* dirmngr/ldap-parse-uri.c (ldap_parse_uri): Support a new gpgNtds
extension.
* dirmngr/ks-engine-ldap.c (my_ldap_connect): Do ldap_init always with
hostname - which is NULL and thus the same if not given. Fix minor
error in error code handling.
--
Note that "gpgNtds" is per RFC-4512 case insensitive and has not yet
been officially regisetered. Thus for correctness the OID can be
used:
1.3.6.1.4.1.11591.2.5 LDAP URL extensions
1.3.6.1.4.1.11591.2.5.1 gpgNtds=1 (auth. with current user)
Note that the value must be 1; all other values won't enable AD
authentication and are resevered for future use.
This has been cherry-picked from the 2.2 branch,
commit 55f46b33df
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: New option --allow-old-cipher-algos.
(set_compliance_option): Set --rfc4880bis explictly to SHA256 and
AES256. Allow old cipher algos for OpenPGP, rfc4880, and rfc2440.
* g10/options.h (opt): Add flags.allow_old_cipher_algos.
* g10/misc.c (print_sha1_keysig_rejected_note): Always print the note
unless in --quiet mode.
* g10/encrypt.c (setup_symkey): Disallow by default algos with a
blocklengt < 128.
(encrypt_crypt): Ditto. Fallback by default to AES instead of 3DES.
* g10/pkclist.c (algo_available): Take care of old cipher also.
(select_algo_from_prefs): Use AES as implicit algorithm by default.
* tests/openpgp/defs.scm (create-gpghome): Set allow-old-cipher-algos.
--
GnuPG-bug-id: 3415
* tools/symcryptrun.c: Remove.
* tools/Makefile.am: Ditto.
* doc/tools.texi: Remove man page.
* configure.ac: Remove build option and tests used only by this tool.
* Makefile.am (AM_DISTCHECK_CONFIGURE_FLAGS): Do not build
symcryptrun.
--
symcryptrun is too ancient to be of any use and has not been tested in
many years. Thus we should not distribute it anymore.
* g10/gpg.c (oPrintPKARecords): Remove.
(opts): Remove --print-pka-records.
(main): Remove "pka-lookups","pka-trust-increase" and other PKA stuff.
* g10/options.h (EXPORT_DANE_FORMAT): Remove.
(VERIFY_PKA_LOOKUPS, VERIFY_PKA_TRUST_INCREASE): Remove.
(KEYSERVER_HONOR_PKA_RECORD): Remove.
* g10/packet.h (pka_info_t): Remove.
(PKT_signature): Remove flags.pka_tried and pka_info.
* g10/parse-packet.c (register_known_notation): Remove
"pka-address@gnupg.org".
* g10/pkclist.c (check_signatures_trust): Remove PKA stuff.
* g10/call-dirmngr.c (gpg_dirmngr_get_pka): Remove.
* g10/export.c (parse_export_options): Remove "export-pka".
(do_export): Adjust for this.
(write_keyblock_to_output): Ditto.
(do_export_stream): Ditto.
(print_pka_or_dane_records): Rename to ...
(print_dane_records): this and remove two args. Remove PKA printing.
* g10/free-packet.c (free_seckey_enc, cp_pka_info): Adjust for removed
pka_info field.
* g10/getkey.c (get_pubkey_byname): Make AKL_PKA a dummy.
* g10/keyserver.c: Remove "honor-pka-record".
(keyserver_import_pka): Remove.
* g10/mainproc.c (get_pka_address): Remove.
(pka_uri_from_sig): Remove.
(check_sig_and_print): Remove code for PKA.
--
PKA (Public Key Association) was a DNS based key discovery method
which looked up fingerprint by mail addresses in the DNS. This goes
back to the conference where DKIM was suggested to show that we
already had a better method for this available with PGP/MIME. PKA was
was later superseded by an experimental DANE method and is today not
anymore relevant. It is anyway doubtful whether PKA was ever widely
used.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
With these modifications it is now possible to store and retrieve keys
from an AD without manually tweaking the schema. Permissions need to
be set manuallay, though.
--
I accidently added a gpgSubCertID attribute not realizing that the
pgpSubKeyID already carries the long keyid. Remove that. Note that
the pgpkeyID has the short keyid and the long keyid has the name
pgpCertID.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/ks-engine-ldap.c (SERVERINFO_): New constants.
