* agent/command-ssh.c (setup_ssh_env): Move code to ...
* agent/gpg-agent.c (agent_copy_startup_env): .. new function. Change
calllers.
* agent/command.c (start_command_handler): Call that fucntion for
restricted connections.
--
A remote connection is and should not be able to setup the local
session environment. However, unless --keep-display is used we would
be left without an environment and thus pinentry can't be used. The
fix is the same as used for ssh-agent connection: We use the default
environment as used at the startup of the agent.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (GPG_ERR_OBJ_TERM_STATE): New.
* scd/iso7816.c (map_sw): Add this error code.
* scd/app-openpgp.c (do_getattr): Return the life cycle indicator.
* scd/app.c (select_application): Allow a return value of
GPG_ERR_OBJ_TERM_STATE.
* scd/scdaemon.c (set_debug): Print the DBG_READER value.
* g10/call-agent.c (start_agent): Print a status line for the
termination state.
(agent_scd_learn): Make arg "info" optional.
(agent_scd_apdu): New.
* g10/card-util.c (send_apdu): New.
(factory_reset): New.
(card_edit): Add command factory-reset.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/http.c (send_request): Print TLS alert info
(connect_server): Detect bogus DNS entry.
--
1. Prints the TLS alert description.
2. Detect case where the DNS returns an IP address but the server is
not reachable at this address. This may happen for a server which
is reachable only at IPv6 but but the local machine has no full
IPv6 configuration.
* agent/agent.h (opt): Add field extra_socket.
(server_control_s): Add field restricted.
* agent/command.c: Check restricted flag on many commands.
* agent/gpg-agent.c (oExtraSocket): New.
(opts): Add option --extra-socket.
(socket_name_extra): New.
(cleanup): Cleanup that socket name.
(main): Implement oExtraSocket.
(create_socket_name): Add arg homedir and change all callers.
(create_server_socket): Rename arg is_ssh to primary and change
callers.
(start_connection_thread): Take ctrl as arg.
(start_connection_thread_std): New.
(start_connection_thread_extra): New.
(handle_connections): Add arg listen_fd_extra and replace the
connection starting code by parameterized loop.
* common/asshelp.c (start_new_gpg_agent): Detect the use of the
restricted mode and don't fail on sending the pinentry environment.
* common/util.h (GPG_ERR_FORBIDDEN): New.
* common/openpgp-oid.c (openpgp_oid_to_str): Fix unsigned underflow.
* common/t-openpgp-oid.c (BADOID): New.
(test_openpgp_oid_to_str): Add test cases.
--
The code has an obvious error by not considering invalid encoding for
arc-2. A first byte of 0x80 can be used to make a value of less then
80 and we then subtract 80 from that value as required by the OID
encoding rules. Due to the unsigned integer this results in a pretty
long value which won't fit anymore into the allocated buffer.
The fix is obvious. Also added a few simple test cases. Note that we
keep on using sprintf instead of snprintf because managing the
remaining length of the buffer would probably be more error prone than
assuring that the buffer is large enough. Getting rid of sprintf
altogether by using direct conversion along with membuf_t like code
might be possible.
Reported-by: Hanno Böck
Signed-off-by: Werner Koch <wk@gnupg.org>
Ported from libksba commit f715b9e156dfa99ae829fc694e5a0abd23ef97d7
* common/argparse.c (initialize): Use correct value.
--
This avoids a dead path in the argparse code.
It's not clear that this is needed, however, since
ARGPARSE_AMBIGUOUS_COMMAND is never actually used in the code.
Another approach would be to trim out ARGPARSE_AMBIGUOUS_COMMAND
entirely.
* gl/: Remove entire tree.
* configure.ac: Remove gnulib tests and the gl/ Makefile.
(setenv): Add to AC_CHECK_FUNCS.
* autogen.rc (extra_aclocal_flags): Set to empty.
* Makefile.am (ACLOCAL_AMFLAGS): Remove -I gl/m4
(SUBDIRS): Remove gl/.
* agent/Makefile.am (common_libs): Remove ../gl/gnulib.a
* common/Makefile.am (t_common_ldadd): Ditto.
* dirmngr/Makefile.am (dirmngr_LDADD): Ditto.
(dirmngr_ldap_LDADD, dirmngr_client_LDADD): Ditto.
* g10/Makefile.am (needed_libs): Ditto.
* g13/Makefile.am (g13_LDADD): Ditto.
* kbx/Makefile.am (kbxutil_LDADD): Ditto.
($(PROGRAMS)): Ditto.
* scd/Makefile.am (scdaemon_LDADD): Ditto.
* sm/Makefile.am (common_libs): Ditto.
* tools/Makefile.am (common_libs, commonpth_libs): Ditto.
* agent/gpg-agent.c: Remove "mkdtemp.h"
* g10/exec.c: Ditto.
* scd/scdaemon.c: Ditto.
* tools/symcryptrun.c: Ditto.
* common/sysutils.c: Remove "setenv.h"
* common/t-timestuff.c: Use putenv if setenv is not available.
--
gnulib has always been a cause of trouble in GnuPG because we used
only a very few functions and the complex include machinery of gnulib
is quite complex and the cause for many build problems for example on
OS X. This is not gnulib's fault but due to our limited use of gnulib
and that we only rarely update the gnulib code to avoid regressions.
In part two we will address the functions
mkdtemp
setenv
unsetenv
strpbrk
which may bot be implemented on all platforms. They are not required
on a libc based system.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/http.c (write_server) [W32]: Rework to use send() instead of
write even when build with npth.
(cookie_read) [W32]: Rework to use recv() instead of read even when
build with npth.
* configure.ac <adns>: Use adns_free as probe function for libadns.
(HAVE_ADNS_FREE): Remove bogus tests to set this and remove the macro.
(ADNSLIBS): Do not ac_subst - it is only used within configure.
--
adns_free is required on Windows anyway (for robustness reasons) and
it has been around for so long now that we do not need a separate
test. An upstream adns 1.5 has meanwhile been release but I doubt that
this has the required Windows code - and it is not libtool based
anyway.
--
Also fixed some of my own copyright notices due to the termination of
my assignment. The one displayed by --version is kept at FSF because
we had contributors in 2014 with FSF assignments and it gives the FSF
some visibility.
