* common/i18n.c (i18n_init): Use gnupg_localedir() instead of LOCALEDIR.
(i18n_localegettext): Ditto.
* tools/gpgconf-comp.c (my_dgettext): Ditto.
--
On Unix, gnupg_localedir() returns the locale directory relative to
the root directory of the gnupg installation if specified in the
gpgconf.ctl. Otherwise, it returns the built-in LOCALEDIR.
GnuPG-bug-id: 5999
* common/recsel.c (recsel_parse_expr): Add flag -t.
* common/stringhelp.c: Remove assert.h.
(strtokenize): Factor code out to do_strtokenize.
(strtokenize_nt): New.
(do_strtokenize): Add arg trim to support the strtokenize_nt.
* common/t-stringhelp.c (test_strtokenize_nt): New test cases.
* tools/wks-util.c (wks_list_key): Use strtokenize_nt and the recsel
flag -t.
--
This fixes a bug with user ids with leading spaces because:
wks-client lists all mail addresses from the key and matches them to the
requested mail address.
If there are several user-ids all with the same mail address
wks-client picks one of them and then extracts exactly that user id.
However, here it does not match by the mail address but by the full
user-id so that we can be sure that there will be only one user-id in
the final key.
The filter built expression unfortunately strips leading blanks but
requires a verbatim match. Thus it won't find the user id again and
errors out.
The new -t flag and a non-trimming strtokenize solves the problem.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oCheckSymPassphrasePattern): New.
(opts): Add --check-sym-passphrase-pattern.
(parse_rereadable_options): Set option.
(main): Return option info.
* tools/gpgconf-comp.c: Add new option.
* agent/agent.h (opt): Add var check_sym_passphrase_pattern.
(struct pin_entry_info_s): Add var constraints_flags.
(CHECK_CONSTRAINTS_NOT_EMPTY): New to replace a hardwired 1.
(CHECK_CONSTRAINTS_NEW_SYMKEY): New.
* agent/genkey.c (check_passphrase_pattern): Rename to ...
(do_check_passphrase_pattern): this to make code reading
easier. Handle the --check-sym-passphrase-pattern option.
(check_passphrase_constraints): Replace arg no_empty by a generic
flags arg. Also handle --check-sym-passphrase-pattern here.
* agent/command.c (cmd_get_passphrase): In --newsymkey mode pass
CHECK_CONSTRAINTS_NEW_SYMKEY flag.
* agent/call-pinentry.c (struct entry_parm_s): Add constraints_flags.
(struct inq_cb_parm_s): New.
(inq_cb): Use new struct for parameter passing. Pass flags to teh
constraints checking.
(do_getpin): Pass constraints flag down.
(agent_askpin): Take constrainst flag from the supplied pinentry
struct.
--
Requirements for a passphrase to protect a private key and for a
passphrase used for symmetric encryption are different. Thus a
the use of a different pattern file will be useful. Note that a
pattern file can be used to replace the other passphrase constraints
options and thus we don't need to duplicate them for symmetric
encryption.
GnuPG-bug-id: 5517
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (is_gnupg_default_homedir): Use standard_homedir
instead of the constant which makes a difference on Windows.
(_gnupg_socketdir_internal) [W32]: Move the directory to LOCAL_APPDATA.
(gnupg_cachedir): Remove unsued function.
* common/sysutils.c (gnupg_rmdir): New.
* tools/gpgconf.c (main): s/rmdir/gnupg_rmdir/.
--
That is actually a more correct directory than APPDATA. This fixes
a problem with installations where the APPDATA is non a network drive
and the resulting socket filename is truncated in our socket helper
function (because we use sockaddr also for our local socket
emulation on Windows).
LOCAL_APPDATA is expected to be on the local box and thus in the
majority of cases the resulting socket file name will be short enough.
GnuPG-bug-id: 5537
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (AC_CHECK_HEADERS): Remove string.h and getopt.h.
* dirmngr/ks-engine-ldap.c: Remove including getopt.h.
* tools/make-dns-cert.c: Likewise.
--
Checking string.h is supported by AC_HEADER_STDC. Use of getopt.h
is only needed for getopt_long of GNU extention.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpg-check-pattern.c: Major rewrite.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
Here is a simple pattern file:
====================
# Pattern to reject passwords which do not comply to
# - at least 1 uppercase letter
# - at least 1 lowercase letter
# - at least one number
# - at least one special character
# and a few extra things to show the reject mode
# Reject is the default mode, ignore case is the default
#[reject]
#[icase]
# If the password starts with "foo" (case insensitive) it is rejected.
/foo.*/
[case]
# If the password starts with "bar" (case sensitive) it is rejected.
/bar.*/
# Switch to accept mode: Only if all patterns up to the next "accept"
# or "reject" tag or EOF match, the password is accepted. Otherwise
# the password is rejected.
[accept]
/[A-Z]+/
/[a-z]+/
/[0-9]+/
/[^A-Za-z0-9]+/
=================
Someone™ please write regression tests.
