* g10/import.c (chk_self_sigs): Set the NODE_GOOD_SELFSIG flag when we
encounter a valid revocation signature. This allows import of subkey
revocation signatures, even in the absence of a corresponding subkey
binding signature.
--
This fixes the remaining test in import-incomplete.scm.
GnuPG-Bug-id: 4393
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic import-merge-without-userid
Gbp-Pq: Name gpg-accept-subkeys-with-a-good-revocation-but-no-self-sig.patch
* g10/import.c (import_one): Accept an incoming OpenPGP certificate that
has no user id, as long as we already have a local variant of the cert
that matches the primary key.
--
This fixes two of the three broken tests in import-incomplete.scm.
GnuPG-Bug-id: 4393
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic import-merge-without-userid
Gbp-Pq: Name gpg-allow-import-of-previously-known-keys-even-without-UI.patch
This commit adds a test case that does the following, in order:
- Import of a primary key plus user id
- Check that import of a subkey works, without a user id present in the
imported key
- Check that import of a subkey revocation works, without a user id or
subkey binding signature present in the imported key
- Check that import of a primary key revocation works, without a user id
present in the imported key
--
Note that this test currently fails. The following changesets will
fix gpg so that the tests pass.
GnuPG-Bug-id: 4393
Signed-Off-By: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic import-merge-without-userid
Gbp-Pq: Name tests-add-test-cases-for-import-without-uid.patch
* g10/keygen.c (keygen_set_std_prefs): prefer SHA-512
and SHA-384 by default.
--
In 8ede3ae29a39641a2f98ad9a4cf61ea99085a892, upstream changed the
defaults for --default-preference-list to advertise a preference for
SHA-512, without touching --personal-digest-preferences. This makes
the same change for --personal-digest-preferences, since every modern
OpenPGP library supports them all.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic update-defaults
Gbp-Pq: Name gpg-Prefer-SHA-512-and-SHA-384-in-personal-digest.patch
* g10/main.h (DEFAULT_DIGEST_ALGO): Use SHA512 instead of SHA256 in
--gnupg mode (leave strict RFC and PGP modes alone).
* configure.ac: Do not allow disabling sha512.
* g10/misc.c (map_md_openpgp_to_gcry): Always support SHA512.
--
SHA512 is more performant on most 64-bit platforms than SHA256, and
offers a better security margin. It is also widely implemented.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic update-defaults
Gbp-Pq: Name gpg-Default-to-SHA-512-for-all-signature-types-on-RS.patch
* g10/main.h (DEFAULT_CIPHER_ALGO): Prefer AES256 by default.
--
It's 2017, and pretty much everyone has AES-256 available. Symmetric
crypto is also rarely the bottleneck (asymmetric crypto is much more
expensive). AES-256 provides some level of protection against
large-scale decryption efforts, and longer key lengths provide a hedge
against unforseen cryptanalysis.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
(cherry picked from commit 73ff075204df09db5248170a049f06498cdbb7aa)
Gbp-Pq: Topic from-master
Gbp-Pq: Name gpg-default-to-AES-256.patch
* agent/command.c (hlp_genkey): update help text to suggest the use of
3072 bits.
* doc/wks.texi: Make example match default generation.
* g10/keygen.c (DEFAULT_STD_KEY_PARAM): update to
rsa3072/cert,sign+rsa3072/encr, and fix neighboring comment,
(gen_rsa, get_keysize_range): update default from 2048 to 3072).
* g10/keyid.c (pubkey_string): update comment so that first example
is the default 3072-bit RSA.
--
3072-bit RSA is widely considered to be 128-bit-equivalent security.
This is a sensible default in 2017.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
(cherry picked from commit 909fbca19678e6e36968607e8a2348381da39d8c)
Gbp-Pq: Topic from-master
Gbp-Pq: Name gpg-default-to-3072-bit-RSA-keys.patch
* agent/gpg-agent.c (handle_connections): When inotify is working, we
do not need to schedule a timer to evaluate whether we control our own
socket or not.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic gpg-agent-idling
Gbp-Pq: Name agent-Avoid-scheduled-checks-on-socket-when-inotify-.patch
* agent/gpg-agent.c (need_tick): Evaluate whether the short-phase
handle_tick() is needed.
(handle_connections): On each cycle of the select loop, adjust whether
we should call handle_tick() or not.
(start_connection_thread_ssh, do_start_connection_thread): Signal the
main loop when the child terminates.
* agent/call-scd.c (start_scd): Call interrupt_main_thread_loop() once
the scdaemon thread context has started up.
--
With this change, an idle gpg-agent that has no scdaemon running only
wakes up once a minute (to check_own_socket).
Thanks to Ian Jackson and NIIBE Yutaka who helped me improve some of
the blocking and corner cases.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic gpg-agent-idling
Gbp-Pq: Name agent-Avoid-tight-timer-tick-when-possible.patch
* agent/gpg-agent.c (interrupt_main_thread_loop): New function on
non-windows platforms, allows other threads to interrupt the main loop
if there's something that the main loop might be interested in.