(my_ldap_connect): Relace args pgpkeyattrp and real_ldapp by a new
serverinfo arg. Set the new info flags.
(ks_ldap_get): Adjust for change.
(ks_ldap_search): Ditto.
(ks_ldap_put): Ditto. Replace xmalloc by xtrymalloc. Change the DN
for use with NTDS (aka Active Directory).
* doc/ldap/gnupg-ldap-init.ldif (pgpSoftware): Update definition of
pgpVersion.
* doc/ldap/gnupg-ldap-ad-init.ldif: New.
* doc/ldap/gnupg-ldap-ad-schema.ldif: New.
--
This is a first take on better Active Directory support. The main
change for NTDS in the code is that the an top-RDN of CN is used
instead of the old pgpCertID. More changes to come; for example using
and storing the fingerprint.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpg.texi: Add parameters for batch generation of ECC keys.
--
There are parameters required for batch generation of ECC keys which
weren't mentioned in the documentation.
Signed-off-by: Jens Meißner <meissner@b1-systems.de>
* scd/app.c (is_same_serialno): New.
(check_application_conflict): Use this.
(select_application): Ditto.
(app_switch_current_card): Ditto.
* scd/app-openpgp.c (check_keyidstr): Ignore the card version and also
compare case insensitive.
--
This is required because we change what we emit as serialno of OpenPGP
cards but existing keys still use the old form of the serial
number (i.e. with a firmware version).
See-commit: 3a8250c020
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (pref_hint): Change from union to struct and add field
'exact'. Adjust callers.
* g10/pkclist.c (algo_available): Take care of the exact hint.
* g10/sign.c (sign_file): Rework the hash detection from
recipient prefs.
--
This fixes a encrypt+sign case like: One recipient key has SHA512 as
highest ranked hash preference but the the signing key is a 256 bit
curve. Because we don't want to use a truncated hash with ECDSA, we
need to have an exact match - this is in particular important for
smartcard which check that the hash matches the curves.
Signed-off-by: Werner Koch <wk@gnupg.org>
Ported-from-stable: aeed0b93ff
* scd/command.c (reset_notify): Add option --keep-lock.
(do_reset): Add arg keep_lock.
(cmd_lock): Send progress status.
* g10/call-agent.c (agent_scd_apdu): Add more pseudo APDUs.
* g10/card-util.c (send_apdu): Ditto.
(factory_reset): Use lock commands.
--
This is required so that for example Kleopatra does not detect the
RESET and issues a SERIALNO of its own, thus conflicting with our
SERIALNO undefined.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/examples/vsnfd.prf: Rename to VS-NfD.prf.
* doc/examples/Automatic.prf: New.
* doc/Makefile.am (examples): Adjust.
* build-aux/speedo/w32/inst.nsi: Install gpg-check-pattern.exe and 3
example files.
* build-aux/speedo/w32/wixlib.wxs: Add new files.
--
Note that we renamed the existing example profile so that kleopatra
shows a nicer name. In fact the gpg4win installer just copies of
theses file but it is better to maintain them here.
gpg-check-pattern.exe can no be installed because we meanwhile have a
regex lib which works also on Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (parse_list_options): Add "sort-sigs".
(main): Make it the default.
* g10/options.h (LIST_SORT_SIGS): New.
* g10/keylist.c (cmp_signodes): New.
(list_keyblock_print): Sort signatures and factor signature printing
code out to ...
(list_signature_print): new.
--
In particular together with --full-timestamps this makes it easier to
see the history of key signatures and their revocations. The
self-signatures are also printed first. To disable this
--list-options no-sort-sigs
can be used.
Also don't print the annoying "no recocation reason specified"
message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/examples/vsnfd.prf: Remove enable-extended-key-format
--
This is no longer a valid option for gpg-agent because it
is now the default.
(cherry picked from commit d833030f8c)
* g10/options.h (IMPORT_BULK): New.
* g10/import.c (parse_import_options): Add "bulk-import".
* g10/call-keyboxd.c (in_transaction): New var.
(gpg_keyboxd_deinit_session_data): Run a commit if in bulk import
mode.
(create_new_context): Run a begin transaction if in bulk import mode.
