* common/util.h (EXTERN_UNLESS_MAIN_MODULE): Add the definion only
here but now without the Norcroft-C. Change all other places where it
gets defined.
* common/iobuf.h (iobuf_debug_mode): Declare unconditionally as
extern.
* common/iobuf.c (iobuf_debug_mode): Define it here.
* agent/gpg-agent.c (INCLUDED_BY_MAIN_MODULE): Define here and also in
all main modules of all other programs.
* g10/main.h: Put util.h before the local header files.
--
This change is required for use with gcc/ld's LTO feature which does
not allow common blocks. Further gcc 10 will make -fno-common the
default and thus this chnage is always needed. What a pitty.
Co-authored-by: Tomáš Mráz
GnuPG-bug-id: 4831
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 21d9bd8b87)
- Applied respective chnages also to gpg-card and keyboxd.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c (time_for_housekeeping_p): Build with --fwrapv.
Replace protecting macro.
--
I once replaced all JNLIB macros by GPGRT macros. However, I missed
to get this right for the push pragma test and used
GPGRT_GCC_HAVE_PUSH_PRAGMA
instead of the correct
GPGRT_HAVE_PRAGMA_GCC_PUSH
Now after fixing this it turned out that no-strict-overflow is not
anymore supported as oprimize pragma and thus I replaced that too
according to https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58454 .
Tested with 32 bit Windows but the real test will be in 2038.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dns-stuff.c (cached_inet_support): New variable.
(dns_stuff_housekeeping): New.
(check_inet_support): New.
* dirmngr/http.c (connect_server): Use only detected interfaces.
* dirmngr/dirmngr.c (housekeeping_thread): Flush the new cache.
--
This currently works only for Windows but that is where users really
ran into problems. The old workaround was to configure disable-ipv4
or disable-ipv6.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c (parse_ldapservers_file): Tune down error
in case no such file exists.
--
This is hardly an error because by default such a file
does not exist. This caused trouble in support because
people think "Oh the system prints an error".
GnuPG-Bug-Id: T3539
* dirmngr/dirmngr.c (post_option_parsing): Do not call set_tor_mode.
(dirmngr_sighup_action): Call it here.
(main): Call it here unless in --gpgconf-list mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr_ldap.c: Remove assert.h.
(main): Replace assert by log_assert.
* dirmngr/ldap.c (run_ldap_wrapper): Use debug options to pass
verbose options to dirmngr_ldap.
(start_cert_fetch_ldap): Ditto.
--
verbose is a pretty common option in dirmngr.conf and it would clutter
the logs with output from dirmngr_ldap. Now we require DBG_EXTPROG
or DBG_LOOKUP to make dirmngr_ldap more verbose.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oListenBacklog): New const.
(opts): New option --listen-backlog.
(listen_backlog): New var.
(main): Parse new options.
(create_server_socket): Use var instead of 5.
* dirmngr/dirmngr.c: Likewise.
* scd/scdaemon.c: Likewise.
--
GnuPG-bug-id: 3473
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/workqueue.c: New.
* dirmngr/Makefile.am (dirmngr_SOURCES): Add new file.
* dirmngr/server.c (server_local_s): New field session_id.
(cmd_wkd_get): Add a task.
(task_check_wkd_support): New stub function.
(cmd_getinfo): New sub-commands "session_id" and "workqueue".
(start_command_handler): Add arg session_id and store it in
SERVER_LOCAL.
(dirmngr_status_helpf): New.
* dirmngr/dirmngr.h (wqtask_t): New type.
* dirmngr/dirmngr.c (main): Pass 0 as session_id to
start_command_handler.
(start_connection_thread): Introduce a session_id and pass it to
start_command_handler. Run post session tasks.
(housekeeping_thread): Run global workqueue tasks.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 96a4fbecd1)
* dirmngr/domaininfo.c: New file.
* dirmngr/Makefile.am (dirmngr_SOURCES): Add file.
* dirmngr/server.c (cmd_wkd_get): Check whether the domain is already
known and tell domaininfo about the results.
--
This adds a registry for domain information to eventually avoid
useless queries for domains which do not support WKD. The missing
part is a background task to check whether a queried domain supports
WKD at all and to expire old entries.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 65038e6852)
* common/logging.c: Do not build any code if we can use the gpgrt_log
functions.
(log_logv_with_prefix): Rename to log_logv_prefix and change order of
args so that this function matches its printf like counterpart
gpgrt_logv_prefix. Change all callers.
