--
This is per OpenPGP WG design team decision from 2021-08-13
(raising a new wall after exactly 60 years ;-)
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Fix the condition to report
NO_SECKEY even when the key was not considered by get_session_key.
--
GnuPG-bug-id: 5562
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/keyserver.h: Remove.
* sm/gpgsm.h (struct keyserver_spec): Remove.
(opt): Change keyserver to a strlist_t.
* sm/gpgsm.c (keyserver_list_free): Remove.
(parse_keyserver_line): Remove.
(main): Store keyserver in an strlist.
* sm/call-dirmngr.c (prepare_dirmngr): Adjust for the strlist. Avoid
an ambiguity in dirmngr by adding a prefix if needed.
* g10/options.h (struct keyserver_spec): Move definition from
keyserver.h to here. Remove most fields.
* g10/keyserver.c (free_keyserver_spec): Adjust.
(cmp_keyserver_spec): Adjust.
(parse_keyserver_uri): Simplify.
(keyidlist): Remove fakev3 arg which does not make any sense because
we don't even support v3 keys.
--
We now rely on the dirmngr to parse the keyserver specs. Thus a bad
specification will not be caught immediately. However, even before
that dirmngr had stricter tests.
Signed-off-by: Werner Koch <wk@gnupg.org>
Ported-from: 9f586700ec
* g10/openfile.c (overwrite_filep): Use gnupg_access.
--
As said, this is just an obvious but partial fix. We need to review
things for the output module.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_keyinfo): Factor some code out to ...
(get_keyinfo_on_cards): ... new.
(cmd_havekey): Add --list mode.
* g10/gpg.h (struct server_control_s): Add new caching vars.
* g10/gpg.c (gpg_deinit_default_ctrl): Release cache.
* g10/call-agent.c (agent_probe_any_secret_key): Init and try to use
the keygrip cache.
(agent_genkey): Clear the cache.
(agent_import_key): Ditto.
* g10/keylist.c (list_all, list_one): Pass ctrl to
agent_probe_any_secret_key.
* g10/getkey.c (lookup): Ditto.
--
With this change we first ask the agent for a list of all secret
keygrips and use that list instead of asking the agent for each public
key. Speeds up my "gpg -K" with a lot of secret and public keys by
more than 25%.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (GETPASSWORD_FLAG_SYMDECRYPT): New.
(passphrase_to_dek_ext): Remove this obsolete prototype.
* g10/passphrase.c (passphrase_get): Add arg flags. Use new flag
value.
(passphrase_to_dek): Add arg flags and pass it on.
* g10/mainproc.c (proc_symkey_enc): Use new flag.
* sm/decrypt.c (pwri_decrypt): Use "passphrase".
--
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 03f83bcda5)
Note that we keep on using the term "passphrase" although "password"
would be better. There are however so many occurance of this and
given it is a bike shedding topic we fix that in the PO files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (ssh_handler_request_identities): Remove double
check of ERR.
* g10/getkey.c (get_pubkey_byname): Remove double use of break.
* g10/pkglue.c (pk_encrypt): Handle possible NULL-ptr access due to
failed malloc.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_import_name): Rename to ...
(keyserver_import_mbox): this. And use mail search mode.
* g10/getkey.c (get_pubkey_byname): Change the two callers.
--
In contrast to a search via keyserver_import_ntds the older
keyserver_import_name used a full match of the provided name despite
that it is only called with an addr-spec (mbox). Due to the mode the
pattern send to dirmngr was prefixed with a '=' and thus dirmngr used
an exact search;. This did only work for provided user ids like
"foo@example.org" but not for "<foo@example.org>" or
"Foo <foo@xample.org>". The old code dates back to 2010.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opts): New field expl_import_only.
* g10/import.c (parse_import_options): Set it.
* g10/keyserver.c (keyserver_get_chunk): Add special options for LDAP.
--
I can be assumed that configured LDAP servers are somehow curated and
not affected by rogue key signatures as the HKP servers are. Thus we
don't clean the key anymore so that key certifications are kept even
if the public key has not yet been imported.
