* common/keyserver.h: Remove.
* sm/gpgsm.h (struct keyserver_spec): Remove.
(opt): Change keyserver to a strlist_t.
* sm/gpgsm.c (keyserver_list_free): Remove.
(parse_keyserver_line): Remove.
(main): Store keyserver in an strlist.
* sm/call-dirmngr.c (prepare_dirmngr): Adjust for the strlist. Avoid
an ambiguity in dirmngr by adding a prefix if needed.
* g10/options.h (struct keyserver_spec): Move definition from
keyserver.h to here. Remove most fields.
* g10/keyserver.c (free_keyserver_spec): Adjust.
(cmp_keyserver_spec): Adjust.
(parse_keyserver_uri): Simplify.
(keyidlist): Remove fakev3 arg which does not make any sense because
we don't even support v3 keys.
--
We now rely on the dirmngr to parse the keyserver specs. Thus a bad
specification will not be caught immediately. However, even before
that dirmngr had stricter tests.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/encrypt.c (gpgsm_encrypt): Take care of --quiet.
* sm/gpgsm.c: Include minip12.h.
(set_debug): Call p12_set_verbosity.
* sm/import.c (parse_p12): Dump keygrip only in debug mode.
* sm/minip12.c (opt_verbose, p12_set_verbosity): New.
(parse_bag_encrypted_data): Print info messages only in verbose mode.
--
GnuPG-bug-id: 4757
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* common/argparse.c, common/argparse.h: Rewrite.
* tests/gpgscm/main.c: Switch to the new option parser.
* g10/gpg.c: Switch to the new option parser and enable a global conf
file.
* g10/gpgv.c: Ditto.
* agent/gpg-agent.c: Ditto.
* agent/preset-passphrase.c: Ditto.
* agent/protect-tool.c: Ditto.
* scd/scdaemon.c: Ditto.
* dirmngr/dirmngr.c: Ditto.
* dirmngr/dirmngr_ldap.c: Ditto
* dirmngr/dirmngr-client.c: Ditto.
* kbx/kbxutil.c: Ditto.
* tools/gpg-card.c: Ditto.
* tools/gpg-check-pattern.c: Ditto.
* tools/gpg-connect-agent.c: Ditto.
* tools/gpg-pair-tool.c: Ditto.
* tools/gpg-wks-client.c: Ditto.
* tools/gpg-wks-server.c: Ditto.
* tools/gpgconf.c: Ditto.
* tools/gpgsplit.c: Ditto.
* tools/gpgtar.c: Ditto.
* g13/g13.c: Ditto.
* g13/g13-syshelp.c: Ditto. Do not force verbose mode.
* sm/gpgsm.c: Ditto. Add option --no-options.
--
This is backport from master
commit cdbe10b762
commit ba463128ce
commit 3bc004decd
commit 2c823bd878
commit 0e8f6e2aa9
but without changing all functions names to gpgrt. Instead we use
wrapper functions which, when building against old Libgpg-error
versions, are implemented in argparse.c using code from the current
libgpg-error. This allows to keep the dependency requirement at
libgpg-error 1.27 to support older distributions. Tested builds
against 1.27 and 1.40-beta.
Note that g13-syshelp does not anymore default to --verbose because
that can now be enabled in /etc/gnupg/g13-syshelp.conf.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (gnupg_fopen) [W32]: Use _wfopen if needed. Use
new function in most places where fopen is used.
--
The config files in 2.2 are still read using fopen - we need to change
this to allow Unicode directory names. There is also one case where
files are written using the old fopen. The new option parser in 2.3
does not have this problem but at some places fopen is also still used.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (any8bitchar) [W32]: New.
(gnupg_open): New. Replace most calls to open by this.
* common/iobuf.c (any8bitchar) [W32]: New.
(direct_open) [W32]: Use CreateFileW if needed.
--
This is yet another step for full Unicode support on Windows.
GnuPG-bug-id: 5098
(cherry picked from commit 4dcef0e178)
* common/sysutils.c (gnupg_access): New. Replace all calls to access
by this wrapper.
