1
0
mirror of git://git.gnupg.org/gnupg.git synced 2024-10-30 19:58:44 +01:00
Commit Graph

821 Commits

Author SHA1 Message Date
NIIBE Yutaka
7db836c0e9 scd: Change handling of SPR532 card reader.
* scd/ccid-driver.c (ccid_vendor_specific_init): Put some workaround
for SPR532 initialization.
(ccid_slot_status): Send ESCape command after GetSlotStatus.

--

Backport master commit of:

	684a52dffa

GnuPG-bug-id: 5065
Fixes-commit: 4fae55f8ee
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2020-10-06 11:43:13 +09:00
NIIBE Yutaka
11d8d1e050 scd: For SPR532, submit the ESCape command at initialization.
* scd/ccid-driver.c (ccid_vendor_specific_init): Submit the ESC
command for VENDOR_SCM.
(ccid_transceive_secure): Don't submit the ESC command every time.

--

Backport master commit of:

	4fae55f8ee

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2020-10-06 11:42:23 +09:00
NIIBE Yutaka
dd7cc24d5f scd: Fix CCID internal driver for interrupt transfer.
* scd/ccid-driver.c (intr_cb): Handle the case of multiple messages.

--

Backport master commit of:

	7cbb513a2d

SPR532 USB Smart Card Reader (also know as SPR332) may send two
messages at once for a single interrupt transfer.  An example transfer
observed was like: 50 03 50 02, which is considered valid, according
to the CCID specification.

GnuPG-bug-id: 5065
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2020-10-06 11:41:25 +09:00
NIIBE Yutaka
186d11896c scd: Better handling of timeout and time extension.
* scd/ccid-driver.c (CCID_CMD_TIMEOUT_LONGER): Remove.
(ccid_transceive): Don't use x4 blindly for bBWI, but use dynamically
determined value.  Use value from variable wait_more for bulk_in.
Set wait_more by the value of time extension request.

--

Backport master commit of:

	f1cf799a37

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2020-10-06 11:38:40 +09:00
NIIBE Yutaka
60af035c22 scd: Fix internal CCID driver, so that -DTEST works.
* scd/ccid-driver.c: Support a test program by ccid-driver.

--

Backport from master commit:

	b310604252

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2020-10-06 11:27:41 +09:00
NIIBE Yutaka
165312dca9 scd: ccid-driver: Initial getting ATR more robustly.
* scd/ccid-driver.c (send_power_off): New.
(do_close_reader): Use send_power_off.
(ccid_get_atr): Add error recovery.

--

Backport from master commit of:

	c51a568555

GnuPG-bug-id: 4616
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2020-10-06 11:21:42 +09:00
NIIBE Yutaka
1efc01ff98 scd: Clean up the structure for future fix of PC/SC.
* scd/apdu.c (struct dev_list): Rename from ccid_table, with void*.
(open_ccid_reader): Follow the change.
(apdu_dev_list_start, apdu_dev_list_finish): Likewise.
(apdu_open_reader): Likewise.
* scd/ccid-driver.c (ccid_dev_scan): Use void *.
(ccid_dev_scan_finish, ccid_get_BAI, ccid_open_usb_reader): Likewise.
* scd/ccid-driver.h: Change the APIs.

--

Backport from master commit of:

	f44aa290c1

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2020-10-06 11:17:58 +09:00
Werner Koch
5b985b0264 scd: Map some error codes from libusb to ccid-driver error codes.
* scd/ccid-driver.h (CCID_DRIVER_ERR_USB_*): New error codes.
* scd/apdu.h: New SW_HOST error codes.
* scd/apdu.c (host_sw_string): Print them
* scd/ccid-driver.c (map_libusb_error): New.
(ccid_open_usb_reader, bulk_in, abort_cmd): Map libusb error codes.
* scd/iso7816.c (map_sw): Map new codes to gpg-error.
--

Backport from master commit:

	9a8d7e41bb

This change will help to get low level error conditions from hipher
application code.

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-10-06 11:14:59 +09:00
NIIBE Yutaka
cccdca61a8 scd: internal driver: Submit SET_INTERFACE control transfer.
* scd/ccid-driver.c (ccid_open_usb_reader): Alway submit SET_INTERFACE
control transfer.

--

Backport from master commit:

	611faf1579

This handling is not mondatory, but it's better to do so, because
there are card reader with pinpad and token with ack button, which
support user interaction.

User interaction status should be reset at open time.  The status
should be reset when the session is closed/stopped.  In practice,
since cleanup routine in a driver may not be called properly, it's
good to submit SET_INTERFACE at open time.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2020-10-06 11:14:29 +09:00
NIIBE Yutaka
e3a12b09dc scd: Internal CCID driver: Spelling cleanup.
--

Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>

Backport master commit of:
	0904b8ef34
2020-10-06 11:06:53 +09:00
NIIBE Yutaka
7b531fe580 scd: Internal CCID driver: Clean up backport from master.
* scd/ccid-driver.c (print_error) [TEST]: Add missing break.  Note
    that this is anyway an impossible case.

--

Backport master commit of:

	8fb14d3b3f

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-10-06 11:02:24 +09:00
Werner Koch
c81f02c959
w32: Add manifest files to most binaries
--

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-10-02 17:04:12 +02:00
Werner Koch
c10ba8e883
doc: Typo fixes
--
2020-10-02 12:32:37 +02:00
NIIBE Yutaka
61aea64b3c scd: Fix the use case of verify_chv2 by CHECKPIN.
* scd/app-openpgp.c (verify_chv2): Call verify_a_chv with chvno=1
when needed.

--

Backport of master commit of:
	6e51f2044a

Fixes-commit: d2f1a0a791
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2020-09-16 12:46:50 +09:00
NIIBE Yutaka
0a9665187a scd: Fix a regression for OpenPGP card.
* scd/app-openpgp.c (verify_chv2): Make sure loading keys.

--

Fixes-commit: d2f1a0a791
Reported-by: Michał Górny
GnuPG-bug-id: 5039
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2020-09-01 15:23:59 +09:00
NIIBE Yutaka
d2f1a0a791 scd: Add condition for VERIFY with 0x82.
* scd/app-openpgp.c (verify_chv2): Check availability of keys in
question.

--

Backport master commit of:
	af189be481

With buggy Gnuk (<= 1.2.15), when no encr/auth keys are available,
it fails decrementing the signature error counter.  This change
can avoid the issue.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2020-08-27 10:54:59 +09:00
NIIBE Yutaka
e285b1197b scd: Fix condition for C5 data object for newer Yubikey.
* scd/app-openpgp.c (compare_fingerprint): Relax the condition.

--

Cherry-picked from master commit of:
	f3df8dbb69

GnuPG-bug-id: 4957
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2020-05-29 11:21:01 +09:00
Werner Koch
c6324ee07a
common: Change argument order of log_printhex.
* common/logging.c (log_printhex): Chnage order of args.  Make it
printf alike.  Change all callers.
* configure.ac: Add -Wno-format-zero-length
--

This makes it consistent with modern libgpgrt logging and thus eases
back porting from newer GnuPG versions which use libgpgrt logging.

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-05-12 18:51:47 +02:00
Werner Koch
39e2260d7e
scd:p15: Return a display S/N via Assuan.
* scd/app-p15.c (make_pin_prompt): Factor some code out to ...
(get_dispserialno): this.
(do_getattr): Use new fucntion for a $DISPSERIALNO.

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-04-15 15:42:35 +02:00
Werner Koch
beaa2cbb7f
scd:p15: Show a pretty PIN prompt.
* scd/app-p15.c (struct prkdf_object_s): New fields common_name and
serial_number.
(release_prkdflist): Free them.
(keygrip_from_prkdf): Parse cert and set them.
(any_control_or_space): New.
(make_pin_prompt): New.
(verify_pin): Construct a pretty PIN prompt.
(do_sign): Remove debug output.
--

The D-Trust card has the SerialNumber part of the Subject printed on
the front matter, we assume this is also possible with other cards and
thus we show this as serial number.

The holder of the card is also extracted from the card's subject.

Signed-off-by: Werner Koch <wk@gnupg.org>

Backported from master.

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-04-15 15:42:01 +02:00
Werner Koch
9e6a3290da
scd: Return GPG_ERR_BAD_PIN on 0x63Cn status word.
* scd/iso7816.c (map_sw): Detect 0x63Cn status code.
--

I really wonder when that got lost and we ended up with a simple card
error.

Signed-off-by: Werner Koch <wk@gnupg.org>
Backported from master.
2020-04-15 15:38:13 +02:00
Werner Koch
9497d25c56
scd: Factor common PIN status check out.
* scd/iso7816.h (ISO7816_VERIFY_ERROR): New.
(ISO7816_VERIFY_NO_PIN): New.
(ISO7816_VERIFY_BLOCKED): New.
(ISO7816_VERIFY_NULLPIN): New.
(ISO7816_VERIFY_NOT_NEEDED): New.
* scd/iso7816.c (iso7816_verify_status): New.
* scd/app-nks.c (get_chv_status): Use new function.
--

Signed-off-by: Werner Koch <wk@gnupg.org>

Backported from master:
- Removed the non-existant app-piv.c patches.

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-04-15 15:35:55 +02:00
Werner Koch
471b06e91b
scd:p15: Fix decrypt followed by sign problem for D-Trust cards.
* scd/iso7816.c (iso7816_select_mf): New.
* scd/app-p15.c (card_product_t): New.
(struct app_local_s): Add field 'card_product'.
(read_ef_tokeninfo): Detect D-Trust card.
(prepare_verify_pin): Switch to D-Trust AID.
(do_decipher): Restore a SE for D-TRust cards.  Change the padding
indicator to 0x81.

* common/percent.c (percent_data_escape): new.  Taken from master.
--

Using what I learned from a USB trace running the Governikus Signer
Software on Windows this fixes the left over problem with the new
D-Trust card support.

Signed-off-by: Werner Koch <wk@gnupg.org>

Backported from master.  This required to add the percent_data_escape
function we introduced in master on 2018-07-02:

    commit 58baf40af6
    common: New function percent_data_escape.

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-04-15 15:31:56 +02:00
Werner Koch
4148976841
scd:p15: Emit MANUFACTURER, $ENCRKEYID, $SIGNKEYID.
* scd/app-p15.c (read_ef_tokeninfo): Store manufacturer_id.
(do_getattr): Implement MANUFACTURER, $ENCRKEYID and $SIGNKEYID.
(send_keypairinfo): Also print usage flags.
--

Signed-off-by: Werner Koch <wk@gnupg.org>

Backported from master.

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-04-15 15:21:25 +02:00
Werner Koch
431b3e68e0
scd:openpgp: New attribute "MANUFACTURER".
* scd/app-openpgp.c (get_manufacturer): New..
(do_getattr): Add new attribute "MANUFACTURER".
(do_learn_status): Always print it.
--

This will make it easy to maintain the list of OpenPGP vendors at just
one place.

Signed-off-by: Werner Koch <wk@gnupg.org>

Backported from master:

.. or well in master and 2.2

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-04-15 15:16:05 +02:00
Werner Koch
b0cb2c2ab8
scd:p15: Rename some variables and functions for clarity.
* scd/app-p15.c: Rename keyinfo to prkdf.

Signed-off-by: Werner Koch <wk@gnupg.org>

Backported from master.  Removed the do_with_keygrip related parts
because that function is not available.

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-04-15 15:13:42 +02:00
Werner Koch
133b6ff8cd
scd:p15: Cache the PIN.
* scd/app-p15.c (struct prkdf_object_s): Add flag pin_verified.
(verify_pin): Make use of it.
--

Theee is still a problem with the APDUs we send: Switching between
signing and decryption does work but not in the other way.

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-04-15 15:10:54 +02:00
Werner Koch
b95a0bfbba
scd:p15: Add missing keygrip retrieval for decryption.
* scd/app-p15.c (do_decipher): Get the keygrip.
--

This was lost during the backport.

