* sm/call-dirmngr.c (gpgsm_dirmngr_isvalid): Do not use
option --force-default-responder.
* sm/certchain.c (is_cert_still_valid): Rename arg for clarity.
(gpgsm_validate_chain): Always switch to chain model.
--
The trustlist.txt may indicate that a root CA issues certificates
which shall be validated using the chain model. This is for example
the case for qualified signatures. Before this change we did this
only if the default shell model indicated that a certificate has
expired. This optimization is technically okay but has one problem:
The chain model requires the use of OCSP but we switch to this only
when running the chain model validation. To catch revoked
certificates using OCSP we need to always switch to the chain model
unless OCSP has been enabled anyway.
Note that the old --force-default-responder option is not anymore
used.
Test cases are certificates issued by
# CN=TeleSec qualified Root CA 1
# O=Deutsche Telekom AG
# C=DE
# 2.5.4.97=USt-IdNr. DE 123475223
90:C6:13:6C:7D:EF:EF:E9:7C:C7:64:F9:D2:67:8E:AD:03:E5:52:96 \
S cm qual relax
A sample revoked certificate is
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
* agent/command.c (cmd_export_key): Add option --mode1003.
(command_has_option): Ditto.
* g10/build-packet.c (do_key): Implement mode 1003.
* g10/parse-packet.c (parse_key): Ditto.
* g10/options.h (EXPORT_MODE1003): New.o
* g10/call-agent.c (agent_export_key): Add arg mode1003.
* g10/export.c (parse_export_options): Add "mode1003"
(secret_key_to_mode1003): New.
(receive_seckey_from_agent): Add arg mode1003.
(do_export_one_keyblock): Pass option down.
--
This option allows to export a secret key in GnuPG's native format.
Thus no re-encryption is required and further the public key parameters
are also authenticated if a protection passphrase has been used.
Note that --import is not yet able to handle this new mode. Although
old version of GnuPG will bail out with "invalid packet" if a mode1003
exported secret key is seen.
* tools/gpg-wks.h (opt): Add add_revocs.
* tools/wks-util.c (wks_get_key): Add arg 'binary'.
(wks_armor_key): New.
(wks_find_add_revocs): New.
(wks_cmd_install_key): Get key in binary mode and add revocations if
enabled.
* tools/gpg-wks-client.c (oAddRevocs): New.
(opts): Add --add-revocs.
(parse_arguments): Set option,
(command_send): Get key in binary mode, add revocations if enabled,
and explictly armor key. Remove kludge to skip the Content-type line
in no_encrypt mode.
(mirror_one_keys_userid): Always filter the key to get rid of the
armor as received from dirmngr. Add revocations from the local
keyring.
--
Note that this also fixes an oddity of the new mirror command which
used to store the keys armored as received from dirmngr.
* g10/gpg.c (oListFilter): New.
(opts): Add --list-filter.
(main): Parse oListFilter.
* g10/keylist.c: Include init.h and recsel.h.
(struct list_filter_s, list_filter): New.
(release_list_filter): New.
(cleanup_keylist_globals): New.
(parse_and_set_list_filter): New.
(list_keyblock): Implement --list-filter type "select".
* g10/import.c (impex_filter_getval): Add scope support and new
property names "key-size", "algostr", "origin", "lastupd", and "url".
--
This option is pretty useful to select keys based on their properties.
The scope thing can be sued to limit a selection to just the primary
key or to subkeys. For example:
gpg -k --list-filter 'select=revoked-f && sub/algostr=ed25519'
Lists all non-revoked keys with an ed25519 (signing)-subkey.
* g10/gpg.c (aQuickUpdatePref): New.
(opts): Add --quick-update-pref.
(main): Implement.
* g10/keyedit.c (keyedit_quick_update_pref): New.
(menu_set_preferences): Add arg 'unattended' and adjust caller.
--
This new quick command is in particular useful to update existing keys
so that they can be used with OCB mode.
* g10/gpg.c (opts): New option--force-ocb as alias for force-aead.
Turn --aead-algo and --personal-aead-preferences into dummy options.
(build_list_md_test_algo, build_list_aead_algo_name): Remove.
(my_strusage): Remove output of AEAD algos.
(main): Remove code from the --aead options.
* g10/encrypt.c (encrypt_seskey): Make file local.
(use_aead): Remove requirement for rfc4880bis. Always return
AEAD_ALGO_OCB.
* g10/main.h (DEFAULT_AEAD_ALGO): Removed unused macro.
* g10/misc.c (default_aead_algo): Remove.
* g10/pkclist.c (select_aead_from_pklist): Return AEAD_ALGO_OCB or 0.
(select_algo_from_prefs): Remove personal AEAD algo setting.
* g10/keygen.c (keygen_set_std_prefs): Remove AEAD preference option
parsing.
* g10/options.h (opt): Remove def_aead_algo and personal_aead_prefs.
--
Due to the meanwhile expired patent on OCB there is no more reason for
using EAX. Thus we forcefully use OCB if the AEAD feature flag is set
on a key.
* g10/gpg.c (oCompatibilityFlags): New.
(opts): Add option.
(compatibility_flags): New list.
(main): Set flags and print help.
* g10/options.h (opt): Add field compatibility_flags.
--
No flags are yet defined but it is good to have the framework.
* dirmngr/dirmngr.h (struct ldap_server_s): Add field areconly.
