* g10/keydb.c (keydb_get_keyblock): If the iobuf_seek fails when
reading from the cache, then simply clear the cache and try reading
from the database.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (enum iobuf_use): Add new member, IOBUF_INPUT_TEMP.
* common/iobuf.c (iobuf_temp_with_content): Create the iobuf as an
IOBUF_INPUT_TEMP, not an IOBUF_INPUT buffer. Assert that LENGTH ==
A->D.SIZE.
(iobuf_push_filter2): If A is an IOBUF_INPUT_TEMP, then make the new
filter an IOBUF_INPUT filter and set its buffer size to
IOBUF_BUFFER_SIZE.
(underflow): If A is an IOBUF_INPUT_TEMP, then just return EOF; don't
remove already read data.
(iobuf_seek): If A is an IOBUF_INPUT_TEMP, don't discard the buffered
data.
(iobuf_alloc): Allow USE == IOBUF_INPUT_TEMP.
(pop_filter): Allow USE == IOBUF_INPUT_TEMP.
(iobuf_peek): Allow USE == IOBUF_INPUT_TEMP.
(iobuf_writebyte): Fail if USE == IOBUF_INPUT_TEMP.
(iobuf_write): Fail if USE == IOBUF_INPUT_TEMP.
(iobuf_writestr): Fail if USE == IOBUF_INPUT_TEMP.
(iobuf_flush_temp): Fail if USE == IOBUF_INPUT_TEMP.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Introduce a new iobuf type, IOBUF_INPUT_TEMP. Use this for the iobuf
created by iobuf_temp_with_content instead of IOBUF_INPUT. This was
necessary so that seeking and peeking correctly work on this type of
iobuf. In particular, seeking didn't work because we discarded the
buffered data and peeking didn't work because we discarded data which
was already read, which made seeking later impossible.
* common/iobuf.h (enum iobuf_use): Name the IOBUF_OUTPUT, etc. enum.
(struct iobuf_struct): Change the field use's type to it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/t-iobuf.c (content_filter): If there is nothing to read,
don't forget to set *LEN to 0.
(main): Fix checks.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/gpg.c (opts): Remove --no-sig-create-check.
* g10/options.h (struct opt): Remove field no_sig_create_check.
* g10/sign.c (do_sign): Always check unless it is RSA and we are using
Libgcrypt 1.7.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_new): If we fail to open a keyring or keybox
correctly release all resources.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c: Improve code comments and documentation of internal
interfaces. Improve documentation of public APIs and move that to...
* g10/keydb.h: ... this file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c (struct keydb_handle): Add new field is_reset.
(keydb_new): Initialize hd->is_reset to 1.
(keydb_locate_writable): Set hd->is_reset to 1.
(keydb_search): Set hd->is_reset to 0. Don't cache a key not found if
the search started from the beginning of the database.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c (keydb_search_first): Reset the handle before starting
the search.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
This bug hasn't shown up yet in practice, because keydb_search_first
is always called immediately after a keydb_new. This changes cleans
up the semantics and will hopefully prevent future bugs.
* g10/keydb.c (struct kid_list_s): Rename from this...
(struct kid_not_found_cache_bucket): ... to this. Update users.
Remove field state.
(kid_list_t): Remove type.
(KID_NOT_FOUND_CACHE_BUCKETS): Define. Use this instead of a literal.
(kid_found_table): Rename from this...
(kid_not_found_cache_bucket): ... to this. Update users.
(kid_found_table_count): Rename from this...
(kid_not_found_cache_count): ... to this. Update users.
(kid_not_found_p): Only return whether a key with the specified key id
is definitely not in the database.
(kid_not_found_insert): Remove parameter found. Update callers.
(keydb_search): Only insert a key id in the not found cache if it is
not found. Rename local variable once_found to already_in_cache.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Commit e0873a33 started tracking whether key ids where definitely in
the database. This information is, however, never used and thus just
unnecessarily inflates the cache. This patch effectively reverts that
change (however, e0873a33 contains two separate changes and this only
reverts that change).
