd/app-openpgp.c (ecc_read_pubkey): OID should be freed at last,
after its reference by OIDBUF is finished.
(ecc_writekey): Likewise.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (rsa_read_pubkey, ecc_read_pubkey): New.
(read_public_key): New.
(get_public_key, do_genkey): Use read_public_key.
--
With this change, since GENKEY updates the public key (pk[keyno].key) in
APP, READKEY will be possible after the command even for the old
card (version <= 0x0100).
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (get_public_key): Fix a message.
(change_keyattr_from_string, ecc_writekey): Call mpi_release sooner.
(do_genkey): Add ECC support.
--
In OpenPGP card specification 3.0, ECC is introduced. So far, do_genkey
only supported RSA. Since KDF spec. is needed to calculate the
fingerprint, it is hard coded in app-openpgp.c. But it's defined by
OpenPGP ECC (RFC-6637), and card does nothing with KDF in fact.
Co-authored-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/iso7816.c (do_generate_keypair): Use const char * for DATA.
(iso7816_generate_keypair, iso7816_read_public_key): Likewise.
* scd/app-openpgp.c (get_public_key): Follow the change.
(do_genkey): Ditto. Use ERR instead of RC. Use u32 for CREATED_AT.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (build_ecc_privkey_template): Size can be greater
than 128 when it comes with public key for curve of larger field.
--
Reported-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/gpg-agent.c (thread_init_once, initialize_modules): New.
(main): Make sure no daemonizing-fork call after npth_init, and no npth
calls before npth_init, with care of npth calls by assuan hooks.
* dirmngr/dirmngr.c (thread_init): New.
(main): Make sure npth_init must not be called before daemonizing fork.
* scd/scdaemon.c (main): Likewise.
--
It is simply the best for nPth not to allow the daemonizing fork after
npth_init, because semantics and implementations of forked child process
in a threaded application is a difficult corner case.
GnuPG-bug-id: 1779
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (ECC_FLAG_PUBKEY): New.
(send_key_attr, get_public_key, ecc_writekey, do_auth, do_decipher)
(parse_algorithm_attribute): Check ECC_FLAG_DJB_TWEAK.
(build_ecc_privkey_template): Add ECC_Q and ECC_Q_LEN.
Support offering public key when ECC_FLAG_PUBKEY sets.
(ecc_writekey): Supply ECC_Q and ECC_Q_LEN.
(parse_algorithm_attribute): Parse pubkey-required byte.
--
OpenPGPcard protocol specification version 3.2 supports algorithm
attributes for ECC key which specifies public key data is required for
"keytocard" command. This change supports the feature.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/asshelp.c (my_log_monitor): New var.
(my_libassuan_log_handler): Run that monitor.
(setup_libassuan_logging): Add arg to set a log monitor and change all
callers.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (update_card_removed): Call apdu_close_reader here.
--
This is update of the commit 8fe8105576
It is better apdu_close_reader is called in update_card_removed.
The commit 1598a44764 introduced a
regression, it doesn't close the reader after removal of the card, while
the code before the commit call apdu_close_reader in do_reset.
So, this fix.
GnuPG-bug-id: 2449
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/preset-passphrase.c, agent/protect-tool.c, dirmngr/dirmngr.c
* dirmngr/t-http.c, g10/gpg.c, g10/gpgv.c, g13/g13-syshelp.c
* g13/g13.c, kbx/kbxutil.c, scd/scdaemon.c, sm/gpgsm.c
* tests/gpgscm/main.c, tools/gpg-check-pattern.c
* tools/gpg-connect-agent.c, tools/gpgconf.c, tools/gpgtar.c
* tools/symcryptrun.c: Invoke log_set_prefix() with
human-readable labels.
--
Some invocations of log_set_prefix() were done with raw numeric values
instead of values that humans can understand. Use symbolic
representations instead of numeric for better readability.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/init.c (init_common_subsystems): Initialize libgcrypt.
* dirmngr/Makefile.am (dirmngr_ldap): Link with libgcrypt.
--
Most other modules already call gcry_check_version() after
init_common_subsystems() so may as well move initialization of libgcrypt
to here. Also fixes a warning in the system log from gpgconf --homedir.
Signed-off-by: Ben Kibbey <bjk@luxsci.net>
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
with clearer text.