--
Initial tests with this option are not very promising. Importing
about 3000 real world keys with --use-keyboxd and full logging took:
real 33m31.724s
user 19m54.265s
sys 2m49.662s
With bulk-import this saves a mere 12%:
real 29m36.542s
user 19m3.391s
sys 2m46.728s
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/backend-sqlite.c (table_definitions): Add column UINO to
userids.
(be_sqlite_local_s): Add fields select_col_uidno and
select_col_subkey.
(run_select_statement): Also select subkey or uidno column.
(be_sqlite_search): Return their values.
(store_into_userid): Store the UIDNO.
* kbx/backend-support.c (be_return_pubkey): Extend PUBKEY_INFO.
--
For an existing database adding the new column to the table userid is
straightforward. However if the original version of the schema used an
integer for the keyid column, that column has likely be renamed. Make
sure that the NOT NULL constraint has also be removed; check the
SQLite documentation on how this can be done.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (send_keypair_info): Emit the algo string as part
of a KEYPAIRINFO.
* scd/command.c (do_readkey): Ditto.
* scd/app-piv.c (do_readkey): Ditto.
* scd/app-nks.c (do_learn_status_core): Ditto.
(struct fid_cache_s): Add field algostr.
(flush_fid_cache): Release it.
(keygripstr_from_pk_file): Fill it and add it to the cache. Use a
single exit label.
* scd/app-help.c (app_help_get_keygrip_string_pk): Add new arg
r_algostr. Change all callers.
--
This is helpful so that callers do not need to parse the key for this
basic information. Use "scd readkey --info-only" to return the info
status line instead of the key material; using just --info returns the
info in addition to the key material.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/backend-support.c (be_return_pubkey): Add args is_ephemeral and
is_revoked. Adjust callers.
* kbx/backend-sqlite.c: Alter table pubkey to add new columns.
(run_select_statement): Add new column to all selects.
(be_sqlite_search): Return the new flags.
--
For existing test databases the new column can be added with:
alter table pubkey add ephemeral integer not null default 0;
alter table pubkey add revoked integer not null default 0;
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gnupg-module-overview.svg: Add examples of GPGME aware
applications
--
Whenever I used this overview I needed to explain what this
meant so giving examples might help a bit and also illustrate
the codesharing between GpgOL, Kleopatra and KMail.
* scd/app-openpgp.c (data_objects): 0x00FA for binary data.
(do_getattr): Parse the data and send it in status lines.
(get_algorithm_attribute_string): New.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpgtar.c (oUtf8Strings): New.
(opts): Add option --utf8-strings.
(parse_arguments): Set option.
* tools/gpgtar.h (opt): Add field utf8strings.
* tools/gpgtar-create.c (name_to_utf8): New.
(fillup_entry_w32): Use that.
(scan_directory): Ditto.
(scan_directory) [W32]: Convert file name to utf8.
(gpgtar_create): Convert pattern.
--
Note that this works only with file names read from a file or if the
specified files on the command line are plain ascii. When recursing
into a directory Unicode file names work again. This limitation is
due to main(int, char**) which can't get the wchar version. We could
fix that but is needs a bit more work in our init code.
GnuPG-bug-id: 4083
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid. Delay setting of homedir until the new
chuid is done.
* sm/gpgsm.c (main): Delay setting of homedir until the new chuid is
done.
* tools/gpg-card.c (oChUid): New.
(opts): Add --chuid.
(changeuser): New helper var.
(main): Implement --chuid.
* tools/gpg-connect-agent.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (oChUid, opts): New option --chuid.
(main): Implement option.
--
This option will at least be useful for Scute.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/keylist.c (list_cert_colon): Emit a new "fp2" record.
(list_cert_raw): Print the SHA2 fingerprint.
(list_cert_std): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gpgrlhelp.c (read_write_history): New.
(gnupg_rl_initialize): Register new function.
* common/ttyio.c (my_rl_rw_history): New var.
(tty_private_set_rl_hooks): Add arg read_write_history.
(tty_read_history): New.
(tty_write_history): New.
* tools/gpg-card.c (HISTORYNAME): New.
(oNoHistory): New enum value.
(opts): New option --no-history.
(cmd_history): New.
(cmds): New command "history".
