* scd/apdu.c (apdu_open_reader): Skip use of a reader if it's not the
one specified when it is specified.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (apptype_from_keyref): New.
(maybe_switch_app): Add arg 'keyref' and use this also for switching.
Change all callers to pass a keyref if needed.
--
A drawback of this auto-switching is that the PIN cache of the cards
are cleared. That could be mitigated by having our own cache but we
always tried to avoid that.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (do_reselect): Clear PIN cache flags.
--
It seems that the verification status of the OpenPGP app on a Yubikey
is reset on a select. We need to reflect this in our cache to avoid a
"Bad PIN" error on computing a signature.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_serialno): Add option --all.
(open_card_with_request): Implement that option.
* scd/app.c (select_all_additional_applications_internal): New.
(select_additional_application): Add mode to call new function.
--
This option is currently only useful for Yubikeys and basically
ignored with other cards. Its use is
SERIALNO --all
LEARN --force --multi
which will then print keypairinfo and other stuff for the OpenPGP and
PIV application of a Yubikey. Scute is going to use this to allow
using certificates from OpenPGP and PIV at the same time.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (select_additional_application): Return error for unknown
NAME.
--
ERR was only set but not used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (APP_LEARN_FLAG_MULTI): New.
* scd/command.c (cmd_learn): Add option --multi.
* scd/app.c (app_write_learn_status): Factor some code out to ...
(write_learn_status_core): new.
(app_write_learn_status): Implement flag --multi.
--
This new option is intended to return information about all active
applications of the current card. Thus if a "SERIALNO openpgp" and a
"SERIALNO piv" has been done in a session the command "LEARN --force
--multi" returns information about both applications.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (APP_LEARN_FLAG_KEYPAIRINFO): New flag macro..
* scd/command.c (cmd_learn): Pass that flag instead of a plain number.
* scd/app-nks.c (do_learn_status_core): Use new flag.
* scd/app-p15.c (do_learn_status): Ditto.
* scd/app-piv.c (do_learn_status): Ditto.
* scd/app-sc-hsm.c (do_learn_status): Ditto.
* scd/app.c (app_write_learn_status): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c (do_getattr): Add new attributes.
--
Note that these were already added to 2.2 as part of
commit 23784f8bf0ac6d6c52cb2de2f99f46017a92c11a
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (select_additional_application): Initialize card of APP.
Break after the selection.
Don't free APP if success.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (bulk_in): Increase timeout by the multiplier
value as defined section 6.2.6 in CCID specification.
--
For TPDU level transfer, it was handled. This is fix for APDU level
transfer.
GnuPG-bug-id: 4646
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (ccid_transceive_apdu_level): Use bBWI=0 for APDU
level transfer.
(ccid_transceive): Use bBWI=0 or the value returend by WTX for TPDU
level transfer.
GnuPG-bug-id: 4654
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (check_application_conflict): Add args to pass a serialno.
* scd/command.c (open_card_with_request): Pass the serialno to
check_application_conflict.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (compare_card_list_items): New.
(app_send_card_list): Sort the card objects by slot.
--
This is required so that in gpg-card a "list N" command always returns
the expected card. Sorting by slot should be sufficient.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (struct app_ctx_s): Add func ptr 'reselect'.
* scd/app-piv.c (do_reselect): New.
(app_select_piv): Move AID constant to file scope.
* scd/app-openpgp.c (do_reselect): New.
(app_select_openpgp): Move AID constant to file scope.
* scd/app.c (apptype_from_name): New.
(check_application_conflict): Check against all apps of the card.
Always set current_apptype.
(select_additional_application): New.
(maybe_switch_app): New.
(app_write_learn_status, app_readcert, app_readkey, app_getattr)
(app_setattr, app_sign, app_auth, app_decipher, app_writecert)
(app_writekey, app_genkey, app_change_pin, app_check_pin): Use it here.
(app_do_with_keygrip): Force reselect on success.
(app_new_register): Move setting of CURRENT_APPTYPE to ...
(select_application): here so that it will be set to the requested
card.
* scd/command.c (open_card_with_request): Select additional
application if possible.
--
Noet that we will likely need to rework this even more so to get well
defined semantics for card access.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_do_with_keygrip): Lock the card.
--
Better safe than sorry.
We should also review the card reference counting to see whether we
better ref the returned card object already here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c: Chnage all function dispatcher.
--
This change will allow us to easier integrate an app swithcing logic.
The change should have no user visible effect. The error checking we
do now with the card locked will rarely be asserted. It is the
correct thing to do anyway.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (check_conflict): Fold into ...
(check_application_conflict): this and adjust callers. Return a
different error code if it is possible to switch apps.
--
Right now this change does nothing visible.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/scdaemon.h: Include app-common.h. Remove inclusion of that
header from all other files.
(card_t, app_t): Move typedef to ...
* scd/app-common.h: here. Use them in the defs.
--
In another patch we will need apptype_t in the ctrl object and thus we
need to reorganize things a bit now. Given that most files need
app-common anyway it makes sense to always include it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (cardtype_t): New.
(apptype_t): New.
(struct card_ctx_s): Change type of cardtype.
(struct app_ctx_s): Change type of apptype. Adjust all users.
* scd/app.c (struct app_priority_list_s): Add field apptype.
(strcardtype): New. Use as needed.
(strapptype): New. Use as needed.
--
Using strcmp is lame and we can't use a switch to let the compiler
complain about missed cases.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (struct card_ctx_s): New.
(struct app_ctx_s): Factor card specific fields out to card_ctx_s.
(app_get_slot): New.
* scd/scdaemon.h (card_t): New.
(struct server_control_s): Rename field app_ctx to card_ctx and change
all users.
* scd/app-dinsig.c: Use app_get_slot and adjust for chang in card
related fields.
* scd/app-geldkarte.c: Ditto.
* scd/app-nks.c: Ditto.
* scd/app-openpgp.c: Ditto.
* scd/app-p15.c: Ditto.
* scd/app-sc-hsm.c: Ditto.
* scd/app.c: Lost of changes to adjust for the changed data
structures. Change all callers.
(app_list_lock): Rename to card_list_lock.
(app_top): Remove.
(card_top): New.
(lock_app): Rename to lock_card and change arg type.
(unlock_app): Rename to unlock_card.
(app_dump_state): Print card and app info.
(app_reset): Rename to card_reset.
(app_new_register): Change for the new data structure.
(deallocate_card): Dealloc card and all apps.
(app_ref): Rename to card_ref.
(app_unref): Rename to card_unref.
(app_unref_locked): Rename to card_unref_locked.
(card_get_serialno): New.
* scd/command.c (cmd_pkdecrypt): Actually use the looked up card and
former app object and not the standard one from the context.
--
Although quite large, this is a straightforward change to separate
card/token related data from card application related data. Before
this change there was a one-to-one relation between card and
application and no way to represent several applications on a card.
The new data structure will allow for such a representation.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_ref): New.
(app_unref): New.
(release_application): Renamed to ...
(app_unref_locked): this and remove arg locked_already. Change
callers to use this or app_ref.
* scd/command.c (open_card_with_request):
(cmd_pksign, cmd_pkauth, cmd_pkdecrypt): Use app_ref and app_unref
instead of accessing the counter directly.
--
This is better in case we need to debug stuff. There is a real change
however: We now lock and unlock the app before changing the reference
count.
The whole app locking business should be reviewed because we pass
pointers along without immediately bumping the refcount.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (do_with_keygrip): Return a real error code to
avoid misinterpretation of the result. Also fix the case for a too
small buffer.
--
The only real chnage is the case for a too small buffer. That should
in general never happen but if so we now return an error instead of
success.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (get_public_key): Use gnupg_module_name instead of
just "gpg".
--
There is no bug report regarding this and it would be very unlikely
but we should always use the gpg belonging to our code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/scdaemon.texi (card-timeout): Remove.
* scd/scdaemon.c (main): Remove oCardTimeout handling.
--
There was the card-timeout option in GnuPG 2.0, but it was never
implemented correctly. The intention of this option was to allow
sharing smartcard among multiple applications, but this didn't work
well as user's expectation (it only worked with DISCONNECT command).
This is because other parts of scdaemon assumes exclusive access. In
GnuPG 2.1, the support of the option was removed, improving
"DISCONNECT" command always works well without this option.
GnuPG-bug-id: 3383
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (struct pcsc_io_request_s): Use pcsc_dword_t for Windows.
--
This fix is for correctness and for the future when we will support
64-bit Windows.
GnuPG-bug-id: 4454
Suggested-by: Juris Ozols
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/command.c (cmd_pksign, cmd_pkauth, cmd_pkdecrypt): When length
of keyidstr is 40, it is considered as a keygrip for direct use.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-common.h (struct app_ctx_s): Add with_keygrip function.
* scd/app-openpgp.c (do_with_keygrip): New.
* scd/app.c (app_do_with_keygrip): New.
* scd/command.c (cmd_keyinfo): New.
(send_keyinfo): New.
--
KEYGRIP_ACTION_LOOKUP is not yet used. It will be used for directly
asking PK* action to determine an APP.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (struct app_local_s): Add keygrip_str.
(store_keygrip): New.
(read_public_key): Call store_keygrip to hold keygrip.
(get_public_key): Likewise.
(send_keypair_info): Use stored keygrip_str.