* tools/gpgtar-create.c (fillup_entry_w32): Move parentheses.
--
Fixes-commit: 8b8925a2bd
The bug is so obvious that I wonder why it was not reported more often
on Windows. (Adding 1 to MAXDWORD (0xfffffff) always gives 0 for the
product).
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (scd_readkey): Add arg create_shadow.
* tools/gpg-card.c (list_one_kinfo): Add arg create_shadow and pass it
down to scd-readkey. Change all callers to convey this arg.
(cmd_list): Add option --shadow.
* common/comopt.c, common/comopt.h: New.
* common/Makefile.am: Add them.
* g10/gpg.c: Include comopt.h.
(main): Also parse common.conf.
* sm/gpgsm.c: Include comopt.h.
(main): Set a flag for the --no-logfile option. Parse common.conf.
* tools/gpgconf-comp.c (known_options_gpg): Remove "use-keyboxd", add
pseudo option "use_keyboxd".
(known_pseudo_options_gpg): Add pseudo option "use_keyboxd".
(known_options_gpgsm): Remove "use-keyboxd".
* tests/openpgp/defs.scm (create-gpghome): Create common.conf.
* doc/examples/common.conf: New.
--
Note that --use-keybox still works but prints a warning. We will
eventually remove this option becuase it was marked as an experimental
feature anyway.
It would be too confusing if gpg and gpgsm use different key storages.
Further, other components (e.g. dirmngr or gpg-wks-client) which call
gpg or gpgsm need to be aware that the keyboxd is used and pass that
option on the command line. Now that common.conf is always read (even
if --no-options is used) those tools will work instantly.
* tools/gpgconf-comp.c (known_pseudo_options_gpg): Add
"compliance_de_vs".
* g10/gpg.c (gpgconf_list): Returh that pseudo option.
--
Of course this will always return false for this version of gnupg.
But as soon as this version has been approved we have everything ready
for a runtime check.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.c (cmd_list): Add flag --reread.
* tools/card-call-scd.c (scd_learn): New arg reread.
* tools/card-call-scd.c (release_card_info): Fix releasing of the new
label var.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.h (struct key_info_s): Add field 'label'.
* tools/card-call-scd.c (learn_status_cb): Parse KEY-LABEL.
(scd_learn): Always request KEY-LABEL.
* tools/gpg-card.c (nullnone): New.
(list_one_kinfo, list_card): Use it. Print the label.
--
PKCS#15 defines label which help to understand for what a key is
intended. Print them.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_component_check_options): Increase array.
--
I missed to fix that one with the last patch.
Note that there was no problem in 2.2 at thismlocation - probably
because it had been manually backported once.
GnuPG-bug-id: 5366
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (known_options_gpg, known_options_gpgsm): No
flags needed for pseudo options.
(known_pseudo_options_gpg, known_pseudo_options_gpgsm): New.
(gc_component): Add field known_pseudo_options.
(struct read_line_wrapper_parm_s): New.
(read_line_wrapper): New.
(retrieve_options_from_program): Use read_line_wrapper to handle
pseudo options.
--
GnuPG-bug-id: 5341
Due to reading the list of options from the argparser of the
component, we had no more information about the pseudo options and
thus could not emit them. Well, there is just one pseudo option right
now, but with this change we have a generalized concept for them:
Pseudo options are used to convey information from a component to
gpgconf; for example build-in values.
* tools/gpg-card.c (cmd_writecert): Allow the other key references.
(cmd_readcert): Ditto.
--
See previous commit for testing info.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tpm2d: New directory.
* Makefile.am (SUBDIRS): Add directory.
* configure.ac: Detect libtss and decide whether to build tpm2d.
* am/cmacros.am: Add a define.
* util.h (GNUPG_MODULE_NAME_TPM2DAEMON): New.
* common/homedir.c (gnupg_module_name): Add tpm2d.
* common/mapstrings.c (macros): Add "TPM2DAEMON".
* tools/gpgconf.h (GC_COMPONENT_TPM2DAEMON): New.
* tools/gpgconf-comp.c (known_options_tpm2daemon): New.
(gc_component): Add TPM2.
(tpm2daemon_runtime_change): New.
* tpm2d/Makefile.am: New.
* tpm2d/command.c: New.
* tpm2d/ibm-tss.h: New.
* tpm2d/tpm2.c: New.
* tpm2d/tpm2.h: New.
* tpm2d/tpm2daemon.c: New.
* tpm2d/tpm2daemon.h: New.