* configure.ac (BUILD_TIMESTAMP): Set to "<none>" by default.
--
This is based on
libgpg-error commit d620005fd1a655d591fccb44639e22ea445e4554
but changed to be disabled by default. Check there for some
background.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (sign_uids): Write an ERROR status for a signing
failure.
(menu_adduid, menu_addrevoker, menu_revsig): Ditto.
(menu_revuid, menu_revkey, menu_revsubkey): Ditto.
--
This change helps GPA to show better error messages.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_FAILURE): New.
* g10/cpr.c (write_status_failure): New.
* g10/gpg.c (main): Call write_status_failure for all commands which
print an error message here.
* g10/call-agent.c (start_agent): Print an STATUS_ERROR if we can't
set the pinentry mode.
--
This status line can be used similar to the error code returned by
commands send over the Assuan interface in gpgsm. We don't emit them
in gpgsm because there we already have that Assuan interface to return
proper error code. This change helps GPGME to return better error
codes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse): Use an int to compare to -1. Use
buf32_to_ulong.
--
Regression-due-to: 0add91ae1ca3718e8140af09294c595f47c958d3
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_signature): Change revkey's type from a struct
revocation_key ** to a struct revocation_key *. Update users.
--
revkey was a pointer into the raw data. But, C doesn't guarantee that
there is no padding. Thus, we copy the data.
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (parse): We don't handle copying packets with a
partial body length to an output stream. If this occurs, log an error
and abort.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (dbg_copy_all_packets): Check that OUT is not
NULL.
(copy_all_packets): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (parse_signature): Make sure PKTLEN doesn't
underflow. Be more careful that a read doesn't read more data than
PKTLEN says is available.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* po/POTFILES.in (trust.c): Add missing file.
* po/de.po: Changed German validity strings.
* doc/help.de.txt: Ditto.
--
Note that I replaced "uneingeschränkt" in de.po to "ultimativ" to
make the output better readable.
* g10/packet.h: Add documentation for functions defined in
parse-packet.c.
* g10/parse-packet.c: Improve comments for many functions.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/packet.h (enum_sig_subpkt): Remove argument RET_N. Update
callers.
* g10/parse-packet.c (enum_sig_subpkt): Remove argument RET_N.
--
Remove the RET_N argument, because it is unused and because it is
meaningless: it's not clear whether it is an offset into SIG->HASHED
or SIG->UNHASHED.
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (mpi_read): Improve documentation. Correctly
handle an EOF. On overflow, correctly return the number of bytes read
from the pipeline.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_read): Make control flow more obvious.
(iobuf_get_filelength): Likewise.
(iobuf_get_fd): Likewise.
(iobuf_seek): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_alloc): Check that BUFSIZE is not 0.
(iobuf_readbyte): Check that A is an input filter. Check that the
amount of read data is at most the amount of buffered data.
(iobuf_read): Check that A is an input filter.
(iobuf_writebyte): Check that A is not an input filter.
(iobuf_writestr): Check that A is not an input filter.
(iobuf_flush_temp): Check that A is not an input filter.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_push_filter2): If the head filter is a temp
filter, use IOBUF_BUFFER_SIZE for the new filter.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_push_filter2): If the pipeline is an output or
temp pipeline, the new filter shouldn't assume ownership of the old
head's internal buffer: the data was written before the filter was
added.
* common/t-iobuf.c (double_filter): New function.
(main): Add test cases for the above bug.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_temp_to_buffer): Flush each filter in the
pipeline and copy the data from the last (not the first) filter's
internal buffer.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (do_open): New function, which is a generalization of
iobuf_open, iobuf_Create, iobuf_openrw.
(iobuf_open): Call do_open.
(iobuf_create): Likewise.
(iobuf_openrw): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (iobuf_open_fd_or_name): Remove prototype. Replace
use with either iobuf_open or iobuf_fdopen_nc, as appropriate.
* common/iobuf.c (iobuf_open): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