(check_keyidstr): Allow use of KEYGRIP.
(do_check_pin): Allow use of KEYGRIP of signing slot.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (CCID_CMD_TIMEOUT_LONGER): Remove.
(ccid_transceive): Don't use x4 blindly for bBWI, but use dynamically
determined value. Use value from variable wait_more for bulk_in.
Set wait_more by the value of time extension request.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/command.c (cmd_readkey): New options --info and --info-only.
* scd/app.c (app_readkey): New arg 'flags'.
* scd/app-common.h (APP_READKEY_FLAG_INFO): New.
(struct app_ctx_s): New args 'ctrl' and 'flags' for member readkey.
Change all implementers.
* scd/app-nks.c (do_readkey): Stub implementation of
APP_READKEY_FLAG_INFO.
* scd/app-openpgp.c (do_readkey): Implement APP_READKEY_FLAG_INFO.
* scd/app-piv.c (do_readkey): Ditto.
--
This feature allows to quickly get the keygrip and in most cases also
the usage flags for one specific keyref. Example:
<- readkey --info-only PIV.9D
-> S KEYPAIRINFO FC6061FB457224370B85C6F34DD56CD29E669620 PIV.9D e
-> OK
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (agent_scd_keypairinfo): Use --keypairinfo.
* sm/call-agent.c (gpgsm_agent_scd_keypairinfo): Ditto.
* scd/app-openpgp.c (do_getattr): Add attributes "$ENCRKEYID" and
"$SIGNKEYID".
* scd/app-piv.c (do_getattr): Ditto.
--
We already have $AUTHKEYID to locate the keyref of the key to be used
with ssh. It will also be useful to have default keyref for
encryption and signing. For example, this will allow us to repalce
the use of "OPENPGP.2" by a app type specific keyref.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_new_register): Detect yk4 version numbers.
--
Having the version of the yubikey is important to select which other
methods can be used with a Yubikey. Note that we do not detect the
formfactor of a Yubikey 4 and instead use 0 for our serial number
prefix. This does not affect app-openpgp becuase there we use the app
specific serial number.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/ecdh.c (kek_params_table): Use CIPHER_ALGO_AES192 for
ECC strength 384, according to RFC-6637.
--
Reported-by: Trevor Bentley
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (app_new_register): Set card version for Yubikeys.
(app_write_learn_status): Print CARDVERSION and APPVERSION.
* tools/card-call-scd.c (learn_status_cb): Detect them.
* tools/gpg-card.h (struct card_info_s): Add appversion and
cardversion.
* tools/gpg-card.c (list_openpgp): Remove version printing from serial
number.
(print_a_version): New.
(list_card): Print card and app version.
(cmd_generate): Do not allow broken Yubikeys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-piv.c (concat_tlv_list): Add arg 'secure' and adjust
callers.
(writekey_rsa, writekey_ecc): New.
(do_writekey): New.
(do_writecert): Provide a better error message for an empty cert.
(app_select_piv): Register do_writekey.
* scd/iso7816.c (iso7816_send_apdu): New.
* scd/app-common.h (APP_WRITEKEY_FLAG_FORCE): New.
* agent/command.c (cmd_keytocard): Make the timestamp optional.
* tools/card-call-scd.c (inq_writekey_parms): Remove.
(scd_writekey): Rewrite.
* tools/gpg-card.c (cmd_writekey): New.
(enum cmdids): Add cmdWRITEKEY.
(dispatch_command, interactive_loop): Call cmd_writekey.
--
This has been tested with gpgsm and RSA keys. For ECC keys only
partly tested using the sample OpenPGP nistp256 and nistp384 keys
because gpgsm does not yet support ECC certificates and thus we can't
write the certificates to the cert object after a writekey. Note that
they nevertheless show up in "gpgcard list" because gpg-card searches
for them in gpg and gpgsm. However, this does not work completely.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-piv.c (do_readcert): Add hack to read Yubikey attestaions.
--
Use
gpg-card 'readcert PIV.ATST.9A >x.crt'
to store the attestation certificate for 9A into X.CRT.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-piv.c (do_readkey): Read the key from the cert here instead
of letting the upper layer do this.
(do_writecert): Check that the cert matches the key and that a key has
already been generated.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-help.c (app_help_pubkey_from_cert): New.
* scd/command.c (cmd_readkey): Refactor to use that new function and
handle the --advanced flag only here.
* scd/app.c (app_readkey): Remove parm advanced.
* scd/app-common.h (struct app_ctx_s): Remove parm advanced from the
readkey member.
* scd/app-nks.c (do_readkey): Adjust for removed parm.
* scd/app-piv.c (do_readkey): Ditto.
* scd/app-openpgp.c (do_readkey): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.c (ccid_open_usb_reader): Alway submit SET_INTERFACE
control transfer.
--
This handling is not mondatory, but it's better to do so, because
there are card reader with pinpad and token with ack button, which
support user interaction.
User interaction status should be reset at open time. The status
should be reset when the session is closed/stopped. In practice,
since cleanup routine in a driver may not be called properly, it's
good to submit SET_INTERFACE at open time.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-piv.c (do_decipher): New.
--
Note that ECDH decryption has not been tested due to the lack of ECC
support in gpgsm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-piv.c (concat_tlv_list): New.
(get_key_algorithm_by_dobj): Rename args for clarity.
(do_auth): factor all code out to ...
(do_sign): new. Implement RSA signing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-piv.c (struct genkey_result_s): Remove type and all users.
(send_keypair_and_cert_info): Print certinfo only if we got a cert..
(readcert_by_tag): Add arg r_mechanism and implement reading of public
keys.
(get_keygrip_by_tag): Use a public key to compute the keygrip.
(do_readcert): Make sure to only return a certificate.
(do_readkey): Read public key from the DO if a certificate is missing.
(get_key_algorithm_by_dobj): Get the algorithm also from a public key.
(does_key_exist): String changes.
(do_genkey): Remove result caching and store public key in the DO.
--
This removes the result cache and instead stores the public key in the
certificate object. This allows to properly list public keys at any
time after generating a key and before a new certificate is stored
there.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-piv.c (struct genkey_result_s): new.
(struct app_local_s): add member genkey_results.
(do_deinit): Free that one.
(flush_cached_data): Extend to delete all items.
(keyref_from_dobj): New.
(do_readkey): New.
(do_auth): Use keyref_from_dobj.
(does_key_exist): New.
(genkey_parse_rsa): New.
(do_genkey): New.
--
We need to extend the GENKEY in command.c to support other algos.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_genkey): Add arg keytype.
* scd/app-common.h (struct app_ctx_s): Fitto for the genkey member.
* scd/command.c (cmd_genkey): Adjust for change.
* scd/iso7816.c (do_generate_keypair): Replace arg read_only by new
args p1 and p2.
(iso7816_read_public_key): Adjust for this.
(iso7816_generate_keypair): Add new args p1 and p2.
* scd/app-openpgp.c (do_genkey): Adjust for changes.
--
The OpenPGP card creates keys according to parameters read from a data
object. Other cards we are about to implement require a direct
specification of the requested keytype. This patch implements the
required changes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (APP_GENKEY_FLAG_FORCE): New.
* scd/app.c (app_change_pin): Rename arg reset_mode to flags and
change from int to unsigned int.
--
This is basically a documentation fix.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (do_change_pin): Allow prefixing the CHVNO with
"OPENPGP."
* tools/card-call-scd.c (scd_change_pin): Change API to use strings.
* tools/gpg-card-tool.c (cmd_passwd): Adjust for change.
(cmd_unblock): Ditto.
--
The generic keyref allows for better error detection in case a keyref
is send to a wrong card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (do_setattr): Add new table item to flush a
different tag.
--
For whatever reasons the OpenPGP card reads the 3 CA fingerprints from
one object but sets them individually using 3 different tags. The
cache flushing was not prepared for this and so a changed CA
fingerprint showed only up after a card reset. This patch fixes it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (do_change_pin): Implement handling
APP_CHANGE_FLAG_CLEAR.
--
It is specified in the specification version 3.1 or later. Some
version 2 cards (including Gnuk) support this feature. Any version 1
card has no support for this feature.
For CHVNO = 1, it clears for both of 81 and 82; That is, user's key
usages for signing and others (decryption and auth).
For CHVNO = 3, it clears for 83, admin key.
For CHVNO = 2, it clears 82; That is, user's key usages
others (decryption and auth).
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-piv.c (parse_pin_keyref): New.
(get_chv_status): New.
(do_getattr): Add name CHV-STATUS.
(verify_pin): Add arg keyref to support other PINs.
(do_change_pin): New. Right now limited to --clear.
(do_check_pin): New.
(app_select_piv): Register new commands.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_passwd): Add option --clear.
(send_status_printf): New.
* scd/app-common.h (APP_CHANGE_FLAG_CLEAR): New.
* scd/app-nks.c (do_change_pin): Return an error if that option is
used.
* scd/app-openpgp.c (do_change_pin): Ditto.
--
Card application may support this option to clear the PIN verification
status of a specific PIN.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-piv.c: New.
* scd/Makefile.am (card_apps): Add app-piv.c
* scd/app.c (app_new_register): Try to get a Yubikey serial number.
Detect the PIV application.
(get_supported_applications): Add "piv".