---
This commit adds and plumbs in a tpm2daemon to the build to mirror the
operation of scdaemon. The architecture of the code is that
tpm2daemon.c itself is pretty much a clone of scd/scdaemon.c just with
updated function prefixes (this argues there could be some further
consolidation of the daemon handling code). Note that although this
commit causes the daemon to be built and installed, nothing actually
starts it or uses it yet.
Command handling
----------------
command.c is copied from the command handler in scd.c except that the
command implementation is now done in terms of tpm2 commands and the
wire protocol is far simpler. The tpm2daemon only responds to 4
commands
IMPORT: import a standard s-expression private key and export it to
TPM2 format. This conversion cannot be undone and the
private key now can *only* be used by the TPM2. To anyone
who gets hold of the private key now, it's just an
encrypted binary blob.
PKSIGN: create a signature from the tpm2 key. The TPM2 form private
key is retrieved by KEYDATA and the hash to be signed by
EXTRA. Note there is no hash specifier because the tpm2
tss deduces the hash type from the length of the EXTRA
data. This is actually a limitation of the tpm2 command
API and it will be interesting to see how this fares if the
tpm2 ever supports say sha3-256 hashes.
PKDECRYPT: decrypt (RSA case) or derive (ECC case) a symmetric key.
The tpm2 for private key is retrieved by KEYDATA and the
information used to create the symmetric key by EXTRA.
KILLTPM2D: stop the daemon
All the tpm2 primitives used by command.c are in tpm2.h and all the
tpm2 specific gunk is confined to tpm2.c, which is the only piece of
this that actually does calls into the tss library.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Changes from James' patch:
- gpgconf: The displayed name is "TPM" and not "TPM2". That
string is used by GUIs and should be something the user
understands. For example we also use "network" instead
of "Dirmngr".
- Removed some commented includes.
- Use 16 as emulation of GPG_ERR_SOURCE_TPM2.
- Silenced a C90 compiler warning and flags unused parameters.
- Removed "if HAVE_LIBS" from tpm2/Makefile.am and add missing
files so that make distcheck works.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/init.c (_init_common_subsystems) [W32]: Set the codepage to
UTF-8 for input and putput. Switch gettext to UTF-8.
* tools/gpgconf.c (main): Display the input and output codepage if
they differ.
* g10/gpg.c (utf8_strings) [W32]: Make sure this is always set.
--
With this patch the former patch to use ReadConsoleW and WriteConsoleW
in ttyio.c are kind of superfluous because the ANSI version of these
functions are also able to read/write UTF-8 directly given the console
code page has been set correctly. However, this seems to work only
with recent versions of Windows-10.
GnuPG-bug-id: 4365
* configure.ac (HAVE_NEWER_LIBGCRYPT): Remove conditional.
* tools/Makefile.am (gpg_pair_tool_SOURCES): We build it always.
--
This is because we require libgcrypt 1.9 anyway.
* tools/symcryptrun.c: Remove.
* tools/Makefile.am: Ditto.
* doc/tools.texi: Remove man page.
* configure.ac: Remove build option and tests used only by this tool.
* Makefile.am (AM_DISTCHECK_CONFIGURE_FLAGS): Do not build
symcryptrun.
--
symcryptrun is too ancient to be of any use and has not been tested in
many years. Thus we should not distribute it anymore.
* configure.ac: Require at least Libgcrypt 1.9.0. Remove all
GCRYPT_VERSION_NUMBER dependent code.
--
Only Libgcrypt 1.9 implements EAX which is a mandatory algorithm in
RFC4880bis.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/wks-util.c (wks_cmd_install_key): Don't set u+x on the file.
(ensure_policy_file): No need to make the policy file group writable.
--
The policy file is rarely changed thus no need to g+w. Setting +x on
a plain file does not make sense at all.
GnuPG-bug-id: 5214
* tools/gpg-wks-client.c (read_confirmation_request): Print trust
letter.
--
The trust letter gives a hint on what's wrong with the key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (main): Use gnupg_homedir instead of
default_homedir. Check for existance of the directory.
--
Fixes-commit: 7d95f2e7e7
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (scd_apdu): Add more pseudo APDUs.
* tools/card-misc.c (send_apdu): Handle them.
* tools/gpg-card.c (cmd_factoryreset): Use lock commands.
--
This is port of the code used with gpg-card-edit. Note that the
command "apdu" now also understands some extra keywords.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (main) <aApplyDefaults, aApplyProfile>: Create the
standard home directory.
--
This fixes a regression due to the fix for
GnuPG-bug-id: 4867
Before that change gpgsm implictly created the homedir while options
were collected. It is important to have this so that a login script
can create config files for new users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/Makefile.am (gpgconf-w32): New target. Builds gpgconf with
subsystem windows.
* build-aux/speedo/w32/wixlib.wxs: Package it.
--
This allows us to create scripts that call gpgconf without opening
a console. Using subsystem windows is better then to just close
the console after start as it avoids the console flashing up.