* dirmngr/ldapserver.c (ldapserver_parse_one): Parse "areconly"
* dirmngr/ks-engine-ldap.c (my_ldap_connect): Implement this flag.
* dirmngr/dirmngr_ldap.c: Add option --areconly
(connect_ldap): Implement option.
* dirmngr/ldap.c (run_ldap_wrapper): Add and pass that option.
--
This flag is used to pass the Windows specific option
LDAP_OPT_AREC_EXCLUSIVE. It is ignored on other systems.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PUBKEY_USAGE_RENC): New.
(PUBKEY_USAGE_TIME): New.
(PUBKEY_USAGE_GROUP): New.
* g10/getkey.c (parse_key_usage): Set the new key flags.
* g10/keyedit.c (show_key_with_all_names_colon): Show the new key
flags.
* g10/keyid.c (usagestr_from_pk): Ditto
* g10/keylist.c (print_capabilities): Ditto.
* g10/keygen.c (parse_usagestr): Parse line and set new flags.
(quickgen_set_para): Show flags.
--
See draft-koch-openpgp-2015-rfc4880bis-00 for the current version.
Actually these flags have been in the draft for years now. This patch
is a first step to make use of them.
* agent/gpg-agent.c (oNoUserTrustlist,oSysTrustlistName): New.
(opts): Add new option names.
(parse_rereadable_options): Parse options.
(finalize_rereadable_options): Reset allow-mark-trusted for the new
option.
* agent/agent.h (opt): Add fields no_user_trustlist and
sys_trustlist_name.
* agent/trustlist.c (make_sys_trustlist_name): New.
(read_one_trustfile): Use here.
(read_trustfiles): Use here. Implement --no-user-trustlist.
--
With the global options we can now avoid that a user changes the
Root-CA trust by editing the trustlist.txt. However, to implement
this we need a new option so that we don't need to rely on some magic
like --no-allow-mark-trusted has been put into a force section.
The second option makes system administration easier as it allows to
keep the trustlist in a non-distributed file.
GnuPG-bug-id: 5990
* sm/gpgsm.c (oCompatibilityFlags): New option.
(compatibility_flags): new.
(main): Parse and print them in verbose mode.
* sm/gpgsm.h (opt): Add field compat_glags.:
(COMPAT_ALLOW_KA_TO_ENCR): New.
* sm/keylist.c (print_capabilities): Take care of the new flag.
* sm/certlist.c (cert_usage_p): Ditto.
* common/iobuf.c (iobuf_cancel): Use gnupg_remove
* common/mischelp.c (same_file_p): Allow for Unicode names.
--
Note that the second patch is used to handle Unicode filenames which
are symbolic links.
* agent/gpg-agent.c (main): Mark --supervised as deprecated.
* dirmngr/dirmngr.c (main): Ditto.
--
The supervised thing causes more trouble than it pretends to solve.
* tools/gpgtar.c: New option --with-log.
* tools/gpgtar.h (opt): Add field with_log.
* tools/gpgtar-extract.c (gpgtar_extract): Move directory string
building up. Add option --log-file if needed.
* tools/gpgtar-create.c (gpgtar_create): Make tmpbuf static becuase it
is used outside of its scope.
* tools/gpgtar-list.c (gpgtar_list): Ditto.
* tools/gpgtar.h (opt): Add new flags.
* tools/gpgtar.c: new options --batch, --yes, --no, --status-fd, and
--require-compliance.
(main): Init signals.
* tools/gpgtar-create.c: Add new header files.
(gpgtar_create): Rework to use a pipe for encryption and signing.
* tools/gpgtar-list.c: Add new header files.
(gpgtar_list): Rework to use a pipe for decryption.
* tools/gpgtar-extract.c: Add new header files.
(gpgtar_extract): Rework to use a pipe for decryption.
--
Fixes-commit: 40dbee86f3
* g10/options.h (opt): Add field flags.require_compliance.
* g10/gpg.c (oRequireCompliance): New.
(opts): Add --require-compliance.
(main): Set option.
* g10/mainproc.c (proc_encrypted): Emit error if non de-vs compliant.
(check_sig_and_print): Ditto.
* g10/encrypt.c (encrypt_crypt): Ditto.
--
Note that in the --encrypt and --verify cased other checks may kick in
earlier than this new --require-compliance controlled one.
* agent/trustlist.c (struct trustitem_s): Add flag "qual".
(read_one_trustfile): Rename arg "allow_include" to "systrust" and
change callers. Parse new flag "qual".
(istrusted_internal): Print all flags.
* sm/call-agent.c (istrusted_status_cb): Detect the "qual" flag.
* sm/gpgsm.h (struct rootca_flags_s): Add flag "qualified".
* sm/certchain.c (do_validate_chain): Take care of the qualified flag.
* dirmngr/validate.c (pk_algo_from_sexp): Make public. Support ECC.
* dirmngr/ocsp.c (check_signature): Remove hash preparation out to ...
(check_signature_core): here. This changes the arg s_hash to md.
Support ECDSA.
--
The test was done with my qualified signature certificate from the
Telesec and their responder http://tqrca1.ocsp.telesec.de/ocspr .
See also libksba commit rK24992a4a7a61d93759e1dbd104b845903d4589bf
* g10/filter.h (armor_filter_context_t): New fields dearmor_mode and
dearmor_state.
* g10/dearmor.c (dearmor_file): Set dearmor_mode.