--
Right now this allows the use of the authentication key (9A) for SSH
authentication. More support will follow soon.
Tested with Yubikey-5.
* scd/apdu.c (apdu_send_direct): New arg R_SW.
* scd/command.c (cmd_apdu): Ditto.
* scd/iso7816.c (iso7816_apdu_direct): New arg R_SW.
(iso7816_general_authenticate): New.
* scd/app-nks.c (get_chv_status, get_nks_version): Pass NULL for new
arg.
--
iso7816_general_authenticate will be used for the PIV card support.
The new arg to iso7816_apdu_direct and apdu_send_direct allows to get
the raw status word back without the need to handle an output buffer.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.c (intr_cb): When LIBUSB_TRANSFER_NO_DEVICE,
just handle this event as failure.
--
It used to try another interrupt transfer request to make sure
if it fails again.
GnuPG-bug-id: 4308
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/command.c (cmd_readkey): Reformat for advanced mode.
--
The --advanced option used to work only if the driver supported that
but not if we extracted the public key from an x.509 certificate.
This patch fixes that.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_new_register): Don't lock APP_LIST_LOCK here.
(select_application): Lock with APP_LIST_LOCK earlier.
--
What we want to do here is to serialize the call of
select_application. In the old code, it was possible
that a call of select_application was blocked internally,
and then another call of select_application entered.
We can have a dedicated lock for call of select_application,
but it is easier to re-use APP_LIST_LOCK.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/call-agent.c (learn_status_cb): Parse "bt" flag.
* g10/call-agent.h: New member field "bt".
* g10/card-util.c (uif): Limit its access only when it is supported.
* scd/app-openpgp.c (do_setattr): Allow access to UIF objects only
when there is a button.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (do_sign): Clear DID_CHV1 after signing.
--
We have a corner case: In "not forced" situation and authenticated,
and it is changed to "forced", card implementaiton can actually accept
signing, but GnuPG requires authentication, because it is "forced".
GnuPG-bug-id: 4177
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/card-util.c (gen_kdf_data): Support single salt.
(kdf_setup): Can have argument for single salt.
* scd/app-openpgp.c (pin2hash_if_kdf): Support single salt.
--
Gnuk has "admin-less" mode. To support "admin-less" mode with KDF
feature, salt should be same for user and admin. Thus, I introduce a
valid use of single salt.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (change_rsa_keyattr): Try usual RSA.
--
In the OpenPGP card specification, there are multiple options to
support RSA (having P and Q or not, etc.), and it is implementation
dependent. Since GnuPG doesn't have knowledge which card
implementation support which option and there is no way (yet) for card
to express itself which key attributes are supported, we haven't
supported key attribute change back to RSA. But, many card
implementation uses P and Q, try this option. If other cases,
factory-reset would be easier option.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (setup_signal_mask): New.
(main): Call setup_signal_mask.
(handle_connections): Remove signal mask setup.
--
For new thread, signal mask is inherited by thread creation.
Thus, it is best to setup signal mask just after npth_init.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (intr_cb): Try submitting INTERRUPT urb
to see if it's suspend/resume.
--
Upon suspend/resume, LIBUSB_TRANSFER_NO_DEVICE is returned, since all
URBs are cancelled. We need to see if it's real NODEV error or its by
suspend/resume. We can distinguish by sending URB again.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* configure.ac (require_pipe_to_unblock_pselect): Default is "yes".
* scd/scdaemon.c (scd_kick_the_loop): Minor clean up.
--
Normally SIGCONT or SIGUSR2 works for unblocking pselect. But on my
machine with GNU/Linux, when a machine is suspend/resume-ed, pselect
keeps blocked, while signal itself is delivered.
It's better to use pipe.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (struct reader_table_s): Add field of current_state.
(new_reader_slot): Initialize current_state.
(pcsc_get_status): Keep the status in READER_TABLE array.
Return SW_HOST_NO_READER when PCSC_STATE_CHANGED.
* scd/scdaemon.c (handle_connections): Silence a warning.
--
To detect some change of card status, including suspend/resume
possibly, SCardGetStatusChange should be used keeping the
dwCurrentState field.
This change could improve situation for suspend/resume with Yubikey on
Windows. Even not, this is doing the Right Thing.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/asshelp2.c (vprint_assuan_status_strings): New.
(print_assuan_status_strings): New.
* agent/command.c (agent_write_status): Replace by call to new
function.
* dirmngr/server.c (dirmngr_status): Ditto.
* g13/server.c (g13_status): Ditto.
* g13/sh-cmd.c (g13_status): Ditto.
* sm/server.c (gpgsm_status2): Ditto.
* scd/command.c (send_status_info): Bump up N.
--
This fixes a potential overflow if LFs are passed to the status
string functions. This is actually not the case and would be wrong
because neither the truncating in libassuan or our escaping is not the
Right Thing. In any case the functions need to be more robust and
comply to the promised interface. Thus the code has been factored out
to a helper function and N has been bumped up correctly and checked in
all cases.
For some uses this changes the behaviour in the error case (i.e. CR or
LF passed): It will now always be C-escaped and not passed to
libassuan which would truncate the line at the first LF.
Reported-by: private_pers
* scd/app-openpgp.c (get_cached_data): Return NULL for Data Object
with no data.
--
When GET_DATA returns no data with success (90 00), this routine
firstly returned buffer with length zero, and secondly (with cache)
returned NULL, which is inconsistent. Now, it returns NULL for both
cases.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* configure.ac (HAVE_PSELECT_NO_EINTR): New.
* scd/scdaemon.c (scd_kick_the_loop): Write to pipe.
(handle_connections): Use pipe.
--
On NetBSD, signal to the same process cannot unblock pselect,
with unknown reason. Use pipe instead, for such systems.
GnuPG-bug-id: 3778
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (do_close_reader): Set NULL on close.
(bulk_in): Move DEBUGOUT and check by EP_INTR.
(ccid_get_atr): Clear powered_off flag after initial status check.
--
Many card readers automatically turn on inserted card, but some
defaults to turning off at start.
GnuPG-bug-id: 3508
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/gpg-agent.c (oListenBacklog): New const.
(opts): New option --listen-backlog.
(listen_backlog): New var.
(main): Parse new options.
(create_server_socket): Use var instead of 5.
* dirmngr/dirmngr.c: Likewise.
* scd/scdaemon.c: Likewise.
--
GnuPG-bug-id: 3473
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/logging.c: Do not build any code if we can use the gpgrt_log
functions.
(log_logv_with_prefix): Rename to log_logv_prefix and change order of
args so that this function matches its printf like counterpart
gpgrt_logv_prefix. Change all callers.
(log_debug_with_string): Rename to log_debug_string. Change all
callers.
(log_printhex): Move first arg to end so that this function matches
its printf like counterpart gpgrt_log_printhex. Change all callers.
* common/logging.h: Divert to gpgrt/libgpg-error if we can use the
gpgrt_log functions.
(bug_at): Add inline versions if we can use the gpgrt_log functions.
* configure.ac (GPGRT_ENABLE_LOG_MACROS): Add to AH_BOTTOM.
(mycflags): Add -Wno-format-zero-length.
--
This patch enables the use of the log function from libgpgrt (aka
libgpg-error). Instead of checking a version number, we enable them
depending on macros set by recent gpg-error versions. Eventually the
whole divert stuff can be removed.
The -Wno-format-zero-length is required because log_printhex can be
called with an empty format string. Note that this is fully specified
standard C behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (open_ccid_reader): Fix error handling of ccid_get_atr.
* scd/app.c (select_application): Always kick the loop if new APP.
* scd/ccid-driver.c (ccid_open_usb_reader): Don't setup at open.
(ccid_slot_status): Setup interrupt transfer when !ON_WIRE.
--
We can use the interrupt transfer to be notified about card status
change. In this case, we don't need to issue PC_to_RDR_GetSlotStatus
command. This change improve the setup the notification; it should be
done after registration of APP.
When the setup is done just after opening the USB connection (before
issuing PC_to_RDR_IccPowerOn), a reader might notifies about no card
availability (because of not yet powered on), even though the card is
ready to be powered on.
GnuPG-bug-id: 3508
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/card-util.c (current_card_status): String changes.
(change_sex): Description change.
(cmds): Add "salutation"; keep "sex" as an alias.
--
Note that we can't change the used values or tags but at least the UI
should show reflect the real purpose of the field.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (determine_rsa_response): Round bits up.
--
Co-authored-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>
Arnaud wrote:
Actually, when the incorrect expected response length (i.e. Le
field) is transmitted to the card, the card's answer is missing a
byte (i.e. ... 6101) so an additional command has to be sent to the
card to retrieve the last byte. Using the correct length avoids to
send the additional command to retrieve the missing byte, when the
computed length is wrong.
Note that an value of 65537 for E is pretty standard and thus we can
avoid the 6101 return code inmost cases.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (main): Always to the chdir.
* dirmngr/dirmngr.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
--
Note that only dirmngr did not call the chdir with --no-detach. thus
we kept it this way.
Tested gpg-agent by checking the properties shown by procexp.
Gnupg-bug-id: 2670
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
* dirmngr/dirmngr.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
* scd/scdaemon.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2670
* scd/ccid-driver.c (intr_cb): Only kick the loop for removal.