(cherry picked from commit c366e04958)
* tools/gpg-card.c (list_openpgp): Use ->apptype to determine card's
APP.
* g10/card-util.c (get_info_for_key_operation): Likewise.
(current_card_status): Even if its SERIALNO is not like OpenPGP card,
it's OpenPGP card when app says so.
--
GnuPG-bug-id: 5100
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/sysutils.h (struct gnupg_dirent_s): New.
* common/sysutils.c: Include dirent.h.
(struct gnupg_dir_s): New.
(gnupg_opendir, gnupg_readdir, gnupg_closedir): New. Change all
callers of opendir, readdir, and closedir to use these functions.
--
GnuPG-bug-id: 5098
* common/sysutils.c (gnupg_stat): New.
* common/sysutils.h: Include sys/stat.h.
--
Yet another wrapper for Unicode support on Windows.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (any8bitchar) [W32]: New.
(gnupg_open): New. Replace most calls to open by this.
* common/iobuf.c (any8bitchar) [W32]: New.
(direct_open) [W32]: Use CreateFileW if needed.
--
This is yet another step for full Unicode support on Windows.
GnuPG-bug-id: 5098
--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (gnupg_access): New. Replace all calls to access
by this wrapper.
* common/homedir.c (w32_shgetfolderpath): Change to return UTF-8
directory name.
(standard_homedir): Adjust for change.
(w32_commondir, gnupg_cachedir): Ditto.
--
Also use SHGetFolderPathW instead of SHGetFolderPathA on Windows.
This is required to correctly handle non-ascii filenames on Windows.
GnuPG-bug-id: 5098
* common/asshelp.c (lock_spawning): Use a dedicated name for keyboxd.
* common/homedir.c (keyboxd_socket_name): New.
(gnupg_module_name): Put keyboxd into libexecdir.
* tools/gpgconf-comp.c (known_options_keyboxd): New.
(gc_component): Add entry for keyboxd.
(keyboxd_runtime_change): New.
(gc_component_launch): Support keyboxd.
* tools/gpgconf.c (list_dirs): Emit new item keyboxd-socket.
(main): Also remove keyboxd socket.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/stringhelp.h (split_fields): Use const * for the strings in
the ARRAY.
(split_fields_colon): Likewise.
* common/stringhelp.c (split_fields, split_fields_colon): Fix
the implementation.
* agent/call-scd.c, agent/command.c: Follow the change.
* common/t-stringhelp.c, dirmngr/loadswdb.c: Likewise.
* g10/call-agent.c, tools/card-call-scd.c: Likewise.
* tools/card-yubikey.c, tools/gpg-card.c: Likewise.
* tools/gpg-card.h, tools/gpg-wks-client.c: Likewise.
* tools/gpgconf-comp.c, tools/gpgconf.c: Likewise.
* tools/wks-util.c: Likewise.
--
The strings in the ARRAY don't need to be released by caller, as those
are references. It's easier to follow the code when it's explicitly
const *.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* dirmngr/server.c (cmd_killdirmngr): Return 0.
* tools/gpg-connect-agent.c (main): Catch signals.
--
And we also print nicer diagnostics. The reason we need this is that
for example "gpgconf --kill dirmngr" uses gpg-connect-agent to send a
command to dirmngr. This may results in a SIGPIPE which in turn leads
to an annoying error message from gpgconf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_apdu): Add new option --data-atr.
* tools/gpg-card.c (cmd_apdu): Use that here. Also fix the --exlen
option and do not print the statusword in atr mode.
* tools/card-call-scd.c (scd_apdu): Detect atr mode anddon't assume a
status word.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (retrieve_options_from_program): Set verbose
flag for the arg parser only in --verbose mode.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (aShowCodepages): New.
(opts): New command --show-codepages.
(main) [W32]: Implement
--
This is a Windows helper command to quickly check which code pages are
currently used. Useful for debugging. Has no effect on Unix.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgtar.c (oUtf8Strings): New.
(opts): Add option --utf8-strings.
(parse_arguments): Set option.
* tools/gpgtar.h (opt): Add field utf8strings.
* tools/gpgtar-create.c (name_to_utf8): New.
(fillup_entry_w32): Use that.
(scan_directory): Ditto.
(scan_directory) [W32]: Convert file name to utf8.
(gpgtar_create): Convert pattern.
--
Note that this works only with file names read from a file or if the
specified files on the command line are plain ascii. When recursing
into a directory Unicode file names work again. This limitation is
due to main(int, char**) which can't get the wchar version. We could
fix that but is needs a bit more work in our init code.
GnuPG-bug-id: 4083
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgtar-create.c (gpgtar_create): Add args files_from and
null_names. Improve reading from a file.
* tools/gpgtar.c: Make global vars static.
(main): Remove tests for --files-from and --null option combinations.
Pass option variables to gpgtar_create.