In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something. When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.
These changes should make the language a bit clearer.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* scd/app.c (application_notify_card_reset): Add message for debug.
*scd/command.c (update_card_removed): Call release_application and set
SLOT -1 here.
(struct server_local_s): Remove app_ctx_marked_for_release.
(do_reset): Don't mark release but call release_application here.
(open_card): Remove app_ctx_marked_for_release handling.
(update_reader_status_file): Don't set SLOT here, so that it can be
released the APP by application_notify_card_reset in
update_card_removed.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/command.c (do_reset, cmd_restart): Reset app_ctx before calling
release_application.
--
Thanks to Ben Warren for the report.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* (parse_ccid_descriptor): nonnull_nad = 0 for all GEMPC device.
--
We can't use the driver for 08E6:3438, while it works well under PC/SC
service. I found that the library of ccid always uses the node
address = ZERO for all transactions. So, we extend the same handling
for not only GEMPC_CT30, but also for all its devices.
Debian-bug-id: 814584
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (opts): Add --homedir.
--
Without that entry the homedir setting won't work.
GnuPG-bug-id: 2386
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (create_server_socket): Call chmod before listen.
* scd/scdaemon.c (create_server_socket): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
--
This is just in case of a improperly set umask. Note that a connect
requires a write permissions.
* agent/gpg-agent.c (remove_socket): Do not remove the enclosing
directory.
* scd/scdaemon.c (cleanup): Ditto.
--
The socket directory is now below /run or at ~/.gnupg. Thus we should
not try to remove the directory of the socket. The auto-removal was
introduced at a time we used a temporary directory for the sockets.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (LIBUSB_CPPFLAGS): New.
* scd/Makefile.am (AM_CPPFLAGS): Add LIBUSB_CPPFLAGS.
* scd/ccid-driver.c: Use libusb 1.0 API.
--
Changes are straightforward, not use any new features.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (do_genkey): Strip leading zeros for fingerprint
computation.
--
This bug is difficult to reproduce because the probability is 1/256,
and key generation takes long time. The regression was introduced
when we add the support for ECC.
GnuPG-bug-id: 2150
* scd/apdu.c (pcsc_error_to_sw): map PCSC_E_NO_SERVICE and
PCSC_E_SERVICE_STOPPED to the internal SW_HOST_NO_READER error code.
--
Signed-off-by: Daniel Hoffend <dh@dotlan.net>
GnuPG-bug-id: 2167
In Windows 8 (and later), PC/SC service only runs when reader/token is
plugged in. After its removal, it returns PCSC_E_NO_SERVICE error.
This error should be handled as no reader. This comment is by gniibe.
* scd/app.c (lock_table): Remove LAST_APP field.
(lock_reader, app_dump_state, application_notify_card_reset)
(release_application): Follow the change.
(check_conflict): New.
(check_application_conflict): Lock the slot and call check_conflict.
(select_application): Call check_conflict and not use LAST_APP.
--
We don't need LAST_APP field but just keep the application context by
APP field. Since we have a reference counter, it is possible if we
can deallocate or not.
* scd/app-openpgp.c (do_decipher): Handle trancated cipher text.
Also fix xfree bug introduced.
--
In old format with no prefix, cipher text can be trancated when it
is parsed as MPI. Recover the value adding back zeros.
Fixes-commit: 11b2691edd
* scd/app-openpgp.c (do_decipher): Check 0x02 also for 16+1 byte long
INDATA.
(do_decipher): Fix integer arithmetic in void pointer.
(do_decipher): Add missing memcpy.
--
I have not tested this fix but it is obvious.
Fixes-commit: 11b2691edd
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (apdu_close_reader): Call CLOSE_READER method even if we
got an error from apdu_disconnect.
* scd/app-common.h (no_reuse): Remove.
* scd/app.c (application_notify_card_reset): Deallocate APP here.
(select_application, release_application): Don't use NO_REUSE.
--
Reproducible scenario: Invoke gpg --card-edit session from a terminal.
Invoke another gpg --card-edit session from another. Remove a token.
Insert a token again. Type RET on both terminals. One of terminal
answers "Conflicting usage".
Perhaps, having NO_REUSE field was to avoid race conditions. Now,
APP can be safely deallocated by application_notify_card_reset.