* agent/gpg-agent.c (oDebugQuickRandom): New.
(opts): New option --debug-quick-random.
(main): Use new option.
* common/asshelp.c (start_new_gpg_agent): Add hack to pass an
additional argument for the agent name.
* tests/openpgp/defs.inc: Pass --debug-quick-random to the gpg-agent
starting parameters.
* tests/openpgp/version.test: Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/argparse.h (ARGPARSE_INVALID_ARG): New.
* common/argparse.c: Include limits h and errno.h.
(initialize): Add error strings for new error constant.
(set_opt_arg): Add range checking.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Remove field use_standard_socket.
* agent/command.c (cmd_killagent): Always allow killing.
* agent/gpg-agent.c (main): Turn --{no,}use-standard-socket and
--write-env-file into dummy options. Always return true for
--use-standard-socket-p. Do not print the GPG_AGENT_INFO envvar
setting or set that envvar.
(create_socket_name): Simplify by removing non standard socket
support.
(check_for_running_agent): Ditto.
* common/asshelp.c (start_new_gpg_agent): Remove GPG_AGENT_INFO use.
* common/simple-pwquery.c (agent_open): Ditto.
* configure.ac (GPG_AGENT_INFO_NAME): Remove.
* g10/server.c (gpg_server): Do not print the AgentInfo comment.
* g13/server.c (g13_server): Ditto.
* sm/server.c (gpgsm_server): Ditto.
* tools/gpgconf.c (main): Simplify by removing non standard socket
support.
--
The indented fix to allow using a different socket than the one in the
gnupg home directory is to change Libassuan to check whether the
socket files exists as a regualr file with a special keyword to
redirect to another socket file name.
* configure.ac (NEED_NTBTLS_ABI, NEED_NTBTLS_VERSION): New.
(HTTP_USE_NTBTLS): New. Prefer over GNUTLS.
* m4/ntbtls.m4: New.
* m4/Makefile.am (EXTRA_DIST): Add new file.
* common/http.c: Add conditionals to eventually use NTBTLS.
--
This is only the configure stuff. If you have NTBTLS installed GNUTLS
will not be used but there won't be any https support either :-(.
This patch is used to have a real world test bench for the forthcoming
library.
* common/exechelp-posix.c: Remove weak pragmas.
* common/sexputil.c (make_canon_sexp_from_rsa_pk): Remove double
const.
--
We do not use Pth anymore and thus there is no more need for the weak
pragmas.
* common/openpgpdefs.h (PUBKEY_ALGO_EDDSA): Change to 22.
* g10/keygen.c (ask_curve): Reword the Curve25519 warning note.
--
In the hope that the IETF will eventually assign 22 for EdDSA using
the draft-koch-eddsa-for-openpgp-01 specs we start using this number.
* common/http.c (http_session_ref): Allow for NULL arg.
--
We always test for a an existing session and thus passing NULL as
session object should be allowed.
Reported-by: Jens Lechtenboerger
* common/openpgp-oid.c (struct oidtable): New.
(openpgp_curve_to_oid): Rewrite and allow OID as input.
(openpgp_oid_to_curve): Make use of the new table.
--
Due to the previous change we now usually store the OID with the
private key and not the name. Thus during import we do not anymore
need to map the name to an oid but can use the oid directly. We fix
that by extending openpgp_curve_to_oid to allow an oidstr as input.
* common/estream-printf.c, common/estream-printf.h: Change license.
* common/estream.c, common/estream.h: Ditto.
--
g10 Code is the sole copyright holder of Libestream and thus as CEO I
have the rights to to change the license. This copy here in GnuPG is
currently the most current one thus the change is recorded in this
repository. This change is also deemed valid for all older versions.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/t-timestuff.c (test_timegm): Use timegm if available.
(main): Set TX to UTC if timegm is not available.
--
On OpenBSD 5.3 i386 that test failed due to the use of mktime.
Reported-by: Claus Assmann
* common/iobuf.c (direct_open): Add arg MODE700.
(iobuf_create): Ditto.
* g10/openfile.c (open_outfile): Add arg RESTRICTEDPERM. Change call
callers to pass 0 for it.
* g10/revoke.c (gen_desig_revoke, gen_revoke): Here pass true for new
arg.
* g10/export.c (do_export): Pass true for new arg if SECRET is true.
--
GnuPG-bug-id: 1653.
Note that this works only if --output has been used.
* g10/getkey.c (get_user_id): Do not call xmalloc with 0.
* common/xmalloc.c (xmalloc, xcalloc): Take extra precaution not to
pass 0 to the arguments.
--
The problem did not occur in 1.x because over there the xmalloc makes
sure to allocate at least one byte. With 2.x for most calls the
xmalloc of Libgcrypt is used and Libgcrypt returns an error insteead
of silent allocating a byte. Thus gpg 2.x bailed out with an
"Fatal: out of core while allocating 0 bytes".
The extra code in xmalloc.c is for more robustness for the other
xmalloc calls.
* common/http.c (http_open): Add arg httphost.
(http_open_document): Pass NULL for httphost.
(send_request): Add arg httphost. If given, use HTTPHOST instead of
SERVER. Use https with a proxy if requested.
(http_verify_server_credentials): Do not stop at the first error
message.
* dirmngr/ocsp.c (do_ocsp_request): Adjust call to http_open.
* keyserver/curl-shim.c (curl_easy_perform): Ditto.
* dirmngr/ks-engine-http.c (ks_http_fetch): Ditto.
* dirmngr/ks-engine-hkp.c (ks_hkp_help): Ditto.
* common/Makefile.am ($(PROGRAMS)): New rule
(t_http_LDADD): Use libcommontls.a without directory prefix.
* dirmngr/Makefile.am ($(PROGRAMS)): New rule.
* agent/cvt-openpgp.c (try_do_unprotect_arg_s): Add field "curve".
(get_keygrip): Add and use arg CURVE.
(convert_secret_key): Ditto.
(convert_transfer_key): Ditto.
(get_npkey_nskey): New.
(prepare_unprotect): Replace gcrypt functions by
get_npkey_nskey. Allow opaque MPIs.