* g10/armor.c (is_armor_header): Magic to switch to generic dearmor
mode.
(parse_header_line): Treat non OpenPGP armor in a special way.
(check_input): Ditto.
(radix64_read): Detect non OpenPGP armor END lines.
* sm/gpgsm.c (oKeyServer_deprecated): New.
(opts): Assign "ldapserver" to the new option and mark it as obsolete.
--
We want to use "ldapserver" in dirmngr but need to keep using
"keyserver" in gpgsm for existant versions of Kleopatra etc.
GnuPG-bug-id: 5801
* g10/keygen.c (ask_algo): Request keygrip via cpr_get.
* doc/help.txt (gpg.keygen.keygrip): New help text.
--
This change makes it possible to add an existing (sub)key to
another key via the status/command interface.
GnuPG-bug-id: 5771
* g10/gpg.c (oForbidGenKey, opts): New option.
(mopt): New local struct
(gen_key_forbidden): New.
(main): Set and handle the option.
--
In large system installation it is sometimes useful to make it a bit
harder for users to generate their own keys. An example is a policy
to not use on-disk keys.
* g10/tdbdump.c (export_ownertrust): Skip records marked with the
option --trusted-key.
(import_ownertrust): Clear the trusted-key flag.
* g10/tdbio.h (struct trust_record): Add field flags.
* g10/tdbio.c (tdbio_dump_record): Improve output.
(tdbio_read_record, tdbio_write_record): Handle flags.
* g10/trustdb.c (verify_own_keys): Clear stale trusted-keys and set
the flag for new --trusted-keys.
(tdb_update_ownertrust): Add arg as_trusted_key. Update callers.
--
GnuPG-bug-id: 5685
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oStealSocket): New.
(opts): Add option.
(steal_socket): New file global var.
(main): Set option.
(create_server_socket): Implement option.
* dirmngr/dirmngr.c (oStealSocket): New.
(opts): Add option.
(steal_socket): New file global var.
(main): Set option. Add comment to eventually implement it.
--
Note that --steal-socket has currently no effect on dirmngr because
dirmngr does this anway.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oOverrideComplianceCheck): New.
(opts): Add new option.
(main): Set option and add check for batch mode.
* g10/options.h (opt): Add flags.override_compliance_check.
* g10/sig-check.c (check_signature2): Factor complaince checking out
to ...
(check_key_verify_compliance): this. Turn error into a warning in
override mode.
--
There is one important use case for this: For systems configured
globally to use de-vs mode, Ed25519 and other key types are not
allowed because they are not listred in the BSI algorithm catalog.
Now, our release signing keys happen to be Ed25519 and thus we need to
offer a way for users to check new versions even if the system is in
de-vs mode. This does on purpose not work in --batch mode so that
scripted solutions won't accidently pass a signature check.
GnuPG-bug-id: 5655
* dirmngr/dirmngr.h (struct fingerprint_list_s): Add field binlen.
(opt): Add field ignored_certs.
* dirmngr/dirmngr.c: Add option --ignore-cert
(parse_rereadable_options): Handle that option.
(parse_ocsp_signer): Rename to ...
(parse_fingerprint_item): this and add two args.
* dirmngr/certcache.c (put_cert): Ignore all to be igored certs.
Change callers to handle the new error return.
--
This option is useful as a workaround in case we ill run into other
chain validation errors like what we fixed in
GnuPG-bug-id: 5639
* common/homedir.c (MYPROC_SELF_EXE): New.
(unix_rootdir): Use it here. Also support GNUPG_BUILD_ROOT as
fallback.
--
In addition this adds a fallback method for AIX etc which do not have
an easy way to get the info.
--
This is per OpenPGP WG design team decision from 2021-08-13
(raising a new wall after exactly 60 years ;-)
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (DIRMNGR_DEFAULT_KEYSERVER): Change to
keyserver.ubuntu.com.
* dirmngr/certcache.c (cert_cache_init): Disable default pool cert.
* dirmngr/http-ntbtls.c (gnupg_http_tls_verify_cb): Ditto.
* dirmngr/http.c (http_session_new): Ditto.
* dirmngr/server.c (make_keyserver_item): Use a different mapping for
the gnupg.net names.
--
Due to the unfortunate shutdown of the keyserver pool, the long term
defaults won't work anymore. Thus it is better to change them.
For https access keyserver.ubuntu.com is now used because it can be
expected that this server can stand the load from newer gnupg LTS
versions.
For http based access the Dutch Surfnet keyserver is used. However
due to a non-standard TLS certificate this server can not easily be
made the default for https.
Note: that the default server will be changed again as soon as a new
connected keyserver infrastructure has been established.
(cherry picked from commit 47c4e3e00a)
* common/recsel.c (recsel_parse_expr): Add flag -t.
* common/stringhelp.c: Remove assert.h.
(strtokenize): Factor code out to do_strtokenize.
(strtokenize_nt): New.
(do_strtokenize): Add arg trim to support the strtokenize_nt.
* common/t-stringhelp.c (test_strtokenize_nt): New test cases.
* tools/wks-util.c (wks_list_key): Use strtokenize_nt and the recsel
flag -t.
--
This fixes a bug with user ids with leading spaces because:
wks-client lists all mail addresses from the key and matches them to the
requested mail address.
If there are several user-ids all with the same mail address
wks-client picks one of them and then extracts exactly that user id.
