* scd/iso7816.h (struct pininfo_s): Rename from iso7816_pininfo_s.
Change meaning of MODE.
(pininfo_t): Rename from iso7816_pininfo_t.
* scd/sc-copykeys.c: Include "iso7816.h".
* scd/scdaemon.c, scd/command.c: Likewise.
* scd/ccid-driver.c: Include "scdaemon.h" and "iso7816.h".
(ccid_transceive_secure): Follow the change of PININFO_T.
* scd/app.c: Include "apdu.h" after "iso7816.h".
* scd/iso7816.c (iso7816_check_keypad, iso7816_verify_kp)
(iso7816_change_reference_data_kp): Follow the change of API.
* scd/apdu.c (struct reader_table_s): Change API of CHECK_KEYPAD,
KEYPAD_VERIFY, KEYPAD_MODIFY to have arg of PININFO_T.
(check_pcsc_keypad, check_ccid_keypad): Likewise.
(apdu_check_keypad, apdu_keypad_verify, apdu_keypad_modify): Likewise.
(pcsc_keypad_verify, pcsc_keypad_modify, ct_send_apdu)
(pcsc_send_apdu_direct, pcsc_send_apdu_wrapped, pcsc_send_apdu)
(send_apdu_ccid, ccid_keypad_operation, my_rapdu_send_apdu, send_apdu)
(send_le): Follow the change of API.
* scd/apdu.h (apdu_check_keypad, apdu_keypad_verify)
(apdu_keypad_modify): Change the API.
* scd/app-dinsig.c, scd/app-nks.c, scd/app-openpgp.c: Follow the
change.
* scd/ccid-driver.c (struct ccid_driver_s): Add auto_voltage,
auto_param, and auto_pps.
(parse_ccid_descriptor): Set auto_voltage, auto_param, and auto_pps.
Support non-autoconf readers.
(update_param_by_atr): New.
(ccid_get_atr): Use 5V for PowerOn when auto_voltage is not supported.
Use 0x10 when nonnull_nad for SetParameters.
Call update_param_by_atr for parsing ATR, and use param for
SetParameters.
Send PPS if reader requires it and card is negotiable.
When bNadValue in the return values of SetParameters == 0,
clear handle->nonnull_nad flag.
--
This change is to support more card readers by the internal driver.
Tested with 08e6:3478 Gemplus PinPad Smart Card Reader.
* scd/apdu.c (pcsc_no_service): Remove.
(open_pcsc_reader_direct, open_pcsc_reader_wrapped): Remove
pcsc_no_service support.
(apdu_open_reader): Remove R_NO_SERVICE.
* scd/apdu.h (apdu_open_reader): Remove R_NO_SERVICE.
* scd/command.c (reader_disabled): Remove.
(get_current_reader): Follow the change of R_NO_SERVICE.
(open_card, cmd_serialno, scd_command_handler): Remove reader_disabled
support.
* scd/sc-copykeys.c (main): Follow the change of R_NO_SERVICE.
--
Daemon should handle all possible cases. Even if such a difficult
case like reader_disabled, it should not exit.
* scd/command.c (update_reader_status_file): Don't call
get_current_reader.
--
This fix has a impact that the insertion of a card reader will not be
detected upon the insertion, but will be deferred until user tries to
access his card.
* scd/command.c (MAXLEN_SETDATA): New.
(cmd_setdata): Add option --append.
* agent/call-scd.c (agent_card_pkdecrypt): Use new option for long
data.
* scd/app-openpgp.c (struct app_local_s): Add field manufacturer.
(app_select_openpgp): Store manufacturer.
(do_decipher): Print a note for broken cards.
--
Please note that I was not able to run a full test because I only have
broken cards (S/N < 346) available.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
When the KILLSCD command had been sent a race condition would occur
causing PID -1 getting killed, which on Linux seems to terminate all
applications for the current user.
GnuPG requires that options are given before other arguments. This
can sometimes be confusing. We now print a warning if we found an
argument looking alike a long option without being preceded by the
stop option. This is bug#1343.
* common/argparse.h (ARGPARSE_FLAG_STOP_SEEN): New.
* common/argparse.c (arg_parse): Set new flag.
