* g10/options.h: Add weak_digests linked list to opts.
* g10/main.h: Declare weakhash linked list struct and
additional_weak_digest() function to insert newly-declared weak
digests into opts.
* g10/misc.c: (additional_weak_digest): New function.
(print_digest_algo_note): Check for deprecated digests.
* g10/sig-check.c: (do_check): Reject all weak digests.
* g10/gpg.c: Add --weak-digest option to gpg.
* doc/gpg.texi: Document gpg --weak-digest option.
* g10/gpgv.c: Add --weak-digest option to gpgv.
* doc/gpgv.texi: Document gpgv --weak-digest option.
--
gpg and gpgv treat signatures made over MD5 as unreliable, unless the
user supplies --allow-weak-digests to gpg. Signatures over any other
digest are considered acceptable.
Despite SHA-1 being a mandatory-to-implement digest algorithm in RFC
4880, the collision-resistance of SHA-1 is weaker than anyone would
like it to be.
Some operators of high-value targets that depend on OpenPGP signatures
may wish to require their signers to use a stronger digest algorithm
than SHA1, even if the OpenPGP ecosystem at large cannot deprecate
SHA1 entirely today.
This changeset adds a new "--weak-digest DIGEST" option for both gpg
and gpgv, which makes it straightforward for anyone to treat any
signature or certification made over the specified digest as
unreliable.
This option can be supplied multiple times if the operator wishes to
deprecate multiple digest algorithms, and will be ignored completely
if the operator supplies --allow-weak-digests (as before).
MD5 is always considered weak, regardless of any further
--weak-digest options supplied.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
(this is a rough cherry-pick of applying the following commits to
STABLE-BRANCH-1-4:
76afaed65eb98939812a91015d021b
)
* g10/main.h (DEFAULT_CIPHER_ALGO): Change to AES or CAST5 or 3DES
depending on configure options.
* g10/gpg.c (main): Set opt.s2k_cipher_algo to DEFAULT_CIPHER_ALGO.
--
(cherry picked from commit 57df1121c1)
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/passphrase.c (stdenvnames): Add DBUS_SESSION_BUS_ADDRESS.
--
pinentry-gnome3 talks to the gcr prompter via dbus. Without this
environment variable, it can't find the correct session to talk to.
* g10/trustdb.c (validate_keys): Call dump_key_array only in debug
mode.
--
I guess that is a left-over from an early attempt to output
information on the trustdb for use by other tools. Maybe related to
the former --list-trust-path command. Sending it to stdout is
probably useful so we do this now only in debug mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported to STABLE-BRANCH-1-4 from
b03a264729 by dkg
* cipher/rsa.c (rsa_sign): Verify after sign.
* g10/gpg.c (opts): Make --no-sig-create-check a NOP.
* g10/options.h (opt): Remove field "no_sig_create_check".
* g10/sign.c (do_sign): Do check only for DSA.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_seckey): Return G10ERR_NO_PUBKEY when it's not
exact match.
--
In the situation of corrupted .gnupg/ where only private subkey is
available but no corresponding public key of the subkey, the code
returned public primary key which caused mysterious error (for a
user). This fix detects an error earlier.
GnuPG-bug-id: 1422
Debian-Bug-Id: #638619
* g10/free-packet.c (cmp_public_keys, cmp_secret_keys): Compare opaque
data at the first entry of the array when it's unknown algo.
* mpi/mpi-cmp.c (mpi_cmp): Backport libgcrypt 1.5.0's semantics.
--
(backported from 2.0 commit 43429c7869)
GnuPG-bug-id: 1962
* g10/parse-packet.c (parse_key): Check PKTLEN before calling mpi_read
et al.
--
Due to the missing length checks PKTLEN may turn negative. Because
PKTLEN is an unsigned int the malloc in read_rest would try to malloc
a too large number and terminate the process with "error reading rest
of packet: Cannot allocate memory".
Reported-by: Hanno Böck.
Signed-off-by: Werner Koch <wk@gnupg.org>
(backported from 2.0 commit 0aac920f23)
* util/pka.c: Rewrite.
(get_pka_info): Add arg fprbuflen. Change callers to pass this.
* util/strgutil.c (ascii_strlwr): New.
* configure.ac: Remove option --disable-dns-pka.
(USE_DNS_PKA): Remove ac_define.
* g10/getkey.c (parse_auto_key_locate): Always include PKA.
--
Note that although PKA is now always build, it will only work if
support for looking up via DNS has not been disabled.
The new PKA only works with the IPGP DNS certtype and shall be used
only to retrieve the fingerprint and optional the key for the first
time. Due to the security problems with DNSSEC the former assumption
to validate the key using DNSSEC is not anymore justified. Instead an
additional layer (e.g. Trust-On-First-Use) needs to be implemented to
track change to the key. Having a solid way of getting a key matching
a mail address is however a must have.
More work needs to go into a redefinition of the --verify-options
pka-lookups and pka-trust-increase. The auto-key-locate mechanism
should also be able to continue key fetching with another method once
the fingerprint has been retrieved with PKA.
Signed-off-by: Werner Koch <wk@gnupg.org>
This is a backport from master.
(backported from commit 2fc27c8696)
* include/mpi.h, mpi/mpiutils.c (mpi_set_cond): New.
* mpi/mpi-pow.c (SIZE_PRECOMP): Rename from SIZE_B_2I3.
(mpi_powm): Access all data in the table and use mpi_set_cond.
