* g10/keydb.h (struct kbnode_struct): Replace unused field RECNO by
new field TAG.
* g10/kbnode.c (alloc_node): Change accordingly.
* g10/import.c (import_one): Add arg r_valid.
(sec_to_pub_keyblock): Set tags.
(resync_sec_with_pub_keyblock): New.
(import_secret_one): Change return code to gpg_error_t. Return an
error code if sec_to_pub_keyblock failed. Resync secret keyblock.
--
When importing an invalid secret key ring for example without key
binding signatures or no UIDs, gpg used to let gpg-agent store the
secret keys anyway. This is clearly a bug because the diagnostics
before claimed that for example the subkeys have been skipped.
Importing the secret key parameters then anyway is surprising in
particular because a gpg -k does not show the key. After importing
the public key the secret keys suddenly showed up.
This changes the behaviour of
GnuPG-bug-id: 4392
to me more consistent but is not a solution to the actual bug.
Caution: The ecc.scm test now fails because two of the sample keys
don't have binding signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (show_basic_key_info): New arg 'print_sec'. Remove
useless code for "sub" and "ssb".
* g10/import.c (import_one): Pass FROM_SK to show_basic_key_info. Do
not print the first keyinfo in FROM_SK mode.
printing.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (write_status_printf): Escape CR and LF.
* g10/import.c (print_import_check): Simplify by using
write_status_printf and hexfingerprint.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR16)
(KEYDB_SEARCH_MODE_FPR20, KEYDB_SEARCH_MODE_FPR32): Remove. Switch
all users to KEYDB_SEARCH_MODE_FPR along with the fprlen value.
--
These search modes were added over time and there has until recently
be no incentive to remove the cruft. With the change for v5 keys I
finally went over all places and allowed the generic fingerprint mode
along with a given length of the fingerprint at all places.
Consequently the other modes can now be removed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (set_compliance_option, main): Change CO_GNUPG to include
rfc4880bis features.
(main): Change rfc4880bis warning to a note.
--
Note that the default is CO_GNUPG and not CO_OPENPGP. CO_OPENPGP does
not include rfc4880bis yet and has a couple of things we don't like,
like --allow-non-selfsigned-uids.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/build-packet.c (gpg_mpi_write): New optional arg
R_NWRITTEN. Allow NULL for OUT. Change all callers.
(do_key): Support v5 keys.
(build_sig_subpkt_from_sig): Support 32 byte fingerprints.
* g10/parse-packet.c (parse_signature): First try to set the keyid
from the issuer fingerprint.
(parse_key): Support v5 keys.
(create_gpg_control): Better make sure to always allocate the static
size of the struct in case future compilers print warnings.
* g10/keyid.c (hash_public_key): Add v5 support.
(keyid_from_pk): Ditto.
(keyid_from_fingerprint): Ditto.
(fingerprint_from_pk): Ditto.
* g10/keygen.c (KEYGEN_FLAG_CREATE_V5_KEY): New.
(pVERSION, pSUBVERSION): New.
(add_feature_v5): New.
(keygen_upd_std_prefs): Call it.
(do_create_from_keygrip): Add arg keygen_flags and support the v5
flag.
(common_gen): Support the v5 flag.
(parse_key_parameter_part): New flags v4 and v5.
(parse_key_parameter_string): Add args for version and subversion.
(read_parameter_file): New keywords "Key-Version" and
"Subkey-Version".
(quickgen_set_para): Add arg 'version'.
(quick_generate_keypair, generate_keypair): Support version parms.
(do_generate_keypair): Support v5 key flag.
(generate_subkeypair): Ditto.
(generate_card_subkeypair): Preparse for keyflags.
(gen_card_key): Ditto.
* g10/sig-check.c (check_signature2): Add args extrahash and
extrahashlen.
(check_signature_end): Ditto.
(check_signature_end_simple): Ditto. Use them.
* g10/mainproc.c (proc_plaintext): Put extra hash infor into the
control packet.
(do_check_sig): Add args extrahas and extrahashlen and pass them on.
(issuer_fpr_raw): Support 32 byte fingerprint.
(check_sig_and_print): get extra hash data and pass it on.