(do_unprotect): Use CURVE instead of parameters.
(convert_from_openpgp_main): Ditto.
(convert_to_openpgp): Simplify.
* g10/import.c (one_mpi_from_pkey): Remove.
(transfer_secret_keys): Rewrite to use the curve instead of the
parameters.
* g10/parse-packet.c (parse_key): Mark protected MPIs with USER1 flag.
* common/openpgp-oid.c (openpgp_curve_to_oid): Allow the use of
"NIST P-256" et al.
* g10/keygen.c (ask_curve): Add arg ALGO.
(generate_keypair): Rewrite the ECC key logic.
* tests/openpgp/ecc.test: Provide the "ecc" passphrase.
* common/http.c (http_session_t): Add field "refcount".
(_my_socket_new, _my_socket_ref, _my_socket_unref): Add debug code.
(send_request, my_npth_read, my_npth_write): Use SOCK object for the
transport ptr.
(http_session_release): Factor all code out to ...
(session_unref): here. Deref SOCK.
(http_session_new): Init refcount and transport ptr.
(http_session_ref): New. Ref and unref all assignments.
--
Having the reference counted session objects makes it easier for the
application to pass around only an estream. Without that the
application would need to implement an es_onclose machinery for the
session object.
* configure.ac (HAVE_NPTH): New ac_define.
* common/estream.c: Use USE_NPTH instead of HAVE_NPTH.
* common/http.c: Ditto. Replace remaining calls to pth by npth calls.
(connect_server): Remove useless _().
* common/exechelp-posix.c, common/exechelp-w32.c
* common/exechelp-w32ce.c: Use HAVE_PTH to include npth.h.
* common/init.c (_init_common_subsystems): Remove call to pth_init.
* common/sysutils.c (gnupg_sleep): Use npth_sleep.
* scd/ccid-driver.c (my_sleep): Ditto.
--
USE_NPTH is used in case were we may build with and without nPth. The
missing definition HAVE_NPTH didn't allowed us to build outher sources
with nPTh support.
* src/estream.c (estream_internal): Add field SAMETHREAD.
(init_stream_lock, lock_stream, trylock_stream, unlock_stream): Use it.
(parse_mode): Add arg SAMETHREAD and parse that keyword.
(es_initialize): Rename to ...
(init_stream_obj): this. Add arg SAMETHREAD.
(es_create): Add arg SAMETHREAD. Call init_stream_lock after
init_stream_obj.
(doreadline): Call es_create with samethread flag.
(es_fopen, es_mopen, es_fopenmem, es_fopencookie, do_fdopen)
(do_fpopen, do_w32open): Implement "samethread" keyword.
(es_freopen): Take samthread flag from old stream.
(es_tmpfile): Call es)_create w/o samethread.
--
Note: Unfortunately es_tmpfile has no mode arg so that we can't use
samethread.
* agent/gpg-agent.c (main): Make sure homedir is absolute.
* common/asshelp.c (lock_spawning): Create lock file with an absolute
name.
(start_new_gpg_agent): Use an absolute name for the socket and pass
option --homedir to the agent.
(start_new_dirmngr): Use an absolute name for the --homedir.
--
This patch makes gpg's --homedir option behave again like in older
versions. This is done by starting a new agent for each different
home directory. Note that this assumes --use-standard-socket is used
which is the default for 2.1.
* common/estream.c (es_freopen): Remove useless check for STREAM.
* kbx/keybox-blob.c (_keybox_create_x509_blob): Remove useless check
for BLOB.
* tools/sockprox.c (run_proxy): Do not fclose(NULL).
--
Found by Hans-Christoph Steiner with cppcheck.
* common/mischelp.h (JNLIB_GCC_HAVE_PUSH_PRAGMA): New.
* dirmngr/dirmngr.c (handle_tick): Factor time check out to ...
(time_for_housekeeping_p): new.
--
I am not sure whether that y2038 hack is really useful but it might
make me smile in my retirement.
* dirmngr/ks-engine-hkp.c (ks_hkp_search, ks_hkp_get): Print SOURCE
status lines.
* g10/call-dirmngr.c (ks_status_parm_s): New.
(ks_search_parm_s): Add field stparm.
(ks_status_cb): New.
(ks_search_data_cb): Send source to the data callback.
(gpg_dirmngr_ks_search): Change callback prototope to include the
SPECIAL arg. Adjust all users. Use ks_status_cb.
(gpg_dirmngr_ks_get): Add arg r_source and use ks_status_cb.
* g10/keyserver.c (search_line_handler): Adjust callback and print
"data source" disgnostic.
(keyserver_get): Print data source diagnostic.
--
It has often been requested that the actually used IP of a keyservers
is shown in with gpg --recv-key and --search-key. This is helpful if
the keyserver is actually a pool of keyservers. This patch does this.
* common/mischelp.h (JNLIB_GCC_A_PRINTF): Use __gnu_printf__
(JNLIB_GCC_A_NR_PRINTF): Ditto.
--
Our printf supports most of the GNU features and thus we can silence
the warnings from mingw.
* agent/call-scd.c (start_scd): Replace int by assuan_fd_t.
(start_pinentry): Ditto.
* common/asshelp.c (start_new_gpg_agent): Replace int by assuan_fd_t.
* common/dotlock.c (GNUPG_MAJOR_VERSION): Include stringhelp.h for
prototypes on Windows and some other platforms.
* common/logging.c (fun_writer): Declare addrbuf only if needed.
* g10/decrypt.c (decrypt_message_fd) [W32]: Return not_implemented.
* g10/encrypt.c (encrypt_crypt) [W32]: Return error if used in server
mode.
* g10/dearmor.c (dearmor_file, enarmor_file): Replace GNUPG_INVALID_FD
by -1 as temporary hack for Windows.
* g10/export.c (do_export): Ditto.
* g10/revoke.c (gen_desig_revoke, gen_revoke): Ditto.
* g10/sign.c (sign_file, clearsign_file, sign_symencrypt_file): Ditto.
* g10/server.c (cmd_verify, gpg_server) [W32]: Return an error.
--
The gpg server mode is not actual working and thus we can avoid the
warnings by explicitly disabling the mode. We keep it working under
Unix, though.