Fixes-commit: 4af38ea5e4
Signed-off-by: Werner Koch <wk@gnupg.org>
2020-04-01 17:43:05 +02:00
Werner Koch
4af38ea5e4
scd:p15: Support decryption with CardOS 5 cards.
* scd/app-p15.c (do_decipher): New.
--

tested using the D-TRUSt card and a SCR3310 reader.  The Kobil KAAN
Advanced, I used for the signing tests could not be used because it
supports only Short APDU Level exchange.

Signed-off-by: Werner Koch <wk@gnupg.org>

Back ported from master.

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-04-01 16:11:29 +02:00
Werner Koch
ce9406ca37
scd:p15: Factor PIN verification out to a new function.
* scd/app-p15.c (do_sign): Factor code out to ...
(prepare_verify_pin, verify_pin): new functions.
--

Signed-off-by: Werner Koch <wk@gnupg.org>

Bakc ported from master

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-04-01 16:05:54 +02:00
Werner Koch
e730444e7b
scd:p15: Support signing with CardOS 5 cards.
* scd/app-help.c (app_help_get_keygrip_string_pk): Add optional arg
r_pkey and change all callers.
(app_help_get_keygrip_string): Ditto.
* scd/app-p15.c (struct cdf_object_s): Use bit flags
(struct aodf_object_s): Ditto.  Add field 'fid'.
(struct prkdf_object_s): Ditto.  Add fields keygrip, keyalgo, and
keynbits.
(parse_certid): Allow a keygrip instead of a certid aka keyref.
(read_ef_aodf): Store the FID.
(keygripstr_from_prkdf): Rename to ...
(keygrip_from_prkdf): this.  Remove arg r_gripstr and implement cache.
Change callers to directly use the values from the object.  Also store
the algo and length of the key ion the object.
(keyref_from_keyinfo): New. Factored out code.
(do_sign): Support SHA-256 and >2048 bit RSA keys.
common/scd:p15: Support signing with CardOS 5 cards.
* common/util.h (KEYGRIP_LEN): New.
--

This has been tested with a D-Trust card featuring 3072 bit keys.
Note that non-repudiation key for a qualified signature does not yet
work because we do not yet support rsaPSS padding.  Thus a gpgsm
--learn shows a couple of Bad Signature errors for this key.

Signed-off-by: Werner Koch <wk@gnupg.org>

Back ported from master:
- Removed do_with_keygrip
- Added KEYGRIP_LEN
- app_help_get_keygrip_string_pk actually added.
- Move keygrip_from_prkdf in do_sign before the verification.
  It used to work in master only because there it is implictly
  called prior to signing by do_with_keygrip

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-04-01 16:00:31 +02:00
Werner Koch
368f006a28
scd:p15: Read certificates in extended mode.
* scd/app-p15.c (readcert_by_cdf): Allow reading in extended mode.
* scd/app-common.h (app_get_slot): New.
--

Signed-off-by: Werner Koch <wk@gnupg.org>

(Back ported from master)

Added app_get_slot.
2020-04-01 15:01:43 +02:00
Werner Koch
64142caafe
scd: Add function for binary read in extended mode.
* scd/iso7816.c (iso7816_read_binary): Factor code out to ...
(iso7816_read_binary_ext): new function.  Add arg extended_mode.

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-04-01 14:55:30 +02:00
Werner Koch
135af66525
scd:p15: Improve diagnostics
--

This removes almost all log_debug calls and uses opt.verbose and
log_info to show card information.  Also avoid too long and thus
harder to read lines.

Signed-off-by: Werner Koch <wk@gnupg.org>

(back ported from master)
2020-04-01 14:54:47 +02:00
Werner Koch
60b0aa7e57
scd:p15: Detect CardOS 5 cards and print some basic infos.
* scd/app-p15.c (read_ef_odf): Detect the home_DF on the fly.  Silence
the garbage warning for null bytes.
(print_tokeninfo_tokenflags): New.
(read_ef_tokeninfo): Print manufacturer, label, and flags.
(app_select_p15): No need to use the app_get_slot macro.
(CARD_TYPE_CARDOS_50): New const.
(card_atr_list): Detect CardOS 5.0
--

The card under test is a "Test-Signaturkarte D-TRUST Card 3.1" for a
mere 49 Euro and no specs available.  D-Trust is a branch of the
German Bundesdruckerei.  Compare that to Telesec and Yubikey who have
always been nice enough to send bunches of sample cards without a need
to wade through lots of forms and not even asking for money.  Guess
which cards I prefer.

Signed-off-by: Werner Koch <wk@gnupg.org>

(backported from master)
2020-04-01 14:50:37 +02:00
NIIBE Yutaka
133248b297
scd: Fix pinpad handling when KDF enabled.
* scd/app-openpgp.c (do_getattr): Send the KDF DO information.

--

Fixes-commit: 95c7498b76
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 11da441016)
2020-03-18 16:05:20 +01:00
NIIBE Yutaka
b27e20a95c
scd: Disable pinpad if it's impossible by KDF DO.
* scd/app-openpgp.c (struct app_local_s): Add pinpad.disabled field.
(do_getattr): Set pinpad.disabled field.
(check_pinpad_request): Use the pinpad.disabled field.
(do_setattr): Update pinpad.disabled field.

--

GnuPG-bug-id: 4832
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 95c7498b76)
Signed-off-by: Werner Koch <wk@gnupg.org>
2020-03-18 16:02:32 +01:00
Werner Koch
21d9bd8b87
build: Always use EXTERN_UNLESS_MAIN_MODULE pattern.
* common/util.h (EXTERN_UNLESS_MAIN_MODULE): Add the definion only
here but now without the Norcroft-C.  Change all other places where it
gets defined.
* common/iobuf.h (iobuf_debug_mode): Declare unconditionally as
extern.
* common/iobuf.c (iobuf_debug_mode): Define it here.
* agent/gpg-agent.c (INCLUDED_BY_MAIN_MODULE): Define here and also in
all main modules of all other programs.

* g10/main.h: Put util.h before the local header files.
--

This change is required for use with gcc/ld's LTO feature which does
not allow common blocks.  Further gcc 10 will make -fno-common the
default and thus this chnage is always needed.  What a pitty.

Co-authored-by: Tomáš Mráz
GnuPG-bug-id: 4831
Signed-off-by: Werner Koch <wk@gnupg.org>
2020-02-10 16:37:34 +01:00
NIIBE Yutaka
9b41f58c8a scd,ccid: Add support of GEMPC_EZIO.
* scd/ccid-driver.h (GEMPC_EZIO): New.
* scd/ccid-driver.c (ccid_transceive_secure): Support GEMPC_EZIO.

--

This is backport from master.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2019-11-15 15:49:46 +09:00
Werner Koch
0a9053eff0
scd:nks: Extend keypairinfo with usage flags.
* scd/app-nks.c (do_learn_status_core): Return usage.

Signed-off-by: Werner Koch <wk@gnupg.org>
2019-08-21 13:59:20 +02:00
Werner Koch
6f67abcc03
scd:openpgp: Extend keypairinfo with usage flags.
* scd/app-openpgp.c (send_keypair_info): Return usage.
--

Signed-off-by: Werner Koch <wk@gnupg.org>
2019-08-21 13:59:18 +02:00
Werner Koch
23784f8bf0
scd: New standard attributes $ENCRKEYID and $SIGNKEYID.
* g10/call-agent.c (agent_scd_keypairinfo): Use --keypairinfo.
* sm/call-agent.c (gpgsm_agent_scd_keypairinfo): Ditto.
* scd/app-openpgp.c (do_getattr): Add attributes "$ENCRKEYID" and
"$SIGNKEYID".
* scd/app-nks.c (do_getattr): Add attributes too.
--

We already have $AUTHKEYID to locate the keyref of the key to be used
with ssh.  It will also be useful to have default keyref for
encryption and signing.  For example, this will allow us to replace
the use of "OPENPGP.2" by a app type specific keyref.

Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 2b1135cf92)

Removed changes for the non-existing app-piv.c.
Added support for NKS.
2019-08-21 11:00:18 +02:00
Werner Koch
d410b5f930
gpg: Repurpose the ISO defined DO "sex" to "salutation".
* g10/card-util.c (current_card_status): String changes.
(change_sex): Description change.
(cmds): Add "salutation"; keep "sex" as an alias.
--

Note that we can't change the used values or tags but at least the UI
should show reflect the real purpose of the field.

Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 166f3f9ec4)
2019-08-21 10:00:55 +02:00
NIIBE Yutaka
879660bf45 scd: Handle CCID bwi of time extension.
* scd/ccid-driver.c (bulk_in): Increase timeout by the multiplier
value as defined section 6.2.6 in CCID specification.

--

Backport master commit of:
	996c497a86

For TPDU level transfer, it was handled.  This is fix for APDU level
transfer.

GnuPG-bug-id: 4646
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2019-08-12 10:39:35 +09:00
NIIBE Yutaka
f8961a576d scd: Fix bBWI value.
* scd/ccid-driver.c (ccid_transceive_apdu_level): Use bBWI=0 for APDU
level transfer.
(ccid_transceive): Use bBWI=0 or the value returend by WTX for TPDU
level transfer.

--

Backported master commit of:
	858dc95643

GnuPG-bug-id: 4654
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2019-08-12 10:29:20 +09:00
Daniel Kahn Gillmor
520f5d70e4 spelling: Fix "synchronize"
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
2019-06-23 20:17:47 -04:00
Werner Koch
cb20659674
scd: Add dummy option --application-priority.
Signed-off-by: Werner Koch <wk@gnupg.org>
2019-04-02 13:32:25 +02:00
NIIBE Yutaka
38c2a9a644
g10: Fix symmetric cipher algo constant for ECDH.
* g10/ecdh.c (kek_params_table): Use CIPHER_ALGO_AES192 for
ECC strength 384, according to RFC-6637.

--

Reported-by: Trevor Bentley
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit af3efd149f)
2019-03-27 12:29:45 +01:00
Werner Koch
e7eafe1019
scd: Fix flushing of CA-FPR data objects
* scd/app-openpgp.c (do_setattr): Add new table item to flush a
different tag.

--

For whatever reasons the OpenPGP card reads the 3 CA fingerprints from
one object but sets them individually using 3 different tags.  The
cache flushing was not prepared for this and so a changed CA
fingerprint showed only up after a card reset.  This patch fixes it.

Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit c9f4c1f0de)

Fixed conflict by removing the UIF-* entries from the table.
2019-03-07 10:39:46 +01:00
Werner Koch
0eb8095626
scd: Don't let the "undefined" app cause a conflict error.
* scd/app.c (check_conflict): Ignore "undefined".

Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 5ecc7a0260)
2019-02-25 08:50:31 +01:00
NIIBE Yutaka
90e5f49b6a scd: Distinguish cancel by user and protocol error.
* scd/apdu.h (SW_HOST_CANCELLED): New.
* scd/apdu.c (host_sw_string): Support SW_HOST_CANCELLED.
(pcsc_error_to_sw): Return SW_HOST_CANCELLED for PCSC_E_CANCELLED.
* scd/iso7816.c (map_sw): Return GPG_ERR_INV_RESPONSE for
SW_HOST_ABORTED and GPG_ERR_CANCELED for SW_HOST_CANCELLED.

--
Cherry-picked master commit of:
	2396055c09

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2019-02-19 15:51:14 +09:00
Werner Koch
14816c7980
scd: Make app_genkey and supporting ISO function more flexible.
* scd/app.c (app_genkey): Add arg keytype.
* scd/app-common.h (struct app_ctx_s): Fitto for the genkey member.
* scd/command.c (cmd_genkey): Adjust for change.
* scd/iso7816.c (do_generate_keypair): Replace arg read_only by new
args p1 and p2.
(iso7816_read_public_key): Adjust for this.
(iso7816_generate_keypair): Add new args p1 and p2.
* scd/app-openpgp.c (do_genkey): Adjust for changes.
--

The OpenPGP card creates keys according to parameters read from a data
object.  Other cards we are about to implement require a direct
specification of the requested keytype.  This patch implements the
required changes.

Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 9a9cb0257a)
2019-02-11 10:59:32 +01:00
Werner Koch
c075274aac
scd: Fix parameter name of app_change_key.
* scd/app-common.h (APP_GENKEY_FLAG_FORCE): New.
* scd/app.c (app_change_pin): Rename arg reset_mode to flags and
change from int to unsigned int.
--

This is basically a documentation fix.

Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit c26af8ac26)
2019-02-11 10:59:25 +01:00
Werner Koch
6651a0640d
scd: Allow standard keyref scheme for app-openpgp.
* scd/app-openpgp.c (do_change_pin): Allow prefixing the CHVNO with
"OPENPGP."
--

The generic keyref allows for better error detection in case a keyref
is send to a wrong card.  This has been taken from master commit
3231ecdafd which has additional changed
for gpg-card-tool, which is only available there.

Signed-off-by: Werner Koch <wk@gnupg.org>
2019-02-11 10:59:22 +01:00
Werner Koch
d4082ff430
scd: Add option --clear to PASSWD.
* scd/command.c (cmd_passwd): Add option --clear.
(send_status_printf): New.
* scd/app-common.h (APP_CHANGE_FLAG_CLEAR): New.
* scd/app-nks.c (do_change_pin): Return an error if that option is
used.
* scd/app-openpgp.c (do_change_pin): Ditto.
--

Card application may support this option to clear the PIN verification
status of a specific PIN.

Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 29929e6552)
2019-01-22 10:14:55 +01:00
Werner Koch
9309175de8
scd: One new and one improved 7816 function.
* scd/apdu.c (apdu_send_direct): New arg R_SW.
* scd/command.c (cmd_apdu): Ditto.
* scd/iso7816.c (iso7816_apdu_direct): New arg R_SW.
(iso7816_general_authenticate): New.
* scd/app-nks.c (get_chv_status, get_nks_version): Pass NULL for new
arg.
--

iso7816_general_authenticate will be used for the PIV card support.
The new arg to iso7816_apdu_direct and apdu_send_direct allows to get
the raw status word back without the need to handle an output buffer.

Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 70bb5c7931)
2019-01-22 10:13:28 +01:00
NIIBE Yutaka
9dc76d599c scd: Fix for USB INTERRUPT transfer.
* scd/ccid-driver.c (intr_cb): When LIBUSB_TRANSFER_NO_DEVICE,
just handle this event as failure.

--

Cherry-picked from master commit:

	5ab3bc422a

It used to try another interrupt transfer request to make sure
if it fails again.

GnuPG-bug-id: 4308
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2019-01-17 08:13:17 +09:00
NIIBE Yutaka
ffe31f405f scd: Support "acknowledge button" feature.
* scd/apdu.c (set_prompt_cb): New member function.
(set_prompt_cb_ccid_reader): New function.
(open_ccid_reader): Initialize with set_prompt_cb_ccid_reader.
(apdu_set_prompt_cb): New.
* scd/app.c (lock_app, unlock_app): Add call to apdu_set_prompt_cb.
* ccid-driver.c (ccid_set_prompt_cb): New.
(bulk_in): Call ->prompt_cb when timer extension.
* scd/command.c (popup_prompt): New.

--

Cherry-picked master commit of:
	7a5a4c4cac

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-12-18 10:18:23 +09:00
NIIBE Yutaka
d4bc805152 scd: Make "learn" report about KDF data object.
* scd/app-openpgp.c (do_learn_status): Report KDF attr.
* g10/card-util.c (current_card_status): Output KDF for with_colons.

--

Backport of master commit: 05d163aebc
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-12-06 17:11:55 +09:00
NIIBE Yutaka
7e2b0488d1 scd: Fix signing authentication status.
* scd/app-openpgp.c (do_sign): Clear DID_CHV1 after signing.

--

Cherry-picked from master commit of:
	78f542e1f4

We have a corner case: In "not forced" situation and authenticated,
and it is changed to "forced", card implementaiton can actually accept
signing, but GnuPG requires authentication, because it is "forced".

GnuPG-bug-id: 4177
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-10-15 11:20:47 +09:00
Jiří Keresteš
d43248af92
scd: Add support for Trustica Cryptoucan.
(cherry picked from commit 967d3649d2)
2018-07-29 18:39:18 +02:00
NIIBE Yutaka
cb1731c23c scd: Writing KDF resets auth state.
* scd/app-openpgp.c (do_setattr): Clear auth state.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-04-03 20:30:29 +09:00
NIIBE Yutaka
0c097575a9 g10,scd: Support single salt for KDF data object.
* g10/card-util.c (gen_kdf_data): Support single salt.
(kdf_setup): Can have argument for single salt.
* scd/app-openpgp.c (pin2hash_if_kdf): Support single salt.

--

Gnuk has "admin-less" mode.  To support "admin-less" mode with KDF
feature, salt should be same for user and admin.  Thus, I introduce a
valid use of single salt.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-03-30 12:48:04 +09:00
NIIBE Yutaka
2969271876 scd: Support changing key attribute back to RSA.
* scd/app-openpgp.c (change_rsa_keyattr): Try usual RSA.

--

In the OpenPGP card specification, there are multiple options to
support RSA (having P and Q or not, etc.), and it is implementation
dependent.  Since GnuPG doesn't have knowledge which card
implementation support which option and there is no way (yet) for card
to express itself which key attributes are supported, we haven't
supported key attribute change back to RSA.  But, many card
implementation uses P and Q, try this option.  If other cases,
factory-reset would be easier option.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-03-30 09:59:09 +09:00
NIIBE Yutaka
96918346be agent,scd: Use pointer to represent HANDLE.
* agent/call-scd.c [HAVE_W32_SYSTEM] (start_scd): Format with %p.
* scd/command.c [HAVE_W32_SYSTEM] (option_handler): Use void *.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-03-27 16:24:17 +09:00
NIIBE Yutaka
0152ba7c98 scd: Support KDF DO setup.
* g10/call-agent.c (learn_status_cb): Parse the capability for KDF.
* g10/card-util.c (gen_kdf_data, kdf_setup): New.
(card_edit): New admin command cmdKDFSETUP to call kdf_setup.
* scd/app-openpgp.c (do_getattr): Emit KDF capability.

--

GnuPG-bug-id: 3823
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-03-22 15:50:31 +09:00
NIIBE Yutaka
11bbd99477 scd: signal mask should be set just after npth_init.
* scd/scdaemon.c (setup_signal_mask): New.
(main): Call setup_signal_mask.
(handle_connections): Remove signal mask setup.

--

For new thread, signal mask is inherited by thread creation.
Thus, it is best to setup signal mask just after npth_init.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-03-19 16:36:30 +09:00
NIIBE Yutaka
fd23a0524d scd: Fix suspend/resume handling for CCID driver.
* scd/ccid-driver.c (intr_cb): Try submitting INTERRUPT urb
to see if it's suspend/resume.

--

Upon suspend/resume, LIBUSB_TRANSFER_NO_DEVICE is returned, since all
URBs are cancelled.  We need to see if it's real NODEV error or its by
suspend/resume.  We can distinguish by sending URB again.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-03-15 23:59:22 +09:00
NIIBE Yutaka
c84bae69e9 scd: After fatal error, shutdown a reader.
* scd/apdu.c (pcsc_send_apdu): Notify main loop after
fatal errors.

--

GnuPG-bug-id: 3825
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-03-13 12:53:49 +09:00
NIIBE Yutaka
71e5282c25 scd: Fix for GNU/Linux suspend/resume.
* configure.ac (require_pipe_to_unblock_pselect): Default is "yes".
* scd/scdaemon.c (scd_kick_the_loop): Minor clean up.

--

Normally SIGCONT or SIGUSR2 works for unblocking pselect.  But on my
machine with GNU/Linux, when a machine is suspend/resume-ed, pselect
keeps blocked, while signal itself is delivered.

It's better to use pipe.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-03-13 12:05:57 +09:00
NIIBE Yutaka
655f0b9ad0 scd: Fix typo in previous commit.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-03-12 10:17:05 +09:00
NIIBE Yutaka
1e27c0e04c scd: More fix with PC/SC for Windows.
* scd/apdu.c (pcsc_get_status): Return status based on CURRENT_STATUS.
Add debug log.

--

GnuPG-bug-id: 3825
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-03-09 08:56:50 +09:00
NIIBE Yutaka
f8b8b6aac2 scd: Fix status check when using PC/SC.
* scd/apdu.c (struct reader_table_s): Add field of current_state.
(new_reader_slot): Initialize current_state.
(pcsc_get_status): Keep the status in READER_TABLE array.
Return SW_HOST_NO_READER when PCSC_STATE_CHANGED.
* scd/scdaemon.c (handle_connections): Silence a warning.

--

To detect some change of card status, including suspend/resume
possibly, SCardGetStatusChange should be used keeping the
dwCurrentState field.

This change could improve situation for suspend/resume with Yubikey on
Windows.  Even not, this is doing the Right Thing.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-03-08 16:51:51 +09:00
Werner Koch
f19ff78f0f
common: Use new function to print status strings.
* common/asshelp2.c (vprint_assuan_status_strings): New.
(print_assuan_status_strings): New.
* agent/command.c (agent_write_status): Replace by call to new
function.
* dirmngr/server.c (dirmngr_status): Ditto.
* g13/server.c (g13_status): Ditto.
* g13/sh-cmd.c (g13_status): Ditto.
* sm/server.c (gpgsm_status2): Ditto.
* scd/command.c (send_status_info): Bump up N.
--

This fixes a potential overflow if LFs are passed to the status
string functions.  This is actually not the case and would be wrong
because neither the truncating in libassuan or our escaping is not the
Right Thing.  In any case the functions need to be more robust and
comply to the promised interface.  Thus the code has been factored out
to a helper function and N has been bumped up correctly and checked in
all cases.

For some uses this changes the behaviour in the error case (i.e. CR or
LF passed): It will now always be C-escaped and not passed to
libassuan which would truncate the line at the first LF.

Reported-by: private_pers
2018-02-14 12:21:44 +01:00
Arnaud Fontaine
25f3b69129 scd: Improve KDF-DO support
* scd/app-openpgp.c (pin2hash_if_kdf): Check the content of KDF DO.

--

Length check added by gniibe.

Signed-off-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>
2018-02-13 09:28:13 +09:00
NIIBE Yutaka
0a3bec2c25 scd: Fix handling for Data Object with no data.
* scd/app-openpgp.c (get_cached_data): Return NULL for Data Object
with no data.

--

When GET_DATA returns no data with success (90 00), this routine
firstly returned buffer with length zero, and secondly (with cache)
returned NULL, which is inconsistent.  Now, it returns NULL for both
cases.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-02-12 18:56:58 +09:00
NIIBE Yutaka
015fe1c47b scd: Use pipe to kick the loop on NetBSD.
* configure.ac (HAVE_PSELECT_NO_EINTR): New.
* scd/scdaemon.c (scd_kick_the_loop): Write to pipe.
(handle_connections): Use pipe.

--

On NetBSD, signal to the same process cannot unblock pselect,
with unknown reason.  Use pipe instead, for such systems.

GnuPG-bug-id: 3778
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-02-07 12:43:07 +09:00
NIIBE Yutaka
91303b7df9 scd: Support KDF Data Object of OpenPGPcard V3.3.
* scd/app-openpgp.c (do_getattr, do_setattr): Add KDF support.
(pin2hash_if_kdf): New.
(verify_a_chv): Add PINLEN arg.  Use pin2hash_if_kdf.
(verify_chv2, do_sign): Follow the change of verify_a_chv.
(verify_chv3, do_change_pin): Use pin2hash_if_kdf.

