* scd/ccid-driver.c (abort_cmd): Add INIT argument to support
synchronize until success, even ignoring timeout.
(bulk_in): Normal use case of abort_cmd.
(ccid_vendor_specific_init): Initial use case of abort_cmd.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-nks.c (filelist): Use special value -1 for IDLM pubkeys.
(keygripstr_from_pk_file): Handle special value.
(do_readcert): Ditto.
(do_writecert): Ditto.
--
This allows to get information about the keys from the card. However
the do_readkey still requires a fallback to readcert. This does not
work because there are no certificates yet on the card. The fix is to
fully implement do_readkey.
* scd/apdu.c (apdu_strerror): Add missing status codes.
* scd/command.c (cmd_getinfo): New sub-command apdu_strerror.
--
This is quite handy for gpg-card's APDU command and avoids that we
need to duplicate the mapping table or put it into a shared file.
* scd/app.c (app_dump_state): Also print the refcount.
(maybe_switch_app): Make sure the app exists on the card.
--
When switching the current card and the card does not support the same
apps as the former, we now reset the app to the first one.
Testcase is to use a standard OpenPGP card and a P15 card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (is_same_serialno): New.
(check_application_conflict): Use this.
(select_application): Ditto.
(app_switch_current_card): Ditto.
* scd/app-openpgp.c (check_keyidstr): Ignore the card version and also
compare case insensitive.
--
This is required because we change what we emit as serialno of OpenPGP
cards but existing keys still use the old form of the serial
number (i.e. with a firmware version).
See-commit: 3a8250c020
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_read_binary_ext): Add optional arg r_sw and
change callers.
(iso7816_read_record): Factor all code out to ...
(iso7816_read_record_ext): new.
* scd/app-p15.c (select_and_read_binary): Fallback to record reading.
(read_ef_aodf): Clear EOF error.
* scd/app.c (app_new_register): Call app_munge_serialno for Yubikeys.
(app_munge_serialno): Handle Yubikey serial numbers.
(card_get_serialno): Remove special Yubikey treatment. Drop arg
is_canonical.
(app_get_serialno): Clear ERRNO on error.
(card_get_dispserialno): New. Also change formatting of Yubikey and
OpenPGP numbers to match those printed on the card.
(app_get_dispserialno): New.
* scd/app-openpgp.c (do_getattr): Use app_get_dispserialno.
(yubikey_get_serialno): Remove.
* scd/app-piv.c (get_dispserialno): Remove.
(do_getattr): Use app_get_dispserialno.
--
This patch gets us back to a unique serial number for cards and
provides a stable serial number as printed for Yubikeys.
Because we use a slightly different serial number now for Yubikeys and
cards only supporting OpenPGP card we need to come up with another
change so that the version number of OpenPGP serial numbers are
ignored when comparing card serial numbers. This is so that existing
stub keys of gpg-agent will continue to work.
GnuPG-bug-id: 5100
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (reset_notify): Add option --keep-lock.
(do_reset): Add arg keep_lock.
(cmd_lock): Send progress status.
* g10/call-agent.c (agent_scd_apdu): Add more pseudo APDUs.
* g10/card-util.c (send_apdu): Ditto.
(factory_reset): Use lock commands.
--
This is required so that for example Kleopatra does not detect the
RESET and issues a SERIALNO of its own, thus conflicting with our
SERIALNO undefined.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (apdu_send_direct): Use lock_slot.
--
With trylock_slot, it may return SW_HOST_BUSY. This may occur when
apdu_get_status is called by scd_update_reader_status_file.
Simply using lock_slot is much easier for user of apdu_send_direct.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (ccid_require_get_status): For VENDOR_SCM reader,
return 0 only at the initial call.
(bulk_in): Don't detect an error for VENDOR_SCM reader, just kicking
the loop, to invoke scd_update_reader_status_file, which calls
ccid_slot_status again.
(ccid_slot_status): Move the call of ccid_vendor_specific_setup to...
(ccid_get_atr): ... here.
--
For readers with interrupt transfer support, it is only intr_cb which
sets handle->powered_off to 1. Keeping this condition makes no race.
The function ccid_slot_status can also detect a communication error,
which causes apdu_close_reader (but not setting ->powered_off).
GnuPG-bug-id: 5121
Fixes-commit: 920f258eb6
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-piv.c (do_writecert): Flush the cache of the data object.
--
Suggested-by: Ingo Klöcker
GnuPG-bug-id: 5102
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (ccid_vendor_specific_setup): New. Limit
only for SPR532, excluding other readers by SCM.
(ccid_slot_status): Use ccid_vendor_specific_setup.
--
We follow the setup procedure of libccid implementation, which sends
the escape command for SPR532 only.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.c (ccid_slot_status): Handle LIBUSB_ERROR_TIMEOUT.
--
With SPR532, at the first connection, it fails by
LIBUSB_ERROR_TIMEOUT, but no retry.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (struct reader_table_s): Remove is_spr532.
