* agent/gpg-agent.c (have_homedir_inotify): New var.
(reliable_homedir_inotify): New var.
(main): Set reliable_homedir_inotify.
(handle_tick): Call stat on the homedir.
(handle_connections): Mark availibility of the inotify watch.
* dirmngr/dirmngr.c (handle_tick): Call stat on the homedir.
(TIMERTICK_INTERVAL_SHUTDOWN): New.
(handle_connections): Depend tick interval on the shutdown state.
--
The stat call is used on systems which do not support inotify and also
when we assume that the inotify does not work reliable.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (default_homedir): Strip trailing slashes.
(gnupg_set_homedir): Ditto.
--
is_gnupg_default_homedir() does not ignore trailing slashes when
comparing directory names. This can lead to multiple agents started
on the same directory if the homedir was specified with --homedir or
GNUPGHOME without or with a number of slashes.
We now make sure that the home directory name never ends in a
slash (except for the roo of course).
GnuPG-bug-id: 3295
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (main): Always to the chdir.
* dirmngr/dirmngr.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
--
Note that only dirmngr did not call the chdir with --no-detach. thus
we kept it this way.
Tested gpg-agent by checking the properties shown by procexp.
Gnupg-bug-id: 2670
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (update_key_origin): New.
(merge_blocks): Add arg curtime.
(import_one): Pass curtime to merge_blocks. Call update_key_origin.
--
We probably need to refine the rules on how this is done. But it is a
start.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (apply_meta_data): Rename to ...
(insert_key_origin): this. Factor code out to ...
(insert_key_origin_pk, insert_key_origin_uid): new funcs.
(import_one): Move insert_key_origin behind clean_key.
(merge_blocks): Add args options, origin, and url.
(append_uid): Rename to ...
(append_new_uid): this. Add args options, curtime, origin, and url.
Call insert_key_origin_uid for new UIDs.
--
This is a straightforward change to handle new user ids.
How to test:
With an empty keyring run
gpg --with-key-origin --locate-key \
--auto-key-locate clear,nodefault,wkd wk@gnupg.org
and then append a new keyid using
gpg --with-key-origin --locate-key \
--auto-key-locate clear,nodefault,wkd wk@g10code.com
Works with my current key 80615870F5BAD690333686D0F2AD85AC1E42B367.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_get_chunk): Use KEYORG_KS if request was
done by fingerprint.
* g10/import.c (apply_meta_data): Implement that.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (apply_meta_data): Remove arg 'merge'. Add arg 'url'.
Implement WKD and DANE key origin.
(import_keys_internal): Add arg 'url' and change all callers.
(import_keys_es_stream): Ditto.
(import): Ditto.
(import_one): Ditto.
* g10/keylist.c (list_keyblock_print): Fix update URL printing.
* g10/call-dirmngr.c (gpg_dirmngr_wkd_get): Add arg 'r_url' to return
the SOURCE. Pass ks_status_cb to assuan_transact.
* g10/keyserver.c (keyserver_import_wkd): Get that URL and pass it to
the import function.
--
Note that this only for new keys. Merging this info will be added
soon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_import_cert): Use an import filter in
DANE mode.
--
We only want to see the user ids requested via DANE and not any
additional ids. This filter enables this in the same way we do this
in WKD.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/server.c (cmd_wkd_get): Print a SOURCE status.
--
This status allows to see whether the the WKD requests has been
resolved from the standard address or from a SRV record derived one.
We return only host and port and not the .well-known suffix because
that is obvious. HTTP redirects are not taken in account because they
may chnage at any time due to load balancing etc and not relevant for
gpg which may use the URL to detect changes in the WKD results.
For example my current setup returns
S SOURCE https://wkd.gnupg.org
for wk@gnupg.org. Without a SRV record
S SOURCE https://gnupg.org
would have been returned.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
* dirmngr/dirmngr.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
* scd/scdaemon.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2670
--
dev.gnupg org is the development platform but the canonical bug
address is and has always been bugs.gnupg.org. We should keep on
using this address for the case that we switch the tracker again or
split it off the development system.
That is also the reason why we should keep on communicating a plain
bug number without the 'T' prefix.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): If error code is GPG_ERR_CIPHER_ALGO,
assume the symmetric passphrase was wrong and invalidate the cache.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2270
* g10/free-packet.c (copy_public_key): Copy fields serialno and
updateurl.
--
The PK->serialno is used to get the version of the card to decide
whether it does support other algorithms than SHA-1. This value is
cached but no deep copy was done when calling copy_public_key.
Bug detected by importing some public keys and then importing a secret
key which led to a double free.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_one): If option import-clean is set,
also clean on initial import, not only for merge.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2401
* scd/ccid-driver.c (intr_cb): Only kick the loop for removal.
(bulk_in): Don't set POWERED_OFF when interrupt transfer is enabled.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keydb.h (MK_DATESTR_SIZE): New.
* g10/keyid.c (mk_datestr): Make public. Add arg bufsize and use
snprintf. Change arg atime to u32.
(datestr_from_pk): Simplify.
(datestr_from_sig): Ditto.
(expirestr_from_pk): Ditto.
(expirestr_from_sig): Ditto.
(revokestr_from_pk): Ditto.
--
Note that this also reduces the size of the static buffers from 16 to
11 which is sufficient for the string. In the past we added the 5
extra bytes to cope for bugs in gmtime which is now handles by
snprintf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (lookup): Return immediately on any other error than
GPG_ERR_NO_SECKEY from agent_probe_any_secret_key.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2204
* scd/app-openpgp.c (data_objects): Special DOs like "Login Data",
"URL", "Private DO N" can be longer size >= 256.
(struct app_local_s): Define bits for v3 card.
(get_cached_data): Use extcap.max_special_do for special DOs.
(app_select_openpgp): Detect if extcap_v3, kdf_do, and other bits.
--
GnuPG-bug-id: 3262
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* dirmngr/dns.c (HAVE_STATIC_ASSERT, HAVE___ATOMIC_FETCH_ADD)
(DNS_HAVE_SOCKADDR_UN, HAVE_SOCK_NONBLOCK): Don't use defined
to be expanded for expression evaluation.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (check_sig_and_print): Track key server request via
fingerprint.
--
New signatures carry the fingerprint and thus --auto-key-retrieve tries
to lookup the key by fingerprint. If that failed it used to also ask
the same thing by KEYID - but the keyid is part of the fingerprint and
thus it will either get no response or the wrong key back. We can
easily avoid this.
Signed-off-by: Werner Koch <wk@gnupg.org>