--

GnuPG-bug-id: 3152
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2018-01-22 19:46:14 +09:00
NIIBE Yutaka
4f88b0f561 scd: Fix for inactive card at start by internal CCID driver.
* scd/ccid-driver.c (do_close_reader): Set NULL on close.
(bulk_in): Move DEBUGOUT and check by EP_INTR.
(ccid_get_atr): Clear powered_off flag after initial status check.

--

Many card readers automatically turn on inserted card, but some
defaults to turning off at start.

GnuPG-bug-id: 3508
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-12-27 17:20:03 +09:00
Werner Koch
c81a447190
Change backlog from 5 to 64 and provide option --listen-backlog.
* agent/gpg-agent.c (oListenBacklog): New const.
(opts): New option --listen-backlog.
(listen_backlog): New var.
(main): Parse new options.
(create_server_socket): Use var instead of 5.
* dirmngr/dirmngr.c: Likewise.
* scd/scdaemon.c: Likewise.
--

GnuPG-bug-id: 3473
Signed-off-by: Werner Koch <wk@gnupg.org>
2017-12-12 14:14:40 +01:00
NIIBE Yutaka
0bb7fd0cab scd: Enable card removal check after select_application.
* scd/apdu.c (open_ccid_reader): Fix error handling of ccid_get_atr.
* scd/app.c (select_application): Always kick the loop if new APP.
* scd/ccid-driver.c (ccid_open_usb_reader): Don't setup at open.
(ccid_slot_status): Setup interrupt transfer when !ON_WIRE.

--

We can use the interrupt transfer to be notified about card status
change.  In this case, we don't need to issue PC_to_RDR_GetSlotStatus
command.  This change improve the setup the notification; it should be
done after registration of APP.

When the setup is done just after opening the USB connection (before
issuing PC_to_RDR_IccPowerOn), a reader might notifies about no card
availability (because of not yet powered on), even though the card is
ready to be powered on.

GnuPG-bug-id: 3508
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-11-21 12:19:15 +09:00
NIIBE Yutaka
827abe01a7
scd: Fix for large ECC keys.
* scd/app-openpgp.c (do_decipher): Support larger length.

--

Reported-by: Achim Pietig <achim@pietig.com>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-09-11 11:39:14 +02:00
Werner Koch
45d5f5800a
scd: Convey the correct length for Le
* scd/app-openpgp.c (determine_rsa_response): Round bits up.
--

Co-authored-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>

Arnaud wrote:

  Actually, when the incorrect expected response length (i.e. Le
  field) is transmitted to the card, the card's answer is missing a
  byte (i.e. ...  6101) so an additional command has to be sent to the
  card to retrieve the last byte. Using the correct length avoids to
  send the additional command to retrieve the missing byte, when the
  computed length is wrong.

Note that an value of 65537 for E is pretty standard and thus we can
avoid the 6101 return code inmost cases.

Signed-off-by: Werner Koch <wk@gnupg.org>
2017-08-27 16:42:52 +02:00
Werner Koch
0ef50340ef
w32: Also change the directory on daemon startup.
* agent/gpg-agent.c (main): Always to the chdir.
* dirmngr/dirmngr.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
--

Note that only dirmngr did not call the chdir with --no-detach.  thus
we kept it this way.

Tested gpg-agent by checking the properties shown by procexp.

Gnupg-bug-id: 2670
Signed-off-by: Werner Koch <wk@gnupg.org>
2017-07-25 13:04:18 +02:00
Werner Koch
226f143ca0
common: New functions gnupg_daemon_rootdir and gnupg_chdir.
* common/sysutils.c (gnupg_chdir): New.
* common/homedir.c (gnupg_daemon_rootdir): New.
* agent/gpg-agent.c (main): Use these functions instead chdir("/").
* dirmngr/dirmngr.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
--

Signed-off-by: Werner Koch <wk@gnupg.org>
2017-07-25 12:43:37 +02:00
Werner Koch
f2d2648a4d
Revert "w32: Change directory on daemon startup."
--
This reverts commit 78ebc62604.
Gnupg-bug-id: 2670
2017-07-25 12:19:08 +02:00
Marcus Brinkmann
78ebc62604 w32: Change directory on daemon startup.
* agent/gpg-agent.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
* dirmngr/dirmngr.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
* scd/scdaemon.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.

Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2670
2017-07-24 16:31:55 +02:00
NIIBE Yutaka
45e40487fb scd: Use unsigned int for fields.
* scd/app-openpgp.c (data_objects): Use unsigned ints.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-07-24 16:10:22 +09:00
NIIBE Yutaka
d8a55da715 scd: Fix SEGV in CCID driver.
* scd/ccid-driver.c (intr_cb): Only kick the loop for removal.
(bulk_in): Don't set POWERED_OFF when interrupt transfer is enabled.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-07-21 13:26:53 +09:00
NIIBE Yutaka
892e86b0dc scd: Add debug message for v3 card.
* scd/app-openpgp.c (show_caps): Output more messages.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-07-21 11:21:19 +09:00
NIIBE Yutaka
69614d5501 scd: Support longer data length for special DOs for v3 card.
* scd/app-openpgp.c (data_objects): Special DOs like "Login Data",
"URL", "Private DO N" can be longer size >= 256.
(struct app_local_s): Define bits for v3 card.
(get_cached_data): Use extcap.max_special_do for special DOs.
(app_select_openpgp): Detect if extcap_v3, kdf_do, and other bits.

--

GnuPG-bug-id: 3262
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-07-20 17:27:21 +09:00
NIIBE Yutaka
8defb21d34 scd: Fix error code on failure at usb_init.
* scd/ccid-driver.c (ccid_dev_scan): Return GPG_ERR_ENODEV.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-05-31 10:05:36 +09:00
NIIBE Yutaka
5c33649782 scd: Handle a failure of libusb_init.
* scd/ccid-driver.c (ccid_get_reader_list, ccid_dev_scan): Handle
failure.

--

Reported-by: Yuriy M. Kaminskiy <yumkam@gmail.com>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-05-31 09:49:54 +09:00
NIIBE Yutaka
5c8fe54809 Spelling fixes in docs and comments.
--

In addition, fix trailing spaces in tests/inittests.

GnuPG-bug-id: 3121
Reported-by: ka7 (klemens)
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-04-28 10:06:33 +09:00
NIIBE Yutaka
f053f99ed0 scd: Handle unexpected suspend/resume by CCID driver.
* scd/ccid-driver.c (bulk_in): Handle unexpected failure.

--

GnuPG-bug-id: 3083
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-04-12 11:21:08 +09:00
NIIBE Yutaka
7501f2e9c4 scd: Relax a condition for p15 driver.
* scd/app-p15.c (read_ef_aodf): Fix.

--

Fixes-commit: 3c1ad96f1c
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-04-10 13:18:30 +09:00
NIIBE Yutaka
3c1ad96f1c scd: Relax a condition for p15 driver.
* scd/app-p15.c (read_ef_aodf): Remove possibly redundant condition.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-04-10 12:59:29 +09:00
NIIBE Yutaka
34199ef677 scd: Remove "special transport" support.
* scd/ccid-driver.c (transports, my_sleep, prepare_special_transport)
(writen): Remove.
(ccid_dev_scan, ccid_dev_scan_finish, ccid_get_BAI): Only for USB.
(ccid_open_reader, do_close_reader, bulk_out, bulk_in, abort_cmd)
(ccid_poll, ccid_transceive): Likewise.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-04-10 12:25:06 +09:00
NIIBE Yutaka
cc420d3488 scd: Internal CCID reader cleanup.
* scd/ccid-reader.c (scan_usb_device): Only for scan mode, so, rename
from scan_or_find_usb_device.
(scan_devices): Likewise.  Remove support of special transport types.
(ccid_get_reader_list): Simplify.
(abort_cmd): Fix error return.
(send_escape_cmd): Fix for RESULTLEN == NULL.
(ccid_transceive_secure): Remove unnecessary var updates.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-04-07 13:30:35 +09:00
NIIBE Yutaka
3c93595d70 scd: Don't keep CCID reader open when card is not available.
* scd/apdu.c (open_ccid_reader): Fail if no ATR.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-04-07 12:18:16 +09:00
NIIBE Yutaka
d58275703f scd: Change the order of applications when accessed.
* scd/app.c (select_application): Move the app to top.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-03-27 13:56:02 +09:00
NIIBE Yutaka
0848cfcce7 scd: Fix timeout handling for key generation.
* scd/ccid-driver.c (CCID_CMD_TIMEOUT): Back to original value.
(CCID_CMD_TIMEOUT_LONGER): New.
(ccid_transceive): Add kludge for key generation.

--

At key generation of longer key size, OpenPGP card sends back "time
extension" with BWI=100, which is unusual value in the protocol and it
actually requires host having longer timeout like 43 seconds.

Reported-by: Szczepan Zalega <szczepan@nitrokey.com>
Fixes-commit: 6510df3a7c
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-03-27 11:25:00 +09:00
NIIBE Yutaka
d6c7bf1f8a More change for common.
* g10, scd, test, tools: Follow the change of removal of -Icommon.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-03-07 20:32:09 +09:00
NIIBE Yutaka
70aca95d68 Remove -I option to common.
* dirmngr/Makefile.am (AM_CPPFLAGS): Remove -I$(top_srcdir)/common.
* g10/Makefile.am (AM_CPPFLAGS): Ditto.
* g13/Makefile.am (AM_CPPFLAGS): Ditto.
* kbx/Makefile.am (AM_CPPFLAGS): Ditto.
* scd/Makefile.am (AM_CPPFLAGS): Ditto.
* sm/Makefile.am (AM_CPPFLAGS): Ditto.
* tools/Makefile.am (AM_CPPFLAGS): Ditto.
* Throughout: Follow the change.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-03-07 20:25:54 +09:00
NIIBE Yutaka
cc933a96f8 scd: Close THE_EVENT handle.
* scd/scdaemon.c (handle_connections): Close the handle.

--

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-03-07 10:19:40 +09:00
NIIBE Yutaka
e6ca015ae1 scd: Fix compiler warnings for app-openpgp.c.
* scd/app-openpgp.c (retrieve_key_material): Remove touching I.
(do_change_pin): Make sure going to leave if PINVALUE == 0.
(rsa_writekey): Emit simpler log.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-03-06 15:14:18 +09:00
NIIBE Yutaka
9bf39ed75d scd: More cleanup of old code.
* scd/app-dinsig.c (do_sign): Remove assignment to HASHALGO.
* scd/app-p15.c (parse_keyusage_flags): Remove assign to MASK.
(read_ef_aodf): Likewise.
(read_ef_cdf): Change the control to parse_error.
* scd/app-sc-hsm.c (parse_keyusage_flags): Remove assign to MASK.
(read_ef_prkd): Remove assign to S.
(read_ef_prkd): Check if PRKDF is not null.
(read_ef_cd): Likewise for CDF.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-03-06 14:59:02 +09:00
NIIBE Yutaka
cb6337329d scd: Clean up old code.
* scd/apdu.c (CT_init, CT_data, CT_close): Remove.
(ct_error_string, ct_activate_card, close_ct_reader, reset_ct_reader)
(ct_get_status, ct_send_apdu, open_ct_reader): Remove.
(new_reader_slot) [NEED_PCSC_WRAPPER]: Remove fd and pid handling.
(writen, readn): Remove.
(pcsc_get_status, pcsc_send_apdu, control_pcsc, close_pcsc_reader)
(reset_pcsc_reader, open_pcsc_reader): Only DIRECT version.
(apdu_open_one_reader): Remove CT_api handling.
(apdu_get_status_internal, send_le): Fix to stop warnings.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-03-06 14:18:06 +09:00
NIIBE Yutaka
0703de01c8 scd: Fix API of select_file/_path.
* scd/iso7816.c (iso7816_select_file, iso7816_select_path): Remove
unused arguments.
* scd/app-dinsig.c (do_readcert): Follow the change.
* scd/app-help.c (app_help_read_length_of_cert): Likewise.
* scd/app-nks.c (keygripstr_from_pk_file, do_readcert, do_readkey)
(switch_application): Likewise.
* scd/app-p15.c (select_and_read_binary, select_ef_by_path)
(micardo_mse, app_select_p15): Likewise.
* scd/app.c (app_new_register): Likewise.