See-commit: 6c26e593df
GnuPG-bug-id: 5387
* agent/command.c (cmd_readkey): Add option --no-data and special
handling for $SIGNKEYID and $AUTHKEYID.
* g10/call-agent.c (agent_scd_getattr): Create shadow keys for KEY-FPR
output.
* g10/skclist.c (enum_secret_keys): Automagically get a missing public
key for the current card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_import_fprint_ntds): New.
* g10/getkey.c (get_pubkey_byname): Detect an attempt to search by
fingerprint in no_local mode.
--
See the man page. For testing use
gpg --auto-key-locate local,wkd,keyserver --locate-external-key \
FINGERPRINT
with at least one LDAP keyserver given in dirmngr.conf. On Windows
"ntds" may be used instead or in addtion to "keyserver".
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/kbxserver.c (cmd_search): Use the openpgp hack for calling
classify_user_id.
* kbx/backend-sqlite.c (run_select_statement): Remove angle brackets
in exact addrspec mode.
* g10/call-keyboxd.c (keydb_search): Do not duplicate the left angle
bracket.
* sm/keydb.c (keydb_search): Ditto.
--
Note that the openpgp hack flag of classify_user_id is actually a
misnomer because we actually hack a round a problem in gpgsm. And it
is only over there that we don't set it there. In keyboxd the flag
should be set. And we need to remove the angle brackets of course
because that is how we create the addrspec column values.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Don't use the default log file from common.conf.
* sm/gpgsm.c (main): Ditto.
--
That was acutally not intended and contradicts the description in
doc/example/common.conf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (show_prefs): Show 'AEAD' if flags.aead is set.
--
The terse 'pref' command in the key editor correctly shows '[aead]'
if the uid->flags.aead is set, but the more verbose 'showpref'
command does not, due to an inverted condition check.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* common/comopt.c, common/comopt.h: New.
* common/Makefile.am: Add them.
* g10/gpg.c: Include comopt.h.
(main): Also parse common.conf.
* sm/gpgsm.c: Include comopt.h.
(main): Set a flag for the --no-logfile option. Parse common.conf.
* tools/gpgconf-comp.c (known_options_gpg): Remove "use-keyboxd", add
pseudo option "use_keyboxd".
(known_pseudo_options_gpg): Add pseudo option "use_keyboxd".
(known_options_gpgsm): Remove "use-keyboxd".
* tests/openpgp/defs.scm (create-gpghome): Create common.conf.
* doc/examples/common.conf: New.
--
Note that --use-keybox still works but prints a warning. We will
eventually remove this option becuase it was marked as an experimental
feature anyway.
It would be too confusing if gpg and gpgsm use different key storages.
Further, other components (e.g. dirmngr or gpg-wks-client) which call
gpg or gpgsm need to be aware that the keyboxd is used and pass that
option on the command line. Now that common.conf is always read (even
if --no-options is used) those tools will work instantly.
* g10/getkey.c (get_seckey_default_or_card): Lookup a missing public
key from the current card via LDAP.
* g10/call-dirmngr.c: Include keyserver-intetnal.h.
(gpg_dirmngr_ks_get): Rename arg quick into flags. Take care of the
new LDAP flag.
* g10/keyserver-internal.h (KEYSERVER_IMPORT_FLAG_QUICK): New.
Replace the use of the value 1 for the former quick arg.
(KEYSERVER_IMPORT_FLAG_LDAP): New.
* g10/keyserver.c (keyserver_get_chunk): Increase the reserved line
length.
* dirmngr/ks-action.c (ks_action_get): Add arg ldap_only.
* dirmngr/server.c (cmd_ks_get): Add option --ldap.
--
This change makes it easy to start working with gnupg: Just insert the
smartcard or token provided to you and the first time you sign a
message the public key associated with the current card will be
imported and everything is set without any configuration.
This works only with an LDAP directory because it can be expected that
the public key has been put into the LDAP during card personalization.
Of course an LDAP server needs to be configured; in a Windows AD
domain this can be a mere "keyserver ldap:///" in dirmngr.conf. Other
configured keyservers are ignored.