* common/estream.c (ESTREAM_MUTEX_UNLOCK): Use int dummy dummy
functions.
(ESTREAM_MUTEX_INITIALIZE): Ditto.
--
GnuPG-bug-id: 1566
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 571bcd4662)
Reolved conflicts:
common/estream.c
Warning: estream.c still uses pth_mutex_* which is definitely wrong.
Needs to be investigated.
* agent/gpg-agent.c [W32]: Include Several Windows header.
(opts): Change help text for enable-ssh-support.
(opts, main): Add option --enable-putty-support
(putty_support, PUTTY_IPC_MAGIC, PUTTY_IPC_MAXLEN): New for W32.
(agent_init_default_ctrl): Add and asssert call.
(putty_message_proc, putty_message_thread): New.
(handle_connections) [W32]: Start putty message thread.
* common/sysutils.c (w32_get_user_sid): New for W32 only
* tools/gpgconf-comp.c (gc_options_gpg_agent): Add
--enable-ssh-support and --enable-putty-support. Make the
configuration group visible at basic level.
* agent/command-ssh.c (serve_mmapped_ssh_request): New for W32 only.
--
This patch enables support for Putty. It has been tested with Putty
0.62 using an Unix created ssh key copied to the private-keys-v1.d
directory on Windows and with a manually crafted sshcontrol file. It
also works with a smartcard key.
May thanks to gniibe who implemented a proxy in Python to test the
putty/gpg-agent communication.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 9f32499f99)
Resolved conflicts:
NEWS
agent/agent.h
agent/gpg-agent.c: Convert from pth to npth.
common/sysutils.c
common/sysutils.h
* jnlib/argparse.h (ARGPARSE_OPT_IGNORE): New.
(ARGPARSE_TYPE_MASK): New, for internal use.
(ARGPARSE_ignore): New.
* jnlib/argparse.c (optfile_parse, arg_parse): Replace remaining
constants by macros.
(optfile_parse): Implement ARGPARSE_OPT_IGNORE.
(arg_parse): Exclide ignore options from --dump-options.
--
In addition to the ignore-invalid-option (commit 41d56433) it is often
useful to mark options in a configuration which as NOP. For example
options which have no more function at all but can be expected to be
found in existing conf files. Such an option (or command) may now be
given as
ARGPARSE_ignore (300, "obsolete-option")
The 300 is merely used as a non-valid single option name much like
group names or the 500+n values used for long options.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 54c54e2824)
Resolved conflicts:
common/argparse.c: Fixed.
* common/utf8conv.c: Remove dynload.h.
(load_libiconv): Remove. Remove all calls to it.
--
The iconv functions are standard feature on most systems and in any
case libiconv can be used to provide the functions. The old code used
to dlopen iconv.dll on Windows. This goes back to GnuPG-1 which was
designed as a one-binary program without any hard dependencies.
GnuPG2 however demands a lot of libraries anyway and thus there is no
more need for the fragile code to load a possible wrong version of
iconv.dll at runtime.
* g10/gpg.c (oLegacyListMode, opts, main): Add --legacy-list-mode.
* g10/options.h (struct opt): Add field legacy_list_mode.
* g10/keydb.h (PUBKEY_STRING_SIZE): New.
* g10/keyid.c (pubkey_string): New.
* g10/import.c (import_one, import_secret_one): Use pubkey_string.
* g10/keylist.c (print_seckey_info): Ditto.
(print_pubkey_info, print_card_key_info): Ditto.
(list_keyblock_print): Ditto.
* g10/mainproc.c (list_node): Ditto.
* g10/pkclist.c (do_edit_ownertrust, build_pk_list): Ditto.
* g10/keyedit.c (show_key_with_all_names): Ditto. Also change the
format.
(show_basic_key_info): Ditto.
* common/openpgp-oid.c (openpgp_curve_to_oid): Also allow "ed25519".
(openpgp_oid_to_curve): Downcase "ed25519"
--
For ECC it seems to be better to show the name of the curve and not
just the size of the prime field. The curve name does not anymore fit
into the "<size><letter>" descriptor (e.g. "2048R") and a fixed length
format does not work either. Thus the new format uses
"rsa2048" - RSA with 2048 bit
"elg1024" - Elgamal with 1024 bit
"ed25519" - ECC using the curve Ed25519.
"E_1.2.3.4" - ECC using the unsupported curve with OID "1.2.3.4".
unless --legacy-list-mode is given. In does not anymore line up
nicely in columns thus I expect further changes to this new format.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (map_cipher_openpgp_to_gcry): Use explicit mapping and
use enums for the arg and return value.
(map_cipher_gcry_to_openpgp): Ditto.
(openpgp_cipher_blocklen): Use constant macros.
(openpgp_cipher_test_algo): Use mapping function and prepare to
disable algorithms.
(openpgp_cipher_algo_name): Do not use Libgcrypt.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Replace
CGRY_CIPHER_* by CIPHER_ALGO_*.
* common/openpgpdefs.h (cipher_algo_t): Remove unused
CIPHER_ALGO_DUMMY.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sexputil.c (get_pk_algo_from_canon_sexp): Change to return a
string.
* g10/keygen.c (check_keygrip): Adjust for change.
* sm/certreqgen-ui.c (check_keygrip): Likewise.
* agent/pksign.c (do_encode_dsa): Remove bogus map_pk_openpgp_to_gcry.
* g10/misc.c (map_pk_openpgp_to_gcry): Remove.
(openpgp_pk_test_algo): Change to a wrapper for openpgp_pk_test_algo2.
(openpgp_pk_test_algo2): Rewrite.
(openpgp_pk_algo_usage, pubkey_nbits): Add support for EdDSA.
(openpgp_pk_algo_name): Rewrite to remove need for gcry calls.
(pubkey_get_npkey, pubkey_get_nskey): Ditto.
(pubkey_get_nsig, pubkey_get_nenc): Ditto.
* g10/keygen.c(do_create_from_keygrip): Support EdDSA.
(common_gen, gen_ecc, ask_keysize, generate_keypair): Ditto.
* g10/build-packet.c (do_key): Ditto.
* g10/export.c (transfer_format_to_openpgp): Ditto.
* g10/getkey.c (cache_public_key): Ditto.