--

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-03-06 13:39:46 +09:00
NIIBE Yutaka
f9acc7d18b scd: Fix scd_kick_the_loop.
* scd/scdaemon.c (notify_fd): Remove.
(the_event) [W32]: New.
(main_thread_pid) [!W32]: New.
(handle_signal): Handle SIGCONT.
(scd_kick_the_loop): Use signal on UNIX and event on Windows.
(handle_connections): Likewise.
--

Code with CreateEvent is copied from gpg-agent.c.
Code for signal is copied from dkg's gpg-agent-idling in Debian.

GnuPG-bug-id: 2982
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-03-03 20:40:06 +09:00
Werner Koch
f98c8cb013
scd,agent: Improve the OpenPGP PIN prompt texts.
* scd/app-openpgp.c (get_prompt_info): Change texts.
* agent/call-pinentry.c (struct entry_features): New.
(getinfo_features_cb): New.
(start_pinentry): Set new fucntion as status callback.
(build_cmd_setdesc): New.  Replace all snprintf for SETDESC by this
one.
--

Suggested-by: Andre Heinecke
Signed-off-by: Werner Koch <wk@gnupg.org>
2017-02-22 18:51:02 +01:00
Werner Koch
7ccabbc26a
Revert "scd: Nitpicks on the improved card prompts"
--
This reverts commit 143ca039e1.

I have a more improved version in the works.
2017-02-22 18:49:43 +01:00
Andre Heinecke
143ca039e1
scd: Nitpicks on the improved card prompts
* src/app-openpgp.c (get_prompt_info): Change wording and order
slightly.

--

The word "Card" was repeated too much in the prompt and moving
signatures to the bottom results in a more consistent layout
between the prompts with signcount and the prompts without.

Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
2017-02-22 17:11:02 +01:00
Werner Koch
e3944f34e3
scd: Improve the prompts for OpenPGP cards.
* scd/app-openpgp.c (get_disp_name): New.
(get_disp_serialno): New.
(get_prompt_info): New.
(build_enter_admin_pin_prompt): Rework the prompt texts.  Factor some
code out to ...
(get_remaining_tries): New.
(verify_a_chv): Print a remaining counter also for the standard PIN.
Rework the prompt texts.

* agent/divert-scd.c (ask_for_card): Pretty format an OpenPGP serial
no.

Signed-off-by: Werner Koch <wk@gnupg.org>
2017-02-22 15:48:33 +01:00
Yuri Chornoivan
24cf0606b4 Clean up word replication.
--

This fixes extra word repetitions (like "the the" or "is is") in the
code and docs.

Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
2017-02-21 13:11:46 -05:00
NIIBE Yutaka
99d4dfe836 scd: Fix RESET command handling (more).
* scd/app-common.h (struct app_ctx_s): Add reset_requested.
* scd/app.c (app_reset): Locking APP, set reset_requested.
(deallocate_app): Release the lock.
(release_application): Add LOCKED_ALREADY argument.
(scd_update_reader_status_file): Hold the lock when accessing APP.
When reset_requested is set, close the reader and deallocate APP.
* scd/command.c (open_card_with_request, cmd_restart): Follow the
change of release_application.
(send_client_notifications): Here it calls release_application holding
the lock.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-02-17 11:50:40 +09:00
NIIBE Yutaka
7a666ccb44 scd: Minor fixes to silence compiler warnings.
* scd/app.c (app_reset): Initialize ERR.
* scd/scdaemon.c (scd_kick_the_loop, handle_connections): Catch the
return value.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-02-16 11:49:37 +09:00
NIIBE Yutaka
e2792813a5 scd: Fix RESET command handling.
* scd/app.c (release_application_internal): Remove.
(release_application): Merge release_application_internal.
(app_reset): Kick the loop and let close the reader.  Sleep is
required here to wait closing.
(scd_update_reader_status_file): When APP is no use, close it.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-02-15 18:23:01 +09:00
NIIBE Yutaka
da4c132cca scd: Fix use case of PC/SC.
* scd/apdu.c (apdu_open_reader): Add an argument APP_EMPTY.
When CCID driver fails to open, try PC/SC if APP is nothing.
* scd/app.c (select_application): Supply arg if APP is nothing.

--

After scanning available card readers by CCID driver, scdaemon should
try PC/SC service if no APP is registered yet.  Also, when the slot
is allocated for PC/SC (ccid.handle==NULL), it should not call
ccid_compare_BAI, otherwise scdaemon crashes.

Debian-bug-id: 852702, 854005, 854595, 854616

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-02-13 11:09:13 +09:00
NIIBE Yutaka
8ddc9268f6 scd: Fix regression tracking the connection count.
* scd/scdaemon.c (get_active_connection_count): New.
(start_connection_thread): Bump ACTIVE_CONNECTIONS up and down.
* scd/command.c (cmd_getinfo): Add subcommand "connections".

--

Apply gpg-agent change to scdaemon.  See the commit in 2016-08-06:
    40d16029ed

Then, add kicking the loop, so that main loop can notice the change of
the connection.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-02-01 08:58:01 +09:00
NIIBE Yutaka
e17fa5c75d scd: Remove --debug-disable-ticker option.
* scd/scdaemon.c (ticker_disabled): Remove.
(handle_tick, need_tick): Remove.
(handle_connections): Don't check ticker_disabled.

--

Now, removal of device/card is only done by the function
scd_update_reader_status_file, it should be called if needed.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-31 15:29:08 +09:00
NIIBE Yutaka
f08d37af04 scd: Fix SERIALNO for multiple devices.
* scd/app.c (select_application): Fix the logic if periodical check is
needed.  If it is needed for newly found device(s), kick the loop.
(scd_update_reader_status_file): Return value if select(2) should be
called with timeout.
* scd/ccid-driver.c (ccid_require_get_status): Don't return 0 for
token with no interrupt transfer for now.
* scd/command.c (open_card_with_request): Fix scan by SERIALNO.
* scd/scdaemon.c (update_usb): Remove.
(handle_connections): Evaluate need_tick after handle_tick.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-31 13:04:22 +09:00
NIIBE Yutaka
2a025039c1 scd: Fix GetSlotStatus.
* scd/apdu.c (get_status_reader): Add ON_WIRE arg, here.
(ct_get_status, pcsc_get_status_direct, pcsc_get_status_wrapped)
(pcsc_get_status, get_status_ccid, my_rapdu_get_status): Likewise.
(reset_pcsc_reader_wrapped, open_pcsc_reader_wrapped): Follow the
change.
(apdu_get_status_internal): It's lower-level driver which judge
it's not needed.  Otherwise, it can't detect the removal.
* scd/ccid-driver.c (ccid_slot_status): After the POWERED_OFF check,
we can skip sending GetSlotStatus packet on wire, when no need.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
Fixes-commit: c8eee4d396a751d41fd1ee1e1b87b851fca172a
2017-01-30 09:32:03 +09:00
NIIBE Yutaka
7c8eee4d39 scd: Don't send GET_STATUS packet if not needed.
* scd/apdu.c (apdu_get_status_internal): Add ON_WIRE arg.
(apdu_connect): Call apdu_get_status_internal with ON_WIRE enabled.
(apdu_get_status): For periodical check, call apdu_get_status_internal
with ON_WIRE disabled.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-30 09:05:37 +09:00
NIIBE Yutaka
216afba0d9 scd: Fix cancel INTERRUPT transfer.
* scd/ccid-driver.c (do_close_reader): Don't lock events, but check the
return value of libusb_cancel_transfer.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-30 08:19:32 +09:00
NIIBE Yutaka
f3d9b2582b scd: More changes on watching removal of card/reader.
* scd/app-common.h (struct app_ctx_s): Rename field to
periodical_check_needed.
* scd/scdaemon.c (update_usb): Rename from update_fdset_for_usb.
Don't use libusb_get_pollfds any more.
(scd_kick_the_loop): New.
(need_tick): Follow the rename.
(handle_connections): No libusb event handling here.
* scd/app.c (app_new_register): Follow the change of rename.
(select_application, scd_update_reader_status_file): Likewise.
* scd/ccid-driver.c (ccid_usb_thread_is_alive): New.
(intr_cb): Call scd_kick_the_loop.
(ccid_usb_thread): New.  Thread to invoke INTERRUPT callback.
(ccid_open_usb_reader): Add thread invocation.
(ccid_require_get_status): Remove
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP.
(do_close_reader): Carefully handle handle->transfer.
(get_escaped_usb_string): Insert npth_unprotect/npth_protect.
(do_close_reader, bulk_out, bulk_in, abort_cmd, ccid_slot_status)
(ccid_transceive, ccid_transceive_secure): Likewise.

--

It found that libusb_get_pollfds is not supported on Windows.
Besides, it's a bit difficult to use for the select loop.
Thus, we use the thread named ccid_usb_thread, instead.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-28 00:36:27 +09:00
NIIBE Yutaka
f92fe33f11 scd: Fix release of transfer object.
* scd/ccid-driver.c (intr_cb): Handle LIBUSB_TRANSFER_CANCELLED.
(do_close_reader): When callback is active, call
libusb_cancel_transfer and wait callback is fired off.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-27 22:32:12 +09:00
NIIBE Yutaka
25cc8575da scd: Improve watching USB device removal.
* scd/apdu.c(struct reader_table_s): Add require_get_status.
(apdu_connect): Change return value meaning.  Call apdu_reset here.
* scd/app.c (app_new_register): Add require_get_status.
(select_application): Use the return value of apdu_connect.
(scd_update_reader_status_file): Call update_fdset_for_usb with
checking all_have_intr_endp.
(app_list_start, app_list_finish): Remove.
* scd/ccid-driver.c (struct ccid_driver_s): Add transfer.
(intr_cb): Don't call libusb_transfer in this callback.
(ccid_require_get_status): New.
(do_close_reader): Call libusb_transfer here.
* scd/scdaemon.c (update_fdset_for_usb): Remove the first argument.

--

With Gnuk Token, it works fine as expected.  With Gemalto reader,
intr_cb is not called when card is removed.  So, the macro
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP is not defined yet.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-27 18:01:52 +09:00
NIIBE Yutaka
031e3fa7b9 scd: Wake up the select when new USB scan.
* scd/scdaemon.c (update_fdset_for_usb): Wake up the select(2).
(handle_connections): Use a kind of "self-pipe" technique.

--

Use pipe to wake up select(2).  If UNIX-only, signal could be used.  For
portability, "self-pipe" is better, here.  Setup for non-blocking for
pipe fds are not needed, because speed of USB device insertion is
limited by human physical interaction;  No one can do hundreds of
device insertion/removal-s per second.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-27 14:34:21 +09:00
NIIBE Yutaka
881dcdfd84 scd: Only submit apdu_get_status when needed.
* scd/apdu.c (apdu_dev_list_finish): Return Boolean value if
all device support INTERRUPT transfer.
* scd/ccid-driver.c (ccid_dev_scan_finish): Likewise.
* scd/app.c (app_new_register): Fix initial value of card_status.
(select_application): Call update_fdset_for_usb.
(scd_update_reader_status_file): Ditto.
* scd/scdaemon.c (update_fdset_for_usb, need_tick): New.
(handle_connections): Call handle_tick when select returns.
Let select watch USB file descriptors, too.
Call libusb_handle_events_timeout_completed for INTERRUPT transfer.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-26 22:02:41 +09:00
NIIBE Yutaka
9b06633c81 scd: Fix APP reference counting.
* scd/app.c (scd_update_reader_status_file): Don't call another
release_application_internal.
* scd/command.c (open_card_with_request): Don't require APPTYPE !=
NULL.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-26 19:32:51 +09:00
NIIBE Yutaka
bb5ceb78c3 scd: Add INTERRUPT endp support to CCID driver.
* scd/app.c (scd_update_reader_status_file): Fix releas of APP.
* scd/ccid-driver.c (struct ccid_driver_s): Add INTR_BUF.
(intr_cb, ccid_setup_intr): New.
(ccid_open_usb_reader): Call ccid_setup_intr.
(ccid_slot_status): Return CCID_DRIVER_ERR_NO_READER when removed.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-26 16:54:40 +09:00
Werner Koch
af5979a42b
Fix format string errors and some missing error case initialization.
* common/logging.c (do_logv): Remove extra parentheses in comparison.