--
GnuPG-bug-id: 5027
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid. Delay setting of homedir until the new
chuid is done.
* sm/gpgsm.c (main): Delay setting of homedir until the new chuid is
done.
* tools/gpg-card.c (oChUid): New.
(opts): Add --chuid.
(changeuser): New helper var.
(main): Implement --chuid.
* tools/gpg-connect-agent.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gpgrlhelp.c (read_write_history): New.
(gnupg_rl_initialize): Register new function.
* common/ttyio.c (my_rl_rw_history): New var.
(tty_private_set_rl_hooks): Add arg read_write_history.
(tty_read_history): New.
(tty_write_history): New.
* tools/gpg-card.c (HISTORYNAME): New.
(oNoHistory): New enum value.
(opts): New option --no-history.
(cmd_history): New.
(cmds): New command "history".
(interactive_loop): Read and save the history.
* tools/gpg-connect-agent.c (HISTORYNAME): New.
(opts): New option --no-history.
(main): Read and save the history. New command /history.
--
Yeah, finally we have stored history; I should have added this much
earlier.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (scd_change_pin): Add arg 'nullpin'.
* tools/gpg-card.h (struct card_info_s): Add field 'card_removed'.
* tools/gpg-card.c (fixup_scd_errors): New.
(maybe_set_card_removed): New.
(list_one_kinfo): Change type of first arg to get access to INFO. Set
card_removed flag.
(list_all_kinfo): Improve label alignment.
(cmd_list): Check that the current card is still available.
(cmd_passwd): Add option --nullpin and menu to chnage TCOS PINs.
(dispatch_command): Handle card_removed flag.
(interactive_loop): Ditto.
--
Note that that I was not able to change the NullPIN of the standard
PIN using a Signature V2 Brainpool test card. Changing the NullPIN of
the QES PIN worked, though. I checked the commands send to scdaemon
and they were correct - I used the very same command with
gpg-connect-agent last week to set a Pin for a production Brainpool
Signature card. Thus this might be a problem with this specific test
card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.h (gc_component_id_t): Align order with gc_component
array.
--
Fixes-commit: b4f1159a5b
gpgconf: Rewrite the gpgconf-comp module
from 2020-03-12
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.c: Include tlv.h.
(cmd_writecert): Add option --openpgp.
(cmd_readcert): Ditto.
--
We use the CERT object for this and encapsulate the key block in a CMS
object.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (scd_apdu): Add optional arg 'options'.
* tools/gpg-card.c (cmd_apdu): New.
(enum cmdids): Add cmdAPDU.
(dispatch_command): Add command "apdu".
(interactive_loop): Ditto.
--
This command is hidden because it can be used to brick a card. The
command is basically the same as sending "scd apdu" in
gpg-connect-agent but here we do full decoding and printing in hex.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.c (cmd_list): Take care of the need_sn_cmd flag.
(cmd_factoryreset): Clear that flag.
(dispatch_command): Set flag after a reset and after a
CARD_NOT_PRESENT error.
--
* tools/card-call-scd.c (learn_status_cb): Return the full value for
UIF. Add info about SM, MCL3, and PD.
* tools/gpg-card.h (struct card_info_s): Add corresponding fields.
* tools/gpg-card.c (list_openpgp): Print capabilities. Print the
permanent flag for UIF.
(cmd_uif): Implement.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (learn_status_cb): Always fill chvinfo.
* tools/gpg-card.h (struct card_info_s): Increase size of chvinfo and
chvmaxlen.
* tools/gpg-card.c (list_nks): New.
(print_a_version): Support single part version numbers.
(list_card): Call list_nks.
--
Note that chvmaxlen is not yet used with NKS.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.h (struct card_info_s): Add manufacturer fields.
* tools/card-call-scd.c (release_card_info): Release them.
(learn_status_cb): Parse MANUFACTURER attribute.
* tools/gpg-card.c (get_manufacturer): Remove.
(list_card): Use the new attribute.
* g10/call-agent.h (struct agent_card_info_s): Add manufacturer fields.
* g10/call-agent.c (agent_release_card_info): Release them.
(learn_status_cb): Parse MANUFACTURER attribute.
* g10/card-util.c (get_manufacturer): Remove.
(current_card_status): Use new attribute.
--
This does away with the duplicated OpenPGP vendor tables; they are now
at a better place (app-openpgp.c).
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gpg_agent_runtime_change): Remove unused var.
(scdaemon_runtime_change): Ditto.
(dirmngr_runtime_change): Ditto.
(gc_component_check_options): Pass --homedir if needed.
(retrieve_options_from_program): Take care of --homedir.
--
This is related to bug 4882 but different due all the code changes.
GnuPG-bug-id: 4882
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gc-opt-flags.h (GC_OPT_FLAG_RUNTIME): Move to ...
* tools/gpgconf-comp.c: here.