Thanks to the2nd.
* scd/app-openpgp.c (get_public_key): Improve error handling.
--
Found using the Clang Static Analyzer.
Signed-off-by: Justus Winter <justus@g10code.com>
* scd/ccid-driver.c (bulk_out): Use LIBUSB_ERRNO_NO_SUCH_DEVICE.
--
With libusb-compat library, the error is different than original
libusb. (The libusb-compat library is used by Fedora.)
* scd/ccid-driver.c (CCID_CMD_TIMEOUT): New.
(ccid_transceive_apdu_level, ccid_transceive): Use.
--
It is reported that key generation causes timeout with OpenPGPcard
v2.1. Ideally, timeout value could be determined at run-time by
examining card's ATR. Compile-time fixed value is OK for internal
CCID driver.
* scd/app-openpgp.c (change_rsa_keyattr): New.
(change_keyattr_from_string): Use change_rsa_keyattr.
(rsa_writekey): Call change_rsa_keyattr when different size.
(ecc_writekey): Try to change key attribute.
* agent/cvt-openpgp.c (get_keygrip): Handle Curve25519.
(convert_secret_key, convert_transfer_key): Ditto.
* common/openpgp-oid.c (oidtable): Add Curve25519.
(oid_crv25519, openpgp_oid_is_crv25519): New.
* common/util.h (openpgp_oid_is_crv25519): New.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Handle the case
with Montgomery curve which uses x-only coordinate.
* g10/keygen.c (gen_ecc): Handle Curve25519.
(ask_curve): Change the API and second arg is to return subkey algo.
(generate_keypair, generate_subkeypair): Follow chage of ask_curve.
* g10/keyid.c (keygrip_from_pk): Handle Curve25519.
* g10/pkglue.c (pk_encrypt): Handle Curve25519.
* g10/pubkey-enc.c (get_it): Handle the case with Montgomery curve.
* scd/app-openpgp.c (ECC_FLAG_DJB_TWEAK): New.
(send_key_attr): Work with general ECC, Ed25519, and Curve25519.
(get_public_key): Likewise.
(ecc_writekey): Handle flag_djb_tweak.
--
When libgcrypt has Curve25519, GnuPG now supports Curve25519.
* common/openpgp-oid.c (openpgp_oid_to_curve): Add CANON argument.
* common/util.h: Update.
* g10/import.c (transfer_secret_keys): Follow the change.
* g10/keyid.c (pubkey_string): Likewise.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Likewise.
* parse-packet.c (parse_key): Likewise.
* scd/app-openpgp.c (send_key_attr, get_public_key): Likewise.
--
Change the function so that caller can select canonical name of curve
or name for printing. Suggested by wk.
* scd/app-openpgp.c (send_key_attr): Send KEYNO.
(get_public_key): Fix SEXP composing.
(ecc_writekey): Fix OID length calculation.
(ecc_oid): Prepend the length before query.
(parse_algorithm_attribute): Handle the case the curve is not available.
* common/util.h: Provide replacement for GPGRT_ATTR_ macros when using
libgpg-error < 1.20.
* common/mischelp.h: Ditto.
* common/types.h: Ditto.
--
Given that libgpg-error is a dependency of all GnuPG related libraries
it is better to define such macros at only one place instead of having
similar macros at a lot of places. For now we need repalcement
macros, though.
* g10/call-agent.h (struct agent_card_info_s): Add curve field.
* g10/call-agent.c (learn_status_cb): Use curve name.
* g10/card-util.c (card_status): Show pubkey name.
* scd/app-openpgp.c (struct app_local_s): Record OID and flags.
(store_fpr): Use ALGO instead of key type.
(send_key_attr): Use curve name instead of OID.
(get_public_key): Clean up by OID to curve name.
(ecc_writekey): Support any curves in libgcrypt.
(do_genkey, do_auth, ): Follow the change.
(ecc_oid): New.
(parse_algorithm_attribute): Show OID here.
* g10/card-util.c (do_change_keysize): Put "rsa".
* scd/app-openpgp.c (change_keyattr, change_keyattr_from_string):
Change the command format.
(rsa_writekey): Check key type.
(do_writekey): Remove "ecdh" and "ecdsa" support which was available
in experimental libgcrypt before 1.6.0.