* dirmngr/dns-stuff.c (resolve_addr_libdns): Init RES so that
dns_res_close is given a defined value in the error case.

* dirmngr/http.c (cookie_read, cookie_write) [HTTP_USE_NTBTLS]: Fix
format string char.

* dirmngr/ks-engine-hkp.c (ks_hkp_help): Remove duplicate "const".
* dirmngr/ks-engine-http.c (ks_http_help): Ditto.
* dirmngr/ks-engine-kdns.c (ks_kdns_help): Ditto.
* dirmngr/ks-engine-ldap.c (ks_ldap_help): Ditto.

* scd/app-p15.c (send_keypairinfo, do_getattr): Fix format string
char.
* tools/gpgconf-comp.c (gpg_agent_runtime_change): Init PID for the
error case.
(scdaemon_runtime_change): Ditto.
(dirmngr_runtime_change): Ditto.

* tools/gpgconf.c (query_swdb): Init VALUE_SIZE_UL.

Signed-off-by: Werner Koch <wk@gnupg.org>
2017-01-23 16:33:01 +01:00
NIIBE Yutaka
21c9ebb908 scd: Fix INTERRUPT transfer.
* scd/ccid-driver.c (find_endpoint): Don't return Bulk endpoint as
Interrupt endpoint.
(ccid_poll): Call libusb_interrupt_transfer.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-23 16:12:41 +09:00
NIIBE Yutaka
79cea89774 scd: Cleanup SERIALNO protocol.
* scd/app.c (app_get_serial_and_stamp): Remove.
(app_get_serialno): New.
(app_write_learn_status): Use send_status_direct.
(app_getattr): Use app_get_serialno for SERIALNO and
send with send_status_direct.
* scd/app-openpgp.c (do_getattr): Likewise.
* scd/command.c (cmd_serialno): Don't send TIMESTAMP of 0.
(cmd_learn): Likewise.  Don't inquire with TIMESTAMP of 0.

--

In the SERIALNO protocol, timestamp used to be considered, but had never
used at all.  In the new implementation, removed card/token is always
detected and connection becomes invalid, no timestamp is required any
more.  Examined scute and poldi as well for this protocol change.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-18 16:03:47 +09:00
NIIBE Yutaka
8b1f24a29e scd: Add "card_list" sub command for GETINFO.
* scd/app.c (app_send_card_list): New.
* scd/command.c (cmd_getinfo): Fix "status" sub command.
Add "card_list" sub command.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-18 15:19:38 +09:00
NIIBE Yutaka
2e6f1c99d4 scd: Add --demand option for SERIALNO.
* scd/app.c (select_application): Add SERIALNO_BIN and SERIALNO_BIN_LEN
arguments.  Return matched APP with a serial number when specified.
* scd/command.c (open_card): Modify for the implicit open only.
(open_card_with_request): New for explicit open and support match with a
serial number.
(cmd_serialno): Support --demand option.
(cmd_learn, cmd_readcert, cmd_readkey, cmd_pksign, cmd_pkauth)
(cmd_pkdecrypt, cmd_getattr, cmd_setattr, cmd_writecert, cmd_writekey)
(cmd_genkey, cmd_random, cmd_passwd, cmd_checkpin, cmd_apdu): Follow
the change of open_card.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-16 10:26:16 +09:00
NIIBE Yutaka
858e14cd79 scd: Fix for --disable-ccid for scdaemon.
* scd/apdu.c (apdu_dev_list_finish): Don't call ccid_dev_scan_finish
with no table.
(apdu_open_reader): Only increment when it's zero.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-06 10:35:46 +09:00
NIIBE Yutaka
62268a2732 scd: Fix for --disable-ccid-driver.
* scd/apdu.c [HAVE_LIBUSB] (apdu_dev_list_start): Conditionalize.
[HAVE_LIBUSB] (apdu_dev_list_finish, apdu_open_reader): Likewise.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-06 10:07:40 +09:00
NIIBE Yutaka
8a41e73c31 scd: Support multiple readers by CCID driver.
* scd/apdu.c (new_reader_slot): Lock is now in apdu_dev_list_start.
(close_pcsc_reader_direct, close_ccid_reader): RDRNAME is handled...
(apdu_close_reader): ... by this function now.
(apdu_prepare_exit): Likewise.
(open_ccid_reader): Open with dev_list.
(apdu_dev_list_start, apdu_dev_list_finish): New.
(apdu_open_one_reader): New.
(apdu_open_reader): Support multiple readers.
* scd/app.c (select_application): With SCAN, opening all readers
available, and register as new APP.
(app_write_learn_status): app->ref_count == 0 is valid for APP which is
not yet used.
(app_list_start, app_list_finish): New.
* scd/ccid-driver.c (struct ccid_driver_s): Remove RID and BCD_DEVICE.
Add BAI.
(parse_ccid_descriptor): BCD_DEVICE is now on the arguments.
(ccid_dev_scan, ccid_dev_scan_finish): New.
(ccid_get_BAI, ccid_compare_BAI, ccid_open_usb_reader): New.
(ccid_open_reader): Support multiple readers.
(ccid_set_progress_cb, ccid_close_reader): No RID any more.
--

With this change, multiple readers/tokens are supported by the internal
CCID driver of GnuPG.  Until the changes of upper layers (scdaemon,
gpg-agent, and gpg front end), only a single reader is used, though.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2017-01-06 09:47:31 +09:00
Werner Koch
6b84ecbf31
Replace use of variable-length-arrays.
* common/t-iobuf.c (main): Replace variable-length-array.
* g10/gpgcompose.c (mksubpkt_callback): Ditto.
(encrypted): Ditto.
* g10/t-stutter.c (log_hexdump): Ditto.
(oracle_test): Ditto.
* g10/tofu.c (get_policy): Ditto.  Use "%zu" for size_t.
* scd/app-openpgp.c (ecc_writekey): Replace variable-length-array.
Check for zero length OID_LEN.

Signed-off-by: Werner Koch <wk@gnupg.org>
2017-01-02 13:29:18 +01:00
NIIBE Yutaka
337690441f scd: Fix select_application.
* scd/app.c (select_application): Fix the condition for open.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-12-30 15:17:50 +09:00
NIIBE Yutaka
f300e12a79 scd: Fix card removal monitor.
* scd/app.c (app_reset): Call send_client_notification with REMOVAL.
(scd_update_reader_status_file): Likewise.
* scd/command.c (send_client_notifications): Distinguish removal.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-12-30 13:17:49 +09:00
NIIBE Yutaka
cdc8d0bd93 scd: Improve internal CCID driver.
* scd/ccid-driver.c (scan_or_find_usb_device): Don't scan for
configuration but use active configuration.  Support alt_setting.
(scan_or_find_devices): Support alt_setting.
(ccid_open_reader): Support alt_setting.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-12-29 11:31:25 +09:00
NIIBE Yutaka
c48cf7e32f scd: Fix a race condition for new_reader_slot.
* scd/apdu.c (reader_table_lock, apdu_init): New.
(new_reader_slot): Serialize by reader_table_lock.
* scd/app.c (lock_app, unlock_app, app_new_register): Fix error code
usage.
(initialize_module_command): Call apdu_init.
* scd/scdaemon.c (main): Handle error for initialize_module_command.

--

This is a long standing bug.  There are two different things; The
serialization of allocating a new SLOT, and the serialization of using
the SLOT.  The latter was implemented in new_reader_slot by lock_slot.
However, the former was not done.  Thus, there was a possible race where
a same SLOT is allocated to multiple threads.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-12-29 10:07:43 +09:00
NIIBE Yutaka
4cc9fc5eb9 scd: APP centric approach for device management.
* scd/app.c (lock_app): Rename from lock_reader and use internal field
of APP.
(unlock_app): Likewise.
(app_dump_state): Use APP.
(application_notify_card_reset): Remove.
(check_conflict): Change API for APP, instead of SLOT.
(check_application_conflict): Likewise.
(release_application_internal): New.
(app_reset): New.
(app_new_register): New.
(select_application): Change API for APP, instead of SLOT.
(deallocate_app, release_application): Modify for manage link.
(report_change): New.
(scd_update_reader_status_file): Moved from command.c and
use APP list, instead of VREADER.
(initialize_module_command): Moved from command.c.

* scd/command.c (TEST_CARD_REMOVAL): Remove.
(IS_LOCKED): Simplify.
(vreader_table): Remove.
(vreader_slot, update_card_removed): Remove.
(do_reset): Call app_reset.
(get_current_reader): Remove.
(open_card): Add SCAN arg.
(cmd_serialno): No retry, since retry is done in lower layer in apdu.c.
No do_reset, since it is done in lower layer.
Add clearing card_removed flag.
(cmd_disconnect): Call apdu_disconnect.
(send_client_notifications): Modify for APP.
(update_reader_status_file): Remove.

--

APP is the abstraction of the card application.  For management of
cards, it is better to focus on the APP instead of the physical reader.
This change makes support of multiple card/token easier.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-12-28 12:29:17 +09:00
NIIBE Yutaka
f9882d8336 scd: Simplify monitoring card removal.
* scd/apdu.c (struct reader_table_s): Remove any_status, last_status,
status, and change_counter field.
(new_reader_slot, dump_reader_status, ct_activate_card, open_ct_reader)
(connect_pcsc_card, open_pcsc_reader_direct, open_pcsc_reader_wrapped)
(open_ccid_reader, apdu_reset): Follow the change.
(ct_dump_reader_status): Remove.
(apdu_get_status_internal, apdu_get_status): Remove CHANGED arg.
(apdu_connect): Follow the change.
* scd/command.c (struct vreader_s): Remove reset_failed, any, and
changed field.
(cmd_getinfo, update_reader_status_file): Follow the change.

--

In the past, scdaemon monitors card insertion (as well as removal), so
the code has been complicated, and there has been duplication in two
layers.  Now, it only monitors card removal, it's now simplified.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-12-28 11:14:29 +09:00
NIIBE Yutaka
c7ec9c4224 scd: Improve internal CCID driver.
* scd/ccid-driver.c (scan_or_find_usb_device): Fix return value.
Support device with multiple CCID interfaces.  Fix the case with
READERNO.  Support partial string match of "reader-port" like PC/SC
driver.

--

I don't know any device with multiple CCID interfaces, though.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-12-27 11:58:54 +09:00
NIIBE Yutaka
8431f5a7e8 scd: Clean up internal API for APP.
* scd/app-common.h (app_readcert, app_readkey, app_setattr, app_sign,
app_auth, app_decipher, app_get_challenge, app_check_pin): Add CTRL as
the second argument.
* scd/app.c: Supply CTRL to lock_reader calls.
* scd/command.c (cmd_readcert, cmd_readkey, cmd_pksign, cmd_auth,
cmd_pkdecrypt, cmd_setattr, cmd_random, cmd_checkpin): Follow the
change.

