* scd/ccid-driver.c (VENDOR_REINER, CYBERJACK_GO): New.
(ccid_transceive_secure): Handle the case for VENDOR_REINER.
Original work was by Alina Friedrichsen (tiny change).
--
This is revised version which adapts changes of ccid-driver.
--
This is required by newer mingw toolchain versions which demand that
winsock2.h is included before windows.h. Now, due to the use of
socket definitions in pth.h we need to include winsock2.h also in
pth.h, now pth.h is often included after an include of windows.h and
thus the compiler spits out a warning. To avoid that we include
winsock2.h at all places the compiler complains about.
* scd/scdaemon.c (opts): Ignore --disable-keypad.
--
The renaming of --disable-keypad to --disable-pinpad might mess up
configuration files managed with a GUI. The GUI does not not anymore
know about the old option and would allow the user to switch
"disable-pinpad" on. However, a "disable-keypad" might still linger
in the conf file with gpgconf not knowing about it. Thus the conf
file would always be rejected and manual intervention would be
required. Ignoring the old option nicely solves the problem.
* scd/command.c (update_reader_status_file): Add condition
ss->status == 0.
--
To reproduce the bug: (1) insert card,
(2) run "gpg2 --card-status",
(3) remove card, (4) invoke "gpg2 --card-edit",
(5) invoke some command like "verify"
The last step fails (but with no error message to user).
* scd/apdu.c (pcsc_dword_t): New. It was named as DWORD (double-word)
when a word was 16-bit.
(struct reader_table_s): Fixes for types.
(struct pcsc_readerstate_s) [__APPLE__]: Enable #pragma pack(1).
Throughout: Fixes for types.
* scd/pcsc-wrapper.c: Likewise.
--
Problem reported for 1.4.x by the issue 1358.
* scd/apdu.c (pcsc_pinpad_verify, pcsc_pinpad_modify): Default value
of maxlen for pinpad input is now 15 (was: 25).
* scd/ccid-driver.c (ccid_transceive_secure): Likewise.
--
For newer PC/SC, it is better to use FEATURE_GET_TLV_PROPERTIES to get
bMaxPINSize.
* scd/ccid-driver.c (ccid_transceive_apdu_level): Support larger
APDU.
--
This is still ad hoc change, but it's OK. Supporting full extended
APDU exchange level is not worth yet.
* scd/app-openpgp.c (struct app_local_s): Remove VARLEN.
(parse_login_data): "P=0" means to disable pinpad.
(check_keypad_request): Default is to use pinpad if available.
* scd/ccid-driver.c: Add 2013.
(VENDER_VEGA, VEGA_ALPHA):New.
(ccid_transceive_secure): VEGA_ALPHA is same firmware as GEMPC_PINPAD.
Change bNumberMessage to 0x01, as it works better (was: 0xff).
* scd/iso7816.h (struct pininfo_s): Rename from iso7816_pininfo_s.
Change meaning of MODE.
(pininfo_t): Rename from iso7816_pininfo_t.
* scd/sc-copykeys.c: Include "iso7816.h".
* scd/scdaemon.c, scd/command.c: Likewise.
* scd/ccid-driver.c: Include "scdaemon.h" and "iso7816.h".
(ccid_transceive_secure): Follow the change of PININFO_T.
* scd/app.c: Include "apdu.h" after "iso7816.h".
* scd/iso7816.c (iso7816_check_keypad, iso7816_verify_kp)
(iso7816_change_reference_data_kp): Follow the change of API.
* scd/apdu.c (struct reader_table_s): Change API of CHECK_KEYPAD,
KEYPAD_VERIFY, KEYPAD_MODIFY to have arg of PININFO_T.
(check_pcsc_keypad, check_ccid_keypad): Likewise.
(apdu_check_keypad, apdu_keypad_verify, apdu_keypad_modify): Likewise.
(pcsc_keypad_verify, pcsc_keypad_modify, ct_send_apdu)
(pcsc_send_apdu_direct, pcsc_send_apdu_wrapped, pcsc_send_apdu)
(send_apdu_ccid, ccid_keypad_operation, my_rapdu_send_apdu, send_apdu)
(send_le): Follow the change of API.
* scd/apdu.h (apdu_check_keypad, apdu_keypad_verify)
(apdu_keypad_modify): Change the API.
* scd/app-dinsig.c, scd/app-nks.c, scd/app-openpgp.c: Follow the
change.
* scd/ccid-driver.c (struct ccid_driver_s): Add auto_voltage,
auto_param, and auto_pps.