--
For example, the main loop might be interested in changes in program
state that affect the timers it expects to see.
I don't know how to do this on Windows platforms, but i welcome any
proposed improvements.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic gpg-agent-idling
Gbp-Pq: Name agent-Allow-threads-to-interrupt-main-select-loop-wi.patch
agent/gpg-agent.c (handle_tick): Remove intermittent call to
check_own_socket.
(tv_is_set): Add inline helper function for readability.
(handle_connections) Create general table of pending scheduled
timeouts.
--
handle_tick() does fine-grained, rapid activity. check_own_socket()
is supposed to happen at a different interval.
Mixing the two of them makes it a requirement that one interval be a
multiple of the other, which isn't ideal if there are different delay
strategies that we might want in the future.
Creating an extensible regular timer framework in handle_connections
should make it possible to have any number of cadenced timers fire
regularly, without requiring that they happen in cadences related to
each other.
It should also make it possible to dynamically change the cadence of
any regularly-scheduled timeout.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic gpg-agent-idling
Gbp-Pq: Name agent-Create-framework-of-scheduled-timers.patch
* dirmngr/dirmngr.c (housekeeping_thread): Avoid automatically
checking upstream's software database. In Debian, software updates
should be handled by the distro mechanism, and additional upstream
checks only confuse the user.
* doc/dirmngr.texi: document that --allow-version-check does nothing.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic dirmngr-idling
Gbp-Pq: Name dirmngr-Avoid-automatically-checking-upstream-swdb.patch
* dirmngr/ks-engine-hkp.c (host_is_alive): New function. Test whether
host is alive and resurrects it if it has been dead long enough.
(select_random_host, map_host, ks_hkp_mark_host): Use host_is_alive
instead of testing hostinfo_t->dead directly.
(ks_hkp_housekeeping): Remove function, no longer needed.
* dirmngr/dirmngr.c (housekeeping_thread): Remove call to
ks_hkp_housekeeping.
--
Rather than resurrecting hosts upon scheduled resurrection times, test
whether hosts should be resurrected as they're inspected for being
dead. This removes the need for explicit housekeeping, and makes host
resurrections happen "just in time", rather than being clustered on
HOUSEKEEPING_INTERVAL seconds.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic dirmngr-idling
Gbp-Pq: Name dirmngr-Avoid-need-for-hkp-housekeeping.patch
* dirmngr/ks-engine-hkp.c (select_random_host): Use atomic pass
through the host table instead of risking out-of-bounds write.
--
Multiple threads may write to hosttable[x]->dead while
select_random_host() is running. For example, a housekeeping thread
might clear the ->dead bit on some entries, or another connection to
dirmngr might manually mark a host as alive.
If one or more hosts are resurrected between the two loops over a
given table in select_random_host(), then the allocation of tbl might
not be large enough, resulting in a write past the end of tbl on the
second loop.
This change collapses the two loops into a single loop to avoid this
discrepancy: each host's "dead" bit is now only checked once.
As Werner points out, this isn't currently strictly necessary, since
npth will not switch threads unless a blocking system call is made,
and no blocking system call is made in these two loops.
However, in a subsequent change in this series, we will call a
function in this loop, and that function may sometimes write(2), or
call other functions, which may themselves block. Keeping this as a
single-pass loop avoids the need to keep track of what might block and
what might not.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic dirmngr-idling
Gbp-Pq: Name dirmngr-hkp-Avoid-potential-race-condition-when-some.patch
This avoids needing to setgid gpg-agent. It probably doesn't defend
against all possible attacks, but it defends against one specific (and
easy) one. If there are other protections we should do them too.
This will make it slightly harder to debug the agent because the
normal user won't be able to attach gdb to it directly while it runs.
The remaining options for debugging are:
* launch the agent from gdb directly
* connect gdb to a running agent as the superuser
Upstream bug: https://dev.gnupg.org/T1211
Gbp-Pq: Topic block-ptrace-on-secret-daemons
Gbp-Pq: Name Avoid-simple-memory-dumps-via-ptrace.patch
* g10/import.c (read_block): Make sure KEYID is availabale also on a
pending packet.
--
Reported-by: Phil Pennock
Fixes-commit: adb120e663fc5e78f714976c6e42ae233c1990b0
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (check_sig_and_print): Print a hint on how to make
use of the preferred keyserver. Remove keyserver lookup just by the
keyid. Try a WKD lookup before a keyserver lookup.
--
The use of the the keyid for lookups does not make much sense anymore
since for quite some time we do have the fingerprint as part of the
signature.
GnuPG-bug-id: 4595
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 96bf8f477805bae58cfb77af8ceba418ff8aaad9)
* tools/wks-receive.c (decrypt_data): Change limit.
--
The former limit ~1MiB of was used during development.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit b0e8724b102535c27a8c973ec038d340858a8eb8)
* dirmngr/ks-engine-hkp.c (send_request): Reinitialize HTTP session when
following a HTTP redirection.
