* checks/armor.test, cipher/des.c, g10/ccid-driver.c, g10/pkclist.c,
util/regcomp.c, util/regex_internal.c: correct the spelling of
"occured" to "occurred"
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* include/host2net.h (buf16_to_ulong, buf16_to_uint): New.
(buf16_to_ushort, buf16_to_u16): New.
(buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New.
--
This fixes sign extension on shift problems. Hanno Böck found a case
with an invalid read due to this problem. To fix that almost all uses
of "<< 24" and "<< 8" are changed by this patch to use an inline
function from host2net.h.
(back ported from commit 2183683bd6)
Signed-off-by: Werner Koch <wk@gnupg.org>
[dkg: rebased to STABLE-BRANCH-1-4]
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
For compatibility reasons a few new files had to be added.
Also added estream-printf as this is now used in app-openpgp.c and provides
a better and generic asprintf implementation than the hack we used for the
W32 code in ttyio.c. Card code is not yet finished.
* g10.c (main): Option --debug-ccid-driver may now be given
several times increase the debug level.
* ccid-driver.c (parse_ccid_descriptor): Mark SCR335 FW version
5.14 as good.
(do_close_reader): Never do a reset. The caller should instead
make sure that the reader has been closed properly. The new retry
code in ccid_slot_status will make sure that the readersatrts up
fine even if the last process didn't closed the USB connection
properly.
(ccid_get_atr): For certain readers try switching to ISO mode.
Thanks to Ludovic Rousseau for this hint and the magic numbers.
(print_command_failed): New.
(bulk_in): Use it here. Add new arg NO_DEBUG.
(ccid_slot_status): Disabled debugging.
reader type specific.
(scan_or_find_devices): Do not check the interface subclass in the
SPR532 kludge, as this depends on the firmware version.
(ccid_get_atr): Get the Slot status first. This solves the
problem with readers hanging on recent Linux 2.6.x.
(bulk_in): Add argument TIMEOUT and changed all callers to pass an
appropriate one. Change the standard timeout from 10 to 5 seconds.
(ccid_slot_status): Add a retry code with an initial short timeout.
(do_close_reader): Do an usb_reset before closing the reader.
(scan_or_find_devices): Add new args to return endpoint info and
interface number.
(ccid_open_reader, ccid_shutdown_reader): Take care of these new
args.
(bulk_in, bulk_out): Use the correct endpoints.
(ccid_transceive_apdu_level): New.
(ccid_transceive): Divert to above.
(parse_ccid_descriptor): Allow APDU level exchange mode.
(do_close_reader): Pass the interface number to usb_release_interface.
(pcsc_get_status): Implemented.
(reset_pcsc_reader): Implemented.
(open_pcsc_reader): Succeed even with no card inserted.
(open_ccid_reader): Set LAST_STATUS.
* iso7816.c (iso7816_select_application): Always use 0 for P1.
* status.h (STATUS_NEED_PASSPHRASE_PIN): New.
* status.c (get_status_string): Added.
* passphrase.c (ask_passphrase): Moved status printing to ..
* cardglue.c (pin_cb): .. here and issue new status message.
* keyedit.c (sign_uids): Don't include the leading LF in the
translatable string but print them separately.
* apdu.c (apdu_open_remote_reader) [_WIN32]: We don't have ENOSYS.
use_get_string_simple anymore.
* g10.c (list_config): New config option ccid-reader-id.
(gpgconf_list): Add "reader-port".
* apdu.c (open_ccid_reader): New arg PORTSTR. Pass it to
ccid_open_reader.
(apdu_open_reader): Pass portstr to open_ccid_reader.
* ccid-driver.c (ccid_get_reader_list): New.
(ccid_open_reader): Changed API to take a string for the reader.
Removed al the cruft for the libusb development vesion which seems
not to be maintained anymore and there are no packages anyway.
The stable library works just fine.
(struct ccid_reader_id_s): Deleted and replaced everywhere by a
simple string.
(usb_get_string_simple): Removed.
(bulk_in): Do valgrind hack here and not just everywhere.
* misc.c (get_signature_count): New. Get the signature count from a
smartcard. (pct_expando): Call it here so the %c expando becomes the
number of signatures issued. This allows for notations or the like with
an automatic signature count.
* ccid-driver.c (usb_get_string_simple): Replacement function to work with
older libusb.