--
Access to the precomputed table was indexed by a portion of EXPO,
which could be mounted by a side channel attack. This change fixes
this particular data-dependent access pattern.
* g10/seckey-cert.c (do_check): Call BUG for NULL return of
get_opaque.
--
This is the suggested addition from commit 6f03218. We better run
into an fatal error than into a segv.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/build-packet.c (do_secret_key): Check for NULL return from
gcry_mpi_get_opaque.
* g10/keyid.c (hash_public_key): Ditto.
--
This is a backport of 76c8122adf from
master to the STABLE-BRANCH-1-4
On the STABLE-BRANCH-1-4, we may also want to patch g10/seckey-cert.c,
but that has not been done in this patch.
This fix extends commmit 0835d2f44e.
gpg2 --export --no-default-keyring --keyring TESTDATA
With TESTDATA being below after unpacking.
-----BEGIN PGP ARMORED FILE-----
mBMEhdkMmS8BcX8F//8F5voEhQAQmBMEnAAAZwAAo4D/f/8EhQAAAIAEnP8EhQAQ
iBMEnP8AAAAABf8jIID///8EhQYQmBMEnIUAEIgTBKT/AAAAAAUAACCA/f//BIUA
EJgTBJx/AP8ABPPzBJx/AP8ABPPz
=2yE0
-----END PGP ARMORED FILE-----
Reported-by: Jodie Cunningham
[dkg: rebased to STABLE-BRANCH-1-4]
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* keyserver/curl-shim.c (curl_easy_setopt) : ensure that va_end is
called.
--
stdarg(3) says:
Each invocation of va_start() must be matched by a
corresponding invocation of va_end() in the same function.
Observed by Joshua Rogers <honey@internot.info>
Debian-Bug-Id: #773475
[dkg: rebased to STABLE-BRANCH-1-4]
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/armor.c (parse_key_failed_line): New.
(check_input): Watch out for gpgkeys_ error lines.
* g10/filter.h (armor_filter_context_t): Add field key_failed_code.
* g10/import.c (import): Add arg r_gpgkeys_err.
(import_keys_internal): Ditto.
(import_keys_stream): Ditto.
* g10/keyserver.c (keyserver_errstr): New.
(keyserver_spawn): Detect "KEY " lines while sending. Get gpgkeys_err
while receiving keys.
(keyserver_work): Add kludge for better error messages.
--
GnuPG-bug-id: 1832
Note that these changes can be backported to 1.4 but they don't make
sense for 2.1 due to the removal of the keyserver helpers. The error
reporting could be improved even more but given that this is an old
GnuPG branch it is not justified to put too much effort into it.
Signed-off-by: Werner Koch <wk@gnupg.org>
[dkg: rebased to STABLE-BRANCH-1-4]
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* include/host2net.h (buf16_to_ulong, buf16_to_uint): New.
(buf16_to_ushort, buf16_to_u16): New.
(buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New.
--
This fixes sign extension on shift problems. Hanno Böck found a case
with an invalid read due to this problem. To fix that almost all uses
of "<< 24" and "<< 8" are changed by this patch to use an inline
function from host2net.h.
(back ported from commit 2183683bd6)
Signed-off-by: Werner Koch <wk@gnupg.org>
[dkg: rebased to STABLE-BRANCH-1-4]
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/keyring.c (keyring_get_keyblock): Whitelist allowed packet
types.
--
The keyring DB code did not reject packets which don't belong into a
keyring. If for example the keyblock contains a literal data packet
it is expected that the processing code stops at the data packet and
reads from the input stream which is referenced from the data packets.
Obviously the keyring processing code does not and cannot do that.
However, when exporting this messes up the IOBUF and leads to an
invalid read of sizeof (int).
We now skip all packets which are not allowed in a keyring.
Reported-by: Hanno Böck <hanno@hboeck.de>
(back ported from commit f0f71a721c)
[dkg: rebased to STABLE-BRANCH-1-4]
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/build-packet.c (write_fake_data): Take care of a NULL stored as
opaque MPI.
--
Reported-by: Hanno Böck <hanno@hboeck.de>
(back ported from commit 0835d2f44e)
[dkg: rebased to STABLE-BRANCH-1-4]
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/parse-packet.c (parse_trust): Always allocate a packet.
--
Reported-by: Hanno Böck <hanno@hboeck.de>
Signed-off-by: Werner Koch <wk@gnupg.org>
(back ported from commit 3997848786)
[dkg: rebased to STABLE-BRANCH-1-4]
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/parse-packet.c (MAX_KEY_PACKET_LENGTH): New.
(MAX_UID_PACKET_LENGTH): New.
(MAX_COMMENT_PACKET_LENGTH): New.
(MAX_ATTR_PACKET_LENGTH): New.
(parse_key): Limit the size of a key packet to 256k.
(parse_user_id): Use macro for the packet size limit.
(parse_attribute): Ditto.
(parse_comment): Ditto.
--
Without that it is possible to force gpg to allocate large amounts of
memory by using a bad encoded MPI. This would be an too easy DoS.
Another way to mitigate would be to change the MPI read function to
allocate memory dynamically while reading the MPI. However, that
complicates and possibly slows down the code. A too large key packet
is in any case a sign for broken data and thus gpg should not use it.
Reported-by: Hanno Böck
GnuPG-bug-id: 1823
Signed-off-by: Werner Koch <wk@gnupg.org>
(back ported from commit 382ba4b137)
[dkg: rebased to STABLE-BRANCH-1-4]
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