--
Note that this is only basic support and requires more fine
tuning/fixing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/userids.c (classify_user_id): Support 32 byte fingerprints.
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR32): New.
(struct keydb_search_desc): Add field fprlen.
* kbx/keybox-defs.h (struct _keybox_openpgp_key_info): Add field
version and increase size of fpr to 32.
* kbx/keybox-blob.c: Define new version 2 for PGP and X509 blobs.
(struct keyboxblob_key): Add field fprlen and increase size of fpr.
(pgp_create_key_part_single): Allow larger fingerprints.
(create_blob_header): Implement blob version 2 and add arg want_fpr32.
(_keybox_create_openpgp_blob): Detect the need for blob version 2.
* kbx/keybox-search.c (blob_get_first_keyid): Support 32 byte
fingerprints.
(blob_cmp_fpr): Ditto.
(blob_cmp_fpr_part): Ditto.
(has_fingerprint): Add arg fprlen and pass on.
(keybox_search): Support KEYDB_SEARCH_MODE_FPR32 and adjust for
changed has_fingerprint.
* kbx/keybox-openpgp.c (parse_key): Support version 5 keys.
* kbx/keybox-dump.c (_keybox_dump_blob): Support blob version 2.
* g10/delkey.c (do_delete_key): Support KEYDB_SEARCH_MODE_FPR32.
* g10/export.c (exact_subkey_match_p): Ditto.
* g10/gpg.c (main): Ditto.
* g10/getkey.c (get_pubkey_byfprint): Adjust for changed
KEYDB_SEARCH_MODE_FPR.
* g10/keydb.c (keydb_search_desc_dump): Support
KEYDB_SEARCH_MODE_FPR32 and adjust for changed KEYDB_SEARCH_MODE_FPR.
(keydb_search): Add new arg fprlen and change all callers.
* g10/keyedit.c (find_by_primary_fpr): Ditto.
* g10/keyid.c (keystr_from_desc): Ditto.
* g10/keyring.c (keyring_search): Ditto.
* g10/keyserver.c (print_keyrec): Ditto.
(parse_keyrec): Ditto.
(keyserver_export): Ditto.
(keyserver_retrieval_screener): Ditto.
(keyserver_import): Ditto.
(keyserver_import_fprint): Ditto.
(keyidlist): Ditto.
(keyserver_get_chunk): Ditto.
* g10/keydb.c (keydb_search): Add new arg fprlen and change all
callers.
* sm/keydb.c (keydb_search_fpr): Adjust for changed
KEYDB_SEARCH_MODE_FPR.
--
This prepares the support for OpenPGP v5 keys. The new version 2 blob
format is needed for the longer fingerprints and we also use this
opportunity to prepare for storing the keygrip in the blob for faster
lookup by keygrip. Right now this is not yet functional.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (AC_CHECK_SIZEOF): Test size_t.
* g10/sig-check.c (check_signature_end_simple): Support v5 signatures
as per current rfc4880bis. For correctness also allow for N > 2^32.
* g10/sign.c (pt_extra_hash_data_t): New.
(hash_sigversion_to_magic): New arg EXTRAHASH.
(write_plaintext_packet): New arg R_EXTRAHASH.
(write_signature_packets): Pass EXTRAHASH.
(sign_file): Ditto.
(sign_symencrypt_file): Ditto.
--
Take care: The code path for v5 sigs has not yet been tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/ecdh.c (kek_params_table): Use CIPHER_ALGO_AES192 for
ECC strength 384, according to RFC-6637.
--
Reported-by: Trevor Bentley
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keylist.c (print_key_line): Print a warning for invalid algos.
--
Non-OpenPGP compliant keys now show a warning flag on the sec or pub
line like in:
gpg: can't encode a 256 bit MD into a 88 bits frame, algo=8
sec cv25519 2019-01-30 [INVALID_ALGO]
4239F3D606A19258E7A88C3F9A3F4F909C5034C5
uid [ultimate] ffffff
Instead of showing the usage flags "[CE]". Without this patch only
the error message is printed and the reason for it was not immediately
obvious (cv25519 is encryption only but we always consider the primary
key as having the "C" flag).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (map_pk_gcry_to_openpgp): Add EdDSA mapping.