* ccid-driver.c (read_device_info): Removed.
(make_reader_id, scan_or_find_devices): New.
(ccid_open_reader): Simplified by make use of the new functions.
(ccid_set_debug_level): New. Changed the macros to make use of
it. It has turned out that it is often useful to enable debugging
at runtime so I added this option.
* configure.ac: Check for readline. Make enable-card-support the
default. New option --without-readline. Allow the use of either
the development or the stable libusb.
* cardglue.h: Add members for CA fingerprints.
* cardglue.c (agent_release_card_info): Invalid them.
(learn_status_cb): Store them.
* app-common.h, app-openpgp.c, iso7816.c, iso7816.h
* apdu.c, apdu.h, ccid-driver.c, ccid-driver.h
* card-util.c: Updated from current gnupg-1.9.
* ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New.
* ccid-driver.c (ccid_open_reader): Support the stable 0.1 version
of libusb.
(ccid_get_atr): Handle short messages.
* apdu.c (my_rapdu_get_status): Implemented.
* apdu.c: Include <signal.h>.
* apdu.c (reader_table_s): Add function pointers for the backends.
(apdu_close_reader, apdu_get_status, apdu_activate)
(send_apdu): Make use of them.
(new_reader_slot): Intialize them to NULL.
(dump_ccid_reader_status, ct_dump_reader_status): New.
(dump_pcsc_reader_status): New.
(open_ct_reader, open_pcsc_reader, open_ccid_reader)
(open_osc_reader, open_rapdu_reader): Intialize function pointers.
(ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu)
(error_string): Removed. Replaced by apdu_strerror.
(get_ccid_error_string): Removed.
(ct_activate_card): Remove the unused loop.
(reset_ct_reader): Implemented.
(ct_send_apdu): Activate the card if not yet done.
(pcsc_send_apdu): Ditto.
* ccid-driver.h: Add error codes.
* ccid-driver.c: Implement more or less proper error codes all
over the place.
* apdu.c (apdu_send_direct): New.
(get_ccid_error_string): Add some error code mappings.
(send_apdu): Pass error codes along for drivers already supporting
them.
(host_sw_string): New.
(get_ccid_error_string): Use above.
(send_apdu_ccid): Reset the reader if it has not yet been done.
(open_ccid_reader): Don't care if the ATR can't be read.
(apdu_activate_card): New.
(apdu_strerror): New.
(dump_reader_status): Only enable it with opt.VERBOSE.
* iso7816.c (map_sw): Add mappings for the new error codes.
* apdu.c (open_ct_reader, open_pcsc_reader, open_ccid_reader)
(reset_ccid_reader, open_osc_reader): Call dump_reader_status only
in verbose mode.
* app-openpgp.c (do_getattr): Fix for sending CA-FPR.
* app-openpgp.c (app_openpgp_readkey): Fixed check for valid
exponent.
* app-openpgp.c (do_setattr): Sync FORCE_CHV1.
* card-util.c (change_login): Kludge to allow reading data from a
file.
(card_edit): Pass ARG_STRING to change_login.
(card_status): Print CA fingerprints.
(change_cafpr): New.
(card_edit): New command CAFPR.
* errors.h (G10ERR_NO_CARD, G10ERR_CANCELED): New error codes.
* errors.c (g10_errstr): New error codes G10ERR_NO_CARD,
G10ERR_CANCELED.
(list_one): Use const char* for i18n string helpers.
* keygen.c (do_generate_keypair, read_parameter_file): Really
close the files.
(do_generate_keypair): Create the secret key file using safe
permissions. Noted by Atom Smasher.
so that it can be used by getattr to update the structure.
(agent_scd_getattr): New.
* keylist.c (print_pubkey_info): Add FP arg for optional printing
to a stream. Changed all callers.
--change-pin. New options --ctapi-driver, --pcsc-driver and
--disable-ccid
* options.h (DBG_CARD_IO): New.
* cardglue.c, cardclue.h: Enhanced.
* card-util.c: New. Taken from current the gnupg 1.9 branch.
* app-common.h, app-openpgp.c, iso7816.c, iso7816.h, apdu.c
* apdu.h, ccid-driver.c, ccid-driver.h: New. Takem from the current
gnupg 1.9 branch withy minor changes to include directives.
* Makefile.am: Added these files.
