* agent/gpg-agent.c (oEnableExtendedKeyFormat): Re-introduce.
(parse_rereadable_options): Handle it in a special way.
* agent/protect.c (agent_protect): Be safe and set use_ocb only to 1
or 0.
* tools/gpgconf-comp.c: Add --enable-extended-key-format again.
--
This is required for backward compatible with profiles.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oDisableExtendedKeyFormat, oNoop): New.
(oEnableExtendedKeyFormat): Remove.
(opts): Make --enable-extended-key-format a dummy option. Add
disable-extended-key-format.
(parse_rereadable_options): Implement oDisableExtendedKeyFormat.
--
Extended key format is supported since vesion 2.1.12 which should have
long been replaced by a newer version inh all installations. Thus for
2.3 we will make use of the extended-key-format by default.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_component_t): Move this enum to ...
* tools/gpgconf.h: here.
* tools/gpgconf.c (oShowSocket): New.
(opts): Add new option.
(main): Implement new option.
--
This is a convenience options for software which directly connects to
gpg-agent and thus needs to new the socket. By using --show-socket
along with --launch that software can also autostart the agent or the
dirmngr. Without this two calls to gpgconf would be required.
Actually the same behaviour can be achieved by running
gpg-connect-agent to query the running gpg-agent's socket via GETINFO.
The gpg-connect also makes sure that the agent is started. This is
not anymore suggested because gpgconf shall in future be used for all
such things.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (get_config_filename): Allow UNC paths.
--
The homedir of GnuPG on Windows can be on a network share
e.g. if %APPDATA% is redirected to a network share. The
file API calls work and GnuPG itself works nicely
with such paths so gpgconf should work with them, too.
GnuPG-Bug-Id: T3818
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* tools/gpgconf.c (oStatusFD): New const.
(opts): New option --status-fd.
(statusfp): New var.
(set_status_fd): New.
(gpgconf_write_status): New.
(gpgconf_failure): New.
(main): Set status fd and replace exit by gpgconf_failure.
* tools/gpgconf-comp.c: Repalce exit by gpgconf_failure.
(gc_process_gpgconf_conf): Print a few warning status messages.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (main): Allow setting of the default compliance.
* tools/gpgconf-comp.c (gc_options_gpgsm): Add "compliance".
--
This is required so that we can use this option in in gpgconf.conf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (retrieve_options_from_program): Add arg
only_installed.
(gc_component_retrieve_options): Use this if we want to process all
components.
--
Note that this also also ignores them in --with-defaults. This is
useful for systems which come without scdaemon.
GnuPG-bug-id: 3313
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (gpgconf_list): Announce "auto-key-retrieve".
(main): Simplify setting of KEYSERVER_AUTO_KEY_RETRIEVE.
* tools/gpgconf-comp.c: Make "no-auto-key-retrieve" invisible. Make
"auto-key-retrieve" an expert option.
--
This basically reverts 9bb13a0e819334681caca38c9074bd7bfc04e45e
because --no-auto-key-retrieve is again the default. Note that we
allow both options for the sake of profiles.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_options_gpg): Add max-cert-depth,
completes-needed, and marginals-needed options.
* g10/gpg.c (gpgconf_list): Likewise.
--
Some tests to come for the PGP trust model will need to manipulate
these parameters.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* doc/gpg.texi: Document new option.
* g10/call-dirmngr.c (create_context): Fail if option is given.
* g10/gpg.c (cmd_and_opt_values): New value.
(opts): New option.
(gpgconf_list): Add new option.
(main): Handle new option.
* g10/options.h (struct opt): New field 'disable_dirmngr'.
* tools/gpgconf-comp.c (gc_options_gpg): New option.
GnuPG-bug-id: 3334
Signed-off-by: Justus Winter <justus@g10code.com>
* tools/gpgconf-comp.c (gc_options_gpg): Re-add "auto-key_retrieve".
--
Although this option is invisible, it might be in use by gpgconf
profiles. We don't want to break them.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (gpgconf_list): Print no-auto-key-retrieve instead of
auto-key-retrieve.