(interactive_loop): Read and save the history.
* tools/gpg-connect-agent.c (HISTORYNAME): New.
(opts): New option --no-history.
(main): Read and save the history. New command /history.
--
Yeah, finally we have stored history; I should have added this much
earlier.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (write_trust_status): Add arg mbox.
(check_signatures_trust): Appenmd mbox to the status lines.
--
GnuPG-bug-id: 4735
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (check_sig_and_print): Add failsafe check for PK.
Pass KEYBLOCK down do check_signatures_trust. Protect existsing error
ocde in case the signature expired.
* g10/pkclist.c (is_in_sender_list): New.
(check_signatures_trust): Add args keyblock and pk. Add new uid based
checking code.
* g10/test-stubs.c, g10/gpgv.c: Adjust stubs.
--
GnuPG-bug-id: 4735
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.c: Include tlv.h.
(cmd_writecert): Add option --openpgp.
(cmd_readcert): Ditto.
--
We use the CERT object for this and encapsulate the key block in a CMS
object.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/fingerprint.c (gpgsm_get_key_algo_info): Factor code out to ...
(gpgsm_get_key_algo_info2): new.
(gpgsm_pubkey_algo_string): New.
* sm/keylist.c (list_cert_colon): Put curve into field 17
(list_cert_raw): Print the unified key algotithm string instead of the
algo and size.
(list_cert_std): Ditto.
--
It is important to known whether a 256 bit ECC uses a NIST or a
Brainpool curve.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certchain.c (find_up): Disable external lookups in offline mode.
Always allow AKI lookup if CRLs are also enabled.
--
GnuPG-bug-id: 4898
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (get_manufacturer): New..
(do_getattr): Add new attribute "MANUFACTURER".
(do_learn_status): Always print it.
--
This will make it easy to maintain the list of OpenPGP vendors at just
one place.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certchain.c (is_cert_still_valid): Shortcut if tehre is no DP.
* common/audit.c (proc_type_verify): Print "n/a" if a cert has no
distribution point.
* sm/gpgsm.h (opt): Add field enable_issuer_based_crl_check.
* sm/gpgsm.c (oEnableIssuerBasedCRLCheck): New.
(opts): Add option --enable-issuer-based-crl-check.
(main): Set option.
--
If the issuer does not provide a DP and the user wants such an issuer,
we expect that a certificate does not need revocation checks. The new
option --enable-issuer-based-crl-check can be used to revert to the
old behaviour which requires that a suitable LDAP server has been
configured to lookup a CRL by issuer.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (tdb_register_trusted_key): accept fingerprint as well
as long key ID.
* doc/gpg.texi: document that --trusted-key can accept a fingerprint.
--
GnuPG-bug-id: 4855
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Fixed uses or return and kept the old string to avoid breaking
translations.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): New options --auto-key-import,
--no-auto-key-import, and --no-include-key-block.
(gpgconf_list): Add them.
* g10/options.h (opt): Add field flags.auto_key_import.
* g10/mainproc.c (check_sig_and_print): Use flag to enable that
feature.
* tools/gpgconf-comp.c: Give the new options a Basic config level.
--
Note that the --no variants of the options are intended for easy
disabling at the command line.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgpdefs.h (SIGSUBPKT_KEY_BLOCK): New.
* g10/gpg.c (oIncludeKeyBlock): New.
(opts): New option --include-key-block.
(main): Implement.
* g10/options.h (opt): New flag include_key_block.
* g10/parse-packet.c (dump_sig_subpkt): Support SIGSUBPKT_KEY_BLOCK.
(parse_one_sig_subpkt): Ditto.
(can_handle_critical): Ditto.
* g10/sign.c (mk_sig_subpkt_key_block): New.
(write_signature_packets): Call it for data signatures.
--
This patch adds support for a to be proposed OpenPGP ferature:
Introduce the Key Block subpacket to align OpenPGP with CMS.
This new subpacket may be used similar to the CertificateSet of
CMS (RFC-5652) and thus allows to start encrypted communication
after having received a signed message. In practice a stripped down
version of the key should be including having only the key material
and the self-signatures which are really useful and shall be used by
the recipient to reply encrypted.