(bulk_in): Don't set POWERED_OFF when interrupt transfer is enabled.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (data_objects): Special DOs like "Login Data",
"URL", "Private DO N" can be longer size >= 256.
(struct app_local_s): Define bits for v3 card.
(get_cached_data): Use extcap.max_special_do for special DOs.
(app_select_openpgp): Detect if extcap_v3, kdf_do, and other bits.
--
GnuPG-bug-id: 3262
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-reader.c (scan_usb_device): Only for scan mode, so, rename
from scan_or_find_usb_device.
(scan_devices): Likewise. Remove support of special transport types.
(ccid_get_reader_list): Simplify.
(abort_cmd): Fix error return.
(send_escape_cmd): Fix for RESULTLEN == NULL.
(ccid_transceive_secure): Remove unnecessary var updates.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (CCID_CMD_TIMEOUT): Back to original value.
(CCID_CMD_TIMEOUT_LONGER): New.
(ccid_transceive): Add kludge for key generation.
--
At key generation of longer key size, OpenPGP card sends back "time
extension" with BWI=100, which is unusual value in the protocol and it
actually requires host having longer timeout like 43 seconds.
Reported-by: Szczepan Zalega <szczepan@nitrokey.com>
Fixes-commit: 6510df3a7cd2b5bf44fac1e4d50ee54b8c897daa
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-dinsig.c (do_sign): Remove assignment to HASHALGO.
* scd/app-p15.c (parse_keyusage_flags): Remove assign to MASK.
(read_ef_aodf): Likewise.
(read_ef_cdf): Change the control to parse_error.
* scd/app-sc-hsm.c (parse_keyusage_flags): Remove assign to MASK.
(read_ef_prkd): Remove assign to S.
(read_ef_prkd): Check if PRKDF is not null.
(read_ef_cd): Likewise for CDF.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (notify_fd): Remove.
(the_event) [W32]: New.
(main_thread_pid) [!W32]: New.
(handle_signal): Handle SIGCONT.
(scd_kick_the_loop): Use signal on UNIX and event on Windows.
(handle_connections): Likewise.
--
Code with CreateEvent is copied from gpg-agent.c.
Code for signal is copied from dkg's gpg-agent-idling in Debian.
GnuPG-bug-id: 2982
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (get_prompt_info): Change texts.
* agent/call-pinentry.c (struct entry_features): New.
(getinfo_features_cb): New.
(start_pinentry): Set new fucntion as status callback.
(build_cmd_setdesc): New. Replace all snprintf for SETDESC by this
one.
--
Suggested-by: Andre Heinecke
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/app-openpgp.c (get_prompt_info): Change wording and order
slightly.
--
The word "Card" was repeated too much in the prompt and moving
signatures to the bottom results in a more consistent layout
between the prompts with signcount and the prompts without.
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* scd/app-openpgp.c (get_disp_name): New.
(get_disp_serialno): New.
(get_prompt_info): New.
(build_enter_admin_pin_prompt): Rework the prompt texts. Factor some
code out to ...
(get_remaining_tries): New.
(verify_a_chv): Print a remaining counter also for the standard PIN.
Rework the prompt texts.
* agent/divert-scd.c (ask_for_card): Pretty format an OpenPGP serial
no.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (struct app_ctx_s): Add reset_requested.
* scd/app.c (app_reset): Locking APP, set reset_requested.
(deallocate_app): Release the lock.
(release_application): Add LOCKED_ALREADY argument.
(scd_update_reader_status_file): Hold the lock when accessing APP.
When reset_requested is set, close the reader and deallocate APP.
* scd/command.c (open_card_with_request, cmd_restart): Follow the
change of release_application.
(send_client_notifications): Here it calls release_application holding
the lock.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (release_application_internal): Remove.
(release_application): Merge release_application_internal.
(app_reset): Kick the loop and let close the reader. Sleep is
required here to wait closing.
(scd_update_reader_status_file): When APP is no use, close it.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (apdu_open_reader): Add an argument APP_EMPTY.
When CCID driver fails to open, try PC/SC if APP is nothing.
* scd/app.c (select_application): Supply arg if APP is nothing.
--
After scanning available card readers by CCID driver, scdaemon should
try PC/SC service if no APP is registered yet. Also, when the slot
is allocated for PC/SC (ccid.handle==NULL), it should not call
ccid_compare_BAI, otherwise scdaemon crashes.
Debian-bug-id: 852702, 854005, 854595, 854616
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (get_active_connection_count): New.
(start_connection_thread): Bump ACTIVE_CONNECTIONS up and down.
* scd/command.c (cmd_getinfo): Add subcommand "connections".
--
Apply gpg-agent change to scdaemon. See the commit in 2016-08-06:
40d16029ed8b334c371fa7f24ac762d47302826e
Then, add kicking the loop, so that main loop can notice the change of
the connection.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (ticker_disabled): Remove.
(handle_tick, need_tick): Remove.
(handle_connections): Don't check ticker_disabled.
--
Now, removal of device/card is only done by the function
scd_update_reader_status_file, it should be called if needed.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (select_application): Fix the logic if periodical check is
needed. If it is needed for newly found device(s), kick the loop.
(scd_update_reader_status_file): Return value if select(2) should be
called with timeout.
* scd/ccid-driver.c (ccid_require_get_status): Don't return 0 for
token with no interrupt transfer for now.
* scd/command.c (open_card_with_request): Fix scan by SERIALNO.
* scd/scdaemon.c (update_usb): Remove.
(handle_connections): Evaluate need_tick after handle_tick.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (get_status_reader): Add ON_WIRE arg, here.
(ct_get_status, pcsc_get_status_direct, pcsc_get_status_wrapped)
(pcsc_get_status, get_status_ccid, my_rapdu_get_status): Likewise.
(reset_pcsc_reader_wrapped, open_pcsc_reader_wrapped): Follow the
change.
(apdu_get_status_internal): It's lower-level driver which judge
it's not needed. Otherwise, it can't detect the removal.
* scd/ccid-driver.c (ccid_slot_status): After the POWERED_OFF check,
we can skip sending GetSlotStatus packet on wire, when no need.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
Fixes-commit: c8eee4d396a751d41fd1ee1e1b87b851fca172a
* scd/ccid-driver.c (do_close_reader): Don't lock events, but check the
return value of libusb_cancel_transfer.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-common.h (struct app_ctx_s): Rename field to
periodical_check_needed.
* scd/scdaemon.c (update_usb): Rename from update_fdset_for_usb.
Don't use libusb_get_pollfds any more.
(scd_kick_the_loop): New.
(need_tick): Follow the rename.
(handle_connections): No libusb event handling here.
* scd/app.c (app_new_register): Follow the change of rename.
(select_application, scd_update_reader_status_file): Likewise.
* scd/ccid-driver.c (ccid_usb_thread_is_alive): New.
(intr_cb): Call scd_kick_the_loop.
(ccid_usb_thread): New. Thread to invoke INTERRUPT callback.
(ccid_open_usb_reader): Add thread invocation.
(ccid_require_get_status): Remove
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP.
(do_close_reader): Carefully handle handle->transfer.
(get_escaped_usb_string): Insert npth_unprotect/npth_protect.
(do_close_reader, bulk_out, bulk_in, abort_cmd, ccid_slot_status)
(ccid_transceive, ccid_transceive_secure): Likewise.
--
It found that libusb_get_pollfds is not supported on Windows.
Besides, it's a bit difficult to use for the select loop.
Thus, we use the thread named ccid_usb_thread, instead.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c(struct reader_table_s): Add require_get_status.
(apdu_connect): Change return value meaning. Call apdu_reset here.
* scd/app.c (app_new_register): Add require_get_status.
(select_application): Use the return value of apdu_connect.
(scd_update_reader_status_file): Call update_fdset_for_usb with
checking all_have_intr_endp.
(app_list_start, app_list_finish): Remove.
* scd/ccid-driver.c (struct ccid_driver_s): Add transfer.
(intr_cb): Don't call libusb_transfer in this callback.
(ccid_require_get_status): New.
(do_close_reader): Call libusb_transfer here.
* scd/scdaemon.c (update_fdset_for_usb): Remove the first argument.
--
With Gnuk Token, it works fine as expected. With Gemalto reader,
intr_cb is not called when card is removed. So, the macro
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP is not defined yet.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (update_fdset_for_usb): Wake up the select(2).
(handle_connections): Use a kind of "self-pipe" technique.
--
Use pipe to wake up select(2). If UNIX-only, signal could be used. For
portability, "self-pipe" is better, here. Setup for non-blocking for
pipe fds are not needed, because speed of USB device insertion is
limited by human physical interaction; No one can do hundreds of
device insertion/removal-s per second.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/logging.c (do_logv): Remove extra parentheses in comparison.
* dirmngr/dns-stuff.c (resolve_addr_libdns): Init RES so that
dns_res_close is given a defined value in the error case.
* dirmngr/http.c (cookie_read, cookie_write) [HTTP_USE_NTBTLS]: Fix
format string char.
* dirmngr/ks-engine-hkp.c (ks_hkp_help): Remove duplicate "const".
* dirmngr/ks-engine-http.c (ks_http_help): Ditto.
* dirmngr/ks-engine-kdns.c (ks_kdns_help): Ditto.
* dirmngr/ks-engine-ldap.c (ks_ldap_help): Ditto.