(parse_ccid_descriptor): Set auto_voltage, auto_param, and auto_pps.
Support non-autoconf readers.
(update_param_by_atr): New.
(ccid_get_atr): Use 5V for PowerOn when auto_voltage is not supported.
Use 0x10 when nonnull_nad for SetParameters.
Call update_param_by_atr for parsing ATR, and use param for
SetParameters.
Send PPS if reader requires it and card is negotiable.
When bNadValue in the return values of SetParameters == 0,
clear handle->nonnull_nad flag.
--
This change is to support more card readers by the internal driver.
Tested with 08e6:3478 Gemplus PinPad Smart Card Reader.
* scd/apdu.c (pcsc_no_service): Remove.
(open_pcsc_reader_direct, open_pcsc_reader_wrapped): Remove
pcsc_no_service support.
(apdu_open_reader): Remove R_NO_SERVICE.
* scd/apdu.h (apdu_open_reader): Remove R_NO_SERVICE.
* scd/command.c (reader_disabled): Remove.
(get_reader_slot): Follow the change of R_NO_SERVICE.
(open_card, cmd_serialno, scd_command_handler): Remove reader_disabled
support.
* scd/sc-copykeys.c (main): Follow the change of R_NO_SERVICE.
--
Daemon should handle all possible cases. Even if such a difficult
case like reader_disabled, it should not exit.
* scd/command.c (update_reader_status_file): Don't call
get_reader_slot.
--
This fix has a impact that the insertion of a card reader will not be
detected upon the insertion, but will be deferred until user tries to
access his card.
* scd/command.c (MAXLEN_SETDATA): New.
(cmd_setdata): Add option --append.
* g10/call-agent.c (agent_scd_pkdecrypt): Use new option for long data
* scd/app-openpgp.c (struct app_local_s): Add field manufacturer.
(app_select_openpgp): Store manufacturer.
(do_decipher): Print a note for broken cards.
--
Please note that I was not able to run a full test because I only have
broken cards (S/N < 346) available.
* scd/apdu.c (new_reader_slot): Acquire lock.
(open_ct_reader, open_pcsc_reader_direct, open_pcsc_reader_wrapped)
(open_ccid_reader, open_rapdu_reader): Release lock.
--
Fixes a test case of:
No libpcsclite1 installed.
Run gpg-agent
Run command "gpg-connect-agent learn /bye" with no card/token
Sometimes it fails: ERR 100663356 Not supported <SCD>
While it should be always: ERR 100663404 Card error <SCD>
* scd/app.c (select_application): Reorder application tests.
--
Although the DINSIG application is available on most German cards, it
is in reality not used. Thus showing the Geldkarte application is
more desirable for a good user experience.
Conflicts:
scd/app.c
* scd/apdu.c (apdu_connect): Do not test for zero atrlen.
--
When gpg-agent prompts for insertion of a card this error would be
returned.
Co-authored-by: Ben Kibbey <bjk@luxsci.net>
* scd/apdu.c (ccid_keypad_operation): Rename from ccid_keypad_verify.
(open_ccid_reader): Use ccid_keypad_operation for verify and modify.
* scd/ccid-driver.c (VENDOR_VASCO, VASCO_920): New.
(ccid_transceive_apdu_level): Permit sending packet where
apdulen <= 289. Support receiving packets in a chain.
(ccid_transceive_secure): Maximum is 15 for VASCO DIGIPASS 920.
Support keypad_modify method such as CHANGE_REFERENCE_DATA: 0x24.
* apdu.c (pcsc_keypad_verify): Have dummy Lc field with value 0.
(pcsc_keypad_modify): Likewise.
(pcsc_keypad_modify): It's only for ISO7816_CHANGE_REFERENCE_DATA.
bConfirmPIN value is determined by the parameter p0.
* app-openpgp.c (do_change_pin): The flag use_keypad should be 0 when
reset_mode is on, or resetcode is on. use_keypad only makes sense for
iso7816_change_reference_data_kp.
* iso7816.h (iso7816_put_data_kp): Remove.
(iso7816_reset_retry_counter_kp): Remove.
(iso7816_reset_retry_counter_with_rc_kp): Remove.
(iso7816_change_reference_data_kp): Add an argument: IS_EXCHANGE.
* iso7816.c (iso7816_put_data_kp): Remove.
(iso7816_reset_retry_counter_kp): Remove.
(iso7816_reset_retry_counter_with_rc_kp): Remove.
(iso7816_change_reference_data_kp): Add an argument: IS_EXCHANGE.