Requirements for the card driver: The $SIGNKEYID attribute must exists
and a query for the KEY-FPR attribute needs to return the OpenPGP
fingerprint for that key. This is currently supported for OpenPGP
cards and certain PKCS#15 cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/ks-engine-ldap.c (ks_ldap_get): Print a SOURCE status.
* g10/options.h (opts): New field expl_import_self_sigs_only.
* g10/import.c (parse_import_options): Set it.
* g10/keyserver.c (keyserver_get_chunk): Add special options for LDAP.
--
I can be assumed that configured LDAP servers are somehow curated and
not affected by rogue key signatures as the HKP servers are. Thus we
can allow the import of key signature from LDAP keyservers by default.
GnuPG-bug-id: 5387
* tools/gpgconf-comp.c (known_pseudo_options_gpg): Add
"compliance_de_vs".
* g10/gpg.c (gpgconf_list): Returh that pseudo option.
--
Of course this will always return false for this version of gnupg.
But as soon as this version has been approved we have everything ready
for a runtime check.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oForceSignKey,opts): New option "--force-sign-key".
(main): Set it.
* g10/options.h (opt): New flag flags.force_sign_key.
* g10/keyedit.c (sign_uids): Use new flag.
--
GnuPG-bug-id: 4584
* agent/command.c (cmd_keytotpm): New.
(agent/command.c): Register new command KEYTOTPM.
* g10/call-agent.c (agent_keytotpm): New.
* g10/keyedit.c (cmdKEYTOTPM): New command "keytotpm".
(keyedit_menu): Implement.
--
The plumbing is done in two parts: the agent is modified to understand
a KEYTOTPM assuan command taking the key grip as an argument. This
simply obtains the key s expression and calls the existing writeky
diversion to the tpm2daemon. The daemon reponds with the TPM
conversion of the key and that key is then stored in the keyfile as a
shadowed-private-key with "tpm2-v1" type.
To effect the conversion, all the user does from gpg --edit-key is
select which private key they wish to move (or move the primary if no
key is selected) and type keytotpm. The conversion to TPM form is
instantaneous and once converted, the actual key cannot be recovered,
meaning that if you want your gpg key to move to a new laptop you must
keep an unconverted backup copy in a safe location.
When you do a list command, all TPM keys show up as
card-no: TPM-Protected
The key is stored encrypted to the TPM2 storage seed and since each
TPM has a unique seed, only the single TPM contained in your laptop
can now read the key. This means you cannot simply copy the shadowed
key file over to a new laptop, you must copy over the backup copy and
then convert it to TPM form on the new laptop.
To decomission your laptop, execute a tssclear command which
regenerates the storage seed and effectively shreds all keys. Note
when you have done this *every* TPM2 shadowed private key becomes
unreadable by any TPM and all are effectively destroyed.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Very minor cosmetic changes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/exechelp-w32.c (gnupg_spawn_process): Change to use
CreateProcessW.
(gnupg_spawn_process_fd): Ditto.
(gnupg_spawn_process_detached): Ditto.
* g10/exec.c (w32_system): Ditto.
--
GnuPG-bug-id: 4398
We do not use this weirdo CREATE_UNICODE_ENVIRONMENT flag because it
does not make any sense to have non-ASCII names in the environment. I
can't imagine why this should be used at all and rationale for this
API features is, well, sparse.
* common/init.c (_init_common_subsystems) [W32]: Set the codepage to
UTF-8 for input and putput. Switch gettext to UTF-8.
* tools/gpgconf.c (main): Display the input and output codepage if
they differ.
* g10/gpg.c (utf8_strings) [W32]: Make sure this is always set.
--
With this patch the former patch to use ReadConsoleW and WriteConsoleW
in ttyio.c are kind of superfluous because the ANSI version of these
functions are also able to read/write UTF-8 directly given the console
code page has been set correctly. However, this seems to work only
with recent versions of Windows-10.
GnuPG-bug-id: 4365
NIIBE Yutaka