* scd/app-p15.c (send_keypairinfo, do_getattr): Fix format string
char.
* tools/gpgconf-comp.c (gpg_agent_runtime_change): Init PID for the
error case.
(scdaemon_runtime_change): Ditto.
(dirmngr_runtime_change): Ditto.
* tools/gpgconf.c (query_swdb): Init VALUE_SIZE_UL.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_get_serial_and_stamp): Remove.
(app_get_serialno): New.
(app_write_learn_status): Use send_status_direct.
(app_getattr): Use app_get_serialno for SERIALNO and
send with send_status_direct.
* scd/app-openpgp.c (do_getattr): Likewise.
* scd/command.c (cmd_serialno): Don't send TIMESTAMP of 0.
(cmd_learn): Likewise. Don't inquire with TIMESTAMP of 0.
--
In the SERIALNO protocol, timestamp used to be considered, but had never
used at all. In the new implementation, removed card/token is always
detected and connection becomes invalid, no timestamp is required any
more. Examined scute and poldi as well for this protocol change.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (select_application): Add SERIALNO_BIN and SERIALNO_BIN_LEN
arguments. Return matched APP with a serial number when specified.
* scd/command.c (open_card): Modify for the implicit open only.
(open_card_with_request): New for explicit open and support match with a
serial number.
(cmd_serialno): Support --demand option.
(cmd_learn, cmd_readcert, cmd_readkey, cmd_pksign, cmd_pkauth)
(cmd_pkdecrypt, cmd_getattr, cmd_setattr, cmd_writecert, cmd_writekey)
(cmd_genkey, cmd_random, cmd_passwd, cmd_checkpin, cmd_apdu): Follow
the change of open_card.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (apdu_dev_list_finish): Don't call ccid_dev_scan_finish
with no table.
(apdu_open_reader): Only increment when it's zero.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (new_reader_slot): Lock is now in apdu_dev_list_start.
(close_pcsc_reader_direct, close_ccid_reader): RDRNAME is handled...
(apdu_close_reader): ... by this function now.
(apdu_prepare_exit): Likewise.
(open_ccid_reader): Open with dev_list.
(apdu_dev_list_start, apdu_dev_list_finish): New.
(apdu_open_one_reader): New.
(apdu_open_reader): Support multiple readers.
* scd/app.c (select_application): With SCAN, opening all readers
available, and register as new APP.
(app_write_learn_status): app->ref_count == 0 is valid for APP which is
not yet used.
(app_list_start, app_list_finish): New.
* scd/ccid-driver.c (struct ccid_driver_s): Remove RID and BCD_DEVICE.
Add BAI.
(parse_ccid_descriptor): BCD_DEVICE is now on the arguments.
(ccid_dev_scan, ccid_dev_scan_finish): New.
(ccid_get_BAI, ccid_compare_BAI, ccid_open_usb_reader): New.
(ccid_open_reader): Support multiple readers.
(ccid_set_progress_cb, ccid_close_reader): No RID any more.
--
With this change, multiple readers/tokens are supported by the internal
CCID driver of GnuPG. Until the changes of upper layers (scdaemon,
gpg-agent, and gpg front end), only a single reader is used, though.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (scan_or_find_usb_device): Don't scan for
configuration but use active configuration. Support alt_setting.
(scan_or_find_devices): Support alt_setting.
(ccid_open_reader): Support alt_setting.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (reader_table_lock, apdu_init): New.
(new_reader_slot): Serialize by reader_table_lock.
* scd/app.c (lock_app, unlock_app, app_new_register): Fix error code
usage.
(initialize_module_command): Call apdu_init.
* scd/scdaemon.c (main): Handle error for initialize_module_command.
--
This is a long standing bug. There are two different things; The
serialization of allocating a new SLOT, and the serialization of using
the SLOT. The latter was implemented in new_reader_slot by lock_slot.
However, the former was not done. Thus, there was a possible race where
a same SLOT is allocated to multiple threads.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (lock_app): Rename from lock_reader and use internal field
of APP.
(unlock_app): Likewise.
(app_dump_state): Use APP.
(application_notify_card_reset): Remove.
(check_conflict): Change API for APP, instead of SLOT.
(check_application_conflict): Likewise.
(release_application_internal): New.
(app_reset): New.
(app_new_register): New.
(select_application): Change API for APP, instead of SLOT.
(deallocate_app, release_application): Modify for manage link.
(report_change): New.
(scd_update_reader_status_file): Moved from command.c and
use APP list, instead of VREADER.
(initialize_module_command): Moved from command.c.
* scd/command.c (TEST_CARD_REMOVAL): Remove.
(IS_LOCKED): Simplify.
(vreader_table): Remove.
(vreader_slot, update_card_removed): Remove.
(do_reset): Call app_reset.
(get_current_reader): Remove.
(open_card): Add SCAN arg.
(cmd_serialno): No retry, since retry is done in lower layer in apdu.c.
No do_reset, since it is done in lower layer.
Add clearing card_removed flag.
(cmd_disconnect): Call apdu_disconnect.
(send_client_notifications): Modify for APP.
(update_reader_status_file): Remove.
--
APP is the abstraction of the card application. For management of
cards, it is better to focus on the APP instead of the physical reader.
This change makes support of multiple card/token easier.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (struct reader_table_s): Remove any_status, last_status,
status, and change_counter field.
(new_reader_slot, dump_reader_status, ct_activate_card, open_ct_reader)
(connect_pcsc_card, open_pcsc_reader_direct, open_pcsc_reader_wrapped)
(open_ccid_reader, apdu_reset): Follow the change.
(ct_dump_reader_status): Remove.
(apdu_get_status_internal, apdu_get_status): Remove CHANGED arg.
(apdu_connect): Follow the change.
* scd/command.c (struct vreader_s): Remove reset_failed, any, and
changed field.
(cmd_getinfo, update_reader_status_file): Follow the change.
--
In the past, scdaemon monitors card insertion (as well as removal), so
the code has been complicated, and there has been duplication in two
layers. Now, it only monitors card removal, it's now simplified.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (scan_or_find_usb_device): Fix return value.
Support device with multiple CCID interfaces. Fix the case with
READERNO. Support partial string match of "reader-port" like PC/SC
driver.
--
I don't know any device with multiple CCID interfaces, though.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-common.h (app_readcert, app_readkey, app_setattr, app_sign,
app_auth, app_decipher, app_get_challenge, app_check_pin): Add CTRL as
the second argument.
* scd/app.c: Supply CTRL to lock_reader calls.
* scd/command.c (cmd_readcert, cmd_readkey, cmd_pksign, cmd_auth,
cmd_pkdecrypt, cmd_setattr, cmd_random, cmd_checkpin): Follow the
change.
--
APP is an abstraction of the "card application". Most methods of APP
should have CTRL argument to report back progress to the session. This
change fixes FIXMEs for missing CTRL.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/openpgp-oid.c (openpgp_is_curve_supported): Add optional arg
R_ALGO and change all callers.
* common/util.h (GPG_ERR_UNKNOWN_FLAG): New error code.
* g10/options.h (struct opt): Add field DEF_NEW_KEY_ALGO.
* g10/gpg.c (oDefaultNewKeyAlgo): New enum.
(opts): New option "--default-new-key-algo".
(main): Set the option.
* g10/keygen.c: Remove DEFAULT_STD_ FUTURE_STD_ constants and replace
them by ...
(DEFAULT_STD_KEY_PARAM, FUTURE_STD_KEY_PARAM): new string constants.
(get_keysize_range): Remove arg R_DEF and return that value instead.
Change all callers.
(gen_rsa): Use get_keysize_range instead of the removed
DEFAULT_STD_KEYSIZE.
(parse_key_parameter_part): New function.
(parse_key_parameter_string): New function.
(quick_generate_keypair): Refactor using parse_key_parameter_string.
(generate_keypair): Ditto.
(parse_algo_usage_expire): Ditto.
--
This new option is intended to be used in the forthcoming
--set-profile command of gpgconf. It allows to provide a gpg
configuration with custom defaults for a new key using the simple
commands which use the default algorithm set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (struct app_local_s): Remove max_cmd_data and
max_rsp_data fields as Extended Capabilities bits are different.
(get_cached_data) Use extcap.max_certlen_3.
(get_one_do): Don't use exmode=1.
(determine_rsa_response): New.
(get_public_key, do_genkey): Call determine_rsa_response.
(do_sign): Use keyattr[0].rsa.n_bits / 8, instead of max_rsp_data.
(do_auth): Use keyattr[2].rsa.n_bits / 8, instead of max_rsp_data.
(do_decipher): Likewise with Use keyattr[1].rsa.n_bits / 8.
(show_caps): Remove max_cmd_data and max_rsp_data.
(app_select_openpgp): Likewise.
--
OpenPGP card V3 had introduced incompatible change in Extended
Capabilities bits. We can work around by this change by not
using those bits.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (send_le): Fix the size, adding two for status
bytes to Le.
--
This is long standing bug. So far, Le was not exact value.
Since forthcoming change will introduce exact value of expected length
of response data, this change is needed.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (pcsc_vendor_specific_init): Only check vender ID.
--
Some other products by Cherry works with pinpad, although it only works
for smaller keys (RSA 1024). TPDU support is good for larger keys.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* dirmngr/dirmngr.c (main): Before calling setsid do not close the
standard fds but connect them to /dev/null.