* g10/gpg.c (main): Print the warning.
* agent/gpg-agent.c (main): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
* g13/g13.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
For the shared code parts it is cumbersome to pass an error sourse
variable to each function. Its value is always a constant for a given
binary and thus a global variable makes things a lot easier than the
former macro stuff.
* common/init.c (default_errsource): New global var.
(init_common_subsystems): Rename to _init_common_subsystems. Set
DEFAULT_ERRSOURCE.
* common/init.h: Assert value of GPG_ERR_SOURCE_DEFAULT.
(init_common_subsystems): New macro.
* common/util.h (default_errsource): Add declaration.
* kbx/keybox-defs.h: Add some GPG_ERR_SOURCE_DEFAULT trickery.
* agent/gpg-agent.c (get_agent_ssh_socket_name): Use
INVALID_HANDLE_VALUE instead of 0.
(handle_signal) [!HAVE_W32_SYSTEM]: Don't define.
(handle_connections): Port Windows code to NPTH.
* dirmngr/dirmngr.c (handle_connections): Port Windows code to NPTH.
* g13/g13.c (handle_connections): Port Windows code to NPTH.
* scd/scdaemon.c (handle_connections): Port Windows code to NPTH.
* scd/apdu.c (ccid_keypad_operation): Rename from ccid_keypad_verify.
(open_ccid_reader): Use ccid_keypad_operation for verify and modify.
* scd/ccid-driver.c (VENDOR_VASCO, VASCO_920): New.
(ccid_transceive_apdu_level): Permit sending packet where
apdulen <= 289. Support receiving packets in a chain.
(ccid_transceive_secure): Maximum is 15 for VASCO DIGIPASS 920.
Support keypad_modify method such as CHANGE_REFERENCE_DATA: 0x24.
* common/dotlock.c (use_hardlinks_p, dotlock_take_unix): Check return
value of link().
* g13/g13.c: Make sure err is initialized.
* scd/scdaemon.c (main) [!USE_GCRY_THREAD_CBS]: Do not define ERR.
* agent/gpg-agent.c, dirmngr/dirmngr.c, g13/g13.c, scd/scdaemon.c
(USE_GCRY_THREAD_CBS): New macro, defined if
GCRY_THREAD_OPTION_VERSION is 0.
(fixed_gcry_pth_init) [!USE_GCRY_THREAD_CBS]: Don't define.
(main) [!USE_GCRY_THREAD_CBS]: Do not install thread callbacks.
* scd/apdu.c (apdu_connect): Do not test for zero atrlen.
--
When gpg-agent prompts for insertion of a card this error would be
returned.
Co-authored-by: Ben Kibbey <bjk@luxsci.net>
* scd/app.c (select_application): Reorder application tests.
--
Although the DINSIG application is available on most German cards, it
is in reality not used. Thus showing the Geldkarte application is
more desirable for a good user experience.
* scd/command.c (update_card_removed): Do no act on an invalid VRDR.
(do_reset): Ignore apdu_reset error codes for no and inactive card.
Close the reader before setting the slot to -1.
(update_reader_status_file): Notify the application before closing the
reader.
--
With this change the scd now works as it did in the past. In
particular there is no more endless loop trying to open the reader by
the update_reader_status_file ticker function. That bug basically
blocked all card operations until the scdaemon was killed.
* scd/scdaemon.c (oDebugAssuanLogCats): New.
(opts): Add option --debug-assuan-log-cats.
(main): Implement option.
* common/asshelp.c (set_libassuan_log_cats): New.
--
The old way of setting the logging categories with an environment
variable is awkward if sdaemon is spawned from a running gpg-agent.
The vreader table makes the code more clear by explicitly talking
about APDU slots and reader indices. It also accommodates for future
extensions.
* scd/scdaemon.h (server_control_s): Remove READER_SLOT.
* scd/scdaemon.c (scd_init_default_ctrl): Do not init READER_SLOT.
* scd/app.c (check_application_conflict): Add arg SLOT.
* scd/command.c (slot_status_s): Rename to vreader_s.
(server_local_s): Add field VREADER_IDX as replacement for
the READER_SLOT in server_control_s. Change all users.