However, here it does not match by the mail address but by the full
user-id so that we can be sure that there will be only one user-id in
the final key.
The filter built expression unfortunately strips leading blanks but
requires a verbatim match. Thus it won't find the user id again and
errors out.
The new -t flag and a non-trimming strtokenize solves the problem.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (PINENTRY_STATUS_PASSWORD_GENERATED): New.
(MAX_GENPIN_TRIES): Remove.
* agent/call-pinentry.c (struct entry_parm_s):
(struct inq_cb_parm_s): Add genpinhash and genpinhas_valid.
(is_generated_pin): New.
(inq_cb): Suppress constraints checking for a generated passphrase.
No more need for several tries to generate the passphrase.
(do_getpin): Store a generated passphrase/pin in the status field.
(agent_askpin): Suppress constraints checking for a generated
passphrase.
(agent_get_passphrase): Ditto.
* agent/command.c (cmd_get_passphrase): Ditto.
--
A generated passphrase has enough entropy so that all kind of extra
checks would only reduce the actual available entropy. We thus detect
if a passphrase has been generated (and not changed) and skip all
passphrase constraints checking.
* agent/gpg-agent.c (oCheckSymPassphrasePattern): New.
(opts): Add --check-sym-passphrase-pattern.
(parse_rereadable_options): Set option.
(main): Return option info.
* tools/gpgconf-comp.c: Add new option.
* agent/agent.h (opt): Add var check_sym_passphrase_pattern.
(struct pin_entry_info_s): Add var constraints_flags.
(CHECK_CONSTRAINTS_NOT_EMPTY): New to replace a hardwired 1.
(CHECK_CONSTRAINTS_NEW_SYMKEY): New.
* agent/genkey.c (check_passphrase_pattern): Rename to ...
(do_check_passphrase_pattern): this to make code reading
easier. Handle the --check-sym-passphrase-pattern option.
(check_passphrase_constraints): Replace arg no_empty by a generic
flags arg. Also handle --check-sym-passphrase-pattern here.
* agent/command.c (cmd_get_passphrase): In --newsymkey mode pass
CHECK_CONSTRAINTS_NEW_SYMKEY flag.
* agent/call-pinentry.c (struct entry_parm_s): Add constraints_flags.
(struct inq_cb_parm_s): New.
(inq_cb): Use new struct for parameter passing. Pass flags to teh
constraints checking.
(do_getpin): Pass constraints flag down.
(agent_askpin): Take constrainst flag from the supplied pinentry
struct.
--
Requirements for a passphrase to protect a private key and for a
passphrase used for symmetric encryption are different. Thus a
the use of a different pattern file will be useful. Note that a
pattern file can be used to replace the other passphrase constraints
options and thus we don't need to duplicate them for symmetric
encryption.
GnuPG-bug-id: 5517
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Change type of pinentry_formatted_passphrase
to int (as for other flags).
* agent/call-pinentry.c (setup_formatted_passphrase): Remove no longer
needed translated strings. Write option without value to Assuan
connection.
* agent/gpg-agent.c (opts): Use ARGPARSE_s_n for
oPinentryFormattedPassphrase.
(parse_rereadable_options): Set option to 1.
--
GnuPG-bug-id: 5553, 5517
* tools/gpg-check-pattern.c: Major rewrite.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
Here is a simple pattern file:
====================
# Pattern to reject passwords which do not comply to
# - at least 1 uppercase letter
# - at least 1 lowercase letter
# - at least one number
# - at least one special character
# and a few extra things to show the reject mode
# Reject is the default mode, ignore case is the default
#[reject]
#[icase]
# If the password starts with "foo" (case insensitive) it is rejected.
/foo.*/
[case]
# If the password starts with "bar" (case sensitive) it is rejected.
/bar.*/
# Switch to accept mode: Only if all patterns up to the next "accept"
# or "reject" tag or EOF match, the password is accepted. Otherwise
# the password is rejected.
[accept]
/[A-Z]+/
/[a-z]+/
/[0-9]+/
/[^A-Za-z0-9]+/
=================
Someone™ please write regression tests.
* sm/gpgsm.c (opts): Add option --ldapserver and make --keyserver an
alias.
--
We should use "keyserver" for OpenPGP and thus it is better to allow
for "ldapserver" here - it is the same convention as now used in
dirmngr.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit d6df1bf849)
* dirmngr/ks-engine-ldap.c (my_ldap_connect): Use LDAP_OPT_TIMEOUT.
* dirmngr/dirmngr.c (main): Move --ldaptimeout setting to ...
(parse_rereadable_options): here.
--
Note that this has not yet been tested. In fact a test with OpenLDAP
using a modified route got stuck in the connection attempt. Maybe it
works on Windows - will be tested later.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 317d5947b8)
* dirmngr/dirmngr.c (opts): Add option --ldapserver.
(ldapserver_list_needs_reset): New var.
(parse_rereadable_options): Implement option.
(main): Ignore dirmngr_ldapservers.conf if no --ldapserver is used.
* dirmngr/server.c (cmd_ldapserver): Add option --clear and list
configured servers if none are given.
--
This option allows to specify LDAP keyserver in dirmngr instead of
using gpgsm.conf.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit ff17aee5d1)
* common/keyserver.h: Remove.
* sm/gpgsm.h (struct keyserver_spec): Remove.
(opt): Change keyserver to a strlist_t.