--

APP is an abstraction of the "card application".  Most methods of APP
should have CTRL argument to report back progress to the session.  This
change fixes FIXMEs for missing CTRL.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-12-22 21:14:26 +09:00
Werner Koch
e384405b6e
Remove unused debug flags and add "dns" and "network".
* g10/options.h (DBG_CARD_IO_VALUE, DBG_CARD_IO): Remove.
* g10/gpg.c (debug_flags): Remove "cardio".
* agent/agent.h (DBG_COMMAND_VALUE, DBG_COMMAND): Remove.
* agent/gpg-agent.c (debug_flags): Remove "command".
* scd/scdaemon.h (DBG_COMMAND_VALUE, DBG_COMMAND): Remove.
* scd/scdaemon.c (debug_flags): Remove "command".
* dirmngr/dirmngr.h (DBG_DNS_VALUE, DBG_DNS): New.
(DBG_NETWORK_VALUE, DNG_NETWORK): New.
* dirmngr/dirmngr.c (debug_flags): Add "dns" and "network".
--

Note that "dns" and "network" are not yet used but will soon be added
to dirmngr.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-12-19 09:41:15 +01:00
Werner Koch
ce29272e24
gpg: New option --default-new-key-algo.
* common/openpgp-oid.c (openpgp_is_curve_supported): Add optional arg
R_ALGO and change all callers.
* common/util.h (GPG_ERR_UNKNOWN_FLAG): New error code.
* g10/options.h (struct opt): Add field DEF_NEW_KEY_ALGO.
* g10/gpg.c (oDefaultNewKeyAlgo): New enum.
(opts): New option "--default-new-key-algo".
(main): Set the option.
* g10/keygen.c: Remove DEFAULT_STD_ FUTURE_STD_ constants and replace
them by ...
(DEFAULT_STD_KEY_PARAM, FUTURE_STD_KEY_PARAM): new string constants.
(get_keysize_range): Remove arg R_DEF and return that value instead.
Change all callers.
(gen_rsa): Use get_keysize_range instead of the removed
DEFAULT_STD_KEYSIZE.
(parse_key_parameter_part): New function.
(parse_key_parameter_string): New function.
(quick_generate_keypair): Refactor using parse_key_parameter_string.
(generate_keypair): Ditto.
(parse_algo_usage_expire): Ditto.
--

This new option is intended to be used in the forthcoming
--set-profile command of gpgconf.  It allows to provide a gpg
configuration with custom defaults for a new key using the simple
commands which use the default algorithm set.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-12-02 19:47:40 +01:00
NIIBE Yutaka
b89e63e5c3 scd: Support OpenPGP card V3 for RSA.
* scd/app-openpgp.c (struct app_local_s): Remove max_cmd_data and
max_rsp_data fields as Extended Capabilities bits are different.
(get_cached_data) Use extcap.max_certlen_3.
(get_one_do): Don't use exmode=1.
(determine_rsa_response): New.
(get_public_key, do_genkey): Call determine_rsa_response.
(do_sign): Use keyattr[0].rsa.n_bits / 8, instead of max_rsp_data.
(do_auth): Use keyattr[2].rsa.n_bits / 8, instead of max_rsp_data.
(do_decipher): Likewise with Use keyattr[1].rsa.n_bits / 8.
(show_caps): Remove max_cmd_data and max_rsp_data.
(app_select_openpgp): Likewise.

--

OpenPGP card V3 had introduced incompatible change in Extended
Capabilities bits.  We can work around by this change by not
using those bits.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-11-25 16:35:15 +09:00
NIIBE Yutaka
5c2db9dedf scd: Fix receive buffer size.
* scd/apdu.c (send_le): Fix the size, adding two for status
bytes to Le.

--

This is long standing bug.  So far, Le was not exact value.
Since forthcoming change will introduce exact value of expected length
of response data, this change is needed.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-11-22 20:53:57 +09:00
NIIBE Yutaka
b6066ab18a scd: Don't limit to ST-2xxx for PC/SC.
* scd/apdu.c (pcsc_vendor_specific_init): Only check vender ID.

--

Some other products by Cherry works with pinpad, although it only works
for smaller keys (RSA 1024).  TPDU support is good for larger keys.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-11-18 08:54:04 +09:00
Werner Koch
4839e6d002
scd,dirmngr: Keep the standard fds when daemonizing.
* dirmngr/dirmngr.c (main): Before calling setsid do not close the
standard fds but connect them to /dev/null.
* scd/scdaemon.c (main): Ditto.  Noet that the old test for a log
stream was even reverted.

--

Note that this was fixed for gpg-agent 10 years ago on 2006-11-09.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-11-16 21:17:47 +01:00
NIIBE Yutaka
4ee4d0b021 scd: Fix status info encoding.
* scd/command.c (send_status_info): Do percent plus encoding correctly.

--

Reported-by: David Härdeman <david@hardeman.nu>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-11-14 10:25:43 +09:00
Werner Koch
4d7dc432b5
Change all http://www.gnu.org in license notices to https://
--
2016-11-05 12:02:19 +01:00
NIIBE Yutaka
cd00b07ec2 scd: Fix length error for READKEY.
* scd/app-openpgp.c (do_readkey): Decrement the length.

--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-11-04 15:34:35 +09:00
NIIBE Yutaka
f9da935c3e scd: Add --advanced option for READKEY.
* scd/command.c (cmd_readkey) : Support ADVANCED arg.
* scd/app.c (app_readcert): Add ADVANCED arg.
* scd/app-openpgp.c (do_readkey): Implement ADVANCED arg.
* scd/app-nks.c (do_readkey): Error return with GPG_ERR_NOT_SUPPORTED.

--
"SCD READKEY --advanced OPENPGP.3" returns key in advanced format.
With this suport, poldi-ctrl will be no longer needed.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-11-04 13:45:57 +09:00
Daniel Kahn Gillmor
68b59bbc42 Spelling: correct spelling of "passphrase".
There were several different variant spellings of "passphrase".  This
should fix them all for all English text.

I did notice that po/it.po contains multiple instances of
"passhprase", which also looks suspect to me, but i do not know
Italian, so i did not try to correct it.

Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
2016-11-02 12:53:58 +01:00
Justus Winter
445f0c13d7 Fix typos.
--
Signed-off-by: Justus Winter <justus@g10code.com>
2016-10-27 14:59:56 +02:00
NIIBE Yutaka
6bbd97d6c7 scd: Add 0x41 prefix for x-coordinate only result.
* scd/app-openpgp.c (do_decipher): When it's x-coordinate only, add the
prefix 0x41.

--
Card should return fixed size bytes, either in format of
(04 || X || Y) or (X, x-coordinate only).

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-10-27 13:04:29 +09:00
NIIBE Yutaka
b1828c17fc scd: Use canonical curve name of libgcrypt.
* scd/app-openpgp.c (send_key_attr): Use curve instead of OID.
(ecdh_params): New.
(ecc_read_pubkey): Use ecdh_params.  Use curve name.
(ecc_writekey): Likewise.
(ecc_curve): Rename from ecc_oid.
(parse_algorithm_attribute): Use ecc_curve.
* g10/call-agent.c (learn_status_cb): Use openpgp_is_curve_supported to
intern the curve name string.
* g10/card-util.c (card_status): Conver curve name to alias for print.
--
Now, sdcaemon answer for KEY-ATTR is in the canonical curve name
instead of the alias.  Since it is used of key generation for
card encryption key with backup, it should be canonical name.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-10-24 11:22:44 +09:00
NIIBE Yutaka
d2653b1a6d g10,scd: Fix ECC keygen.
* g10/keygen.c (generate_keypair): For card key generation, fill
parameters by KEY-ATTR.

* scd/app-openpgp.c (ecc_read_pubkey): OID should be freed at last,
after its reference by OIDBUF is finished.
(ecc_writekey): Likewise.
--

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-10-21 21:37:04 +09:00
NIIBE Yutaka
693e657ff0 scd: Fix segfault changing key attr.
* asc/app-openpgp.c (change_keyattr_from_string): Release after
allocated.
--

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-10-21 16:27:46 +09:00
NIIBE Yutaka
6e85ac77af Fix use cases of snprintf.
* agent/call-pinentry.c, agent/call-scd.c, agent/command.c,
build-aux/speedo/w32/g4wihelp.c, common/get-passphrase.c,
dirmngr/dirmngr.c, g10/call-agent.c, g10/cpr.c, g10/keygen.c,
g10/openfile.c, g10/passphrase.c, scd/app-openpgp.c, scd/scdaemon.c,
sm/call-agent.c, sm/call-dirmngr.c, sm/certreqgen.c: Fix assuming C99.

--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-10-21 12:04:46 +09:00
NIIBE Yutaka
b680f79cc1 scd: GENKEY updates the public key in APP.
* scd/app-openpgp.c (rsa_read_pubkey, ecc_read_pubkey): New.
(read_public_key): New.
(get_public_key, do_genkey): Use read_public_key.

--

With this change, since GENKEY updates the public key (pk[keyno].key) in
APP, READKEY will be possible after the command even for the old
card (version <= 0x0100).

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-10-20 16:25:47 +09:00
NIIBE Yutaka
34439da2d6 scd: Support ECC key generation.
* scd/app-openpgp.c (get_public_key): Fix a message.
(change_keyattr_from_string, ecc_writekey): Call mpi_release sooner.
(do_genkey): Add ECC support.

--

In OpenPGP card specification 3.0, ECC is introduced.  So far, do_genkey
only supported RSA.  Since KDF spec. is needed to calculate the
fingerprint, it is hard coded in app-openpgp.c.  But it's defined by
OpenPGP ECC (RFC-6637), and card does nothing with KDF in fact.

Co-authored-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-10-18 22:58:00 +09:00
NIIBE Yutaka
f1845f25db scd: minor cleanup to merge other works.
* scd/iso7816.c (do_generate_keypair): Use const char * for DATA.
(iso7816_generate_keypair, iso7816_read_public_key): Likewise.
* scd/app-openpgp.c (get_public_key): Follow the change.
(do_genkey): Ditto.  Use ERR instead of RC.  Use u32 for CREATED_AT.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-10-18 20:48:08 +09:00
NIIBE Yutaka
25428be521 scd: Fix keytocard for ECC.
* scd/app-openpgp.c (build_ecc_privkey_template): Size can be greater
than 128 when it comes with public key for curve of larger field.

--

Reported-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-10-17 12:02:28 +09:00
NIIBE Yutaka
fc0b392e76 agent, dirmngr, scd: Fix init_common_subsystems.
* common/init.c (_init_common_subsystems): Don't call
gpgrt_set_syscall_clamp in this function.
* agent/gpg-agent.c, dirmngr/dirmngr.c, scd/scdaemon.c: Call
gpgrt_set_syscall_clamp after npth_init.

--

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-10-07 10:45:22 +09:00
NIIBE Yutaka
eda17649f8 agent, dirmngr, scd: npth_init must be after fork.
* agent/gpg-agent.c (thread_init_once, initialize_modules): New.
(main): Make sure no daemonizing-fork call after npth_init, and no npth
calls before npth_init, with care of npth calls by assuan hooks.
* dirmngr/dirmngr.c (thread_init): New.
(main): Make sure npth_init must not be called before daemonizing fork.
* scd/scdaemon.c (main): Likewise.

--

It is simply the best for nPth not to allow the daemonizing fork after
npth_init, because semantics and implementations of forked child process
in a threaded application is a difficult corner case.

GnuPG-bug-id: 1779
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-10-04 09:01:13 +09:00
NIIBE Yutaka
dd06d33655 scd: Add support of ECC pubkey attribute.
* scd/app-openpgp.c (ECC_FLAG_PUBKEY): New.
(send_key_attr, get_public_key, ecc_writekey, do_auth, do_decipher)
(parse_algorithm_attribute): Check ECC_FLAG_DJB_TWEAK.
(build_ecc_privkey_template): Add ECC_Q and ECC_Q_LEN.
Support offering public key when ECC_FLAG_PUBKEY sets.
(ecc_writekey): Supply ECC_Q and ECC_Q_LEN.
(parse_algorithm_attribute): Parse pubkey-required byte.