(slot_table): Rename to vreader_table. Change all users.
(vreader_slot): New.
(do_reset, cmd_apdu): Map vreader to apdu slot.
(get_reader_slot): Rename to get_current_reader. Return -1 on error.
(open_card): Map vreader toapdu slot. Pass slot to
check_application_conflict.
(scd_command_handler): Init VREADER_IDX.
(update_reader_status_file): Reset SLOT field on error.
* scd/apdu.c (apdu_connect): Return status codes for no card available
and inactive card.
* scd/command.c (TEST_CARD_REMOVAL): Also test for GPG_ERR_CARD_RESET.
(open_card): Map apdu_connect status to GPG_ERR_CARD_RESET.
* apdu.c (pcsc_keypad_verify): Have dummy Lc field with value 0.
(pcsc_keypad_modify): Likewise.
(pcsc_keypad_modify): It's only for ISO7816_CHANGE_REFERENCE_DATA.
bConfirmPIN value is determined by the parameter p0.
* app-openpgp.c (do_change_pin): The flag use_keypad should be 0 when
reset_mode is on, or resetcode is on. use_keypad only makes sense for
iso7816_change_reference_data_kp.
* iso7816.h (iso7816_put_data_kp): Remove.
(iso7816_reset_retry_counter_kp): Remove.
(iso7816_reset_retry_counter_with_rc_kp): Remove.
(iso7816_change_reference_data_kp): Add an argument: IS_EXCHANGE.
* iso7816.c (iso7816_put_data_kp): Remove.
(iso7816_reset_retry_counter_kp): Remove.
(iso7816_reset_retry_counter_with_rc_kp): Remove.
(iso7816_change_reference_data_kp): Add an argument: IS_EXCHANGE.
* scripts/gitlog-to-changelog: New script. Taken from gnulib.
* scripts/git-log-fix: New file.
* scripts/git-log-footer: New file.
* doc/HACKING: Describe the ChangeLog policy
* ChangeLog: New file.
* Makefile.am (EXTRA_DIST): Add new files.
(gen-ChangeLog): New.
(dist-hook): Run gen-ChangeLog.
Rename all ChangeLog files to ChangeLog-2011.
Before this change, it is layered like following:
iso7816_verify
iso7816_verify_kp
apdu_send_simple, apdu_send_simple_kp
...
After this change, it will be layered like:
iso7816_verify iso7816_verify_kp
apdu_send_simple apdu_keypad_verify
...
and apdu_send_simple_kp will be deprecated.
For PC/SC API, we use:
SCardControl API to compose CCID PC_to_RDR_Secure message
SCardTransmit API to compose CCID PC_to_RDR_XfrBlock message
Considering the support of PC/SC, we have nothing to share between _kp
version of iso7816_* and no _kp version.
This patch implementes a chunk mode to pass the key parameters from
scdaemon to gpg. This allows to pass arbitrary long key paremeters;
it is used for keys larger than 3072 bit.
Note: the card key generation in gpg is currently broken. The keys
are generated but it is not possible to create the self-signature
because at that time the gpg-agent does not yet know about the new
keys and thus can't divert the sign request to the card. We either
need to run the learn command right after calling agent_scd_genkey or
implement a way to sign using the currently inserted card. Another
option would be to get rid of agent_scd_genkey and implement the
feature directly in agent_genkey.
This is not a part of pin pad support series of mine.
As I found the bug while I am preparing the patches, I report this.
As CCID protocol is little endian, wLangId of US English = 0x0409
is represented as two bytes of 0x09 then 0x04.
It is really confusing that the code like following is floating
around:
pin_verify -> wLangId = HOST_TO_CCID_16(0x0904);
But, it is 0x0409 (not 0x0904). It is defined in the documentation:
http://www.usb.org/developers/docs/USB_LANGIDs.pdf
and origin of this table is Microsoft. We can see it at:
http://msdn.microsoft.com/en-us/library/bb165625%28VS.80%29.aspx
Yes, it would be better not to hard-code 0x0409. It would be better
to try current locale of the user, or to use the first entry of string
descriptor. I don't have time to implement such a thing...