* sm/gpgsm.c (keyserver_list_free): Remove.
(parse_keyserver_line): Remove.
(main): Store keyserver in an strlist.
* sm/call-dirmngr.c (prepare_dirmngr): Adjust for the strlist. Avoid
an ambiguity in dirmngr by adding a prefix if needed.
* g10/options.h (struct keyserver_spec): Move definition from
keyserver.h to here. Remove most fields.
* g10/keyserver.c (free_keyserver_spec): Adjust.
(cmp_keyserver_spec): Adjust.
(parse_keyserver_uri): Simplify.
(keyidlist): Remove fakev3 arg which does not make any sense because
we don't even support v3 keys.
--
We now rely on the dirmngr to parse the keyserver specs. Thus a bad
specification will not be caught immediately. However, even before
that dirmngr had stricter tests.
Signed-off-by: Werner Koch <wk@gnupg.org>
Ported-from: 9f586700ec
* tests/cms/samplemsgs/: Add sample messages.
* sm/gpgsm.c (main): Use gpgrt_fcancel on decryption error.
* sm/decrypt.c (decrypt_gcm_filter): New.
(gpgsm_decrypt): Use this filter if requested. Check authtag.
--
Note that the sample message pwri-sample.gcm.p7m is broken: The
authtag is duplicated to the authEncryptedContentInfo. I used a
temporary code during testing hack to that test message out.
* agent/command-ssh.c (ssh_handler_request_identities): Remove double
check of ERR.
* g10/getkey.c (get_pubkey_byname): Remove double use of break.
* g10/pkglue.c (pk_encrypt): Handle possible NULL-ptr access due to
failed malloc.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (read_p15_info): Improve D-TRUST card detection.
(do_getattr): Fix faulty code for the last commit. Append the product
name to MANUFACTURER.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_import_fprint_ntds): New.
* g10/getkey.c (get_pubkey_byname): Detect an attempt to search by
fingerprint in no_local mode.
--
See the man page. For testing use
gpg --auto-key-locate local,wkd,keyserver --locate-external-key \
FINGERPRINT
with at least one LDAP keyserver given in dirmngr.conf. On Windows
"ntds" may be used instead or in addtion to "keyserver".
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/keylist.c (do_show_certs): New.
(gpgsm_show_certs): New.
* sm/gpgsm.c (aShowCerts): New.
(opts): Add --show-certs.
(main): Call gpgsm_show_certs.
--
I have been using libksba test programs for countless times to look at
certificates and I always wanted to add such a feature to gpgsm. This
is simply much more convenient.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/comopt.c, common/comopt.h: New.
* common/Makefile.am: Add them.
* g10/gpg.c: Include comopt.h.
(main): Also parse common.conf.
* sm/gpgsm.c: Include comopt.h.
(main): Set a flag for the --no-logfile option. Parse common.conf.
* tools/gpgconf-comp.c (known_options_gpg): Remove "use-keyboxd", add
pseudo option "use_keyboxd".
(known_pseudo_options_gpg): Add pseudo option "use_keyboxd".
(known_options_gpgsm): Remove "use-keyboxd".
* tests/openpgp/defs.scm (create-gpghome): Create common.conf.
* doc/examples/common.conf: New.
--
Note that --use-keybox still works but prints a warning. We will
eventually remove this option becuase it was marked as an experimental
feature anyway.
It would be too confusing if gpg and gpgsm use different key storages.
Further, other components (e.g. dirmngr or gpg-wks-client) which call
gpg or gpgsm need to be aware that the keyboxd is used and pass that
option on the command line. Now that common.conf is always read (even
if --no-options is used) those tools will work instantly.
* scd/app-p15.c: Include openpgpdefs.h.
(struct prkdf_object_s): Add fields have_keytime and ecdh_kdf.
(read_p15_info): Set ecdh_kdf.
(keygrip_from_prkdf): Flag that we have the keytime.
(send_keypairinfo): Send the key time only if valid.
(send_key_fpr_line): New.
(send_key_fpr): New.
(do_getattr): Add KEY-FPR.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/ks-engine-ldap.c (ks_ldap_get): Print a SOURCE status.
* g10/options.h (opts): New field expl_import_self_sigs_only.
* g10/import.c (parse_import_options): Set it.
* g10/keyserver.c (keyserver_get_chunk): Add special options for LDAP.
--
I can be assumed that configured LDAP servers are somehow curated and
not affected by rogue key signatures as the HKP servers are. Thus we
can allow the import of key signature from LDAP keyservers by default.
GnuPG-bug-id: 5387
--
The tpm2d patches introduced a new --edit-key command: keytotpm. Add
a descriptive entry explaining what it does and how it works.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* scd/scdaemon.h (opt): Add field opcsc_shared.
* scd/scdaemon.c (opcscShared): New.
(opts): Add "--pcsc-shared".
(main): Set flag.
* scd/apdu.c (connect_pcsc_card): Use it.
(pcsc_get_status): Take flag in account.
* scd/app-openpgp.c (cache_pin): Bypass in shared mode.
(verify_chv2: Do not auto verify chv1 in shared mode.
* scd/app-piv.c (cache_pin): By pass caceh in shared mode.
--
This option should in general not be used. The patch tries to limit
bad effects but using shared mode is somewhat dangerous depending on
the other PC/SC users.
* scd/app-piv.c (app_select_piv): Allow for full AID.