* tools/gpgconf-comp.c (gc_options_gpg): Replace auto-key-retrieve by
no-auto-key-retrieve and chnage level from invisible to advanced.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (main): Move oSSHFingerprintDigest to ...
(parse_rereadable_options): here.
(opts): Change its description.
(main) <aGPGConfList>: Include this option.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Add option at expert
level.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (retrieve_options_from_program): Check ERRNO
before printing a warning.
--
It is common that a conf files does not exist - thus we should not
print a warning.
GnuPG-bug-id: 2944
BTW: The error messages in gpgconf should be reworked to match those
of the other components.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (retrieve_options_from_file): Use a
gpgrt_stream_t for 'list_file'. Adapt accordingly.
(copy_file): Likewise for 'src' and 'dst'.
(change_options_file): Likewise for 'src_file' and 'dest_file'.
(change_options_program): Likewise for 'src_file' and 'dest_file'.
(gc_process_gpgconf_conf): Likewise for 'config'.
--
Werner asked me to make gpgconf use the platform abstractions that
were introduced after gpgconf's inception.
Signed-off-by: Justus Winter <justus@g10code.com>
* tools/gpgconf-comp.c (gc_component_change_options): Use
'gnupg_rename_file'. Also, block signals across all renames in an
attempt to make the whole process atomic.
--
Werner asked me to make gpgconf use the platform abstractions that
were introduced after gpgconf's inception.
Signed-off-by: Justus Winter <justus@g10code.com>
* tools/gpgconf-comp.c (change_options_file): Add comments explaining
the functions parameters.
(change_options_program): Likewise.
--
From reading those two functions it is not clear why we write the new
configuration to the source file, and read the current configuration
from the destination file. The identifiers are named for the benefit
of the callee.
Note that identifiers that require that much explanation are poorly
chosen.
Signed-off-by: Justus Winter <justus@g10code.com>
* tools/gpgconf-comp.c (gp_component_change_options): Improve error
handling when reading from stdin.
--
Previously, errors encountered while reading the configuration changes
were ignored.
Signed-off-by: Justus Winter <justus@g10code.com>
* common/logging.c (do_logv): Remove extra parentheses in comparison.
* dirmngr/dns-stuff.c (resolve_addr_libdns): Init RES so that
dns_res_close is given a defined value in the error case.
* dirmngr/http.c (cookie_read, cookie_write) [HTTP_USE_NTBTLS]: Fix
format string char.
* dirmngr/ks-engine-hkp.c (ks_hkp_help): Remove duplicate "const".
* dirmngr/ks-engine-http.c (ks_http_help): Ditto.
* dirmngr/ks-engine-kdns.c (ks_kdns_help): Ditto.
* dirmngr/ks-engine-ldap.c (ks_ldap_help): Ditto.
* scd/app-p15.c (send_keypairinfo, do_getattr): Fix format string
char.
* tools/gpgconf-comp.c (gpg_agent_runtime_change): Init PID for the
error case.
(scdaemon_runtime_change): Ditto.
(dirmngr_runtime_change): Ditto.
* tools/gpgconf.c (query_swdb): Init VALUE_SIZE_UL.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dns-stuff.c (DEFAULT_TIMEOUT): New.
(opt_timeout): New var.
(set_dns_timeout): New.
(libdns_res_open): Set the default timeout.
(libdns_res_wait): Use configurable timeout.
(resolve_name_libdns): Ditto.
* dirmngr/dirmngr.c (oResolverTimeout): New const.
(opts): New option --resolver-timeout.
(parse_rereadable_options): Set that option.
(main) <aGPGConfList>: Add --nameserver and --resolver-timeout.
* tools/gpgconf-comp.c (gc_options_dirmngr): Add --resolver-timeout
and --nameserver.
* dirmngr/http.c (connect_server): Fix yesterday introduced bug in
error diagnostic.