* g10/import.c (transfer_secret_keys): Ditto.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Ditto.
* g10/mainproc.c (proc_pubkey_enc): Ditto.
* g10/parse-packet.c (parse_key): Ditto,
* g10/sign.c (hash_for, sign_file, make_keysig_packet): Ditto.
* g10/keyserver.c (print_keyrec): Use openpgp_pk_algo_name.
* g10/pkglue.c (pk_verify, pk_encrypt, pk_check_secret_key): Use only
OpenPGP algo ids and support EdDSA.
* g10/pubkey-enc.c (get_it): Use only OpenPGP algo ids.
* g10/seskey.c (encode_md_value): Ditto.
--
This patch separates Libgcrypt and OpenPGP public key algorithms ids
and in most cases completely removes the Libgcrypt ones. This is
useful because for Libgcrypt we specify the algorithm in the
S-expressions and the public key ids are not anymore needed.
This patch also adds some support for PUBKEY_ALGO_EDDSA which will
eventually be used instead of merging EdDSA with ECDSA. As of now an
experimental algorithm id is used but the plan is to write an I-D so
that we can get a new id from the IETF. Note that EdDSA (Ed25519)
does not yet work and that more changes are required.
The ECC support is still broken right now. Needs to be fixed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Remove check for uint64 and UINT64_C.
* include/types.h: Remove u64 stuff.
* common/types.h: Ditto.
--
There have been relicts from GnuPG-1.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgp-oid.c (openpgp_curve_to_oid): Change OID for
Ed25519. Add brainpool OIDs.
(openpgp_oid_to_curve): Ditto.
--
This change is required to the change in Libgcrypt. Note that we will
likely use a different OpenPGP algorithm ID for EdDSA and thus the
current Ed25519 implementation will not stay with us.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/membuf.c (put_membuf_printf): New.
--
This is just a convenience function for easier code readability.
Signed-off-by: Werner Koch <wk@gnupg.org>
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
* agent/findkey.c (key_parms_from_sexp): Add algo name "ecc".
(agent_is_dsa_key): Ditto.
(agent_is_eddsa_key): New. Not finished, though.
* agent/pksign.c (do_encode_eddsa): New.
(agent_pksign_do): Use gcry_log_debug functions.
* agent/protect.c (agent_protect): Parse a flags parameter.
* g10/keygen.c (gpg_curve_to_oid): Move to ...
* common/openpgp-oid.c (openpgp_curve_to_oid): here and rename.
(oid_ed25519): New.
(openpgp_oid_is_ed25519): New.
(openpgp_oid_to_curve): New.
* common/t-openpgp-oid.c (test_openpgp_oid_is_ed25519): New.
* g10/build-packet.c (gpg_mpi_write): Write the length header also for
opaque MPIs.
(gpg_mpi_write_nohdr): New.
(do_key): Use gpg_mpi_write_nohdr depending on algorithm.
(do_pubkey_enc): Ditto.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Use
gpg_mpi_write_nohdr.
* g10/export.c (transfer_format_to_openpgp):
* g10/keygen.c (ecckey_from_sexp): Return the error.
(gen_ecc): Repalce arg NBITS by CURVE.
(read_parameter_file): Add keywords "Key-Curve" and "Subkey-Curve".
(ask_curve): New.
(generate_keypair, generate_subkeypair): Use ask_curve.
(do_generate_keypair): Also pass curve name.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Print
curve name.
* g10/parse-packet.c (mpi_read): Remove workaround for
Libcgrypt < 1.5.
(parse_key): Fix ECC case. Print the curve name.
* g10/pkglue.c (mpi_from_sexp): Rename to get_mpi_from_sexp.
(pk_verify, pk_check_secret_key): Add special case for Ed25519.
* g10/seskey.c (encode_md_value): Ditto.
* g10/sign.c (do_sign, hash_for, sign_file): Ditto.
--
Be warned that this code is subject to further changes and that the
format will very likely change before a release. There are also known
bugs and missing code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/iobuf.c (MAX_NESTING_FILTER): New.
(iobuf_push_filter2): Limit the nesting level.
* g10/mainproc.c (mainproc_context): New field ANY. Change HAVE_DATA
and ANY_SIG_SIGN to bit fields of ANY. Add bit field
UNCOMPRESS_FAILED.
(proc_compressed): Avoid printing multiple Bad Data messages.
(check_nesting): Return GPG_ERR_BAD_DATA instead of UNEXPECTED_DATA.
--
This is a more general fix for the nested compression packet bug. In
particular this helps g10/import.c:read_block to stop pushing
compression filters onto an iobuf stream. This patch also reduces the
number of error messages for the non-import case.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 35e40e2d51)
Resolved conflicts:
common/iobuf.c
g10/mainproc.c
* common/homedir.c (w32_bin_is_bin, w32_portable_app) [W32]: New.
(check_portable_app) [W32]: New.
(standard_homedir, default_homedir) [W32]: Support the portable flag.
(w32_rootdir, w32_commondir) [W32]: Ditto.
(gnupg_bindir, gnupg_cachedir, dirmngr_socket_name) [W32]: Ditto.
* common/logging.h (JNLIB_LOG_NO_REGISTRY): New.
* common/logging.c (no_registry): New variable.
(log_set_prefix, log_get_prefix): Set/get that variable.
(do_logv): Do not check the registry if that variable is set.
--
Beware: This code has not been tested because it is not yet possible
to build GnuPG 2.1 for Windows. However, the code will be the base
for an implementation in 2.0.
A portable use of GnuPG under Windows means that GnuPG uses a home
directory depending on the location of the actual binary. No registry
variables are considered. The portable mode is enabled if in the
installation directory of the the binary "gpgconf.exe" and a
file "gpgconf.ctl" are found. The latter file is empty or consists
only of empty or '#' comment lines.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/init.c (mem_cleanup_item_t): New.
(run_mem_cleanup): New.
(_init_common_subsystems): Add an atexit for it.
(register_mem_cleanup_func): New.
* g10/kbnode.c (cleanup_registered): New.
(release_unused_nodes): New.
(alloc_node): Call register_mem_cleanup_func.