--

OpenPGPcard protocol specification version 3.2 supports algorithm
attributes for ECC key which specifies public key data is required for
"keytocard" command.  This change supports the feature.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-09-16 15:36:45 +09:00
Werner Koch
0ac671f8a2
common: Add an assuan logging monitor.
* common/asshelp.c (my_log_monitor): New var.
(my_libassuan_log_handler): Run that monitor.
(setup_libassuan_logging): Add arg to set a log monitor and change all
callers.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-09-05 11:58:48 +02:00
NIIBE Yutaka
f9e49c80e7 scd: Fix an action after card removal.
* scd/command.c (update_card_removed): Call apdu_close_reader here.

--

This is update of the commit 8fe8105576
It is better apdu_close_reader is called in update_card_removed.

The commit 1598a44764 introduced a
regression, it doesn't close the reader after removal of the card, while
the code before the commit call apdu_close_reader in do_reset.
So, this fix.

GnuPG-bug-id: 2449
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-09-03 15:27:30 +09:00
NIIBE Yutaka
8fe8105576 scd: Release the card reader after card removal.
* scd/command.c (update_reader_status_file): Call apdu_close_reader.

--

GnuPG-bug-id: 2651
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-09-02 14:45:26 +09:00
NIIBE Yutaka
d1ae710335 scd: Clean up unused shutdown method.
* scd/apdu.c (shutdown_ccid_reader, apdu_shutdown_reader): Remove.
(reset_ccid_reader): Don't set shutdown_reader.
* scd/ccid-driver.c (ccid_shutdown_reader): Remove.

--

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-09-02 13:58:33 +09:00
Daniel Kahn Gillmor
61c2a1fa6d
Call log_set_prefix() with human-readable labels.
* agent/preset-passphrase.c, agent/protect-tool.c, dirmngr/dirmngr.c
* dirmngr/t-http.c, g10/gpg.c, g10/gpgv.c, g13/g13-syshelp.c
* g13/g13.c, kbx/kbxutil.c, scd/scdaemon.c, sm/gpgsm.c
* tests/gpgscm/main.c, tools/gpg-check-pattern.c
* tools/gpg-connect-agent.c, tools/gpgconf.c, tools/gpgtar.c
* tools/symcryptrun.c: Invoke log_set_prefix() with
human-readable labels.

--

Some invocations of log_set_prefix() were done with raw numeric values
instead of values that humans can understand.  Use symbolic
representations instead of numeric for better readability.

Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
2016-08-12 12:16:19 +02:00
Ben Kibbey
49829c29e5 Cleanup initialization of libgcrypt.
* common/init.c (init_common_subsystems): Initialize libgcrypt.
* dirmngr/Makefile.am (dirmngr_ldap): Link with libgcrypt.

--
Most other modules already call gcry_check_version() after
init_common_subsystems() so may as well move initialization of libgcrypt
to here. Also fixes a warning in the system log from gpgconf --homedir.

Signed-off-by: Ben Kibbey <bjk@luxsci.net>
2016-08-09 10:47:46 +02:00
Daniel Kahn Gillmor
dc107b7850 More cleanup of "allow to".
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
  common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
  dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
  doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
  doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
  g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
  m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
  po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
  po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
  po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
  po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
  scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
  sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
  with clearer text.

In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something.  When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.

These changes should make the language a bit clearer.

Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
2016-08-03 16:55:33 +02:00
NIIBE Yutaka
1598a44764 scd: Fix card removal/reset on multiple contexts.
* scd/app.c (application_notify_card_reset): Add message for debug.
*scd/command.c (update_card_removed): Call release_application and set
SLOT -1 here.
(struct server_local_s): Remove app_ctx_marked_for_release.
(do_reset): Don't mark release but call release_application here.
(open_card): Remove app_ctx_marked_for_release handling.
(update_reader_status_file): Don't set SLOT here, so that it can be
released the APP by application_notify_card_reset in
update_card_removed.
--

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-07-20 11:35:05 +09:00
NIIBE Yutaka
0c1fd4e988 scd: Fix race conditions for release_application.
* scd/command.c (do_reset, cmd_restart): Reset app_ctx before calling
release_application.

--

Thanks to Ben Warren for the report.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-07-19 10:53:39 +09:00
Niibe Yutaka
971064f8b7 scd: Reset nonnull_nad to zero for VENDOR_GEMPC.
* (parse_ccid_descriptor): nonnull_nad = 0 for all GEMPC device.

--

We can't use the driver for 08E6:3438, while it works well under PC/SC
service.  I found that the library of ccid always uses the node
address = ZERO for all transactions.  So, we extend the same handling
for not only GEMPC_CT30, but also for all its devices.

Debian-bug-id: 814584
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-06-19 11:24:50 +09:00
Werner Koch
4e41745b3e
scd: Make option --homedir work.
* scd/scdaemon.c (opts): Add --homedir.
--

Without that entry the homedir setting won't work.

GnuPG-bug-id: 2386
Signed-off-by: Werner Koch <wk@gnupg.org>
2016-06-17 08:36:07 +02:00
Werner Koch
8127043d54
Explicitly restrict socket permissions.
* agent/gpg-agent.c (create_server_socket): Call chmod before listen.
* scd/scdaemon.c (create_server_socket): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
--

This is just in case of a improperly set umask.  Note that a connect
requires a write permissions.
2016-06-08 16:18:02 +02:00
Werner Koch
6790115fd9
w32: Fix recent build regression.
* common/homedir.c (_gnupg_socketdir_internal) [W32]: Add definition
for NAME.
* g10/gpg.c (main) [W32]:  Fix use og gnupg_homedir.

* agent/gpg-agent.c (remove_socket): Remove unused var P.
* scd/scdaemon.c (cleanup): Ditto.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-06-08 15:14:06 +02:00
Werner Koch
0faf895154
Do not try to remove the enclosing directory of sockets.
* agent/gpg-agent.c (remove_socket): Do not remove the enclosing
directory.
* scd/scdaemon.c (cleanup): Ditto.

--

The socket directory is now below /run or at ~/.gnupg.  Thus we should
not try to remove the directory of the socket.  The auto-removal was
introduced at a time we used a temporary directory for the sockets.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-06-08 09:04:29 +02:00
Werner Koch
36550dde99
common: New function gnupg_socketdir.
* common/homedir.c (gnupg_socketdir): New.
* agent/gpg-agent.c (create_socket_name): Use new function instead of
gnupg_homedir.
(check_own_socket): Ditto.
(check_for_running_agent): Ditto.
* agent/preset-passphrase.c (main): Ditto.
* common/asshelp.c (start_new_gpg_agent): Ditto.
* scd/scdaemon.c (create_socket_name): Ditto.
* tools/gpgconf.c (main): Ditto.
* tools/symcryptrun.c (main): Ditto.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-06-07 13:48:46 +02:00
Werner Koch
22a7ef01aa
Replace use of opt.homedir by accessor functions.
* common/homedir.c (the_gnupg_homedir): New var.
(gnupg_set_homedir): New.
(gnupg_homedir): New.
* g10/options.h (struct opt): Remove 'homedir' and replace all users
by the new accessor functions.
* g13/g13-common.h (struct opt): Ditto.
* scd/scdaemon.h (struct opt): Ditto.
* sm/gpgsm.h (struct opt): Ditto.
* dirmngr/dirmngr.h (struct opt): Ditto.
* agent/preset-passphrase.c (opt_homedir): Ditto.
* agent/protect-tool.c (opt_homedir): Ditto.
--

This will make detection of a non-default homedir easier.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-06-07 10:59:46 +02:00
NIIBE Yutaka
6677d8b614 scd: More fix of error return path.
* scd/command.c (open_card): Return GPG_ERR_ENODEV on the failure of
apdu_connect.

--

GnuPG-bug-id: 2306
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-05-02 15:59:22 +09:00
NIIBE Yutaka
cb4fee8bb6 scd: Fix error return path.
* scd/ccid-driver.c (bulk_in): Remove EAGAIN handling.
Handle LIBUSB_ERROR_NO_DEVICE to return CCID_DRIVER_ERR_NO_READER.

--

GnuPG-bug-id: 2306
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-04-28 12:43:48 +09:00
NIIBE Yutaka
508b0deb70 scd: Fix memory leaks.
* scd/ccid-driver.c (scan_or_find_usb_device): Return on
LIBUSB_ERROR_NO_MEM.  Free CONFIG before return except on error.
(scan_or_find_devices): Free device list.

--

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-04-28 00:08:08 +09:00
NIIBE Yutaka
7a32f87ccc scd: Bug fix for a device with multiple interfaces.
* scd/ccid-driver.c (scan_or_find_usb_device): Use IFC_NO when
accessing interface information.

--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-03-07 20:12:38 +09:00
Justus Winter
e77c85577d common: Consolidate Assuan server argument handling.
* common/Makefile.am (common_sources): Add new files.
* common/server-help.c: New file.
* common/server-help.h: Likewise.
* agent/command.c: Drop argument handling primitives in favor of using
the consolidated ones.
* dirmngr/server.c: Likewise.
* g10/server.c: Likewise.
* g13/server.c: Likewise.
* scd/command.c: Likewise.
* sm/server.c: Likewise.

Signed-off-by: Justus Winter <justus@g10code.com>
2016-03-02 14:14:33 +01:00
Werner Koch
3d952a2fe5
scd: Fix size_t/int mismatch in libusb
* scd/ccid-driver.c (bulk_in, abort_cmd, ccid_poll): Change msglen to
int.
--

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-01-27 14:31:13 +01:00
NIIBE Yutaka
d0d9708970 scd: Migrate to new API of libusb 1.0.
* configure.ac (LIBUSB_CPPFLAGS): New.
* scd/Makefile.am (AM_CPPFLAGS): Add LIBUSB_CPPFLAGS.
* scd/ccid-driver.c: Use libusb 1.0 API.
--

Changes are straightforward, not use any new features.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-01-27 12:24:05 +09:00
Werner Koch
437965e562
Use ngettext for some strings.
* scd/app-openpgp.c (build_enter_admin_pin_prompt): Use ngettext for
some diagnostics.
(do_genkey): Ditto.
* g10/keyedit.c (check_all_keysigs, menu_delsig, menu_clean): Ditto.
* g10/keylist.c (print_signature_stats): Ditto.
* g10/keyserver.c (keyserver_refresh): Ditto.
* g10/sig-check.c (check_signature_metadata_validity): Ditto.
* g10/sign.c (do_sign): Ditto.
* g10/trustdb.c (reset_trust_records): Ditto.
(validate_keys): Use a table like diagnostic output.
--

Suggested-by: Ineiev <ineiev@gnu.org>
Signed-off-by: Werner Koch <wk@gnupg.org>
2016-01-18 11:20:15 +01:00
NIIBE Yutaka
d40975cbe8 scd: Fix regression for generating RSA keys on card.
* scd/app-openpgp.c (do_genkey): Strip leading zeros for fingerprint
computation.

--

This bug is difficult to reproduce because the probability is 1/256,
and key generation takes long time.  The regression was introduced
when we add the support for ECC.

GnuPG-bug-id: 2150
2015-12-14 14:37:18 +09:00
Daniel Hoffend
d1a97585c5 scd: Fix removal of unplugged usb readers on Windows.
* scd/apdu.c (pcsc_error_to_sw): map PCSC_E_NO_SERVICE and
PCSC_E_SERVICE_STOPPED to the internal SW_HOST_NO_READER error code.

--

Signed-off-by: Daniel Hoffend <dh@dotlan.net>
GnuPG-bug-id: 2167

In Windows 8 (and later), PC/SC service only runs when reader/token is
plugged in.  After its removal, it returns PCSC_E_NO_SERVICE error.
This error should be handled as no reader.  This comment is by gniibe.
2015-12-10 11:02:16 +09:00
NIIBE Yutaka
f03976f110 scd: Fix for removing the prefix.
* scd/app-openopg.c (do_decipher): Fix the condition.
2015-12-04 14:37:05 +09:00