#### Key Block
(1 octet with value 0, N octets of key data)
This subpacket MAY be used to convey key data along with a signature
of class 0x00, 0x01, or 0x02. It MUST contain the key used to create
the signature; either as the primary key or as a subkey. The key
SHOULD contain a primary or subkey capable of encryption and the
entire key must be a valid OpenPGP key including at least one User ID
packet and the corresponding self-signatures.
Implementations MUST ignore this subpacket if the first octet does not
have a value of zero or if the key data does not represent a valid
transferable public key.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/export.c (push_export_filters): New.
(pop_export_filters): New.
(export_pubkey_buffer): Add args prefix and prefixlen. Adjust
callers.
* g10/import.c (impex_filter_getval): Add property "fpr".
* g10/main.h (struct impex_filter_parm_s): Add field hexfpr.
--
The push and pop feature will help us to use the export filter
internally in gpg. Same for the export_pubkey_buffer change.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* scd/app-openpgp.c (send_keypair_info): Reaturn the key creation time
as part of a KEYPAIRINFO.
(do_readkey): Do not return the KEY-TIME anymore.
--
Sending the KEY_TIME status as part of a READKEY command was only
recently added. It is better to merge that into the KEYPAIRINFO line.
Another patch with chnage this for the consumers of that info.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/watchgnupg.c: Include sys/wait.h.
(GNUPG_DEF_COPYRIGHT_LINE): Add a default value for standalone
building.
(get_logname): New.
(main): Use a default socket name and add option --homedir.
--
This is quite convenient and saves a lot of typing or shell alias
definitions.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (UBID_LEN): New. Use it at all places.
* kbx/keybox-blob.c (create_blob_finish): Do not write the UBID item.
* kbx/keybox-dump.c (print_ubib): Remove.
(_keybox_dump_blob): Do not print the now removed ubid flag.
* kbx/keybox-search-desc.h (struct keydb_search_desc): Use constants
for the size of the ubid and grip.
* kbx/keybox-search.c (blob_cmp_ubid): New.
(has_ubid): Make it a simple wrapper around blob_cmp_ubid.
(keybox_get_data): Add arg 'r_ubid'.
* kbx/frontend.h (enum kbxd_store_modes): New.
* kbx/kbxserver.c (cmd_store): Add new option --insert.
* kbx/backend-cache.c (be_cache_initialize): New.
(be_cache_add_resource): Call it here.
* kbx/backend-kbx.c (be_kbx_seek): Remove args 'fpr' and 'fprlen'.
(be_kbx_search): Get the UBID from keybox_get_data.
* kbx/backend-support.c (be_fingerprint_from_blob): Replace by ...
(be_ubid_from_blob): new. Change all callers.
* kbx/frontend.c (kbxd_add_resource): Temporary disable the cache but
use the new cache init function.
(kbxd_store): Replace arg 'only_update' by 'mode'. Seek using the
ubid. Take care of the mode.
--
It turned out that using the hash of the entire blob was not helpful.
Thus we redefine the Unique-Blob-ID (UBID) as the primary fingerprint
of the blob. In case this is a v5 OpenPGP key a left truncated
version of the SHA-256 hash is used; in all other cases the full SHA-1
hash. Using a SHA-256 hash does not make sense because v4 keys are
and will for some time be the majority of keys and thus padding them
with zeroes won't make any difference. Even if fingerprint collisions
can eventually be created we will assume that the keys are bogus and
that it does not make sense to store its twin also in our key storage.
We can also easily extend the update code to detect a collision and
reject the update.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/DETAILS: Specify new status code "NOTE".
* dirmngr/ks-engine-http.c (ks_http_fetch): Print a NOTE status for a
bad TLS certificate.
* g10/call-dirmngr.c (ks_status_cb): Detect this status.
--
For example a
gpg -v --locate-external-keys dd9jn@posteo.net
now yields
gpg: Note: server uses an invalid certificate
gpg: (further info: bad cert for 'posteo.net': \
Hostname does not match the certificate)
gpg: error retrieving 'dd9jn@posteo.net' via WKD: Wrong name
gpg: error reading key: Wrong name
(without -v the "further info" line is not shown). Note that even
after years Posteo is not able to provide a valid certificate for
their .net addresses. Anyway, this help to show the feature.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.h (struct keyserver_spec): Add field use_ldaps.