--
This timeout is a pretty crude thing because libdns has a few other
internal timeouts as well.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (aApplyProfile): New.
(opts): New command --apply-profile.
(main): Implement that command.
* tools/gpgconf-comp.c (option_check_validity): Add arg VERBATIM.
(change_options_program): Ditto.
(change_one_value): Ditto.
(gc_component_change_options): Ditto.
(gc_apply_profile): New.
--
Here is an example for a profile
--8<---------------cut here---------------start------------->8---
# foo.prf - Sample profile
[gpg]
compliance de-vs
default-new-key-algo brainpoolP256r1+brainpoolP256r1
[gpgsm]
enable-crl-checks
[gpg-agent]
default-cache-ttl 900
max-cache-ttl [] 3600
no-allow-mark-trusted
no-allow-external-cache
enforce-passphrase-constraints
min-passphrase-len 9
min-passphrase-nonalpha 0
[dirmngr]
keyserver hkp://keys.gnupg.net
allow-ocsp
--8<---------------cut here---------------end--------------->8---
Note that flags inside of brackets are allowed after the option name.
The only defined flag for now is "[default]". In case the value
starts with a bracket, it is possible to insert "[]" as a nop-flag.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (struct opt): Add field allow_version_check.
* dirmngr/dirmngr.c (oAllowVersionCheck): New.
(opts): Add --allow-version-check.
(network_activity_seen): New variable.
(parse_rereadable_options): Set opt.allow_version_check.
(main) <aGPGConfList>: Do not anymore set the no change flag for
Windows. Add allow-version-check.
(netactivity_action): Set network_activity_seen.
(housekeeping_thread): Call dirmngr_load_swdb.
* tools/gpgconf-comp.c (gc_options_dirmngr): Add allow-version-check.
Make "use-tor" available at Basic level.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gpg_agent_runtime_change,
scdaemon_runtime_change, dirmngr_runtime_change): Provide the homedir
arguments by --homedir when it's not default.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
with clearer text.
In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something. When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.
These changes should make the language a bit clearer.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/exechelp-posix.c (do_exec): Add arg 'except' and pass to
close_all_fds.
(gnupg_spawn_process): Add arg 'except'. Change callers to pass NULL
for it.
* common/exechelp-w32.c (gnupg_spawn_process): Add dummy arg 'except'.
* common/exechelp-w32ce.c (gnupg_spawn_process): Ditto.
* common/exectool.c (copy_buffer_do_copy): Allow NULL for SINK.
(gnupg_exec_tool_stream): Add arg 'inextra'. Change callers to pass
NULL for it. Allow NULL for OUTPUT.
--
This hack is a first step to allow calling gpg for verification of
signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/exechelp-posix.c (my_error_from_syserror, my_error): New.
Use them instead of gpg_error and gpg_error_from_syserror.
(create_pipe_and_estream): Remove arg ERRSOURCE and fix use of
OUTBOUND which has a wrong name. Adjust callers.
(gnupg_spawn_process): Remove arg ERRSOURCE and replace by use of
DEFAULT_ERRSOURCE.
* common/exechelp-w32.c (gnupg_spawn_process): Ditto.
* common/exechelp-w32ce.c (gnupg_spawn_process): Ditto.
* common/exectool.c (gnupg_exec_tool_stream): Do not pass
GPG_ERROR_FROM_SYSERROR.
* tools/gpgconf-comp.c (gc_component_check_options): Ditto.
(retrieve_options_from_program): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oNoAllowLoopbackPinentry): New.
(opts): Add --no-allow-loopback-pinentry. Hide
description of --allow-loopback-pinentry.
(parse_rereadable_options): Set opt.allow_loopback_pinentry by
default.
(main): Replace allow-loopback-pinentry by no-allow-loopback-pinentry
in the gpgconf list.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Ditto.