* common/homedir.c (w32_shgetfolderpath): Change to return UTF-8
directory name.
(standard_homedir): Adjust for change.
(w32_commondir, gnupg_cachedir): Ditto.
--
Also use SHGetFolderPathW instead of SHGetFolderPathA on Windows.
This is required to correctly handle non-ascii filenames on Windows.
GnuPG-bug-id: 5098
(cherry picked from commit c94ee1386e)
* sm/certchain.c (is_cert_still_valid): Shortcut if tehre is no DP.
* common/audit.c (proc_type_verify): Print "n/a" if a cert has no
distribution point.
* sm/gpgsm.h (opt): Add field enable_issuer_based_crl_check.
* sm/gpgsm.c (oEnableIssuerBasedCRLCheck): New.
(opts): Add option --enable-issuer-based-crl-check.
(main): Set option.
--
If the issuer does not provide a DP and the user wants such an issuer,
we expect that a certificate does not need revocation checks. The new
option --enable-issuer-based-crl-check can be used to revert to the
old behaviour which requires that a suitable LDAP server has been
configured to lookup a CRL by issuer.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from master)
* common/util.h (EXTERN_UNLESS_MAIN_MODULE): Add the definion only
here but now without the Norcroft-C. Change all other places where it
gets defined.
* common/iobuf.h (iobuf_debug_mode): Declare unconditionally as
extern.
* common/iobuf.c (iobuf_debug_mode): Define it here.
* agent/gpg-agent.c (INCLUDED_BY_MAIN_MODULE): Define here and also in
all main modules of all other programs.
* g10/main.h: Put util.h before the local header files.
--
This change is required for use with gcc/ld's LTO feature which does
not allow common blocks. Further gcc 10 will make -fno-common the
default and thus this chnage is always needed. What a pitty.
Co-authored-by: Tomáš Mráz
GnuPG-bug-id: 4831
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (main): Add special handling for bad keys in decrypt
mode.
--
The problem can easily be tested by adding --encrypt-to EXPIRED_KEY to
a decryption command. With that patch the errors are printed but
decryption continues and the process returns success unless other
errors occur.
GnuPG-bug-id: 4431
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (main): Call translate_sys2libc_fd_int to
convert the FDs.
--
This is required to actually pass gpgsm an fd on windows
and not a windows handle.
For the passphrase-fd this was already done.
(cherry picked from commit e4e0804ed1)
* doc/gpgsm.texi, doc/howto-create-a-server-cert.texi: : update
default to 3072 bits.
* sm/certreqgen-ui.c (gpgsm_gencertreq_tty): update default to
3072 bits.
* sm/certreqgen.c (proc_parameters): update default to 3072 bits.
* sm/gpgsm.c (main): print correct default_pubkey_algo.
--
3072-bit RSA is widely considered to be 128-bit-equivalent security.
This is a sensible default in 2017.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic update-defaults
Gbp-Pq: Name 0014-gpgsm-default-to-3072-bit-keys.patch
(cherry picked from commit 7955262151)
* g10/cpr.c (write_status_failure): Make it print only once.
* g10/gpg.c (wrong_args): Bump error counter.
(g10_exit): Print a FAILURE status if we ever did a log_error etc.
(main): Use log_error instead of log_fatal at one place. Print a
FAILURE status for a bad option. Ditto for certain exit points so
that we can see different error locations.
--
This makes it easier to detect errors by tools which have no way to
get the exit code (e.g. due to double forking).
GnuPG-bug-id: 3872
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oRequestOrigin): New const.
(opts): New option --request-origin.
(main): Parse that option.
* g10/options.h (struct opt): Add field request_origin.
* g10/call-agent.c (start_agent): Send option to the agent.
* sm/gpgsm.c (oRequestOrigin): New const.
(opts): New option --request-origin.
(main): Parse that option.
* sm/gpgsm.h (struct opt): Add field request_origin.
* sm/call-agent.c (start_agent): Send option to the agent.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-util.c (keybox_set_malloc_hooks): Remove.
(_keybox_malloc, _keybox_calloc, keybox_realloc)
(_keybox_free): Remove.
