* agent/command-ssh.c: Remove dirent.h.
(control_file_s): Add struct item.
(rewind_control_file): New.
(search_control_file): Factor code out to ...
(read_control_file_item): New.
(ssh_handler_request_identities): Change to iterate over entries in
sshcontrol.
--
Formerly we scanned the private key directory for matches of entries
in sshcontrol. This patch changes it to scan the sshcontrol file and
thus considers only keys configured there. The rationale for this is
that it is common to have only a few ssh keys but many private keys.
Even if that assumption does not hold true, the scanning of the
sshcontrol file is faster than reading the directory and only then
scanning the ssh control for each directory entry.
* agent/command-ssh.c (SSH_CONTROL_FILE_NAME): New macro to replace
the direct use of the string.
(struct control_file_s, control_file_t): New.
(open_control_file, close_control_file): New. Use them instead of
using fopen/fclose directly.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
* command-ssh.c (card_key_available): Change wording of no key
diagnostic.
(ssh_handler_request_identities): Do not call card_key_available
if the scdaemon is disabled.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
* command-ssh.c (stream_read_string): Initialize LENGTH to zero.
(start_command_handler_ssh): Use es_fgetc/es_ungetc to check if
EOF has been reached before trying to process another request.
* command-ssh.c (ssh_identity_register): Make KEY_GRIP_RAW be 20
instead of 21 bytes long; do not fill KEY_GRIP_RAW[20] with NUL
byte - KEY_GRIP_RAW is a raw binary string anyway.
char * vs. unsigned char * warnings. The GNU coding standards used to
say that these mismatches are okay and better than a bunch of casts.
Obviously this has changed now.
sm/
* call-dirmngr.c (inq_certificate): Add new inquire SENDCERT_SKI.
* certlist.c (gpgsm_find_cert): Add new arg KEYID and implement
this filter. Changed all callers.
* certchain.c (find_up_search_by_keyid): New helper.
(find_up): Also try using the AKI.keyIdentifier.
(find_up_external): Ditto.
* command-ssh.c (ssh_request_spec): New member: secret_input.
(REQUEST_SPEC_DEFINE): New argument: secret_input.
(request_specs): Add secret_input flag.
(request_spec_lookup): New function ...
(ssh_request_process): ... use it here; depending on secret_input
flag allocate secure or non-secure memory.
* command-ssh.c (sexp_key_extract): Removed FIXME, since
xtrymallos does set errno correctly by now.
(sexp_extract_identifier): Remove const attribute from identifier.
(ssh_handler_request_identities): Remove const attribute from
key_type; removes ugly casts and FIXME.
(sexp_key_extract): Remove const attribute from comment.
(ssh_send_key_public): Remove const attribute from
key_type/comment; removes ugly cast.
(data_sign): Remove const attribute from identifier; removes ugly
cast.
(key_secret_to_public): Remove const attribute from comment;
removes ugly cast.
(ssh_handler_sign_request): Remove const attribute from p.
(sexp_key_extract): Use make_cstring().
(ssh_key_extract_comment): Likewise.
(ssh_key_to_buffer): Use secure memory for memory area to hold the
key S-Expression.
Added more comments.
%0A may pass through.
* agent.h (server_control_s): New field USE_AUTH_CALL.
* call-scd.c (agent_card_pksign): Make use of it.
* command-ssh.c (data_sign): Set the flag.
(ssh_send_key_public): New arg OVERRIDE_COMMENT.
(card_key_available): Add new arg CARDSN.
(ssh_handler_request_identities): Use the card s/n as comment.
(sexp_key_extract): Use GCRYMPI_FMT_STD.
(data_sign): Ditto.
* learncard.c (make_shadow_info): Moved to ..
* protect.c (make_shadow_info): .. here. Return NULL on malloc
failure. Made global.
* agent.h: Add prototype.
* xasprintf.c (xtryasprintf): New.
* app-openpgp.c (get_public_key): Make sure not to return negative
numbers.
(do_sign): Allow passing of indata with algorithm prefix.
(do_auth): Allow OPENPGP.3 as an alternative ID.