--
It is often time consuming to figure out whether still allocated
memory at process termination is fine (e.g. a cache) or a problem. To
help for that register_mem_cleanup_func may now be used to cleanup
such memory. The run time of the program will be longer; if that
turns out to be a problem we can change the code to only run in
debugging mode.
* common/agent-opt.c: New.
* common/shareddefs.h: New.
* common/Makefile.am: Add new files.
* agent/agent.h: Include shareddefs.h.
(pinentry_mode_t): Factor out to shareddefs.h.
* agent/command.c (option_handler): Use parse_pinentry_mode.
* common/iobuf.c (iobuf_seek): Fix for temp streams.
* g10/pubkey-enc.c (get_session_key, get_it): Add some log_clock calls.
* g10/keydb.c (dump_search_desc): New.
(enum_keyblock_states, struct keyblock_cache): New.
(keyblock_cache_clear): New.
(keydb_get_keyblock, keydb_search): Implement a keyblock cache.
(keydb_update_keyblock, keydb_insert_keyblock, keydb_delete_keyblock)
(keydb_rebuild_caches, keydb_search_reset): Clear the cache.
--
Gpg uses the key database at several places without a central
coordination. This leads to several scans of the keybox for the same
key. To improve that we now use a simple cache to store a retrieved
keyblock in certain cases. In theory this caching could also be done
for old keyrings, but it is a bit more work and questionable whether
it is needed; the keybox scheme is anyway much faster than keyrings.
Using a keybox with 20000 384 bit ECDSA/ECHD keypairs and a 252 byte
sample text we get these values for encrypt and decrypt operations on
an Core i5 4*3.33Ghz system. The option --trust-model=always is used.
Times are given in milliseconds wall time.
| | enc | dec | dec,q |
|-----------+-----+-----+-------|
| key 1 | 48 | 96 | 70 |
| key 10000 | 60 | 98 | 80 |
| key 20000 | 69 | 106 | 88 |
| 10 keys | 540 | 290 | 70 |
The 10 keys test uses a mix of keys, the first one is used for
decryption but all keys are looked up so that information about are
printed. The last column gives decryption results w/o information
printing (--quiet).
The keybox is always scanned sequentially without using any index. By
adding an index to the keybox it will be possible to further reduce
the time required for keys stored to the end of the file.
* common/logging.c (log_clock): New.
* g10/gpg.c (set_debug): Print clock debug flag.
* g10/options.h (DBG_CLOCK_VALUE, DBG_CLOCK): New.
--
To actually use log_clock you need to enable the code in
logginc.c:log_check() and link against librt. --debug 4096 may then
be used to enable it at runtime.
* common/argparse.c (iio_item_def_s, IIO_ITEM_DEF): New.
(initialize): Init field IIO_LIST.
(ignore_invalid_option_p): New.
(ignore_invalid_option_add): New.
(ignore_invalid_option_clear): New.
(optfile_parse): Implement meta option.
--
This option is currently of no use. However, as soon as it has been
deployed in all stable versions of GnuPG, it will allow the use of the
same configuration file with an old and a new version of GnuPG. For
example: If a new version implements the option "foobar", and a user
uses it in gpg.conf, an old version of gpg would bail out with the
error "invalid option". To avoid that the following line can be put
above that option in gpg.conf
ignore-invalid-option foobar
This meta option may be given several times or several option names
may be given as arguments (space delimited). Note that this option is
not available on the command line.
* common/utf8conv.c [HAVE_ANDROID_SYSTEM]: Do not include iconv.h.
(iconv_open, iconv_close, load_libiconv) [HAVE_ANDROID_SYSTEM]: New
dummy functions.
(set_native_charset) [HAVE_ANDROID_SYSTEM]: Force use of "utf-8".
(jnlib_iconv_open) [HAVE_ANDROID_SYSTEM]: Act the same as under W32.
(jnlib_iconv) [HAVE_ANDROID_SYSTEM]: Ditto.
(jnlib_iconv_close) [HAVE_ANDROID_SYSTEM]: Ditto.
--
Co-authored-by: Hans of Guardian <hans@guardianproject.info>
* agent/command-ssh.c (SPEC_FLAG_IS_ECDSA): New.
(struct ssh_key_type_spec): Add fields CURVE_NAME and HASH_ALGO.
(ssh_key_types): Add types ecdsa-sha2-nistp{256,384,521}.
(ssh_signature_encoder_t): Add arg spec and adjust all callers.
(ssh_signature_encoder_ecdsa): New.
(sexp_key_construct, sexp_key_extract, ssh_receive_key)
(ssh_convert_key_to_blob): Support ecdsa.
(ssh_identifier_from_curve_name): New.
(ssh_send_key_public): Retrieve and pass the curve_name.
(key_secret_to_public): Ditto.
(data_sign): Add arg SPEC and change callers to pass it.
(ssh_handler_sign_request): Get the hash algo from SPEC.
* common/ssh-utils.c (get_fingerprint): Support ecdsa.
* agent/protect.c (protect_info): Add flag ECC_HACK.
(agent_protect): Allow the use of the "curve" parameter.
* agent/t-protect.c (test_agent_protect): Add a test case for ecdsa.
* agent/command-ssh.c (ssh_key_grip): Print a better error code.
--
The 3 standard curves are now supported in gpg-agent's ssh-agent
protocol implementation. I tested this with all 3 curves and keys
generated by OpenSSH 5.9p1.
Using existing non-ssh generated keys will likely fail for now. To fix
this, the code should first undergo some more cleanup; then the fixes
are pretty straightforward. And yes, the data structures are way too
complicated.
* configure.ac (HAVE_BROKEN_TTYNAME): New ac_define set for Android
systems.
* common/util.h (gnupg_ttyname): New macro. Change all callers of
ttyname to use this macro instead.
(ttyname) [W32]: Rename to _gnupg_ttyname and use also if
HAVE_BROKEN_TTYNAME is defined.
* common/simple-pwquery.c (agent_send_all_options): Keep on using
ttyname unless HAVE_BROKEN_TTYNAME is set. This is because this file
may be used standalone.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
* g10/keygen.c (keygen_set_std_prefs): Include IDEA only in PGP2
compatibility mode.
* g10/misc.c (idea_cipher_warn): Remove. Also remove all callers.