--
It appears that SP-800-73-x is not too clear about the format of these
objects. Many current cards (such as the Yubikey 5 series) apparently
have only the PIX in DO 0x4F and only the RID in object 0x79/0x4F.
However, other cards as well as the PivApplet Javacard applet have the
full AID in 0x4F (which actually seems closer to what the standard
says). PivApplet also has the full AID in 0x79/0x4F, but this is
probably incorrect. (Here is a long discussion of the matter from an
OpenSC author:
https://github.com/arekinath/PivApplet/issues/43#issuecomment-772649709)
[Taken from a mail to gnupg-devel date 2021-02-03.]
Signed-off-by: Werner Koch <wk@gnupg.org>
--
This is based on a patch by
Co-authored-by: Thorsten Behrens <Thorsten.Behrens@CIB.de>
Co-authored-by: Todd Zullinger <tmz@pobox.com>
regarding Libassuan sent to gnupg-devel on 2018-02-02
* g10/gpg.c (oForceSignKey,opts): New option "--force-sign-key".
(main): Set it.
* g10/options.h (opt): New flag flags.force_sign_key.
* g10/keyedit.c (sign_uids): Use new flag.
--
GnuPG-bug-id: 4584
* scd/app-p15.c (struct gpgusage_flags_s): New.
(struct prkdf_object_s): Add field gpgusage.
(struct app_local_s): Add field any_gpgusage.
(dump_gpgusage_flags): New.
(read_p15_info): Parse athe gpgusage flags.
(do_getattr): Take care of the gpgusage flags.
--
This features allows to mark keys to be used for OpenPGP. This is
done by putting additional extended key infos into the certificate
stored on the cards. Only if any such extended key usage is detected
for a stored certificate this new mode chimes in.
This feature gives the card issuer a high flexibility on how to make
sure certain keys are used with OpenPGP.
* common/init.c (_init_common_subsystems) [W32]: Set the codepage to
UTF-8 for input and putput. Switch gettext to UTF-8.
* tools/gpgconf.c (main): Display the input and output codepage if
they differ.
* g10/gpg.c (utf8_strings) [W32]: Make sure this is always set.
--
With this patch the former patch to use ReadConsoleW and WriteConsoleW
in ttyio.c are kind of superfluous because the ANSI version of these
functions are also able to read/write UTF-8 directly given the console
code page has been set correctly. However, this seems to work only
with recent versions of Windows-10.
GnuPG-bug-id: 4365
* dirmngr/ldap-parse-uri.c (ldap_parse_uri): Support a new gpgNtds
extension.
* dirmngr/ks-engine-ldap.c (my_ldap_connect): Do ldap_init always with
hostname - which is NULL and thus the same if not given. Fix minor
error in error code handling.
--
Note that "gpgNtds" is per RFC-4512 case insensitive and has not yet
been officially regisetered. Thus for correctness the OID can be
used:
1.3.6.1.4.1.11591.2.5 LDAP URL extensions
1.3.6.1.4.1.11591.2.5.1 gpgNtds=1 (auth. with current user)
Note that the value must be 1; all other values won't enable AD
authentication and are resevered for future use.
This has been cherry-picked from the 2.2 branch,
commit 55f46b33df
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: New option --allow-old-cipher-algos.
(set_compliance_option): Set --rfc4880bis explictly to SHA256 and
AES256. Allow old cipher algos for OpenPGP, rfc4880, and rfc2440.
* g10/options.h (opt): Add flags.allow_old_cipher_algos.
* g10/misc.c (print_sha1_keysig_rejected_note): Always print the note
unless in --quiet mode.
* g10/encrypt.c (setup_symkey): Disallow by default algos with a
blocklengt < 128.
(encrypt_crypt): Ditto. Fallback by default to AES instead of 3DES.
* g10/pkclist.c (algo_available): Take care of old cipher also.
(select_algo_from_prefs): Use AES as implicit algorithm by default.
* tests/openpgp/defs.scm (create-gpghome): Set allow-old-cipher-algos.
--
GnuPG-bug-id: 3415
* tools/symcryptrun.c: Remove.
* tools/Makefile.am: Ditto.
* doc/tools.texi: Remove man page.
* configure.ac: Remove build option and tests used only by this tool.
* Makefile.am (AM_DISTCHECK_CONFIGURE_FLAGS): Do not build
symcryptrun.
--
symcryptrun is too ancient to be of any use and has not been tested in
many years. Thus we should not distribute it anymore.
* g10/gpg.c (oPrintPKARecords): Remove.
(opts): Remove --print-pka-records.
(main): Remove "pka-lookups","pka-trust-increase" and other PKA stuff.
* g10/options.h (EXPORT_DANE_FORMAT): Remove.
(VERIFY_PKA_LOOKUPS, VERIFY_PKA_TRUST_INCREASE): Remove.
(KEYSERVER_HONOR_PKA_RECORD): Remove.
* g10/packet.h (pka_info_t): Remove.
(PKT_signature): Remove flags.pka_tried and pka_info.
* g10/parse-packet.c (register_known_notation): Remove
"pka-address@gnupg.org".
* g10/pkclist.c (check_signatures_trust): Remove PKA stuff.
* g10/call-dirmngr.c (gpg_dirmngr_get_pka): Remove.
* g10/export.c (parse_export_options): Remove "export-pka".
(do_export): Adjust for this.
(write_keyblock_to_output): Ditto.
(do_export_stream): Ditto.