--
Due to this missing mapping a "gpg --export --full-gen-key" with
selection "13 - Existing key" did not worked for an ed25519 key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (agent_get_s2k_count): Actually return the count.
--
The previous push was definitely a bit to hasty.
Fixes-Commit: ec13b1c562
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/passphrase.c (encode_s2k_iterations): Move function to ...
* common/openpgp-s2k.c: new file. Remove default intialization code.
* common/openpgpdefs.h (S2K_DECODE_COUNT): New to keep only one copy.
* g10/call-agent.c (agent_get_s2k_count): Change to return the count
and print an error.
* agent/protect.c: Include openpgpdefs.h
* g10/card-util.c (gen_kdf_data): Adjust for changes
* g10/gpgcompose.c: Include call-agent.h.
(sk_esk): Adjust for changes.
* g10/passphrase (passphrase_to_dek): Adjust for changes.
* g10/main.h (S2K_DECODE_COUNT): Remove macro.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (openpgp_pk_test_algo2): Add extra check.
--
The problem is that --key-gen --batch with a parameter file didn't
detect that Elgamal is not capable of signing and so an error was only
triggered at the time the self-signature was created. See the code
comment for details.
GnuPG-bug-id: 4329
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (print_pubkey_info): Reverse the condition.
--
This mistakes were introduced when replacing by estream.
It resulted 'gpg --card-status' from a process with no controlling
terminal fails.
Fixes-commit: fb2ba98963
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/packet.h (struct revocation_key): Add field 'fprlen'.
* g10/parse-packet.c (parse_revkeys): Set fprlen and allow for v5
keys. Also fix reading of unitialized data at place where
MAX_FINGERPRINT_LEN is used.
* g10/revoke.c (gen_desig_revoke): Allow for v5 keys and use fprlen.
Do an explicit compare to avoid reading unitialized data.
* g10/sig-check.c (check_revocation_keys): Use the fprlen.
* g10/getkey.c (merge_selfsigs_main): Do an explicit copy to avoid
reading unitialized data.
* g10/import.c (revocation_present): Use fprlen.
* g10/keyedit.c (show_key_with_all_names): Use fprlen.
(menu_addrevoker): Use fprlen. Allow for v5 keys.
* g10/keygen.c (keygen_add_revkey): Use fprlen.
(parse_revocation_key): Allow for v5 keys.
* g10/keyid.c (keyid_from_fingerprint): Allow for v5 keys. Print a
better error message in case of bogus fingerprints.
* g10/keylist.c (print_revokers): Use fprlen.
--
The reading of uninitialized data is harmless but we better fix it to
make valgrind happy. More serious was that we always passed
MAX_FINGERPRINT_LEN but we will need to support 20 and 32 octet
fingerprints and MAX_FINGERPRINT_LEN would be too large for a v4.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (parse_list_options): Add option "show-only-fpr-mbox".
* g10/options.h (LIST_SHOW_ONLY_FPR_MBOX): New.
* g10/keylist.c (list_keyblock_simple): New.
(list_keyblock): Call it.
(list_all): Do not print the keyring name in LIST_SHOW_ONLY_FPR_MBOX
mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/mbox-util.c (mailbox_from_userid): Add arg subaddress and
implement. Change all callers to pass false for it.
* common/t-mbox-util.c (run_mbox_no_sub_test): New.
(run_filter): Add arg no_sub.
(main): Call new test and add option --no-sub.
--
Some stats: In the about 5300000 keys on the SKS servers we found 3055
unique mailboxes with a '+' in it. After removing leading and
trailing '+' as well as multiple '+' (e.g. "c++" or "foo+bar+baz")
2697 were left which seem to be valid sub-addresses.
To filter mailboxes out from a line delimited list with
user-ids (e.g. an SQL output), the command
t-mbox-util --verbose --filter
can be used; to output w/o sub-addresses add --no-sub.
GnuPG-bug-id: 4200
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (mainproc_context): New member
'seen_pkt_encrypted_aead'.
(release_list): Clear 'seen_pkt_encrypted_aead'.
(proc_encrypted): Set 'seen_pkt_encrypted_aead'.
(have_seen_pkt_encrypted_aead): New.