* scd/scdaemon.c (main): Ditto. Noet that the old test for a log
stream was even reverted.
--
Note that this was fixed for gpg-agent 10 years ago on 2006-11-09.
Signed-off-by: Werner Koch <wk@gnupg.org>
There were several different variant spellings of "passphrase". This
should fix them all for all English text.
I did notice that po/it.po contains multiple instances of
"passhprase", which also looks suspect to me, but i do not know
Italian, so i did not try to correct it.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* scd/app-openpgp.c (do_decipher): When it's x-coordinate only, add the
prefix 0x41.
--
Card should return fixed size bytes, either in format of
(04 || X || Y) or (X, x-coordinate only).
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (send_key_attr): Use curve instead of OID.
(ecdh_params): New.
(ecc_read_pubkey): Use ecdh_params. Use curve name.
(ecc_writekey): Likewise.
(ecc_curve): Rename from ecc_oid.
(parse_algorithm_attribute): Use ecc_curve.
* g10/call-agent.c (learn_status_cb): Use openpgp_is_curve_supported to
intern the curve name string.
* g10/card-util.c (card_status): Conver curve name to alias for print.
--
Now, sdcaemon answer for KEY-ATTR is in the canonical curve name
instead of the alias. Since it is used of key generation for
card encryption key with backup, it should be canonical name.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keygen.c (generate_keypair): For card key generation, fill
parameters by KEY-ATTR.
* scd/app-openpgp.c (ecc_read_pubkey): OID should be freed at last,
after its reference by OIDBUF is finished.
(ecc_writekey): Likewise.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (rsa_read_pubkey, ecc_read_pubkey): New.
(read_public_key): New.
(get_public_key, do_genkey): Use read_public_key.
--
With this change, since GENKEY updates the public key (pk[keyno].key) in
APP, READKEY will be possible after the command even for the old
card (version <= 0x0100).
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (get_public_key): Fix a message.
(change_keyattr_from_string, ecc_writekey): Call mpi_release sooner.
(do_genkey): Add ECC support.
--
In OpenPGP card specification 3.0, ECC is introduced. So far, do_genkey
only supported RSA. Since KDF spec. is needed to calculate the
fingerprint, it is hard coded in app-openpgp.c. But it's defined by
OpenPGP ECC (RFC-6637), and card does nothing with KDF in fact.
Co-authored-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/iso7816.c (do_generate_keypair): Use const char * for DATA.
(iso7816_generate_keypair, iso7816_read_public_key): Likewise.
* scd/app-openpgp.c (get_public_key): Follow the change.
(do_genkey): Ditto. Use ERR instead of RC. Use u32 for CREATED_AT.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (build_ecc_privkey_template): Size can be greater
than 128 when it comes with public key for curve of larger field.
--
Reported-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/gpg-agent.c (thread_init_once, initialize_modules): New.
(main): Make sure no daemonizing-fork call after npth_init, and no npth
calls before npth_init, with care of npth calls by assuan hooks.
* dirmngr/dirmngr.c (thread_init): New.
(main): Make sure npth_init must not be called before daemonizing fork.
* scd/scdaemon.c (main): Likewise.
--
It is simply the best for nPth not to allow the daemonizing fork after
npth_init, because semantics and implementations of forked child process
in a threaded application is a difficult corner case.
GnuPG-bug-id: 1779
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (ECC_FLAG_PUBKEY): New.
(send_key_attr, get_public_key, ecc_writekey, do_auth, do_decipher)
(parse_algorithm_attribute): Check ECC_FLAG_DJB_TWEAK.
(build_ecc_privkey_template): Add ECC_Q and ECC_Q_LEN.
Support offering public key when ECC_FLAG_PUBKEY sets.
(ecc_writekey): Supply ECC_Q and ECC_Q_LEN.
(parse_algorithm_attribute): Parse pubkey-required byte.
--
OpenPGPcard protocol specification version 3.2 supports algorithm
attributes for ECC key which specifies public key data is required for
"keytocard" command. This change supports the feature.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/asshelp.c (my_log_monitor): New var.
(my_libassuan_log_handler): Run that monitor.
(setup_libassuan_logging): Add arg to set a log monitor and change all
callers.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (update_card_removed): Call apdu_close_reader here.
--
This is update of the commit 8fe81055762d9c9e6f03fb7853a985c94ef73ac3
It is better apdu_close_reader is called in update_card_removed.
The commit 1598a4476466822e7e9c757ac471089d3db4b545 introduced a
regression, it doesn't close the reader after removal of the card, while
the code before the commit call apdu_close_reader in do_reset.
So, this fix.
GnuPG-bug-id: 2449
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/preset-passphrase.c, agent/protect-tool.c, dirmngr/dirmngr.c
* dirmngr/t-http.c, g10/gpg.c, g10/gpgv.c, g13/g13-syshelp.c
* g13/g13.c, kbx/kbxutil.c, scd/scdaemon.c, sm/gpgsm.c
* tests/gpgscm/main.c, tools/gpg-check-pattern.c
* tools/gpg-connect-agent.c, tools/gpgconf.c, tools/gpgtar.c
* tools/symcryptrun.c: Invoke log_set_prefix() with
human-readable labels.
--
Some invocations of log_set_prefix() were done with raw numeric values
instead of values that humans can understand. Use symbolic
representations instead of numeric for better readability.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/init.c (init_common_subsystems): Initialize libgcrypt.
* dirmngr/Makefile.am (dirmngr_ldap): Link with libgcrypt.
--
Most other modules already call gcry_check_version() after
init_common_subsystems() so may as well move initialization of libgcrypt
to here. Also fixes a warning in the system log from gpgconf --homedir.
Signed-off-by: Ben Kibbey <bjk@luxsci.net>
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
with clearer text.
In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something. When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.
These changes should make the language a bit clearer.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* scd/app.c (application_notify_card_reset): Add message for debug.
*scd/command.c (update_card_removed): Call release_application and set
SLOT -1 here.
(struct server_local_s): Remove app_ctx_marked_for_release.
(do_reset): Don't mark release but call release_application here.
(open_card): Remove app_ctx_marked_for_release handling.
(update_reader_status_file): Don't set SLOT here, so that it can be
released the APP by application_notify_card_reset in
update_card_removed.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/command.c (do_reset, cmd_restart): Reset app_ctx before calling
release_application.
--
Thanks to Ben Warren for the report.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* (parse_ccid_descriptor): nonnull_nad = 0 for all GEMPC device.
--
We can't use the driver for 08E6:3438, while it works well under PC/SC
service. I found that the library of ccid always uses the node
address = ZERO for all transactions. So, we extend the same handling
for not only GEMPC_CT30, but also for all its devices.
Debian-bug-id: 814584
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (opts): Add --homedir.
--
Without that entry the homedir setting won't work.
GnuPG-bug-id: 2386
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (create_server_socket): Call chmod before listen.
* scd/scdaemon.c (create_server_socket): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
--
This is just in case of a improperly set umask. Note that a connect
requires a write permissions.
* agent/gpg-agent.c (remove_socket): Do not remove the enclosing
directory.
* scd/scdaemon.c (cleanup): Ditto.
--
The socket directory is now below /run or at ~/.gnupg. Thus we should
not try to remove the directory of the socket. The auto-removal was
introduced at a time we used a temporary directory for the sockets.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (LIBUSB_CPPFLAGS): New.
* scd/Makefile.am (AM_CPPFLAGS): Add LIBUSB_CPPFLAGS.
* scd/ccid-driver.c: Use libusb 1.0 API.
--
Changes are straightforward, not use any new features.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (do_genkey): Strip leading zeros for fingerprint
computation.
--
This bug is difficult to reproduce because the probability is 1/256,
and key generation takes long time. The regression was introduced
when we add the support for ECC.
GnuPG-bug-id: 2150
* scd/apdu.c (pcsc_error_to_sw): map PCSC_E_NO_SERVICE and
PCSC_E_SERVICE_STOPPED to the internal SW_HOST_NO_READER error code.
--
Signed-off-by: Daniel Hoffend <dh@dotlan.net>
GnuPG-bug-id: 2167
In Windows 8 (and later), PC/SC service only runs when reader/token is
plugged in. After its removal, it returns PCSC_E_NO_SERVICE error.
This error should be handled as no reader. This comment is by gniibe.
* scd/app.c (lock_table): Remove LAST_APP field.
(lock_reader, app_dump_state, application_notify_card_reset)
(release_application): Follow the change.
(check_conflict): New.
(check_application_conflict): Lock the slot and call check_conflict.
(select_application): Call check_conflict and not use LAST_APP.
--
We don't need LAST_APP field but just keep the application context by
APP field. Since we have a reference counter, it is possible if we
can deallocate or not.
* scd/app-openpgp.c (do_decipher): Handle trancated cipher text.
Also fix xfree bug introduced.
--
In old format with no prefix, cipher text can be trancated when it
is parsed as MPI. Recover the value adding back zeros.
Fixes-commit: 11b2691eddc42e91651e4f95dd2731255a3e9211
* scd/app-openpgp.c (do_decipher): Check 0x02 also for 16+1 byte long
INDATA.
(do_decipher): Fix integer arithmetic in void pointer.