* sm/gpgsm.c (parse_keyserver_line): Parse flags.
* sm/call-dirmngr.c (prepare_dirmngr): Send ldaps flag to the dirmngr.
* dirmngr/dirmngr.h (struct ldap_server_s): Add field use_ldaps.
* dirmngr/ldapserver.c (ldapserver_parse_one): Parse flags.
* dirmngr/ldap.c (start_cert_fetch_ldap): Call wrapper with --tls.
* dirmngr/dirmngr_ldap.c: New option --tls.
(fetch_ldap): Make use of that option.
--
There was no way to specify an LDAPS server in
dirmngr_ldapserver.socnf or with gpgsm's --keyserver option. This
patch fixes this. Eventually we should allow to replace host and port
by a partial URI in the same way ldap_initialize does it. For backward
compatibility we do not yet do that.
Although the dirmngr code accepts an URL (eg. taken from a
certificate), I can't see how the scheme was ever used. Thus the
patch also detects an ldaps scheme and uses this. That part has not
been tested, though.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_one_real): Don't do the final clean in the
merge case.
--
This fixes a regression introduced with self-sigs-only.
GnuPG-bug-id: 4628
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Resolved Conflicts:
* common/asshelp.c: Keep the new code in master for spawing under
Windows.
* g10/Makefile.am: Keep all new file.
* g10/photoid.c: Pass CTRL to pct_expando.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/Makefile.am (EXTRA_DIST, BUILT_SOURCES): Add
gnupg-module-overview.eps, gnupg-card-architecture.eps
(DISTCLEANFILES): Remove them.
--
The files needs to be added so that it is properly
included in the dist tarball. As the rule
for it was moved into maintainer mode by 58bab1a.
* g10/keygen.c (parse_key_parameter_part): Add arg R_KEYGRIP and
support the special algo "card".
(parse_key_parameter_string): Add args R_KEYGRIP and R_SUBKEYGRIP.
Handle the "card" algo. Adjust callers.
(parse_algo_usage_expire): Add arg R_KEYGRIP.
(quickgen_set_para): Add arg KEYGRIP and put it into the parameter
list.
(quick_generate_keypair): Handle algo "card".
(generate_keypair): Also handle the keygrips as returned by
parse_key_parameter_string.
(ask_algo): Support ed25519 from a card.
--
Note that this allows to create a new OpenPGP key from an initialized
OpenPGP card or from any other supported cards. It has been tested
with the TCOS Netkey card. Right now a stub file for the cards might
be needed; this can be achieved by running "gpgsm --learn" with the
card plugged in.
Example:
gpg --quick-gen-key foo@example.org card
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (ask_algo): Identify the standard keys.
--
The asterisks mark the usages of a key as retruned by scd via the
$AUTHKEYID et al. attributes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Add option.
(main): Set flag.
* g10/options.h: Add flags.use_only_openpgp_card.
* g10/call-agent.c (start_agent): Implement option.
--
With the previous patch we switch to autoselect an application
instead of requesting an openpgp card. This option allows to revert
this in case of use use cases which expected the former behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit c185f6dfbd)
This was first added to the 2.2 branch.
* doc/gpg-agent.texi: improve documentation of CARD entry in
GETEVENTCOUNTER description.
--
"stati" is unclear and confusing, and describing something in the
singular is almost always less ambiguous than leaving it in the
plural.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* configure.ac: New option --keyboxd-pgm.
(KEYBOXD_NAME, KEYBOXD_DISP_NAME): New ac_defines.
* common/util.h: Add substitutes for new error codes.
(GNUPG_MODULE_NAME_KEYBOXD): New.
* common/homedir.c (gnupg_module_name): Support
GNUPG_MODULE_NAME_KEYBOXD.
* common/asshelp.c (SECS_TO_WAIT_FOR_KEYBOXD): New.
(wait_for_sock): Support keyboxd.
(start_new_service): Ditto.
(start_new_keyboxd): New.
* tools/gpg-connect-agent.c: New options --keyboxd and
--keyboxd-program.
(start_agent): Implement new option.
--
This change allows us to test the new keyboxd using our standard
helper. It also provides the necessary code to start keyboxd on the
fly.
Signed-off-by: Werner Koch <wk@gnupg.org>
Werner Koch