--
Given that a user can anyway change that options in the gpg-agent.conf
file and that gpg needs to be invoked with --pinentry-mode=loopback
the former default does not make much sense - in that option is useful
at all. There was a discussion of this topic on gnupg-devel in April
without a clear result. So we try this new default and just in case
real problems are found for the majority of installations, we can
revert that. The new default is also aligned with GnuPG's policy to
make its use easier and only require users with very high security
standards to tweak certain options (those users have anyway modeled
their threat model and configured their software according to this).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_refresh): Change return type to
gpg_error_t. Use gpg_dirmngr_ks_list to print the name of the
keyserver to use.
(keyserver_search): Do not print the "no keyserver" error
message. The same error is anyway returned from dirmngr.
* g10/call-dirmngr.c (ks_status_parm_s): Add field "keyword".
(ks_status_cb): Handle other status keywords.
(gpg_dirmngr_ks_list): New.
* tools/gpgconf-comp.c (gc_options_gpg): Deprecate "keyserver".
(gc_options_dirmngr): Add "Keyserver" group and "keyserver".
--
Along with the corresponding dirmngr change this option allows to
configure the keyserver only in dirmngr.conf. Existing
configurations will continue to work. However, GUIs using gpgconf
now the keyserver option under the dirmngr (aka Key Acquirer) tab
unless they are in export mode in which the keyserver option is also
show for gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_component): Change printed name.
--
All network access is handled by Dirmngr so at least in the GUI option
dialog we should acknowledge that by changing the name to an issuer to
understand term. This is an update of
819bba75aaed11ecef2e274add173718358212b9 suggested by Neal Walfield.
The former term "Network Manager" conflicts with the well known GNOME
network manager tool.
* tools/gpgconf-comp.c (gc_component): Change printed name.
--
All network access is handled by Dirmngr so at least in the GUI
option dialog we should acknowledge that by changing the name to an
issuer to understand term.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (opt): Add field "use_tor".
* dirmngr/dirmngr.c (oUseTor): New.
(opts): Add --use-tor.
(parse_rereadable_options): Set option.
(main): Tell gpgconf about that option.
* dirmngr/crlfetch.c (crl_fetch): Pass TOR flag to the http module and
return an error if LDAP is used in TOR mode.
(ca_cert_fetch): Return an error in TOR mode.
(start_cert_fetch): Ditto.
* dirmngr/ks-engine-finger.c (ks_finger_fetch): Pass TOR flag to the
http module.
* dirmngr/ks-engine-hkp.c (send_request): Ditto.
* dirmngr/ks-engine-http.c (ks_http_fetch): Ditto.
* dirmngr/ks-engine-ldap.c (ks_ldap_get): Return an error in TOR mode.
(ks_ldap_search): Ditto.
(ks_ldap_put): Ditto.
* dirmngr/ocsp.c (do_ocsp_request): Ditto. Also pass TOR flag to the
http module.
* dirmngr/server.c (option_handler): Add "honor-keyserver-url-used".
(cmd_dns_cert): Return an error in TOR mode.
(cmd_getinfo): Add subcommand "tor"
* tools/gpgconf-comp.c (gc_options_dirmngr): Add TOR group.
--
More work is required to actually make --use-tor useful. For now it
returns an error for almost all network access but as soon as we have
added the TOR feature to the http module some parts will start to
work.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Add field allow_emacs_pinentry.
* agent/call-pinentry.c (start_pinentry): Act upon new var.
* agent/gpg-agent.c (oAllowEmacsPinentry): New.
(opts): Add option --allow-emacs-pinentry.
(parse_rereadable_options): Set this option.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Add new option.
--
gpgconf-comp and manual entry added by wk.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Add field allow_external_cache.
* agent/call-pinentry.c (start_pinentry): Act upon new var.
* agent/gpg-agent.c (oNoAllowExternalCache): New.
(opts): Add option --no-allow-external-cache.
(parse_rereadable_options): Set this option.
--
Pinentry 0.9.2 may be build with libsecret support and thus an extra
checkbox is displayed to allow the user to get passwords out of an
libsecret maintained cache. Security aware user may want to avoid
this feature and may do this at runtime by enabling this option.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/logging.h: Rename JNLIB_LOG_* to GPGRT_LOG_*.