(do_decipher): Add missing memcpy.
--
I have not tested this fix but it is obvious.
Fixes-commit: 11b2691eddc42e91651e4f95dd2731255a3e9211
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (apdu_close_reader): Call CLOSE_READER method even if we
got an error from apdu_disconnect.
* scd/app-common.h (no_reuse): Remove.
* scd/app.c (application_notify_card_reset): Deallocate APP here.
(select_application, release_application): Don't use NO_REUSE.
--
Reproducible scenario: Invoke gpg --card-edit session from a terminal.
Invoke another gpg --card-edit session from another. Remove a token.
Insert a token again. Type RET on both terminals. One of terminal
answers "Conflicting usage".
Perhaps, having NO_REUSE field was to avoid race conditions. Now,
APP can be safely deallocated by application_notify_card_reset.
Thanks to the2nd.
* scd/app-openpgp.c (get_public_key): Improve error handling.
--
Found using the Clang Static Analyzer.
Signed-off-by: Justus Winter <justus@g10code.com>
* scd/ccid-driver.c (bulk_out): Use LIBUSB_ERRNO_NO_SUCH_DEVICE.
--
With libusb-compat library, the error is different than original
libusb. (The libusb-compat library is used by Fedora.)
* scd/ccid-driver.c (CCID_CMD_TIMEOUT): New.
(ccid_transceive_apdu_level, ccid_transceive): Use.
--
It is reported that key generation causes timeout with OpenPGPcard
v2.1. Ideally, timeout value could be determined at run-time by
examining card's ATR. Compile-time fixed value is OK for internal
CCID driver.
* scd/app-openpgp.c (change_rsa_keyattr): New.
(change_keyattr_from_string): Use change_rsa_keyattr.
(rsa_writekey): Call change_rsa_keyattr when different size.
(ecc_writekey): Try to change key attribute.
* agent/cvt-openpgp.c (get_keygrip): Handle Curve25519.
(convert_secret_key, convert_transfer_key): Ditto.
* common/openpgp-oid.c (oidtable): Add Curve25519.
(oid_crv25519, openpgp_oid_is_crv25519): New.
* common/util.h (openpgp_oid_is_crv25519): New.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Handle the case
with Montgomery curve which uses x-only coordinate.
* g10/keygen.c (gen_ecc): Handle Curve25519.
(ask_curve): Change the API and second arg is to return subkey algo.
(generate_keypair, generate_subkeypair): Follow chage of ask_curve.
* g10/keyid.c (keygrip_from_pk): Handle Curve25519.
* g10/pkglue.c (pk_encrypt): Handle Curve25519.
* g10/pubkey-enc.c (get_it): Handle the case with Montgomery curve.
* scd/app-openpgp.c (ECC_FLAG_DJB_TWEAK): New.
(send_key_attr): Work with general ECC, Ed25519, and Curve25519.
(get_public_key): Likewise.
(ecc_writekey): Handle flag_djb_tweak.
--
When libgcrypt has Curve25519, GnuPG now supports Curve25519.
* common/openpgp-oid.c (openpgp_oid_to_curve): Add CANON argument.
* common/util.h: Update.
* g10/import.c (transfer_secret_keys): Follow the change.
* g10/keyid.c (pubkey_string): Likewise.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Likewise.
* parse-packet.c (parse_key): Likewise.
* scd/app-openpgp.c (send_key_attr, get_public_key): Likewise.
--
Change the function so that caller can select canonical name of curve
or name for printing. Suggested by wk.
* scd/app-openpgp.c (send_key_attr): Send KEYNO.
(get_public_key): Fix SEXP composing.
(ecc_writekey): Fix OID length calculation.
(ecc_oid): Prepend the length before query.
(parse_algorithm_attribute): Handle the case the curve is not available.
* common/util.h: Provide replacement for GPGRT_ATTR_ macros when using
libgpg-error < 1.20.
* common/mischelp.h: Ditto.
* common/types.h: Ditto.
--
Given that libgpg-error is a dependency of all GnuPG related libraries
it is better to define such macros at only one place instead of having
similar macros at a lot of places. For now we need repalcement
macros, though.
* g10/call-agent.h (struct agent_card_info_s): Add curve field.
* g10/call-agent.c (learn_status_cb): Use curve name.
* g10/card-util.c (card_status): Show pubkey name.
* scd/app-openpgp.c (struct app_local_s): Record OID and flags.
(store_fpr): Use ALGO instead of key type.
(send_key_attr): Use curve name instead of OID.
(get_public_key): Clean up by OID to curve name.
(ecc_writekey): Support any curves in libgcrypt.
(do_genkey, do_auth, ): Follow the change.
(ecc_oid): New.
(parse_algorithm_attribute): Show OID here.
* g10/card-util.c (do_change_keysize): Put "rsa".
* scd/app-openpgp.c (change_keyattr, change_keyattr_from_string):
Change the command format.
(rsa_writekey): Check key type.
(do_writekey): Remove "ecdh" and "ecdsa" support which was available
in experimental libgcrypt before 1.6.0.
* scd/Makefile.am (sc_copykeys_*): Remove.
* scd/sc-copykeys.c: Remove.
* scd/pcsc-wrapper.c: Remove.
* scd/{card-common.h,card-dinsig.c,card-p15.c,card.c}: Remove.
--
sc-copykeys doesn't work any more because it's based on old API.
pcsc-wrapper has gone because of nPth which is compatible to pthreads.
The card* files are old files, now we have app*.
* g13/g13.c: Make use of debug_parse_flag.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto
* agent/gpg-agent.c: Ditto. But do not terminate on "help"
* dirmngr/dirmngr.c: Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/adpu.c (pcsc_pinpad_verify, pcsc_pinpad_modify): Bigger buffer
for TPDU card reader.
--
GnuPG-bug-id: 2003, 2004
This is needed for PC/SC on Debian Jessie. Note that it's not only
for Cherry ST-2000, but also, for any TPDU card readers.
* scd/apdu.c (pcsc_vendor_specific_init): Set pinmax to 15.
* scd/ccid-driver.c (ccid_transceive_secure): Add zero for the
template of APDU.
--
GnuPG-bug-id: 2003, 2004
* scd/apdu.c (open_pcsc_reader_direct): Partial string match.
--
The card reader name by PC/SC service might include USB bus,
which varies (on some platform like GNU/Linux). Thus, it's
better to match partial string.
Original patch was submitted by anstein. I changed it to fallback to
the first reader if no match found.
Note that we need to change pcsc-wrapper.c in 2.0 backport.
GnuPG-bug-id: 1618, 1930
* scd/apdu.c (send_le): Bug fix for not append Z when lc<0&&le<0.
* scd/app-common.h (struct app_ctx_s): Use bit fields for flags.
* scd/ccid-driver.c (CCID_MAX_BUF): New. Only for OpenPGPcard.
(struct ccid_driver_s): New field of max_ccid_msglen.
Remove ifsd field.
(parse_ccid_descriptor): Initialize max_ccid_msglen.
(ccid_transceive_apdu_level): Implement sending extended APDU in
chain of CCID message.
--
With this patch, we won't need PC/SC library/service any more.
GnuPG-bug-id: 1947
* agent/pksign.c (agent_pksign_do): Use int.
* scd/app-openpgp.c (get_public_key): Likewise.
--
On 64-bit architecture, int and size_t might be different.
For the first argument for '%b', int is expected.
* common/host2net.h (buf16_to_ulong, buf16_to_uint): New.
(buf16_to_ushort, buf16_to_u16): New.
(buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New.
--
Commit 91b826a38880fd8a989318585eb502582636ddd8 was not enough to
avoid all sign extension on shift problems. Hanno Böck found a case
with an invalid read due to this problem. To fix that once and for
all almost all uses of "<< 24" and "<< 8" are changed by this patch to
use an inline function from host2net.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (store_fpr): Remove CARD_VERSION from the
arguments.
(rsa_writekey): Follow the change.
(do_genkey): Likewise.
(ecc_writekey): Likewise. Cast to size_t.
--
KEYTOCARD caused SEGV of scdaemon on 64-bit arch. That's because
int is 32-bit, but size_t is 64-bit.
* scd/ccid-driver.c (send_escape_cmd): Fix setting of 'rc'.
--
Variable 'rc' in send_escape_cmd was overwritten before it was
returned, leading to incorrect computation.
Signed-off-by: Joshua Rogers <git@internot.info>
[Log entry reformatted - wk]
(cherry picked from commit 3d9f8bf1dc0c7165a5d2a31568ed425d2dc3b91e)
* scd/pcsc-wrapper.c (handle_transmit): Enlarge buffer to 4096 too
allow for larger certificates.
--
Cherry-pick from 5798673156a66f4c39e1d34e358b03539194d57c.
Forward ported from 2.0.
* scd/app-openpgp.c (get_public_key): correctly close 'fp' upon use.
--
Inside the get_public_key function, 'fp' was opened using popen, but
incorrectly closed using fclose.
Debian-Bug-Id: 773474
* scd/command.c (cmd_readkey): avoid double-free of cert
--
When ksba_cert_new() fails, cert will be double-freed.
Debian-Bug-Id: 773471
Original patch changed by wk to do the free only at leave.
* agent/divert-scd.c (divert_pkdecrypt): Support ECDH.