(pcsc_vendor_specific_init): Send the ESC command for SPR532.
(pcsc_pinpad_verify, pcsc_pinpad_modify): Remove no_lc hack.
--
The "no_lc" hack lets PC/SC-lite send the ESC command for SPR532
internally, for pcsc_pinpad_verify. However, PC/SC-lite doesn't do
that for pcsc_pinpad_modify, unfortunately. Besides, I'm not sure
this hack works on Windows, which has different implementation of
PC/SC service.
It's better to send the ESC command by the driver explicitly, at the
initialization. Sending the ESC command results PCSC_E_NOT_TRANSACTED
error when a card is not active (that is the case, usually). We
ignore this error.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (intr_cb): Handle the case of multiple messages.
--
SPR532 USB Smart Card Reader (also know as SPR332) may send two
messages at once for a single interrupt transfer. An example transfer
observed was like: 50 03 50 02, which is considered valid, according
to the CCID specification.
GnuPG-bug-id: 5065
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (send_keypair_info): Emit the algo string as part
of a KEYPAIRINFO.
* scd/command.c (do_readkey): Ditto.
* scd/app-piv.c (do_readkey): Ditto.
* scd/app-nks.c (do_learn_status_core): Ditto.
(struct fid_cache_s): Add field algostr.
(flush_fid_cache): Release it.
(keygripstr_from_pk_file): Fill it and add it to the cache. Use a
single exit label.
* scd/app-help.c (app_help_get_keygrip_string_pk): Add new arg
r_algostr. Change all callers.
--
This is helpful so that callers do not need to parse the key for this
basic information. Use "scd readkey --info-only" to return the info
status line instead of the key material; using just --info returns the
info in addition to the key material.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (kdf_setup): Fix the default value.
* scd/app-openpgp.c (do_setattr): Support kdf-setup "off" by
Zeitcontrol. Make sure Gnuk and Yubikey work well.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (verify_chv2): Call verify_a_chv with chvno=1
when needed.
--
Confusingly, verify_chv2 has two different purposes; One for
verifying with CHV2 (in addition to CHV1), and the call by
CHECKPIN. For the latter, we should check CHV1.
Fixes-commit: af189be481
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (do_setattr): Call flush_cache_item always.
--
Only it was called when there was an object with KDF_DATA_LENGTH_MAX.
No matter the VALUELEN, it should be flushed.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
The limit on 4 readers I introduced in 2003 is too low for some of our
use cases. 16 looks better. TODO: Return a useful error message in
gpg-card if the limit has been reached.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (data_objects): 0x00FA for binary data.
(do_getattr): Parse the data and send it in status lines.
(get_algorithm_attribute_string): New.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* cd/app-openpgp.c (data_objects): Add 0x00FA.
(do_getattr): Add KEY-ATTR-INFO.
--
See the section 4.4.3.11 Algorithm Information in the OpenPGP card
functional specification version 3.4.1.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/command.c (cmd_apdu): Add new option --data-atr.
* tools/gpg-card.c (cmd_apdu): Use that here. Also fix the --exlen
option and do not print the statusword in atr mode.
* tools/card-call-scd.c (scd_apdu): Detect atr mode anddon't assume a
status word.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_new_register): Do not use apdu_get_slot.
--
apdu_get_slot() may only be used after the APP has been initialized.
Thus we need to pass teh slot here directly.
Fixes-commit: 9f148360a2
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (cardtype_t): Add CARDTYPE_GNUK and
CARDTYPE_ZEITCONTROL.
* scd/app.c (strcardtype): Handle CARDTYPE_GNUK and
CARDTYPE_ZEITCONTROL.
(app_new_register): Detect Gnuk and Zeit Control implementation
by examining its ATR string.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (verify_chv2): Check availability of keys in
question.
--
With buggy Gnuk (<= 1.2.15), when no encr/auth keys are available,
it fails decrementing the signature error counter. This change
can avoid the issue.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (open_ccid_reader): Add arg r_cciderr.
(apdu_open_reader): Print a note on EPERM of the USB device.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.h (CCID_DRIVER_ERR_USB_*): New error codes.
* scd/apdu.h: New SW_HOST error codes.
* scd/apdu.c (host_sw_string): Print them
* scd/ccid-driver.c (map_libusb_error): New.
(ccid_open_usb_reader, bulk_in, abort_cmd): Map libusb error codes.
* scd/iso7816.c (map_sw): Map new codes to gpg-error.
--
This change will help to get low level error conditions from hipher
application code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_sethash): Add option --pss and allow for
--hash=null.
* agent/agent.h (struct server_control_s): Add digest.is_pss and
zero where needed.
* agent/pksign.c (agent_pksign_do): Allow for PSS with cards.
* scd/command.c (cmd_pksign): Add for --hash=none.
--
This is not a full implementaion of PSS but allows scdaemon card
drivers to detect already PSS formatted data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (close_pcsc_reader): Unlock the reader_table_lock.
