* g10/gpg.c (main): remove KEYSERVER_AUTO_KEY_RETRIEVE from the
default keyserver options.
* doc/gpg.texi: document this change.
--
This is a partial reversion of
7e1fe791d1. Werner and i discussed it
earlier today, and came to the conclusion that:
* the risk of metadata leakage represented by a default
--auto-key-retrieve, both in e-mail (as a "web bug") and in other
contexts where GnuPG is used to verified signatures, is quite high.
* the advantages of --auto-key-retrieve (in terms of signature
verification) can sometimes be achieved in other ways, such as when
a signed message includes a copy of its own key.
* when those other ways are not useful, a graphical, user-facing
application can still offer the user the opportunity to choose to
fetch the key; or it can apply its own policy about when to set
--auto-key-retrieve, without needing to affect the defaults.
Note that --auto-key-retrieve is specifically about signature
verification. Decisions about how and whether to look up a key during
message encryption are governed by --auto-key-locate. This change
does not touch the --auto-key-locate default of "local,wkd". The user
deliberately asking gpg to encrypt to an e-mail address is a different
scenario than having an incoming e-mail trigger a potentially unique
network request.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* doc/gpg.texi: Document new option.
* g10/call-dirmngr.c (create_context): Fail if option is given.
* g10/gpg.c (cmd_and_opt_values): New value.
(opts): New option.
(gpgconf_list): Add new option.
(main): Handle new option.
* g10/options.h (struct opt): New field 'disable_dirmngr'.
* tools/gpgconf-comp.c (gc_options_gpg): New option.
GnuPG-bug-id: 3334
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (main): Add KEYSERVER_AUTO_KEY_RETRIEVE to the default
keyserver options. Set the default for --auto-key-locate to
"local,wkd". Reset that default iff --auto-key-locate has been given
in the option file or in the commandline.
* g10/getkey.c (parse_auto_key_locate): Work on a copy of the arg.
--
GnuPG-bug-id: 3324
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_DRY_RUN): New.
* g10/import.c (parse_import_options): Add "show-only".
(import_one): use that as alternative to opt.dry_run.
--
This is just a convenience thing for
--import-options import-show --dry-run
Signed-off-by: Werner Koch <wk@gnupg.org>
--
dev.gnupg org is the development platform but the canonical bug
address is and has always been bugs.gnupg.org. We should keep on
using this address for the case that we switch the tracker again or
split it off the development system.
That is also the reason why we should keep on communicating a plain
bug number without the 'T' prefix.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpg.texi: Document the new import option.
* g10/gpg.c (main): Make the new option default to yes.
* g10/import.c (parse_import_options): Parse the new option.
(import_one): Act on the new option.
* g10/options.h (IMPORT_REPAIR_KEYS): New macro.
GnuPG-bug-id: 2236
Signed-off-by: Justus Winter <justus@g10code.com>
Replace mentions of bugs.gnupg.org with https://dev.gnupg.org/. Since
the project has transitioned to a better workflow for supporting
contributions, we should ensure that our documentation points to the
right place.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* build-aux/speed/w32/inst.nsi: stop installing skeleton files.
* doc/gpg.texi: stop documenting skeleton files.
* g10/Makefile.am: stop installing skeleton files.
* g10/openfile.c (copy_options_file): Remove.
(try_make_homedir): do not call copy_options_file.
--
The defaults for gpg and dirmngr are good. Both programs should work
fine for the simple case without any config file. The skeleton config
files were being copied at first use (when the defaults are fine).
But when the user needs to fiddle with them (after they've become
sophisticated users), they're likely out of date because gpg has been
upgraded since then. So they're used for documentation, but they're
stale documentation, which is probably worse than a clean empty file.
GnuPG-bug-id: 3086
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/gpg.c (aQuickSetPrimaryUid): New const.
(opts): New command --quick-set-primary-uid.
(main): Implement it.
* g10/keyedit.c (keyedit_quick_adduid): Factor some code out to ...
(quick_find_keyblock): new func.
(keyedit_quick_revuid): Use quick_find_keyblock.
(keyedit_quick_set_primary): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/export.c (export_seckeys): Add arg OPTIONS and pass it to
do_export.
(export_secsubkeys): Ditto.
* g10/gpg.c (main): Pass opt.export_options to export_seckeys and
export_secsubkeys
--
Back in the old days we did not used the export options for secret
keys export because of a lot of duplicated code and that the old
secring.gpg was anyway smaller that the pubring.gpg. With 2.1 it was
pretty easy to enable it.
Reported-by: Peter Lebbing
GnuPG-bug-id: 2973
* doc/gpg.texi: Clarify usage and expiration arguments for key
generation.
* tests/openpgp/quick-key-manipulation.scm: Test all variants.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/export.c (parse_export_options): Add "backup" and its alias
"export-backup".
(do_export_one_keyblock): Export ring trust packets in backup mode.
* g10/import.c (parse_import_options): Add "restore" and its alias
"import-restore".
(read_block): Import ring trust packets.
--
These options are intended to, well, backup and restore keys between
GnuPG implementations. These options may eventually be enhanced to
backup and restore all public key related information.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): If the parameter for --faked-system-time
ends with a '!', freeze time at the specified point.
* common/gettime.c (gnupg_set_time): Allow to freeze the time
at an arbitrary time instead of only the current time.
* doc/gpg.texi: Update documentation for --faked-system-time.
--
This patch allows the user to modify the behavior of the
--faked-system-time option: by appending a '!' to the parameter,
time in GnuPG will be frozen at the specified time, instead of
advancing normally from that time onward.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* doc/gpg.texi: Remove comment about options being parsed in-order.
They aren't.
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Fixes-commit: 7572d27
* doc/gpg.texi: Improve the subsection on unattended key generation by
suggesting the quick key manipulation interface as an alternative, and
by suggesting alternatives to '%pubring' and '%secring'. Simplify
examples accordingly.
GnuPG-bug-id: 2400
Signed-off-by: Justus Winter <justus@g10code.com>
* doc/gpg.texi: New subsections on programmatic use of GnuPG,
ephemeral home directories, and the quick key manipulation interface.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Rename options.
(main): Update errors.
* doc/gpg.texi: Update accordingly.
--
I decided not to keep the old versions as aliases in the documentation
because the interface is a fairly recent addition.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Rename option.
* g10/call-agent.c (agent_scd_learn): Update comment.
* doc/gpg.texi: Update accordingly.
--
This change has a surprising side effect. Previously, --edit was an
alias for --edit-key, because the argument parser actually accepts
unique prefixes of all options. With this change, however, --edit is
ambiguous.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Rename option.
* doc/gpg.texi: Update accordingly.
--
This is a rather long name, but I believe that this command is rarely
used, and in places where it is used frequently, the process is likely
automated.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* doc/gpg.texi: Add the old version of every option that was updated
with the last change set.
* doc/gpgsm.texi: Likewise.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* doc/gpg.texi: Document that fact.
* g10/keygen.c (quick_generate_keypair): Use a default value.
* tests/openpgp/quick-key-manipulation.scm: Test that fact.
GnuPG-bug-id: 2701
Signed-off-by: Justus Winter <justus@g10code.com>