* scd/app-openpgp.c (get_algo_byte, store_fpr): Support ECDH.
(send_key_attr): Support ECDH. Fix EdDSA algorithm value.
(retrieve_key_material): Initialize fields.
(get_public_key, ecc_writekey, do_writekey): Support ECDH.
(ecdh_writekey): Remove.
(do_decipher): Support ECDH.
(parse_algorithm_attribute): Support ECDH. Fix EdDSA.
--
Following the gpg-agent protocol, SCDaemon's counter part is now
implemented.
* common/util.h (GPG_ERR_OBJ_TERM_STATE): New.
* scd/iso7816.c (map_sw): Add this error code.
* scd/app-openpgp.c (do_getattr): Return the life cycle indicator.
* scd/app.c (select_application): Allow a return value of
GPG_ERR_OBJ_TERM_STATE.
* scd/scdaemon.c (set_debug): Print the DBG_READER value.
* g10/call-agent.c (start_agent): Print a status line for the
termination state.
(agent_scd_learn): Make arg "info" optional.
(agent_scd_apdu): New.
* g10/card-util.c (send_apdu): New.
(factory_reset): New.
(card_edit): Add command factory-reset.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/scdaemon.c (ENAMETOOLONG): New.
(redir_socket_name): New.
(cleanup): Take care of a redirected socket.
(main): Pass redir_socket_name to create_server_socket.
(create_socket_name): Remove superfluous length check.
(create_server_socket): Add arg r_redir_name and implement
redirection. Replace assert for older Assuan by an error message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* gl/: Remove entire tree.
* configure.ac: Remove gnulib tests and the gl/ Makefile.
(setenv): Add to AC_CHECK_FUNCS.
* autogen.rc (extra_aclocal_flags): Set to empty.
* Makefile.am (ACLOCAL_AMFLAGS): Remove -I gl/m4
(SUBDIRS): Remove gl/.
* agent/Makefile.am (common_libs): Remove ../gl/gnulib.a
* common/Makefile.am (t_common_ldadd): Ditto.
* dirmngr/Makefile.am (dirmngr_LDADD): Ditto.
(dirmngr_ldap_LDADD, dirmngr_client_LDADD): Ditto.
* g10/Makefile.am (needed_libs): Ditto.
* g13/Makefile.am (g13_LDADD): Ditto.
* kbx/Makefile.am (kbxutil_LDADD): Ditto.
($(PROGRAMS)): Ditto.
* scd/Makefile.am (scdaemon_LDADD): Ditto.
* sm/Makefile.am (common_libs): Ditto.
* tools/Makefile.am (common_libs, commonpth_libs): Ditto.
* agent/gpg-agent.c: Remove "mkdtemp.h"
* g10/exec.c: Ditto.
* scd/scdaemon.c: Ditto.
* tools/symcryptrun.c: Ditto.
* common/sysutils.c: Remove "setenv.h"
* common/t-timestuff.c: Use putenv if setenv is not available.
--
gnulib has always been a cause of trouble in GnuPG because we used
only a very few functions and the complex include machinery of gnulib
is quite complex and the cause for many build problems for example on
OS X. This is not gnulib's fault but due to our limited use of gnulib
and that we only rarely update the gnulib code to avoid regressions.
In part two we will address the functions
mkdtemp
setenv
unsetenv
strpbrk
which may bot be implemented on all platforms. They are not required
on a libc based system.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Also fixed some of my own copyright notices due to the termination of
my assignment. The one displayed by --version is kept at FSF because
we had contributors in 2014 with FSF assignments and it gives the FSF
some visibility.
* agent/agent.h (opt): Remove field use_standard_socket.
* agent/command.c (cmd_killagent): Always allow killing.
* agent/gpg-agent.c (main): Turn --{no,}use-standard-socket and
--write-env-file into dummy options. Always return true for
--use-standard-socket-p. Do not print the GPG_AGENT_INFO envvar
setting or set that envvar.
(create_socket_name): Simplify by removing non standard socket
support.
(check_for_running_agent): Ditto.
* common/asshelp.c (start_new_gpg_agent): Remove GPG_AGENT_INFO use.
* common/simple-pwquery.c (agent_open): Ditto.
* configure.ac (GPG_AGENT_INFO_NAME): Remove.
* g10/server.c (gpg_server): Do not print the AgentInfo comment.
* g13/server.c (g13_server): Ditto.
* sm/server.c (gpgsm_server): Ditto.
* tools/gpgconf.c (main): Simplify by removing non standard socket
support.
--
The indented fix to allow using a different socket than the one in the
gnupg home directory is to change Libassuan to check whether the
socket files exists as a regualr file with a special keyword to
redirect to another socket file name.
* scd/app-sc-hsm.c: Re-indendet some parts and set some vars to NULL
after xfree for improbed robustness.
(read_ef_prkd): Replace serial operator by blocks for better
readability.
(apply_PKCS_padding): Rewrite for easier auditing.
(strip_PKCS15_padding): Ditto. Add stricter check on SRCLEN.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-sc-hsm.c (select_and_read_binary): Use SW_ macro.
(parse_certid): Remove useless test.
(send_certinfo, send_keypairinfo): Shrink malloc to the needed size.
(do_getattr): Ditto.
(verify_pin): Use SW_ macro.
(do_decipher): Replace OFS variable and extend comment.
--
Code parts which have not been audited are marked with a warning
pragma.
* scd/app-sc-hsm.c: New.
* scd/app.c (select_application, get_supported_applications): Register
new app.
--
Add a read/only driver for scdaemon that provides access to keys and
certificates on a SmartCard-HSM (www.smartcard-hsm.com).
The driver supports RSA and ECC keys on SmartCard-HSM cards and
USB-Sticks.
The driver does not yet support the MicroSD edition.
--
ChangeLog and FSF copyright year fix by wk.
* scd/ccid-driver.h (VENDOR_REINER, CYBERJACK_GO): New.
* scd/ccid-driver.c (ccid_transceive_secure): Handle the case for
VENDOR_REINER. Original work was by Alina Friedrichsen (tiny change).
--
This is revised version which adapts changes of ccid-driver and was
later ported from branch-2.0 to master (2.1)
* configure.ac (HAVE_NPTH): New ac_define.
* common/estream.c: Use USE_NPTH instead of HAVE_NPTH.
* common/http.c: Ditto. Replace remaining calls to pth by npth calls.
(connect_server): Remove useless _().
* common/exechelp-posix.c, common/exechelp-w32.c
* common/exechelp-w32ce.c: Use HAVE_PTH to include npth.h.
* common/init.c (_init_common_subsystems): Remove call to pth_init.
* common/sysutils.c (gnupg_sleep): Use npth_sleep.
* scd/ccid-driver.c (my_sleep): Ditto.
--
USE_NPTH is used in case were we may build with and without nPth. The
missing definition HAVE_NPTH didn't allowed us to build outher sources
with nPTh support.
* scd/app-openpgp.c (KEY_TYPE_EDDSA, CURVE_ED25519): New.
(struct app_local_s): Add eddsa.
(get_algo_byte, store_fpr): Support KEY_TYPE_EDDSA.
(get_ecc_key_parameters, get_curve_name): Support CURVE_ED25519.
(send_key_attr, get_public_key): Support KEY_TYPE_EDDSA.
(build_ecc_privkey_template): Rename as it supports both of
ECDSA and EdDSA.
(ecc_writekey): Rename. Support CURVE_ED25519, too.
(do_writekey): Follow the change of ecc_writekey.
(do_auth): Support KEY_TYPE_EDDSA.
(parse_ecc_curve): Support CURVE_ED25519. Bug fix for other curves.
(parse_algorithm_attribute): Bug fix for ECDH. Support EdDSA.
* scd/apdu.c (new_reader_slot): Acquire lock.
(open_ct_reader, open_pcsc_reader_direct, open_pcsc_reader_wrapped)
(open_ccid_reader, open_rapdu_reader): Release lock.
(lock_slot, trylock_slot, unlock_slot): Move more to the top.
--
Fixes a test case of:
No libpcsclite1 installed.
Run gpg-agent
Run command "gpg-connect-agent learn /bye" with no card/token
Sometimes it fails: ERR 100663356 Not supported <SCD>
While it should be always: ERR 100663404 Card error <SCD>
(cherry picked from commit 4f557cb9c2ebe274d6aacc60a09cd919055d01ed)
Resolved conflicts:
scd/apdu.c: pth/npth changes. Move lock helpers to the top.
Take care of removed pcsc_no_service.
* scd/pcsc-wrapper.c [__APPLE__]: Fix syntax error.
--
For W32 and probably for Cygwin we don't need the wrapper, thus the
problems does not exhibit itself.
(cherry picked from commit 8ddf604659b93754ffa6dea295678a8adc293f90)
* scd/scdaemon.c (opts): Ignore --disable-keypad.
--
The renaming of --disable-keypad to --disable-pinpad might mess up
configuration files managed with a GUI. The GUI does not not anymore
know about the old option and would allow the user to switch
"disable-pinpad" on. However, a "disable-keypad" might still linger
in the conf file with gpgconf not knowing about it. Thus the conf
file would always be rejected and manual intervention would be
required. Ignoring the old option nicely solves the problem.
(cherry picked from commit e24e92d7e244edd578c0c1f0fba6e0070cb5f104)
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