* common/status.h (STATUS_RSA_OR_IDEA): Remove. Do not emit this
status anymore.
--
To keep the number of actually used algorithms low, we want to support
IDEA only in a basically read-only way (unless --pgp2 is used during
key generation). It does not make sense to suggest the use of this
old 64 bit blocksize algorithm. However, there is old data available
where it might be helpful to have IDEA available.
* common/Makefile.am (CLEANFILES): Rename to MAINTAINERCLEANFILES.
--
In general this is not required because automake does this for files
in BUILT_SOURCES anyway. However, having them in CLEANFILES is wrong.
This is bug#1398.
GnuPG requires that options are given before other arguments. This
can sometimes be confusing. We now print a warning if we found an
argument looking alike a long option without being preceded by the
stop option. This is bug#1343.
* common/argparse.h (ARGPARSE_FLAG_STOP_SEEN): New.
* common/argparse.c (arg_parse): Set new flag.
* g10/gpg.c (main): Print the warning.
* agent/gpg-agent.c (main): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
* g13/g13.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
For the shared code parts it is cumbersome to pass an error sourse
variable to each function. Its value is always a constant for a given
binary and thus a global variable makes things a lot easier than the
former macro stuff.
* common/init.c (default_errsource): New global var.
(init_common_subsystems): Rename to _init_common_subsystems. Set
DEFAULT_ERRSOURCE.
* common/init.h: Assert value of GPG_ERR_SOURCE_DEFAULT.
(init_common_subsystems): New macro.
* common/util.h (default_errsource): Add declaration.
* kbx/keybox-defs.h: Add some GPG_ERR_SOURCE_DEFAULT trickery.
* common/estream-printf.c (_ESTREAM_PRINTF_MALLOC): Remove.
(_ESTREAM_PRINTF_FREE): Remove.
(_ESTREAM_PRINTF_REALLOC): New.
(fixed_realloc) [!_ESTREAM_PRINTF_REALLOC]): New.
(estream_vasprintf): Use my_printf_realloc instead of my_printf_malloc
and my_printf_free.
(dynamic_buffer_out): Use my_printf_realloc instead of realloc.
--
This bug will never happen in current GnuPG/Libgcrypt because we use
the standard memory allocation functions via Libgcrypt. However, when
used in other environments it would mess up the heap for an asprintf
with an output length larger than ~512 bytes.
This change might help to c+p a fingerprint from an HTML page without
being enclosed in a "pre" tag.
* common/userids.c (classify_user_id): Skip a second blank in the
middle of a fingerprint.
* common/dotlock.c (use_hardlinks_p, dotlock_take_unix): Check return
value of link().
* g13/g13.c: Make sure err is initialized.
* scd/scdaemon.c (main) [!USE_GCRY_THREAD_CBS]: Do not define ERR.
* scd/scdaemon.c (oDebugAssuanLogCats): New.
(opts): Add option --debug-assuan-log-cats.
(main): Implement option.
* common/asshelp.c (set_libassuan_log_cats): New.
--
The old way of setting the logging categories with an environment
variable is awkward if sdaemon is spawned from a running gpg-agent.
* scripts/gitlog-to-changelog: New script. Taken from gnulib.
* scripts/git-log-fix: New file.
* scripts/git-log-footer: New file.
* doc/HACKING: Describe the ChangeLog policy
* ChangeLog: New file.
* Makefile.am (EXTRA_DIST): Add new files.
(gen-ChangeLog): New.
(dist-hook): Run gen-ChangeLog.
Rename all ChangeLog files to ChangeLog-2011.
* common/dns-cert.c: Remove iobuf.h.
(get_dns_cert): Rename to _get_dns_cert. Remove MAX_SIZE arg. Change
iobuf arg to a estream-t. Rewrite function to make use of estream
instead of iobuf. Require all parameters. Return an gpg_error_t
error instead of the type. Add arg ERRSOURCE.
* common/dns-cert.h (get_dns_cert): New macro to pass the error source
to _gpg_dns_cert.
* common/t-dns-cert.c (main): Adjust for changes in get_dns_cert.
* g10/keyserver.c (keyserver_import_cert): Ditto.
* doc/gpg.texi (GPG Configuration Options): Remove max-cert-size.
- It is now more portable and may be used outside of GnuPG
- vfat file systems are now supported.
- The use of link(2) is more robust.
- Wrote extensive documentation.
Since 2009-12-08 gpg was not able to find email addresses indicated
by a leading '<'. This happened when I merged the user id
classification code of gpgsm and gpg.
To better cope with round robin pooled A records like keys.gnupg.net
we need to keep some information on unresponsive hosts etc. What we
do now is to resolve the hostnames, remember them and select a random
one. If a host is dead it will be marked and a different one
selected. This is intended to solve the problem of long timeouts due
to unresponsive hosts.
The code is not yet finished but selection works.
The basic network code from http.c is used for finger. This keeps the
network related code at one place and we are able to use the somewhat
matured code form http.c. Unfortunately I had to enhance the http
code for more robustness and probably introduced new bugs.
Test this code using
gpg --fetch-key finger:wk@g10code.com
(I might be the last user of finger ;-)
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
DECRYPTION_INFO <mdc_method> <sym_algo>
Print information about the symmetric encryption algorithm and
the MDC method. This will be emitted even if the decryption
fails.
Wrote the ChangeLog 2011-01-13 entry for Andrey's orginal work modulo
the cleanups I did in the last week. Adjusted my own ChangeLog
entries to be consistent with that entry.
Nuked quite some trailing spaces; again sorry for that, I will better
take care of not saving them in the future. "git diff -b" is useful
to read the actual changes ;-).
The ECC-INTEGRATION-2-1 branch can be closed now.
Import and export of secret keys does now work. Encryption has been
fixed to be compatible with the sample messages.
This version tests for new Libgcrypt function and thus needs to be
build with a new Libgcrypt installed.
Changed order of some conditional to make to put the special case into
the true branch. Indentation changes. Minor other changes to make the
ECC code more similar to the rest of our code.
It builds but many sefltests still fail. Need to fix that before
using it with an ECDH enabled libgcrypt.
