* g10/keydb.c (kid_list_t): New.
(kid_not_found_table, n_kid_not_found_table): New.
(kid_not_found_p, kid_not_found_insert, kid_not_found_flush): New.
(keydb_insert_keyblock): Flush the new cache.
(keydb_delete_keyblock): Ditto.
(keydb_update_keyblock): Ditto.
(keydb_search): Use the new cache.
(keydb_dump_stats): New.
* g10/gpg.c (g10_exit): Dump keydb stats.
--
What we do here is to keep track of key searches by long keyids (as
stored in all signatures) so that we do not need to scan the keybox
again after we already found that this keyid will result in
not-found. As soon as we change gpg to run as a co-process we should
store this table per session because other instances of gpg may have
updated the keybox without us knowing.
On a test ring with
gpg: 94721 good signatures
gpg: 6831 bad signatures
gpg: 150703 signatures not checked due to missing keys
gpg: 5 signatures not checked due to errors
gpg: keydb: kid_not_found_table: total: 14132
this new cache speeds a --check-sigs listing up from 28 minutes to
less than 3 minutes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_handle): Add field saved_found.
(keydb_new): Init new field.
(keydb_push_found_state, keydb_pop_found_state): New.
* g10/keyring.c (kyring_handle): Add field saved_found.
(keyring_push_found_state, keyring_pop_found_state): New.
--
We have the same feature in gpgsm. It is very useful to check for an
unambiguous user id with a follow up update of the keyblock.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (print_pubkey_info): Print either "pub" or "sub".
* g10/getkey.c (get_pubkey_byfprint): Add optional arg R_KEYBLOCK.
* g10/keyid.c (keyid_from_fingerprint): Adjust for change.
* g10/revoke.c (gen_desig_revoke): Adjust for change.
* g10/card-util.c (card_status): Simplify by using new arg. Align
card-no string.
* g10/card-util.c (card_status): Remove not used GnuPG-1 code.
--
This now prints "sub" if the first used card key is actually a subkey.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (keyid_list): Add field "fpr".
(cache_user_id): Store fpr and check for dups only by fpr.
(get_pubkey_byfpr): New.
(get_user_id_string): Make static and use xasprintf.
(get_long_user_id_string): Use xasprintf.
(get_user_id_byfpr): New.
(get_user_id_byfpr_native): New.
* g10/keyid.c (fingerprint_from_pk): Make arg RET_LEN optional.
* g10/import.c (import_one): Use get_user_id_byfpr_native.
--
We now cache the userids using the fingerprint. This allows to print
the correct user id for keys with a duplicated key id. We should
eventually start to retire the use of all the old keyid based
functions. However, at some places we only have the keyid and thus
some of them will need to be kept (maybe changed with an indication to
show that more than several user ids are matching).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_handle): Add field no_caching.
(keyblock_cache): Repalce field kid by fpr.
(keydb_disable_caching): New.
(keydb_search): Use the fingerprint as cache index.
* g10/import.c (import_one): Use the fingerprint and not the kid to
lookup the key. Call keydb_disable_caching beofre re-searching for
update.
* tests/openpgp/import.test: Add a test case.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-search.c (keybox_search): Add arg r_skipped and skip too
long blobs.
* sm/keydb.c (keydb_search): Call keybox_search with a dummy param.
* g10/keydb.c (struct keydb_handle): Add field skipped_long_blobs.
(keydb_search_reset): Reset that field.
(keydb_search): Update that field.
(keydb_get_skipped_counter): New.
* g10/keylist.c (list_all): Print count of skipped keys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/passphrase.c (gpg_format_keydesc): Add mode 2. Change strings.
* g10/keydb.h (FORMAT_KEYDESC_NORMAL, FORMAT_KEYDESC_IMPORT)
(FORMAT_KEYDESC_EXPORT): New. Use them for clarity.
--
The use of the term "certificate" was more confusing than helpful.
* g10/gpg.c (oLegacyListMode, opts, main): Add --legacy-list-mode.
* g10/options.h (struct opt): Add field legacy_list_mode.
* g10/keydb.h (PUBKEY_STRING_SIZE): New.
* g10/keyid.c (pubkey_string): New.
* g10/import.c (import_one, import_secret_one): Use pubkey_string.
* g10/keylist.c (print_seckey_info): Ditto.
(print_pubkey_info, print_card_key_info): Ditto.
(list_keyblock_print): Ditto.
* g10/mainproc.c (list_node): Ditto.
* g10/pkclist.c (do_edit_ownertrust, build_pk_list): Ditto.
* g10/keyedit.c (show_key_with_all_names): Ditto. Also change the
format.
(show_basic_key_info): Ditto.
* common/openpgp-oid.c (openpgp_curve_to_oid): Also allow "ed25519".