(apdu_dev_list_finish): Release the context when no readers.
--
Fixes-commit: 46d185f603
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (close_pcsc_reader): Check if it's not in the loop.
--
GnuPG-bug-id: 4998
Reported-by: Kevin Locke
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/iso7816.c (CMD_UPDATE_BINARY): New.
(iso7816_update_binary): New.
* scd/app-nks.c (do_deinit): Factor some code out to...
(flush_fid_cache): new.
(do_writecert): New.
(app_select_nks): Register new handler.
--
This can be used with gpg-card to write the 3 extra certificates of a
Telesec TCOS Signature Card v2. The card with the qualified signature
is distributed with the keys for encryption and advanced signatures
but without the certificates. The certificates can be downloaded from
the website after an mail confirmation. Unpacked the downloaded
zipfile has these certificates:
auth_zert.crt
sig_zert.crt
enc_zert.crt
Using gpg-card issue these commands:
writecert NKS-NKS3.4531 <sig_zert.crt
writecert NKS-NKS3.45B1 <enc_zert.crt
writecert NKS-NKS3.4571 <auth_zert.crt
Don't mix that up, tight now there is no checking that the
certificates match the public key. I also need to write another patch
to actually implement signing and encryption with these nistp256
certificates.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_serialno): Set/clear card removed flags for all
connections using the current card.
--
This seems to solve the problems I had in gpg-card and ssh. I am not
sure why the old code was done this way - maybe an oversight when
adding support for multiple cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (do_getattr): New attrubute "UIF".
(do_learn_status): Use that.
--
Actually this is not just convenience but will make it easier to add
new keys to an openpgp card - we will need to change this only at one
place.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (select_all_additional_applications_internal): Re-select
first app. Add arg 'ctrl'.
--
Usually keygrip based access to the Yubikey does a switching back and
forth and thus keeps the card and scdaemon's internal state in sync.
However, if we do only a listing scdaemon did not reselect the first
application (e.g. OpenPGP) after adding other applications (e.g. PIV)
and thus led to wrong info returned in a listing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c (get_dispserialno): Move more to the top.
(do_getattr): Add $DISPSERIALNO and SERIALNO. Make CHV-STATUS work
with NKS15.
(verify_pin): Use dedicated min. PIN lengths.
(parse_pwidstr): Support NKS15
--
GnuPG-bug-id: 4938
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c (struct fid_cache_s): New.
(struct app_local_s): Add field 'fid_cache'.
(do_deinit): Release the cache.
(keygripstr_from_pk_file): Implement the cache.
(find_fid_by_keyref): New
(do_sign, do_decipher): Use new function.
(do_with_keygrip): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c: Major rework to support non-RSA cards.
--
This is a fist step so support this ECC card. The code has been
reworked while taking care that old cards should keep on working.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (send_card_and_app_list): Detect no app case.
--
This is a minor nug fix to return a better error message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (make_pin_prompt): Factor some code out to ...
(get_dispserialno): this.
(do_getattr): Use new fucntion for a $DISPSERIALNO.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (struct prkdf_object_s): New fields common_name and
serial_number.
(release_prkdflist): Free them.
(keygrip_from_prkdf): Parse cert and set them.
(any_control_or_space): New.
(make_pin_prompt): New.
(verify_pin): Construct a pretty PIN prompt.
(do_sign): Remove debug output.
--
The D-Trust card has the SerialNumber part of the Subject printed on
the front matter, we assume this is also possible with other cards and
thus we show this as serial number.
The holder of the card is also extracted from the card's subject.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (map_sw): Detect 0x63Cn status code.
--
I really wonder when that got lost and we ended up with a simple card
error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_select_mf): New.
* scd/app-p15.c (card_product_t): New.
(struct app_local_s): Add field 'card_product'.
(read_ef_tokeninfo): Detect D-Trust card.
(prepare_verify_pin): Switch to D-Trust AID.
(do_decipher): Restore a SE for D-TRust cards. Chnage the passing
indicator to 0x81.
--
Using what I learned from a USB trace running the Governikus Signer
Software on Windows this fixes the left over problem with the new
D-Trust card support.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (get_manufacturer): New..
(do_getattr): Add new attribute "MANUFACTURER".
(do_learn_status): Always print it.
--
This will make it easy to maintain the list of OpenPGP vendors at just
one place.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (prepare_verify_pin): Allow use without an AODF.
(verify_pin): Ditto.
(do_with_keygrip): Implement capability restrictions.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_keyinfo): Use Gcrypt constants for CAP.
* scd/app-openpgp.c (do_with_keygrip): Adjust for them.
* scd/app-piv.c (do_with_keygrip): Ditto.
--
That makes it easier to read. An open question is whether we should
allow several capabilities and whether they are the ORed or ANDed.
Signed-off-by: Werner Koch <wk@gnupg.org>