(known_options_scdaemon): Remove "options".
(known_options_dirmngr): Remove "options".
(known_options_gpgsm): Remove "options".
(known_options_gpg): Remove "options" and "keyserver".
(struct gc_option_s): Rename active t gpgconf_list.
(gc_component_list_options): Do not act upon active.
(option_check_validity): Ditto.
(is_known_option): Make it work correctly for unknown options.
(retrieve_options_from_program): Use renamed flag gpgconf_list only to
detect duplicated items from --gpgconf-list. Do not set runtime.
Only e set the options if set by --gpgconf-list; never clear them.
* agent/gpg-agent.c: Simplify the --gpgconf-list output.
* dirmngr/dirmngr.c: Ditto.
* g10/gpg.c: Ditto.
* kbx/keyboxd.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* tests/openpgp/gpgconf.scm: Use "compliance" instead of "keyserver"
for the string arg test.
--
There is no need to read the list of options from the components
unless they convey a default value. It is better to consult only the
list we have in gpgconf-comp.c to decide on whether an option should
be displayed. Right, this might mess up thing if a newer gpgconf
version is used with an older component, but we already print warnings
in this case and in general we do not want to support this anymore -
the times of gpg 1.4. and 2.0 are long over now.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): New options --auto-key-import,
--no-auto-key-import, and --no-include-key-block.
(gpgconf_list): Add them.
* g10/options.h (opt): Add field flags.auto_key_import.
* g10/mainproc.c (check_sig_and_print): Use flag to enable that
feature.
* tools/gpgconf-comp.c: Give the new options a Basic config level.
--
Note that the --no variants of the options are intended for easy
disabling at the command line.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.h (gc_component_t): Change type to ...
(gc_component_id_t): this.
(GC_COMPONENT_ANY): New, so that we can use that in gpgconf-comp.c
directly.
* tools/gpgconf-comp.c: Major rework.
--
The primary reason for this rework is to support the global options.
A second reason is to clean up the code and simplify it so that we do
not anymore need to maintain a list of options in the components _and_
in gpgconf-comp.c.
What we do now is to
1. Read the option tables directly from the components using
the new generic --dump-option-table option. This includes
the header (group) descriptions.
2. Read the default values from the components as before using
--gpgconf-list and update gpgconf's internal tables with
that info.
3. Read the options using gpgrt_argparser in the same way as we do
this in the components.
The changes also do away with the second level notion of backends;
they were only used for dirmngr's extra dirmngr_ldapservers.conf file.
We intend to remove that file and replace it with a regular option so
that it will be similar on how OpenPGP keyservers are specified.
The whole thing will currently be slower than before (in particular on
Windows) but we can optimize that by keeping a cached version of the
option tables and the default values in a per homedir cache file.
There is also some work planned to remove most of the data returned by
--gpgconf-list. What can also be done is to replace the internal
tables, which list the gpgconf maintainable options, by a configuration
file so that admins are able to maintain the list of these options.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Change oLoadExtensions, oStrict, and oNoStrict to
use ARGPARSE_ignore and remove the code in the option switch.
--
This looks better and is also required for further simplifications of
gpgconf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c: Remove all regular option descriptions. They
are now read in from the component. Also remove a few meanwhile
obsolete options.
* agent/gpg-agent.c: Add option description which were only set in
gpgconf-comp.c.
* dirmngr/dirmngr.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* g10/gpg.c: Ditto.
--
This second part removes all regular option descriptions because they
can be read from the components. A few were missing in the components
and thus moved to there.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (main): Set the coinfig directories.
* tools/gpgconf-comp.c (gc_backend): Change the name of the config
files.
(struct gc_option): Add new field 'attr'.
(retrieve_options_from_program): Rewrite to use gpgrt_argparser.
--
We need to do larger changes to gpgconf so that it is possible to get
also global config options and their attributes. The old code worked
along its own list of option and used a generic option file parser.
This has no support for global config files. We now use
gpgrt_argparser so that we to do exactly the same as the component
does and thus delivers the actual option values as seen by the
component.
This is just a first step and we need to change more things.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c: Fix spelling of "cannot". Use log_assert
instead of a plain assert.
(gc_percent_escape, percent_deescape): Fail on malloc error.
--
It does not make sense to use xtryalloc and failing then anyway. We
also should use our wrappers and not a plain realloc. Everywhere
elese we use the non-formal "can't" so it is better to do the same
here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Remove argparse.h.
* common/argparse.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* agent/gpg-agent.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS and include
argparse.h. Do this also for all main modules which use our option
parser except for gpg. Replace calls to strusage by calls to
gpgrt_strusage everywhere.
* g10/gpg.c (opts): Change type to gpgrt_opt_t. Flag oOptions and
oNoOptions with ARGPARSE_conffile and ARGPARSE_no_conffile.