--
inspired by patch from Damien Goutte-Gattat <dgouttegattat@incenp.org>
GnuPG-Bug_id: 4566
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/gpg.c (main): Change default.
--
Due to the DoS attack on the keyeservers we do not anymore default to
import key signatures. That makes the keyserver unsuable for getting
keys for the WoT but it still allows to retriev keys - even if that
takes long to download the large keyblocks.
To revert to the old behavior add
keyserver-optiions no-self-sigs-only,no-import-clean
to gpg.conf.
GnuPG-bug-id: 4607
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 23c978640812d123eaffd4108744bdfcf48f7c93)
* g10/getkey.c (get_pubkey_byname): Add special traeatment for default
and skipped-local.
--
This change avoids error message like
gpg: error retrieving 'foo@example.org' via None: No public key
A 'None' mechanism is something internal.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 91a6ba32347a21c9029728eec96b8ff80f944629)
* g10/gpg.c (aLocateExtKeys): New.
(opts): Add --locate-external-keys.
(main): Implement that.
* g10/getkey.c (get_pubkey_byname): Implement GET_PUBKEY_NO_LOCAL.
(get_best_pubkey_byname): Add arg 'mode' and pass on to
get_pubkey_byname. Change callers.
* g10/keylist.c (public_key_list): Add arg 'no_local'.
(locate_one): Ditto. Pass on to get_best_pubkey_byname.
--
This new command is a shortcut for
--auto-key-locate nodefault,clear,wkd,... --locate-key
and uses the default or configured AKL list but does so without local.
See also
GnuPG-bug-id: 4599
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit d00c8024e58822e0623b3fad99248ce68a8b7725)
* g10/keydb.h (enum get_pubkey_modes): New.
* g10/getkey.c (get_pubkey_byname): Repalce no_akl by a mode arg and
change all callers.
--
This change prepares the implementation of GET_PUBKEY_NO_LOCAL.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 9980f81da765f88a65604ab083563bf15ccdb425)
* dirmngr/ks-engine-hkp.c (SEND_REQUEST_EXTRA_RETRIES): New.
(handle_send_request_error): Use it for 503 and 504.
(ks_hkp_search, ks_hkp_get, ks_hkp_put): Pass a new var for
extra_tries.
--
This is a pretty stupid fix but one which works without much risk of
regressions. We could have used the existing TRIES but in that case
the fallback to other host would have been too limited. With the used
value we can have several fallbacks to other hosts. Note that the
TRIES is still cumulative and not per host.
GnuPG-bug-id: 4600
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 8b113bb148f273524682252233b3c65954e1419e)
* dirmngr/http.c (same_host_p): Consider certain subdomains to be the
same.
--
GnuPG-bug-id: 4603
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 37f0c55c7be3fc4912237f2bc72466aef6f8aa36)
* g10/import.c (import_one): Rename to ...
(import_one_real): this. Do not print and update stats on keyring
write errors.
(import_one): New. Add fallback code.
--
GnuPG-bug-id: 4591
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 3a403ab04eeb45f12b34f9d9c421dac93eaf2160)
* g10/options.h (IMPORT_SELF_SIGS_ONLY): New.
* g10/import.c (parse_import_options): Add option "self-sigs-only".
(read_block): Handle that option.
--
This option is intended to help against importing keys with many bogus
key-signatures. It has obvious drawbacks and is not a bullet-proof
solution because a self-signature can also be faked and would be
detected only later.
GnuPG-bug-id: 4591
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 15a425a1dfe60bd976b17671aa8e3d9aed12e1c0)
* g10/import.c: Change arg 'with_meta' to 'options'. Change callers.
--
This chnage allows to pass more options to read_block.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_component_kill): Reverse the order.
--
Cherry-picked from master commit:
7c877f942a344e7778005840ed7f3e20ace12f4a
The order matters in a corner case; On a busy machine, there was a
race condition between gpg-agent's running KILLAGENT command and its
accepting incoming request on the socket. If a request by
gpg-connect-agent was accepted, it resulted an error by sudden
shutdown. This change of the order can remove such a race.
Here, we know backend=0 is none.
GnuPG-bug-id: 4577
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_getinfo): Return GPG_ERR_FALSE as boolean False.
* g13/server.c (cmd_getinfo): Ditto.
* sm/server.c (cmd_getinfo): Ditto.
--
GPG_ERR_FALSE was introduced with libgpg-error 1.21 and we now require
a later version for gnupg 2. Thus we can switch to this more
descriptive code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/ocsp.c (do_ocsp_request): Remove arg md. Add args r_sigval,
r_produced_at, and r_md. Get the hash algo from the signature and
create the context here.
(check_signature): Allow any hash algo. Print a diagnostic if the
signature does not verify.
--
GnuPG-bug-id: 3966
Signed-off-by: Werner Koch <wk@gnupg.org>