(print_pka_or_dane_records): Rename to ...
(print_dane_records): this and remove two args. Remove PKA printing.
* g10/free-packet.c (free_seckey_enc, cp_pka_info): Adjust for removed
pka_info field.
* g10/getkey.c (get_pubkey_byname): Make AKL_PKA a dummy.
* g10/keyserver.c: Remove "honor-pka-record".
(keyserver_import_pka): Remove.
* g10/mainproc.c (get_pka_address): Remove.
(pka_uri_from_sig): Remove.
(check_sig_and_print): Remove code for PKA.
--
PKA (Public Key Association) was a DNS based key discovery method
which looked up fingerprint by mail addresses in the DNS. This goes
back to the conference where DKIM was suggested to show that we
already had a better method for this available with PGP/MIME. PKA was
was later superseded by an experimental DANE method and is today not
anymore relevant. It is anyway doubtful whether PKA was ever widely
used.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
With these modifications it is now possible to store and retrieve keys
from an AD without manually tweaking the schema. Permissions need to
be set manuallay, though.
--
I accidently added a gpgSubCertID attribute not realizing that the
pgpSubKeyID already carries the long keyid. Remove that. Note that
the pgpkeyID has the short keyid and the long keyid has the name
pgpCertID.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/ks-engine-ldap.c (SERVERINFO_): New constants.
(my_ldap_connect): Relace args pgpkeyattrp and real_ldapp by a new
serverinfo arg. Set the new info flags.
(ks_ldap_get): Adjust for change.
(ks_ldap_search): Ditto.
(ks_ldap_put): Ditto. Replace xmalloc by xtrymalloc. Change the DN
for use with NTDS (aka Active Directory).
* doc/ldap/gnupg-ldap-init.ldif (pgpSoftware): Update definition of
pgpVersion.
* doc/ldap/gnupg-ldap-ad-init.ldif: New.
* doc/ldap/gnupg-ldap-ad-schema.ldif: New.
--
This is a first take on better Active Directory support. The main
change for NTDS in the code is that the an top-RDN of CN is used
instead of the old pgpCertID. More changes to come; for example using
and storing the fingerprint.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpg.texi: Add parameters for batch generation of ECC keys.
--
There are parameters required for batch generation of ECC keys which
weren't mentioned in the documentation.
Signed-off-by: Jens Meißner <meissner@b1-systems.de>
* scd/app.c (is_same_serialno): New.
(check_application_conflict): Use this.
(select_application): Ditto.
(app_switch_current_card): Ditto.
* scd/app-openpgp.c (check_keyidstr): Ignore the card version and also
compare case insensitive.
--
This is required because we change what we emit as serialno of OpenPGP
cards but existing keys still use the old form of the serial
number (i.e. with a firmware version).
See-commit: 3a8250c020
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (pref_hint): Change from union to struct and add field
'exact'. Adjust callers.
* g10/pkclist.c (algo_available): Take care of the exact hint.
* g10/sign.c (sign_file): Rework the hash detection from
recipient prefs.
--
This fixes a encrypt+sign case like: One recipient key has SHA512 as
highest ranked hash preference but the the signing key is a 256 bit
curve. Because we don't want to use a truncated hash with ECDSA, we
need to have an exact match - this is in particular important for
smartcard which check that the hash matches the curves.
Signed-off-by: Werner Koch <wk@gnupg.org>
Ported-from-stable: aeed0b93ff
* scd/command.c (reset_notify): Add option --keep-lock.
(do_reset): Add arg keep_lock.
(cmd_lock): Send progress status.
* g10/call-agent.c (agent_scd_apdu): Add more pseudo APDUs.
* g10/card-util.c (send_apdu): Ditto.
(factory_reset): Use lock commands.
--
This is required so that for example Kleopatra does not detect the
RESET and issues a SERIALNO of its own, thus conflicting with our
SERIALNO undefined.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/examples/vsnfd.prf: Rename to VS-NfD.prf.
* doc/examples/Automatic.prf: New.
* doc/Makefile.am (examples): Adjust.
* build-aux/speedo/w32/inst.nsi: Install gpg-check-pattern.exe and 3
example files.
* build-aux/speedo/w32/wixlib.wxs: Add new files.
--
Note that we renamed the existing example profile so that kleopatra
shows a nicer name. In fact the gpg4win installer just copies of
theses file but it is better to maintain them here.
gpg-check-pattern.exe can no be installed because we meanwhile have a
regex lib which works also on Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (parse_list_options): Add "sort-sigs".
(main): Make it the default.
* g10/options.h (LIST_SORT_SIGS): New.
* g10/keylist.c (cmp_signodes): New.
(list_keyblock_print): Sort signatures and factor signature printing
code out to ...
(list_signature_print): new.
--
In particular together with --full-timestamps this makes it easier to
see the history of key signatures and their revocations. The
self-signatures are also printed first. To disable this
--list-options no-sort-sigs
can be used.
Also don't print the annoying "no recocation reason specified"
message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/examples/vsnfd.prf: Remove enable-extended-key-format
--
This is no longer a valid option for gpg-agent because it
is now the default.
(cherry picked from commit d833030f8c)
* g10/options.h (IMPORT_BULK): New.
* g10/import.c (parse_import_options): Add "bulk-import".
* g10/call-keyboxd.c (in_transaction): New var.
(gpg_keyboxd_deinit_session_data): Run a commit if in bulk import
mode.