(proc_plaintext): Do not enable extra hash contexts when decryption
AEAD input.
--
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/armor.c (asctobin): Larger look-up table for fast path.
(initialize): Update 'asctobin' initialization.
(radix64_read): Add fast path for radix64 to binary conversion.
--
This patch adds fast path for radix64 to binary conversion in
armored decryption.
Benchmark results below, tested on Intel Core i7-4790K (turbo off).
Encrypted 2 GiB through pipe to ramfs file using AES128. Decrypt
ramfs file out through pipe to /dev/null.
before patch-set
----------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 13.8 140 MB/s
decrypt-aead: 30.6 68 MB/s
encrypt-cfb: 17.4 114 MB/s
decrypt-cfb: 32.6 64 MB/s
after (decrypt+iobuf+crc+radix64 opt)
-------------------------------------
gpg process
armor: user time pipe transfer rate
decrypt-aead: 9.8 200 MB/s
decrypt-cfb: 11.9 168 MB/s
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/armor.c (bintoasc): Change to read-only.
(initialize): Use const pointer for 'bintoasc'.
(armor_output_buf_as_radix64): New function for faster binary to
radix64 conversion.
(armor_filter): Use new conversion function.
--
This patch adds faster binary to radix64 conversion to speed up
armored encryption.
Benchmark results below, tested on Intel Core i7-4790K (turbo off).
Encrypted 2 GiB through pipe to ramfs file using AES128. Decrypt
ramfs file out through pipe to /dev/null.
before patch-set
----------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 13.8 140 MB/s
decrypt-aead: 30.6 68 MB/s
encrypt-cfb: 17.4 114 MB/s
decrypt-cfb: 32.6 64 MB/s
after (decrypt+iobuf+crc+radix64 opt)
-------------------------------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 2.7 523 MB/s
encrypt-cfb: 6.7 264 MB/s
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/armor.c (CRCINIT, CRCPOLY, CRCUPDATE, crc_table): Remove.
(new_armor_context): Open libgcrypt CRC24 context.
(release_armor_context): Close CRC24 context.
(initialize): Remove CRC table generation.
(get_afx_crc): New.
(check_input, fake_packet, radix64_read, armor_filter): Update to use
CRC24 context.
* g10/filter.h (armor_filter_context_t): Replace crc intermediate value
with libgcrypt md context pointer.
--
This patch changes armor filter to use optimized CRC24 implementation
from libgcrypt to speed up encryption and decryption.
Benchmark results below, tested on Intel Core i7-4790K (turbo off).
Encrypted 2 GiB through pipe to ramfs file using AES128. Decrypt
ramfs file out through pipe to /dev/null.
before patch-set
----------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 13.8 140 MB/s
decrypt-aead: 30.6 68 MB/s
encrypt-cfb: 17.4 114 MB/s
decrypt-cfb: 32.6 64 MB/s
after (decrypt+iobuf+crc opt)
-----------------------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 8.7 211 MB/s
decrypt-aead: 17.6 116 MB/s
encrypt-cfb: 12.6 153 MB/s
decrypt-cfb: 19.6 105 MB/s
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/armor.c (radix64_read): Check EOF with '!afx->buffer_len' instead
of 'c == -1', as 'c' is never set to this value.
--
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/decrypt-data.c (fill_buffer): Use iobuf_read instead of iobuf_get
for reading data.
--
This patch reduces iobuf_read per byte processing overhead and speeds
up decryption.
Benchmark results below, tested on Intel Core i7-4790K (turbo off).
Encrypted 2 GiB through pipe to ramfs file using AES128. Decrypt
ramfs file out through pipe to /dev/null.
before patch-set
----------------
gpg process
no-armor: user time pipe transfer rate
encrypt-aead: 1.02 1.0 GB/s
decrypt-aead: 10.8 185 MB/s
encrypt-cfb: 4.8 342 MB/s
decrypt-cfb: 12.7 157 MB/s
gpg process
armor: user time pipe transfer rate
encrypt-aead: 13.8 140 MB/s
decrypt-aead: 30.6 68 MB/s
encrypt-cfb: 17.4 114 MB/s
decrypt-cfb: 32.6 64 MB/s
after (decrypt opt)
-------------------
gpg process
no-armor: user time pipe transfer rate
decrypt-aead: 7.3 263 MB/s
decrypt-cfb: 9.3 211 MB/s
gpg process
armor: user time pipe transfer rate
decrypt-aead: 27.0 77 MB/s
decrypt-cfb: 29.0 72 MB/s
Note: decryption results are much slower than encryption because of
extra SHA1 & RIPEMD160 hashing.