(log_debug_with_string): Rename to log_debug_string. Change all
callers.
(log_printhex): Move first arg to end so that this function matches
its printf like counterpart gpgrt_log_printhex. Change all callers.
* common/logging.h: Divert to gpgrt/libgpg-error if we can use the
gpgrt_log functions.
(bug_at): Add inline versions if we can use the gpgrt_log functions.
* configure.ac (GPGRT_ENABLE_LOG_MACROS): Add to AH_BOTTOM.
(mycflags): Add -Wno-format-zero-length.
--
This patch enables the use of the log function from libgpgrt (aka
libgpg-error). Instead of checking a version number, we enable them
depending on macros set by recent gpg-error versions. Eventually the
whole divert stuff can be removed.
The -Wno-format-zero-length is required because log_printhex can be
called with an empty format string. Note that this is fully specified
standard C behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp.c (wait_for_sock): Round SECSLEFT.
* dirmngr/dirmngr.c (main): Take care of --debug-wait also in dameon
mode.
* common/sysutils.c (gnupg_usleep) [HAVE_NANOSLEEP]: Fix nanosleep use.
--
Without the rounding we saw in verbose mose
[...]to come up ... (5s)
[...]to come up ... (4s)
immediately without the expected one second delay. Waiting for the
next seconds did not work if nanosleep was used due to improper passed
parameters in gnupg_usleep.
Adding --debug-wait for dirmngr in daemon mode is required to test
this change.
GnuPG-bug-id: 3490
Fixes-commit: 149041b0b9
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/workqueue.c: New.
* dirmngr/Makefile.am (dirmngr_SOURCES): Add new file.
* dirmngr/server.c (server_local_s): New field session_id.
(cmd_wkd_get): Add a task.
(task_check_wkd_support): New stub function.
(cmd_getinfo): New sub-commands "session_id" and "workqueue".
(start_command_handler): Add arg session_id and store it in
SERVER_LOCAL.
(dirmngr_status_helpf): New.
* dirmngr/dirmngr.h (wqtask_t): New type.
* dirmngr/dirmngr.c (main): Pass 0 as session_id to
start_command_handler.
(start_connection_thread): Introduce a session_id and pass it to
start_command_handler. Run post session tasks.
(housekeeping_thread): Run global workqueue tasks.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/domaininfo.c: New file.
* dirmngr/Makefile.am (dirmngr_SOURCES): Add file.
* dirmngr/server.c (cmd_wkd_get): Check whether the domain is already
known and tell domaininfo about the results.
--
This adds a registry for domain information to eventually avoid
useless queries for domains which do not support WKD. The missing
part is a background task to check whether a queried domain supports
WKD at all and to expire old entries.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (have_homedir_inotify): New var.
(reliable_homedir_inotify): New var.
(main): Set reliable_homedir_inotify.
(handle_tick): Call stat on the homedir.
(handle_connections): Mark availibility of the inotify watch.
* dirmngr/dirmngr.c (handle_tick): Call stat on the homedir.
(TIMERTICK_INTERVAL_SHUTDOWN): New.
(handle_connections): Depend tick interval on the shutdown state.
--
The stat call is used on systems which do not support inotify and also
when we assume that the inotify does not work reliable.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (main): Always to the chdir.
* dirmngr/dirmngr.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
--
Note that only dirmngr did not call the chdir with --no-detach. thus
we kept it this way.
Tested gpg-agent by checking the properties shown by procexp.
Gnupg-bug-id: 2670
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
* dirmngr/dirmngr.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
* scd/scdaemon.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2670
* dirmngr/dirmngr.c (oConnectTimeout, oConnectQuickTimeout): New
enums.
(opts): New options --connect-timeout and --connect-quick-timeout.
(DEFAULT_CONNECT_TIMEOUT): New.
(DEFAULT_CONNECT_QUICK_TIMEOUT): New.
(parse_rereadable_options): Handle new options.
(post_option_parsing): New. Use instead of direct calls to
set_debug() and set_tor_mode ().
(main): Setup default timeouts.
(dirmngr_init_default_ctrl): Set standard connect timeout.
* dirmngr/dirmngr.h (opt): New fields connect_timeout and
connect_quick_timeout.
(server_control_s): New field timeout.
* dirmngr/ks-engine-finger.c (ks_finger_fetch): Pass timeout to
http_raw_connect.
* dirmngr/ks-engine-hkp.c (send_request): Call
http_session_set_timeout.