(main): Change type of pargs to gpgrt_argparse_t. Rework the option
parser to make use of the new gpgrt_argparser.
--
This is not yet finished but a make check works. gpg has the most
complex and oldest option handling and thus this is the first
migration target. SE-Linux checks and version-ed config files are
missing and will be added later.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.c (cmd_list): add option --info. Factor soem code
out to ...
(print_card_list): new.
--
This change allows to use the printed s/n to sleect another card
instead of using the index. For example:
gpg/card> l --cards
0* D276000124010200FFFE50FF6E060000
1 D2760001240102000005000000370000
Now select the second card but do not print the entire listing, just
the card index, s/n and applications. We also select by s/n:
gpg/card> l --info D2760001240102000005000000370000
1* D2760001240102000005000000370000
Signed-off-by: Werner Koch <wk@gnupg.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* tools/card-call-scd.c (learn_status_cb): Adjust for recent change.
--
This adjusts for the chnage in scdaemon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.h (struct pubkey_s): Add field created.
* tools/card-keys.c (parse_key_record): Set that field.
* tools/gpg-card.c (print_shax_fpr): Print the fingerprint without
spaces for easier c+p.
(list_one_kinfo): Print the actual used fingerprint and creation date
from the keyblock.
--
A common problem with OpenPGP cards is that the fingerprint as stored
on the card does not match the actual fingerprint. Print both values
to be able to investigate such issues.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.h (opt): Add var no_key_lookup.
* tools/gpg-card.c (oNoKeyLookup): New const.
(opts): New option --no-key-lookup.
(list_one_kinfo): Add arg no_key_lookup and implement.
(list_all_kinfo): Add arg no_key_lookup.
(list_openpgp, list_piv, list_card): Ditto.
(cmd_list): New option --no-key-lookup.
--
Printing the OpenPGP and X.509 keys used for a specific card key can
be a lengthy operation. The new command line option and option to
"list" allows to suppress that part of the output.
* tools/gpg-card.c (generate_all_openpgp_card_keys): Add demo key
generation.
(generate_key): Allow generatiing one OpenPGP key.
--
This does now allows to create a single OpenPGP key optioanlly with a
specified parameter. For example to create an auth key:
gpg-card generate --algo=ed25519 OPENPGP.3
Using option --force will overwrite and already existing key.
scdaemon does here take care of swicthing the key attributes before
generating the key.
TODO: We need to add some more stuff to app-openpgp so that the user
is not annoyed by beeing asked to enter the Admin-PIN twice (change
the key attributes clear the verification state). gpg's key
generation also needs some tweaks for using an existing card key which
has no key stub in private-keys-v1.d.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (EXTERN_UNLESS_MAIN_MODULE): Add the definion only
here but now without the Norcroft-C. Change all other places where it
gets defined.
* common/iobuf.h (iobuf_debug_mode): Declare unconditionally as
extern.
* common/iobuf.c (iobuf_debug_mode): Define it here.
* agent/gpg-agent.c (INCLUDED_BY_MAIN_MODULE): Define here and also in
all main modules of all other programs.
* g10/main.h: Put util.h before the local header files.
--
This change is required for use with gcc/ld's LTO feature which does
not allow common blocks. Further gcc 10 will make -fno-common the
default and thus this chnage is always needed. What a pitty.
Co-authored-by: Tomáš Mráz
GnuPG-bug-id: 4831
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 21d9bd8b87)
- Applied respective chnages also to gpg-card and keyboxd.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.h (struct key_attr): Remove.
(struct key_info_s): Remove key_attr. Add keyalgo and keyalgo_id.
* tools/card-call-scd.c (learn_status_cb): Rework the key-attr info.
* tools/gpg-card.c (list_one_kinfo): Always show the algorithm; if
there is no key show the key attributes instead.
(list_openpgp): Do not print the "Key attributes".
(generate_key): Factor the repalce key pormpt out to ...
(ask_replace_keys): new.
(generate_openpgp): Rename to generate_all_openpgp_card_keys and add
an algo parameter.
(generate_generic): Rename to generate_key. Prepare generation of a
single OpenPGP key.
(cmd_generate): Revamp.
(ask_card_rsa_keysize): Remove.
(ask_card_keyattr): Remove.
(do_change_keyattr): Remove.
(cmd_keyattr): Remove.
(enum cmdids): Remove cmdKEYATTR.
(cmds): Ditto.
(dispatch_command): Ditto.
(interactive_loop): Ditto.
--
This change shows the key attributes of an OpenPGP card instead of the
key's algorithm if no key exists. It also remove the key-attr command
because for uniformity it is better to do this directly in
scd/app-openpgp.c At least for this new gpg-card tool.
There a couple of other changes but to the generate command but they
are not yet ready.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/watchgnupg.c: Include sys/wait.h.