GnuPG-bug-id: 3786
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/cipher-aead.c (do_flush): No cast is correct.
* g10/decrypt-data.c (aead_underflow): No cast needed.
Use "%j" for uint64_t for chunklen.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/call-agent.c (learn_status_cb): Parse "bt" flag.
* g10/call-agent.h: New member field "bt".
* g10/card-util.c (uif): Limit its access only when it is supported.
* scd/app-openpgp.c (do_setattr): Allow access to UIF objects only
when there is a button.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/tdbio.c (tdbio_update_version_record): Never store a TOFU model.
(create_version_record): Don't init as TOFU.
(tdbio_db_matches_options): Don't indicate a change in case TOFU is
stored in an old trustdb file.
--
This change allows to switch between a tofu and pgp or tofu+pgp trust
model without an auto rebuild of the trustdb. This also requires that
the tofu trust model is requested on the command line. If TOFU will
ever be the default we need to tweak the model detection via TM_AUTO
by also looking into the TOFU data base,
GnuPG-bug-id: 4134
* g10/sig-check.c (check_signature_end_simple):
--
Obviously we should not ignore a back signature here.
Fixes-commit: 214b007726
GnuPG-bug-id: 4014
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pubkey-enc.c (get_session_key): Take care of
opt.skip_hidden_recipients.
--
This was lost due to
Fixes-commit: ce2f717601
GnuPG-bug-id: 4169
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_DROP_UIDS): New.
(EXPORT_DROP_UIDS): New.
* g10/import.c (parse_import_options): Add option "import-drop-uids".
(import_one): Don't bail out with that options and no uids found.
Also remove all uids.
(remove_all_uids): New.
* g10/export.c (parse_export_options): Add option "export-drop-uids".
(do_export_one_keyblock): Implement option.
--
These options are required for experiments with changes to the
keyserver infrastructure.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/skclist.c (enum_secret_keys): Use SK_LIST instead of pubkey_t.
--
The use of pubkey_t was wrong. The use is just a list of keys, not
with keyblock. With SK_LIST, release_sk_list releases memory by
free_public_key.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/skclist.c (enum_secret_keys): Don't forget to call
free_public_key in the error return paths.
--
Reported-by: Philippe Antoine
GnuPG-bug-id: 4140
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* dirmngr/ks-engine-hkp.c (ks_hkp_search): Send SOURCE status also on
NO DATA error.
(ks_hkp_get): Ditto.
* g10/call-dirmngr.c (gpg_dirmngr_ks_search): Print "data source" info
also on error.
(gpg_dirmngr_ks_get): Ditto.
--
If a keyserver does not return any data it can be useful to know which
keyserver out of the pool answered.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (read_block): Call free_packet to skip the packet.
--
Reported-by: Philippe Antoine
GnuPG-bug-id: 3916
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c (oKnownNotation): New const.
(opts): Add option --known-notation.
(main): Set option.
* g10/parse-packet.c (known_notations_list): New local var.
(register_known_notation): New.
(can_handle_critical_notation): Rewrite to handle the new feature.
Also print the name of unknown notations in verbose mode.
--
GnuPG-bug-id: 4060
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (getkey_ctx_s): New field found_via_akl.
(get_pubkey_byname): Set it.
(only_expired_enc_subkeys): New.
(get_best_pubkey_byname): Add support to refresh expired keys from the
WKD.
--
A little drawback of that code is that if the WKD has no update for an
expired key each access of the key will trigger a WKD lookup (unless
cached by the dirmngr). To avoid this we need to record the last time
we have checked for an update but that would in turn require that we
update the keyring for each check. We defer this until we have a
better key database which allows for fast updates of meta data.
Testing the code is currently a bit cumbersome because it requires to
update a key in the WKD several times. Eventually we we need a
network emulation layer to provide sample data for the regression
tests.