* app.c (app_getattr): Return just the S/N but not the timestamp.
* no-libgcrypt.c (gcry_strdup): New.
../g10/call-agent.c
(card_getattr_cb, agent_card_getattr): New.
* command-ssh.c (card_key_available): New.
(ssh_handler_request_identities): First see whether a card key is
available.
* app.c (app_getattr): Return APPTYPE or SERIALNO type even if the
application does dot support the getattr call.
* app.c (select_application): Return an error code and the
application context in an new arg.
* command.c (open_card): Adjusted for that. Don't use the
fallback if no card is present. Return an error if the card has
been removed without a reset.
(do_reset, cmd_serialno): Clear that error flag.
(TEST_CARD_REMOVAL): New. Use it with all command handlers.
(scd_update_reader_status_file): Set the error flag on all changes.
(ssh_identity_register): Partly rewritten.
(open_control_file, search_control_file, add_control_entry): New.
(ssh_handler_request_identities): Return only files listed in our
control file.
* findkey.c (unprotect): Check for allocation error.
* agent.h (opt): Add fields to record the startup terminal
settings.
* gpg-agent.c (main): Record them and do not force keep display
with --enable-ssh-support.
* command-ssh.c (start_command_handler_ssh): Use them here.
* gpg-agent.c: Renamed option --ssh-support to
--enable-ssh-support.
* command.c (cmd_readkey): New.
(register_commands): Register new command "READKEY".
* command-ssh.c (ssh_request_process): Improved logging.
* findkey.c (agent_write_private_key): Always use plain open.
Don't depend on an umask for permissions.
(agent_key_from_file): Factored file reading code out to ..
(read_key_file): .. new function.
(agent_public_key_from_file): New.
* command-ssh.c (ssh_sexp_construct): Rewritten generation of sexp
template, clarified.
(ssh_sexp_extract): Support shadowed-private-key-sexp; treat
protected-private key and shadowed-private-key as public keys.
(key_secret_to_public): Rewritten: simply use ssh_sexp_extract()
and ssh_sexp_construct().
1.9.
* agent.h (agent_exit): Add JNLIB_GCC_A_NR to indicate that this
function won't return.
* gpg-agent.c (check_for_running_agent): Initialize pid to a
default value if not needed.
* command-ssh.c: Removed stdint.h. s/byte_t/unsigned char/,
s/uint32/u32/ becuase that is what we have always used in GnuPG.
(ssh_request_specs): Moved to top of file.
(ssh_key_types): Ditto.
(make_cstring): Ditto.
(data_sign): Don't use a variable for the passphrase prompt, make
it translatable.
(ssh_request_process):
* findkey.c (modify_description): Renamed arguments for clarity,
polished documentation. Make comment a C-string. Fixed case of
DESCRIPTION being just "%".
(agent_key_from_file): Make sure comment string to a C-string.
* gpg-agent.c (create_socket_name): Cleanup the implemntation, use
DIMof, agent_exit, removed superflous args and return the
allocated string as value. Documented. Changed callers.
(create_server_socket): Cleanups similar to above. Changed callers.
(cleanup_do): Renamed to ..
(remove_socket): .. this. Changed caller.
(handle_connections): The signals are to be handled in the select
and not in the accept. Test all FDs after returning from a
select. Remove the event tests from the accept calls. The select
already assured that the accept won't block.
* command-ssh.c (ssh_handler_request_identities)
(ssh_handler_sign_request, ssh_handler_add_identity)
(ssh_handler_remove_identity, ssh_handler_remove_all_identities)
(ssh_handler_lock, ssh_handler_unlock): Changed to return an error
code instead of a boolean.
(ssh_request_process): Changed to return a boolean instead of an
error; adjust caller.
(ssh_request_handle_t): Adjusted type.
(ssh_request_spec): New member: identifier.
(REQUEST_SPEC_DEFINE): New macro; use it for initialization of
request_specs[].
(ssh_request_process): In debugging mode, log identifier of
handler to execute.
(start_command_handler_ssh): Moved most of the stream handling
code ...
(ssh_request_process): ... here.