(keybox_file_rename): Remove. Was not used.
* sm/gpgsm.c (main): Remove call to keybox_set_malloc_hooks.
* kbx/kbxutil.c (main): Ditto.
* kbx/keybox-defs.h: Remove all separate includes. Include util.h.
remove convenience macros.
* common/logging.h (return_if_fail): New. Originally from
keybox-defs.h but now using log_debug.
(return_null_if_fail): Ditto.
(return_val_if_fail): Ditto.
(never_reached): Ditto.
--
Originally the KBX code was written to allow standalone use. However
this required lot of ugliness like separate memory allocators and
such. It also precludes the use of some standard functions from
common due to their use of the common gnupg malloc functions.
Dropping all that makes things easier. Minor disadvantages: the kbx
call done for gpg will now use gcry malloc fucntions and not the
standard malloc functions. This might be a bit slower but removing
them even fixes a possible bug in keybox_tmp_names which is used in
gpg and uses gpg's xfree which is actually gcry_free.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (main): Allow setting of the default compliance.
* tools/gpgconf-comp.c (gc_options_gpgsm): Add "compliance".
--
This is required so that we can use this option in in gpgconf.conf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certlist.c (gpgsm_find_cert): Add arg allow_ambiguous and use it.
* sm/call-dirmngr.c (inq_certificate): Pass true to ALLOW_AMBIGUOUS
(run_command_inq_cb): Ditto.
* sm/gpgsm.c (main): Pass false.
* sm/server.c (cmd_passwd): Pass false.
--
As described in my report T1644, it is possible that multiple
certificates exist with the same Distinguished Name and the same key.
In this case, verifying S/MIME signatures and other actions fail with
"certificate not found: Ambiguous name". For details see the bug
report.
To circumvent the problem, I am patching GnuPG since 2014 so that in
this case the newest of the ambiguous certificates is used.
This is not an ultimate solution of the problem: You should try every
certificate with the same DN until verification succeeds or until all
certificates fail, and if multiple certificates of a chain are
ambiguous you even have to check every combination. You may even
consider checking the keyUsage attributes of the ambiguous certificates
to reduce the number of combinations.
But in the existing case of the certificates in the German Research
Network (DFN) PKI where the newest one is the valid one and all
ambiguous certificates have the same keyUsage attributes, this patch
has proven to be sufficient over the last three years.
With every GnuPG update, I have adapted the patch, luckily I never
needed to change anything except line numbers.
GnuPG-bug-id: 1644
ChangeLog log written by wk, comment taken from mail. Signed-off line
was missing in the plain diff. However the mail with the patch and
the DCO posted as reply to that mail were both signed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (gnupg_parse_compliance_option): New function.
* common/compliance.h (struct gnupg_compliance_option): New type.
(gnupg_parse_compliance_option): New prototype.
* g10/gpg.c (parse_compliance_option): Remove function.
(compliance_options): New variable.
(main): Adapt callsite.
* sm/gpgsm.c (main): Use the new common function.
* sm/gpgsm.h (opt): New field 'compliance'.
GnuPG-bug-id: 3191
Signed-off-by: Justus Winter <justus@g10code.com>
* sm/gpgsm.c (check_special_filename): Move to ..
* common/sysutils.c (check_special_filename): here. Add arg
NOTRANSLATE.
(allow_special_filenames): New local var.
(enable_special_filenames): New public functions.
* sm/gpgsm.c (allow_special_filenames): Remove var.
(main): Call enable_special_filenames instead of setting the var.
(open_read, open_es_fread, open_es_fwrite): Call
check_special_filename with 0 for NOTRANSLATE.
* common/iobuf.c (special_names_enabled): Remove var.
(iobuf_enable_special_filenames): Remove func.
(check_special_filename): Remove func.
(iobuf_is_pipe_filename): Call new version of the function with
NOTRANSLATE set.
(do_open): Ditto.
* g10/gpg.c (main): Call enable_special_filenames instead of
iobuf_enable_special_filenames.
* g10/gpgv.c (main): Ditto.