* dirmngr/ks-engine-http.c (ks_http_fetch): Ditto.
* dirmngr/server.c (cmd_wkd_get, cmd_ks_search, cmd_ks_get)
(cmd_ks_fetch): Implement --quick option.
--
The standard connect timeouts are way to long so we add a timeout to
the connect calls. Also implement the --quick option which is already
used by gpg for non-important requests (e.g. looking up a key for
verification).
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (struct opt): Add field 'disable_ipv6'.
* dirmngr/dirmngr.c (oDisableIPv6): New const.
(opts): New option --disable-ipv6.
(parse_rereadable_options): Set that option.
* dirmngr/dns-stuff.c (opt_disable_ipv6): New var.
(set_dns_disable_ipv6): New.
(resolve_name_standard): Make use of it.
* dirmngr/ks-engine-finger.c (ks_finger_fetch): Take care of
OPT.DISABLE_IPV6.
* dirmngr/ks-engine-hkp.c (map_host): Ditto.
(send_request): Ditto.
* dirmngr/ks-engine-http.c (ks_http_fetch): Ditto.
* dirmngr/ocsp.c (do_ocsp_request): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (DBG_EXTPROG_VALUE, DBG_EXTPROG): New macros.
* dirmngr/dirmngr.c (debug_flags): Add flag "extprog".
(handle_connections): Use a macro instead of -1 for an invalid socket.
* dirmngr/loadswdb.c (verify_status_cb): Debug the gpgv call.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c (hkp_cacert_filenames): New var.
(parse_rereadable_options): Store filenames from --hkp-cacert in the
new var.
(main, dirmngr_sighup_action): Pass that var to cert_cache_init.
* dirmngr/certcache.c (cert_cache_init): Add arg 'hkp_cacert' and load
those certs.
(load_certs_from_file): Use autodetect so that PEM and DER encodings
are possible.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (server_control_s): New flag 'http_no_crl'.
* dirmngr/dirmngr.c (dirmngr_init_default_ctrl): Set this flag.
* dirmngr/server.c (option_handler): New option "http-crl"
* dirmngr/http.h (HTTP_FLAG_NO_CRL): New flag.
* dirmngr/http-ntbtls.c (gnupg_http_tls_verify_cb): Consult this flag.
* dirmngr/ks-engine-hkp.c (send_request): Set flag depending on CTRL.
* dirmngr/ks-engine-http.c (ks_http_fetch): Ditto.
* dirmngr/t-http.c (main): New option --no-crl.
--
This new option can be used to enable CRL checks on a per session
base. The default is not to use CRLs for https connections.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/http-ntbtls.c: New.
* dirmngr/Makefile.am (dirmngr_SOURCES): Add file.
* dirmngr/dirmngr.h (SERVER_CONTROL_MAGIC): New.
(server_conrol_s): Add field 'magic',
* dirmngr/dirmngr.c (dirmngr_init_default_ctrl): Set MAGIC.
(dirmngr_deinit_default_ctrl): Set MAGIC to deadbeef.
* dirmngr/http.c (my_ntbtls_verify_cb): New.
(http_session_new) [HTTP_USE_NTBTLS]: Remove all CA setting code.
(send_request) [HTTP_USE_NTBTLS]: Set the verify callback. Do not call
the verify callback after the handshake.
* dirmngr/ks-engine-hkp.c (send_request): Pass
gnupg_http_tls_verify_cb to http_session_new.
* dirmngr/ks-engine-http.c (ks_http_fetch): Ditto.
* dirmngr/t-http.c (my_http_tls_verify_cb): New.
(main): Rename option --gnutls-debug to --tls-debug.
(main) [HTTP_USE_NTBTLS]: Create a session.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dns-stuff.c (disable_dns_tormode): New.
* dirmngr/dirmngr.c (oNoUseTor): New const.
(opts): New option --no-use-tor.
(tor_mode): New var.
(parse_rereadable_options): Change to use TOR_MODE.
(dirmngr_use_tor): New.
(set_tor_mode): Call disable_dns_tormode. Implement oNoUseTor.
* dirmngr/dirmngr.h (opt): Remove field 'use_tor'. Replace all
references by a call to dirmngr_use_tor().
* dirmngr/server.c (cmd_getinfo): Distinguish between default and
enforced TOR_MODE.
--
This patch replaces the global variable opt.use_tar by a function
testing a file local mode flag. This patch prepares for a
use-tor-if-available mode.