(GNUPG_DEF_COPYRIGHT_LINE): Add a default value for standalone
building.
(get_logname): New.
(main): Use a default socket name and add option --homedir.
--
This is quite convenient and saves a lot of typing or shell alias
definitions.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (struct card_cardlist_parm_s): Add field
with_apps.
(card_cardlist_cb): Handle the new with_apps flag.
(scd_switchcard): New.
(scd_switchapp): New.
(scd_applist): New.
(scd_serialno): Pass --all also in --demand mode.
* tools/gpg-card.c (cmd_list): Simplify switching of cards. Add
switching of alls. Print a list of apps per card.
--
Note that the output format of "list --card" slightly changes: The
current card is indicated with an asterisk. That should not harm any
robust parsers which might already be in use. It is anyway a
development version.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (maybe_switch_app): Factor reselect code out to ...
(run_reselect): new.
(app_write_learn_status): Tweak diagnostics.
(app_do_with_keygrip): Run reselect if a card has more than one
switchable application.
* agent/call-scd.c (agent_card_serialno): Ditto.
* tools/card-call-scd.c (start_agent): Use option --all with SERIALNO.
(scd_serialno): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Resolved Conflicts:
* common/asshelp.c: Keep the new code in master for spawing under
Windows.
* g10/Makefile.am: Keep all new file.
* g10/photoid.c: Pass CTRL to pct_expando.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-pair-tool.c (create_dh_keypair): Just use
gcry_random_bytes for secret. Call gcry_ecc_mul_point
with G to get the public key.
(compute_master_secret): Use gcry_ecc_mul_point.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* configure.ac: New option --keyboxd-pgm.
(KEYBOXD_NAME, KEYBOXD_DISP_NAME): New ac_defines.
* common/util.h: Add substitutes for new error codes.
(GNUPG_MODULE_NAME_KEYBOXD): New.
* common/homedir.c (gnupg_module_name): Support
GNUPG_MODULE_NAME_KEYBOXD.
* common/asshelp.c (SECS_TO_WAIT_FOR_KEYBOXD): New.
(wait_for_sock): Support keyboxd.
(start_new_service): Ditto.
(start_new_keyboxd): New.
* tools/gpg-connect-agent.c: New options --keyboxd and
--keyboxd-program.
(start_agent): Implement new option.
--
This change allows us to test the new keyboxd using our standard
helper. It also provides the necessary code to start keyboxd on the
fly.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/wks-receive.c (decrypt_data): Change limit.
--
The former limit ~1MiB of was used during development.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_component_kill): Reverse the order.
--
The order matters in a corner case; On a busy machine, there was a
race condition between gpg-agent's running KILLAGENT command and its
accepting incoming request on the socket. If a request by
gpg-connect-agent was accepted, it resulted an error by sudden
shutdown. This change of the order can remove such a race.
Here, we know backend=0 is none.
GnuPG-bug-id: 4577
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpgparsemail.c (parse_message): Revert the change.
* tools/rfc822parse.c (transition_to_body): Set ERRNO.
(transition_to_header, insert_header): Likewise.
--
In the comment of rfc822parse_* functions, it explicitly explained
setting ERRNO on error. For parser errors, it may not have
appropriate ERRNO, in such a case, use ENOENT.
Fixes-commit: c13e459ffe
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpgconf-comp.cb (gc_options_dirmngr): correct capitalization
of Tor.
--
https://www.torproject.org/docs/faq.html.en#WhyCalledTor says:
> Note: even though it originally came from an acronym, Tor is not
> spelled "TOR". Only the first letter is capitalized. In fact, we can
> usually spot people who haven't read any of our website (and have
> instead learned everything they know about Tor from news articles) by
> the fact that they spell it wrong.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* tools/card-yubikey.c (yubikey_commands): Add new arg INFO and test
for Yubikey-5.
* tools/gpg-card.c (cmd_yubikey): Pass info to yubikey_commands.
--
The configuration can be read from a Yubikey-4 but not be written.
The mode command is also not useful because it allows only the
selection of transports. It does not allow to disable single
applications based on one transport (like OPGP and PIV). Thsi patch
shows an appropriate error message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR16)
(KEYDB_SEARCH_MODE_FPR20, KEYDB_SEARCH_MODE_FPR32): Remove. Switch
all users to KEYDB_SEARCH_MODE_FPR along with the fprlen value.
--
These search modes were added over time and there has until recently
be no incentive to remove the cruft. With the change for v5 keys I
finally went over all places and allowed the generic fingerprint mode
along with a given length of the fingerprint at all places.
Consequently the other modes can now be removed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgtar-create.c (gpgtar_create): Switch to the -C directory.
--
The -C option is pretty useful given that pattern are always relative
to the current directory. In contrast to GNU tar, the switching is
done only once.
Signed-off-by: Werner Koch <wk@gnupg.org>