--
Note that we keep the iobuf.c:translate_file_handle because it is a
bit different (for whatever reasons) than the translate function from
sysutils.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_add_resource): Make ANY_REGISTERED
file-global. Write a STATUS_ERROR.
(maybe_create_keyring_or_box): Check for non-accessible but existant
file.
(keydb_search): Write a STATUS_ERROR if no keyring has been registered
but continue to return NOT_FOUND.
* sm/keydb.c (keydb_add_resource): Rename ANY_PUBLIC to ANY_REGISTERED
and make file-global. Write a STATUS_ERROR.
(keydb_search): Write a STATUS_ERROR if no keyring has been registered
but continue to return NOT_FOUND. Also add new arg CTRL and change
all callers to pass it down.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp.c (my_log_monitor): New var.
(my_libassuan_log_handler): Run that monitor.
(setup_libassuan_logging): Add arg to set a log monitor and change all
callers.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/preset-passphrase.c, agent/protect-tool.c, dirmngr/dirmngr.c
* dirmngr/t-http.c, g10/gpg.c, g10/gpgv.c, g13/g13-syshelp.c
* g13/g13.c, kbx/kbxutil.c, scd/scdaemon.c, sm/gpgsm.c
* tests/gpgscm/main.c, tools/gpg-check-pattern.c
* tools/gpg-connect-agent.c, tools/gpgconf.c, tools/gpgtar.c
* tools/symcryptrun.c: Invoke log_set_prefix() with
human-readable labels.
--
Some invocations of log_set_prefix() were done with raw numeric values
instead of values that humans can understand. Use symbolic
representations instead of numeric for better readability.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/init.c (init_common_subsystems): Initialize libgcrypt.
* dirmngr/Makefile.am (dirmngr_ldap): Link with libgcrypt.
--
Most other modules already call gcry_check_version() after
init_common_subsystems() so may as well move initialization of libgcrypt
to here. Also fixes a warning in the system log from gpgconf --homedir.
Signed-off-by: Ben Kibbey <bjk@luxsci.net>
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
with clearer text.
In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something. When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.
These changes should make the language a bit clearer.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* sm/gpgsm.c (main): Add AES192 cipher. Allow SERPENT256.
--
Note that currently released Libcgrypt versions miss OIDs for Serpent
and thus Serpent can only be used with tye forthcoming Libgcrypt
1.7.1.
GnuPG-bug-id: 2273
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgsm.texi: Document '--pinentry-mode' and '--passphrase-fd'.
* sm/Makefile.am (gpgsm_SOURCES): Add new files
* sm/call-agent.c (struct default_inq_parm_s): New definition.
(start_agent): Pass in the pinentry mode.
(default_inq_cb): Handle 'PASSPHRASE' and 'NEW_PASSPHRASE' inquiries.
Adapt all call sites to the new callback cookie.
* sm/gpgsm.c (cmd_and_opt_values): Add new values.
(opts): Add new options.
(main): Handle new options.
* sm/gpgsm.h (struct opt): Add field 'pinentry_mode'.
* sm/passphrase.c: New file.
* sm/passphrase.h: Likewise.
GnuPG-bug-id: 1970
Signed-off-by: Justus Winter <justus@g10code.com>
* doc/gpgsm.texi: Drop description.
* sm/gpgsm.c (cmd_and_opt_values): Drop enum value.
(opts): Drop argument.
(main): Drop argument handling.
* sm/gpgsm.h (struct opt): Drop field 'fixed_passphrase'.
Signed-off-by: Justus Winter <justus@g10code.com>
* sm/server.c (option_handler): Add "offline".
(cmd_getinfo): Ditto.
* sm/certchain.c (is_cert_still_valid):
(do_validate_chain):
* sm/gpgsm.c (gpgsm_init_default_ctrl): Default "offline" to the value
of --disable-dirmngr.
* sm/call-dirmngr.c (start_dirmngr_ext): Better also check for
ctrl->offline.
--
Adding this option makes it easier to implement the corresponding
feature in gpgme.
Signed-off-by: Werner Koch <wk@gnupg.org>
Werner Koch