GnuPG-bug-id: 2917
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.h (agent_card_info_s): Rename the "*valid" fields to
"*len".
* g10/call-agent.c (unhexify_fpr): Change to take a FPRLEN and to
return the actual length.
(agent_release_card_info): Adjust for these changes.
* g10/card-util.c (print_sha1_fpr): Rename to print_shax_fpr and add
arg FPRLEN. Change all callers to pass the length.
(print_sha1_fpr_colon): Rename to print_shax_fpr_colon and add arg
FPRLEN. Change all callers to pass the length.
(fpr_is_zero): Add arg FPRLEN.
(fpr_is_ff): Ditto.
(show_card_key_info): Use the new functions.
* g10/skclist.c (enum_secret_keys): Use MAX_FINGERPRINT_LEN.
--
This is not needed right now but we should get rid of all hard coded
fingerprint lengths. Thus this change.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/skclist.c (enum_secret_keys): Since "KEY-FPR" returns
fingerprint in binary, change it to hex string.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (enum_secret_keys): Move to...
* g10/skclist.c (enum_secret_keys): ... here.
--
The function enum_secret_keys is not used by gpgv.c, but it is in
getkey.c. Extending enum_secret_keys will require change of gpgv.c,
so moving the function to the file for gpg is better.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (enum_secret_keys): Fix comment for usage of
enum_secret_keys, following the previous change.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (enum_secret_keys): Collecting keys in the context,
check duplicate to make sure returning only unique keys.
* g10/pubkey-enc.c (get_session_key): Now, it's the responsibility of
enum_secret_keys to free keys.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (struct mainproc_context): It's now pubkey_enc_list.
(do_proc_packets): Remove the first arg CTRL. Fix call of
proc_pubkey_enc.
(release_list): Handle pubkey_enc_list.
(proc_pubkey_enc): Remove the first arg CTRL. Simply put the packet
to pubkey_enc_list.
(print_pkenc_list): Remove the last arg FAILED.
(proc_encrypted): Only call print_pkenc_list once.
Handle DEK here.
(proc_packets, proc_signature_packets, proc_signature_packets_by_fd)
(proc_encryption_packets): Fix call of do_proc_packets.
* g10/packet.h (struct pubkey_enc_list): Define.
* g10/pubkey-enc.c (get_it): Change the second argument K.
(get_session_key): Select session key by LIST, using enum_secret_keys.
* g10/gpgv.c (get_session_key): Change the second argument K.
* g10/test-stubs.c (get_session_key): Likewise.
--
Collect all PKT_PUBKEY_ENC packets, and then, process the
PKT_ENCRYPTED* packet.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/parse-packet.c (parse_symkeyenc): Use iobuf_get_noeof.
(parse_key): Likewise.
--
When EOF comes at parsing s2k.count, it is possible the value will
be (unsigned long)-1. Then, the result of S2K_DECODE_COUNT will be
undefined. This patch fixes undefined behavior.
Reported-by: Philippe Antoine
GnuPG-bug-id: 4093
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/call-dirmngr.c (MAX_WKD_RESULT_LENGTH): New.
(gpg_dirmngr_wkd_get): Use it.
--
WKD should return only a single key with just one UID. For key
rollover 2 keys may be send. A total of 256 KiB seems to be a
generous limit here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr-status.h: New.
* dirmngr/dirmngr.h: Include dirmngr-status.h and move some prototypes
to that file.
* dirmngr/t-support.c: New.
* dirmngr/Makefile.am (dirmngr_SOURCES): Add dirmngr-status.h.
(t_common_src): Add t-support.c.
* dirmngr/server.c (dirmngr_status_printf): Bypass if CTRL is NULL.
* dirmngr/dns-stuff.c: Include dirmngr-status.h.
(libdns_init): Print WARNING status line. Change call callers to take
and pass a CTRL argument.
* g10/call-dirmngr.c (ks_status_cb): Print info for new WARNING
status.
--
To test this you can change RESOLV_CONF_NAME in dns-stuff.c and run
gpg --recv-key -v SOMETHING.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/key-clean.c (clean_key): Rename to clean_all_uids and split
subkey cleaning into ...