GnuPG-bug-id: 2935
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dns-stuff.c (enable_dns_tormode): Always succeed.
(reload_dns_stuff): Reset tor port.
* dirmngr/dirmngr.c (set_tor_mode): Also enable Tor mode for DNS.
(main): Remove warning that Tor mode may not fully work.
* dirmngr/server.c (cmd_dns_cert): Remove explicit Tor for DNS
initialization.
* dirmngr/t-dns-stuff.c (main): Remove option --new-circuit and error
checking for enable_dns_tormode.
--
This patch also resets the port on SIGHUP so that after starting Tor
SIGHUP is sufficient to use Tor. Without the SIGHUP and when not
using the Tor browser Dirmngr would keep on trying the Tor browser
port.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dns-stuff.c (DEFAULT_TIMEOUT): New.
(opt_timeout): New var.
(set_dns_timeout): New.
(libdns_res_open): Set the default timeout.
(libdns_res_wait): Use configurable timeout.
(resolve_name_libdns): Ditto.
* dirmngr/dirmngr.c (oResolverTimeout): New const.
(opts): New option --resolver-timeout.
(parse_rereadable_options): Set that option.
(main) <aGPGConfList>: Add --nameserver and --resolver-timeout.
* tools/gpgconf-comp.c (gc_options_dirmngr): Add --resolver-timeout
and --nameserver.
* dirmngr/http.c (connect_server): Fix yesterday introduced bug in
error diagnostic.
--
This timeout is a pretty crude thing because libdns has a few other
internal timeouts as well.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dns-stuff.c (opt_debug, opt_verbose): New vars.
(set_dns_verbose): New func.
(libdns_switch_port_p): Add debug output.
(resolve_dns_name): Ditto.
(get_dns_cert): Ditto.
(get_dns_cname): Ditto.
(getsrv_libdns, getsrv_standard): Change SRVCOUNT to an unsigend int.
(getsrv): Rename to ...
((get_dns_srv): this. Add arg R_COUNT and return an error. Add debug
output.
* dirmngr/http.c: Adjust for chnaged getsrv().
* dirmngr/ks-engine-hkp.c (map_host): Ditto.
* dirmngr/t-dns-stuff.c (main): Ditto. Call set_dns_verbose.
* dirmngr/dirmngr.c (parse_rereadable_options): Call set_dns_verbose.
--
Due to our switch to Libdns getsrv didn't worked correctly because it
returned -1 for an NXDOMAIN. However, it is perfectly okay to have no
SRV record and thus we change the way this function is called to be
aligned with the other functions and also map NXDOMAIN to a zero SRV
record count.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dns-stuff.c (libdns_reinit_pending): New var.
(enable_recursive_resolver): Set var.
(set_dns_nameserver): Ditto.
(libdns_init): Avoid double initialization.
(libdns_deinit): New.
(reload_dns_stuff): New.
(libdns_res_open): Act upon LIBDNS_REINIT_PENDING.
* dirmngr/t-dns-stuff.c (main): Call reload_dns_stuff to release
memory.
* dirmngr/dirmngr.c (cleanup): Ditto.
(dirmngr_sighup_action): Call reload_dns_stuff to set
LIBDNS_REINIT_PENDING.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Add option --disable-libdns
(USE_LIBDNS): New ac_subst and am_conditional.
(USE_C99_CFLAGS): Set only if libdns is used.
* dirmngr/Makefile.am (dirmngr_SOURCES): Move dns.c and dns.h to ...
(dirmngr_SOURCES) [USE_LIBDNS0: here.
(t_common_src): Ditto.
* dirmngr/dirmngr.c (oRecursiveResolver): New constant.
(opts): New option "--recursive-resolver".
(parse_rereadable_options): Set option.
* dirmngr/t-dns-stuff.c (main): Add option --recursive-resolver.
* dirmngr/server.c (cmd_getinfo): Depend output of "dnsinfo" on the
new variables.
* dirmngr/dns-stuff.c: Include dns.h only if USE_DNSLIB is defined.
Also build and call dnslib functions only if USE_DNSLIB is defined.
(recursive_resolver): New var.
(enable_recursive_resolver): New func.
(recursive_resolver_p): New func.
--
In case users run into problems building GnuPG, the configure option
allows to disable that support and continue w/o Tor support using the
system resolver.
--recursive-resolver was easy enough to implement and may be useful in
some situation. It does not fully work, though.
Signed-off-by: Werner Koch <wk@gnupg.org>