(create_new_context): Run a begin transaction if in bulk import mode.
--
Initial tests with this option are not very promising. Importing
about 3000 real world keys with --use-keyboxd and full logging took:
real 33m31.724s
user 19m54.265s
sys 2m49.662s
With bulk-import this saves a mere 12%:
real 29m36.542s
user 19m3.391s
sys 2m46.728s
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/backend-sqlite.c (table_definitions): Add column UINO to
userids.
(be_sqlite_local_s): Add fields select_col_uidno and
select_col_subkey.
(run_select_statement): Also select subkey or uidno column.
(be_sqlite_search): Return their values.
(store_into_userid): Store the UIDNO.
* kbx/backend-support.c (be_return_pubkey): Extend PUBKEY_INFO.
--
For an existing database adding the new column to the table userid is
straightforward. However if the original version of the schema used an
integer for the keyid column, that column has likely be renamed. Make
sure that the NOT NULL constraint has also be removed; check the
SQLite documentation on how this can be done.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (send_keypair_info): Emit the algo string as part
of a KEYPAIRINFO.
* scd/command.c (do_readkey): Ditto.
* scd/app-piv.c (do_readkey): Ditto.
* scd/app-nks.c (do_learn_status_core): Ditto.
(struct fid_cache_s): Add field algostr.
(flush_fid_cache): Release it.
(keygripstr_from_pk_file): Fill it and add it to the cache. Use a
single exit label.
* scd/app-help.c (app_help_get_keygrip_string_pk): Add new arg
r_algostr. Change all callers.
--
This is helpful so that callers do not need to parse the key for this
basic information. Use "scd readkey --info-only" to return the info
status line instead of the key material; using just --info returns the
info in addition to the key material.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/backend-support.c (be_return_pubkey): Add args is_ephemeral and
is_revoked. Adjust callers.
* kbx/backend-sqlite.c: Alter table pubkey to add new columns.
(run_select_statement): Add new column to all selects.
(be_sqlite_search): Return the new flags.
--
For existing test databases the new column can be added with:
alter table pubkey add ephemeral integer not null default 0;
alter table pubkey add revoked integer not null default 0;
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gnupg-module-overview.svg: Add examples of GPGME aware
applications
--
Whenever I used this overview I needed to explain what this
meant so giving examples might help a bit and also illustrate
the codesharing between GpgOL, Kleopatra and KMail.
* scd/app-openpgp.c (data_objects): 0x00FA for binary data.
(do_getattr): Parse the data and send it in status lines.
(get_algorithm_attribute_string): New.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpgtar.c (oUtf8Strings): New.
(opts): Add option --utf8-strings.
(parse_arguments): Set option.
* tools/gpgtar.h (opt): Add field utf8strings.
* tools/gpgtar-create.c (name_to_utf8): New.
(fillup_entry_w32): Use that.
(scan_directory): Ditto.
(scan_directory) [W32]: Convert file name to utf8.
(gpgtar_create): Convert pattern.
--
Note that this works only with file names read from a file or if the
specified files on the command line are plain ascii. When recursing
into a directory Unicode file names work again. This limitation is
due to main(int, char**) which can't get the wchar version. We could
fix that but is needs a bit more work in our init code.
GnuPG-bug-id: 4083
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid. Delay setting of homedir until the new
chuid is done.
* sm/gpgsm.c (main): Delay setting of homedir until the new chuid is
done.
* tools/gpg-card.c (oChUid): New.
(opts): Add --chuid.
(changeuser): New helper var.
(main): Implement --chuid.
* tools/gpg-connect-agent.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (oChUid, opts): New option --chuid.
(main): Implement option.
--
This option will at least be useful for Scute.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/keylist.c (list_cert_colon): Emit a new "fp2" record.
(list_cert_raw): Print the SHA2 fingerprint.
(list_cert_std): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gpgrlhelp.c (read_write_history): New.
(gnupg_rl_initialize): Register new function.
* common/ttyio.c (my_rl_rw_history): New var.
(tty_private_set_rl_hooks): Add arg read_write_history.
(tty_read_history): New.
(tty_write_history): New.
* tools/gpg-card.c (HISTORYNAME): New.
(oNoHistory): New enum value.
(opts): New option --no-history.
(cmd_history): New.
(cmds): New command "history".
(interactive_loop): Read and save the history.
* tools/gpg-connect-agent.c (HISTORYNAME): New.
(opts): New option --no-history.
(main): Read and save the history. New command /history.
--
Yeah, finally we have stored history; I should have added this much
earlier.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (write_trust_status): Add arg mbox.
(check_signatures_trust): Appenmd mbox to the status lines.
--
GnuPG-bug-id: 4735
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (check_sig_and_print): Add failsafe check for PK.
Pass KEYBLOCK down do check_signatures_trust. Protect existsing error
ocde in case the signature expired.
* g10/pkclist.c (is_in_sender_list): New.
(check_signatures_trust): Add args keyblock and pk. Add new uid based
checking code.
* g10/test-stubs.c, g10/gpgv.c: Adjust stubs.
--
GnuPG-bug-id: 4735
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.c: Include tlv.h.
(cmd_writecert): Add option --openpgp.
(cmd_readcert): Ditto.
--
We use the CERT object for this and encapsulate the key block in a CMS
object.
Signed-off-by: Werner Koch <wk@gnupg.org>