(clean_all_subkeys): new. Call that always after the former clean_key
invocations.
--
Note that the clean_all_subkeys function will later be extended.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkey_for_sig): New.
(get_pubkeyblock_for_sig): New.
* g10/mainproc.c (issuer_fpr_raw): Give global scope.
(check_sig_and_print): Use get_pubkeyblock_for_sig.
* g10/pkclist.c (check_signatures_trust): Use get_pubkey_for_sig.
* g10/sig-check.c (check_signature2): Ditto.
(check_signature_over_key_or_uid): Ditto.
--
GnuPG-bug-id: 4046
The whole getkey stuff is still a mess with way to much duplication
and missing caching of already fetched data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (read_block): Add special treatment for bad user ids
and comment packets.
--
See
GnuPG-bug-id: 4022
for an example of a bogus user id.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sig-check.c (check_signature_end_simple): Check sign usage.
--
Without this patch the signature verification fails only due to the
missing back signature. This check better explains what went wrong.
GnuPG-bug-id: 4014
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (get_revocation_reason): New.
(list_standalone_revocation): Extend function.
--
Note that this function extends the "rvs" field signature-class (field
11) with the revocation reason. GPGME does not yet parse this but it
can be expected that the comma delimiter does not break other parsers.
A new field is added to the "rvs" (and in future also the "rev")
record to carry a record specific comment. Hopefully all parsers
meanwhile learned the lesson from other new fields and don't bail out
on more fields than they know about.
This is partial solution to
GnuPG-bug-id: 1173
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (impex_filter_getval): Add new "usage" property for
drop-subkey filter.
--
For example, this permits extraction of only encryption-capable
subkeys like so:
gpg --export-filter 'drop-subkey=usage !~ e' --export $FPR
GnuPG-Bug-id: 4019
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/gpg.c (main): Set some list options.
--
The new command --show-keys is commonly used to check the content of a
file with keys. In this case it can be expected that all included
subkeys and uids are of interested, even when they are already expired
or have been revoked.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_plaintext): Sanitize verbose output.
--
This fixes a forgotten sanitation of user supplied data in a verbose
mode diagnostic. The mention CVE is about using this to inject
status-fd lines into the stderr output. Other harm good as well be
done. Note that GPGME based applications are not affected because
GPGME does not fold status output into stderr.
CVE-id: CVE-2018-12020
GnuPG-bug-id: 4012
* g10/key-check.c (key_check_all_keysigs): Factor some code out to ...
(remove_duplicate_sigs): new.
(key_check_all_keysigs): Call remove_duplicate_sigs again after
reordering.
--
This is a follupup for commit 26bce2f01d
to cleanup the code and to add a second de-duplicate step when needed.
GnuPG-bug-id: 3994
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKG_siganture): Add field 'help_counter'.
* g10/key-check.c (sig_comparison): Take care of HELP_COUNTER.
(key_check_all_keysigs): De-duplicate on a per-block base.
--
The key_check_all_keysigs first does a detection of duplicate
signature. This is done over all signatures at once. The problem
here is for example:
key
uid_1
sig_uid_1.1
sig_uid_1.2
subkey_1
sig_sub_1.1
subkey_2
sig_sub_2.1
sig_sub_2.2 (duplicate of sig_sub_1.1)
Now the de-duplication deletes the first signature and keeps the
second. That works in most cases for foreign signature on userids but
in the above constellation the code simply removes sig_sub_1.1 so that
subkey_1 has no binding signature anymore. In a later step during
import the missing binding is detected and subkey_1 is removed because
it is not anymore valid. The sig_sub_2.2 will also be removed later
because it does not check out for subkey_2 (that is as expected).
The fix is to let the de-duplication work only on blocks (ie. within
the signatures of a user id or a subkey). This will not detect all
duplicates but that does not harm because later steps will detect and
remove them.
In the above case (with this patch applied) the second phase of
key_check_all_keysigs will reorder key signatures and move the
duplicate sig_sub_2.2 directly after sig_sub_1.1. This duplicates the
signature and for cleanness we should kick the de-duplication process
again. This will be done with a followup patch.
GnuPG-bug-id: 3994
Signed-off-by: Werner Koch <wk@gnupg.org>