* common/mischelp.h: Rename JNLIB_GCC_* to GPGRT_GCC_*.
--
JNLIB has no more meaning. Thus we switch to a GPGRT_ prefix in
anticipation that some code may eventually be moved to libgpg-error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (option_check_validity): Enable check for
UINT32.
--
Reported-by: Günther Noack <gnoack@google.com>
This is actually a bug which inhibited the checking of values of type
UINT32.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (opts, main): Add option --no-allow-mark-trusted.
Put this option into the gpgconf-list.
(main): Enable opt.allow_mark_trusted by default.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Replace
allow-mark-trusted by no-allow-mark-trusted.
* agent/trustlist.c (agent_marktrusted): Always set the "relax" flag.
--
These changes have been in effect for the Gpg4win Windows version
since 2011-01-24 and thus first released with Gpg4win 2.1.0. Given
the current state of PKIX it does not make any sense to lure the Unix
user into false security by making it harder to trust self-signed or
CAcert certificates.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 90b419f3e9d05e509348d047e05fcc79e87be6cf)
Resolved conflicts:
NEWS
agent/gpg-agent.c
* agent/gpg-agent.c [W32]: Include Several Windows header.
(opts): Change help text for enable-ssh-support.
(opts, main): Add option --enable-putty-support
(putty_support, PUTTY_IPC_MAGIC, PUTTY_IPC_MAXLEN): New for W32.
(agent_init_default_ctrl): Add and asssert call.
(putty_message_proc, putty_message_thread): New.
(handle_connections) [W32]: Start putty message thread.
* common/sysutils.c (w32_get_user_sid): New for W32 only
* tools/gpgconf-comp.c (gc_options_gpg_agent): Add
--enable-ssh-support and --enable-putty-support. Make the
configuration group visible at basic level.
* agent/command-ssh.c (serve_mmapped_ssh_request): New for W32 only.
--
This patch enables support for Putty. It has been tested with Putty
0.62 using an Unix created ssh key copied to the private-keys-v1.d
directory on Windows and with a manually crafted sshcontrol file. It
also works with a smartcard key.
May thanks to gniibe who implemented a proxy in Python to test the
putty/gpg-agent communication.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 9f32499f99a0817f63f7a73b09bdcebe60d4775d)
Resolved conflicts:
NEWS
agent/agent.h
agent/gpg-agent.c: Convert from pth to npth.
common/sysutils.c
common/sysutils.h
* g10/photoid.c (show_photos) [DISABLE_PHOTO_VIEWER]: Mark args as
unused.
* tools/gpgconf-comp.c (my_dgettext): Mark DOMAIN as unused if NLS is
not configured.
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
This solves a problem where ccid was used, the card unplugged and then
scdaemon tries to find a new (plugged in) reader and thus will
eventually try PC/SC over and over again.
Also added an explicit --kill command to gpgconf.
2010-04-20 Marcus Brinkmann <marcus@g10code.de>
* logging.c (do_log_ignore_arg): New helper function.
(log_string): Use it to remove ugly volatile hack that causes gcc
warning.
(log_flush): Likewise.
* sysutils.c (gnupg_unsetenv) [!HAVE_W32CE_SYSTEM]: Return something.
(gnupg_setenv) [!HAVE_W32CE_SYSTEM]: Likewise.
* pka.c (get_pka_info): Solve strict aliasing rule violation.
* t-exechelp.c (test_close_all_fds): Use dummy variables to
silence gcc warning.
kbx/
2010-04-20 Marcus Brinkmann <marcus@g10code.de>
* keybox-update.c [!HAVE_DOSISH_SYSTEM]: Include
../common/sysutils.h even then to silence gcc warning about
missing declaration of gnupg_remove.
tools/
2010-04-20 Marcus Brinkmann <marcus@g10code.de>
* gpgconf-comp.c (option_check_validity): Use dummy variables to
silence gcc warning.