(openpgp_oid_to_curve): Downcase "ed25519"
--
For ECC it seems to be better to show the name of the curve and not
just the size of the prime field. The curve name does not anymore fit
into the "<size><letter>" descriptor (e.g. "2048R") and a fixed length
format does not work either. Thus the new format uses
"rsa2048" - RSA with 2048 bit
"elg1024" - Elgamal with 1024 bit
"ed25519" - ECC using the curve Ed25519.
"E_1.2.3.4" - ECC using the unsupported curve with OID "1.2.3.4".
unless --legacy-list-mode is given. In does not anymore line up
nicely in columns thus I expect further changes to this new format.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Include shareddefs.h.
(main): Add option --pinentry-mode.
* g10/options.h (struct opt): Add field pinentry_mode.
* g10/passphrase.c: Include shareddefs.h.
(have_static_passphrase): Take care of loopback pinentry_mode.
(read_passphrase_from_fd): Ditto.
(get_static_passphrase): New.
(passphrase_to_dek_ext): Factor some code out to ...
(emit_status_need_passphrase): new.
* g10/call-agent.c (start_agent): Send the pinentry mode.
(default_inq_cb): Take care of the PASSPHRASE inquiry. Return a
proper error code.
(agent_pksign): Add args keyid, mainkeyid and pubkey_algo.
(agent_pkdecrypt): Ditto.
* g10/pubkey-enc.c (get_it): Pass new args.
* g10/sign.c (do_sign): Pass new args.
* g10/call-agent.c (struct default_inq_parm_s): New. Change all
similar structs to reference this one. Change all users and inquire
callback to use this struct, instead of NULL or some undefined but not
used structs. This change will help to eventually get rid of global
variables.
--
This new features allows to use gpg without a Pinentry. As a
prerequisite the agent must be configured to allow the loopback
pinentry mode (option --allow-loopback-pinentry). For example
gpg2 --pinentry-mode=loopback FILE.gpg
may be used to decrypt FILE.gpg while entering the passphrase on the
tty. If batch is used, --passphrase et al. may be used, if
--command-fd is used, the passphrase may be provided by another
process. Note that there are no try-again prompts in case of a bad
passphrase.
* kbx/keybox-defs.h (_keybox_write_header_blob): Move prototype to ..
* kbx/keybox.h: here.
* kbx/keybox-init.c (keybox_lock): Add dummy function
* g10/keydb.c: Include keybox.h.
(KeydbResourceType): Add KEYDB_RESOURCE_TYPE_KEYBOX.
(struct resource_item): Add field kb.
(maybe_create_keyring_or_box): Add error descriptions to diagnostics.
Add arg IS_BOX. Write a header for a new keybox file.
(keydb_add_resource): No more need for the force flag. Rename the
local variable "force" to "create". Add URL scheme "gnupg-kbx". Add
magic test to detect a keybox file. Add basic support for keybox.
(keydb_new, keydb_get_resource_name, keydb_delete_keyblock)
(keydb_locate_writable, keydb_search_reset, keydb_search2): Add
support for keybox.
(lock_all, unlock_all): Ditto.
* g10/Makefile.am (needed_libs): Add libkeybox.a.
(gpg2_LDADD, gpgv2_LDADD): Add KSBA_LIBS as a workaround.
* g10/keydb.h (KEYDB_RESOURCE_FLAG_PRIMARY)
KEYDB_RESOURCE_FLAG_DEFAULT, KEYDB_RESOURCE_FLAG_READONLY): New.
* g10/gpg.c, g10/gpgv.c (main): Use new constants.
--
I did most of these changes back in 2011 and only cleaned them up
now. More to follow soon.
Returning -1 as an error code is not very clean given that gpg error
has more descriptive error codes. Thus we now return
GPG_ERR_NOT_FOUND for all search operations and adjusted all callers.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
* keygen.c (gen_card_key): Obviously we should use the creation
date received from SCDAEMON, so that the fingerprints will match.
* sign.c (do_sign): Pass the serialno to the sign code.
* keyid.c (serialno_and_fpr_from_sk): New.
to libgcrypt functions, using shared error codes from libgpg-error,
replacing the old functions we used to have in ../util by those in
../jnlib and ../common, renaming the malloc functions and a couple of
types. Note, that not all changes are listed below becuause they are
too similar and done at far too many places. As of today the code
builds using the current libgcrypt from CVS but it is very unlikely
that it actually works.
(get_user_id_printable): this. Filter out all dangerous
characters. Checked all usages.
(get_user_id_string_native): Renamed to..
(get_user_id_string_printable): this. Filter out all dangerous
characters. Checked all usages.
* keyedit.c (show_basic_key_info): New.
* keylist.c (print_fingerprint): New mode 3.
* import.c (import_one): Use new function to display the user ID.