[/]
2011-01-21 Werner Koch <wk@g10code.com>
* configure.ac: Need Libgcrypt 1.4.6 due to AESWRAP.
(HAVE_GCRY_PK_ECDH): Add new test.
[agent/]
2011-01-21 Werner Koch <wk@g10code.com>
* cvt-openpgp.c (GCRY_PK_ECDH) [!HAVE_GCRY_PK_ECDH]: New.
[include/]
2011-01-21 Werner Koch <wk@g10code.com>
* cipher.h (GCRY_PK_USAGE_CERT): Remove compatibility macros
because we now require libgcrypt 1.4.6.
(GCRY_PK_ECDH): Add replacement.
The following works:
gpg2 --gen-key (ECC)
gpg2 --list-keys
gpg2 --list-packets ~/.gnupg/pubring.gpg
gpg2 --list-packets <private key from http://sites.google.com/site/brainhub/pgpecckeys>
ECDH doesn't work yet as the code must be re-written to adjust for gpg-agent refactoring.
2010-04-20 Marcus Brinkmann <marcus@g10code.de>
* logging.c (do_log_ignore_arg): New helper function.
(log_string): Use it to remove ugly volatile hack that causes gcc
warning.
(log_flush): Likewise.
* sysutils.c (gnupg_unsetenv) [!HAVE_W32CE_SYSTEM]: Return something.
(gnupg_setenv) [!HAVE_W32CE_SYSTEM]: Likewise.
* pka.c (get_pka_info): Solve strict aliasing rule violation.
* t-exechelp.c (test_close_all_fds): Use dummy variables to
silence gcc warning.
kbx/
2010-04-20 Marcus Brinkmann <marcus@g10code.de>
* keybox-update.c [!HAVE_DOSISH_SYSTEM]: Include
../common/sysutils.h even then to silence gcc warning about
missing declaration of gnupg_remove.
tools/
2010-04-20 Marcus Brinkmann <marcus@g10code.de>
* gpgconf-comp.c (option_check_validity): Use dummy variables to
silence gcc warning.
* asshelp.c (start_new_gpg_agent) [HAVE_W32_SYSTEM]: Add missing
argument in assuan_socket_connect invocation.
* iobuf.c (iobuf_open_fd_or_name): Fix type of FD in function
declaration.
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* call-pinentry.c (start_pinentry): Call assuan_pipe_connect, not
assuan_pipe_connect_ext.
* command.c (start_command_handler): Change
assuan_init_socket_server_ext into assuan_init_socket_server.
* call-scd.c (start_scd): Update use of assuan_socket_connect and
assuan_pipe_connect.
* gpg-agent.c (check_own_socket_thread, check_for_running_agent):
Update use of assuan_socket_connect.
common/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Update use of
assuan_socket_connect and assuan_pipe_connect.
scd/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* command.c (scd_command_handler): Call assuan_init_socket_server,
not assuan_init_socket_server_ext.
sm/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* call-dirmngr.c (start_dirmngr_ext): Update use of
assuan_pipe_connect and assuan_socket_connect.
tools/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (start_agent): Update use of
assuan_socket_connect and assuan_pipe_connect.
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* command.c (reset_notify): Take LINE arg and return error.
(register_commands): Use assuan_handler_t type.
common/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* get-passphrase.c (default_inq_cb, membuf_data_cb): Change return
type to gpg_error_t.
g10/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* server.c (reset_notify, input_notify, output_notify): Update to
new assuan interface.
(register_commands): Use assuan_handler_t.
scd/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* command.c (reset_notify): Take LINE arg and return error.
(register_commands): Use assuan_handler_t type.
sm/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* server.c (reset_notify, input_notify, output_notify): Update to
new assuan interface.
(register_commands): Use assuan_handler_t.
* call-agent.c (membuf_data_cb, default_inq_cb)
(inq_ciphertext_cb, scd_serialno_status_cb)
(scd_keypairinfo_status_cb, istrusted_status_cb)
(learn_status_cb, learn_cb, keyinfo_status_cb): Return gpg_error_t.
* configure.ac (NEED_LIBASSUAN_API, NEED_LIBASSUAN_VERSION):
Update to new API (2, 1.1.0).
agent/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-agent.c (parse_rereadable_options): Don't set global assuan
log file (there ain't one anymore).
(main): Update to new API.
(check_own_socket_pid_cb): Return gpg_error_t instead of int.
(check_own_socket_thread, check_for_running_agent): Create assuan
context before connecting to server.
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(write_and_clear_outbuf): Use gpg_error_t instead of
assuan_error_t.
(cmd_geteventcounter, cmd_istrusted, cmd_listtrusted)
(cmd_marktrusted, cmd_havekey, cmd_sigkey, cmd_setkeydesc)
(cmd_sethash, cmd_pksign, cmd_pkdecrypt, cmd_genkey, cmd_readkey)
(cmd_keyinfo, cmd_get_passphrase, cmd_clear_passphrase)
(cmd_get_confirmation, cmd_learn, cmd_passwd)
(cmd_preset_passphrase, cmd_scd, cmd_getval, cmd_putval)
(cmd_updatestartuptty, cmd_killagent, cmd_reloadagent)
(cmd_getinfo, option_handler): Return gpg_error_t instead of int.
(post_cmd_notify): Change type of ERR to gpg_error_t from int.
(io_monitor): Add hook argument. Use symbols for constants.
(register_commands): Change return type of HANDLER to gpg_error_t.
(start_command_handler): Allocate assuan context before starting
server.
* call-pinentry.c: Include "scdaemon.h" before <assuan.h> because
of GPG_ERR_SOURCE_DEFAULT check.
(unlock_pinentry): Call assuan_release instead of
assuan_disconnect.
(getinfo_pid_cb, getpin_cb): Return gpg_error_t instead of int.
(start_pinentry): Allocate assuan context before connecting to
server.
* call-scd.c (membuf_data_cb, learn_status_cb, get_serialno_cb)
(membuf_data_cb, inq_needpin, card_getattr_cb, pass_status_thru)
(pass_data_thru): Change return type to gpg_error_t.
(start_scd): Allocate assuan context before connecting to server.
common/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Allocate assuan context before
starting server.
g10/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* call-agent.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(learn_status_cb, dummy_data_cb, get_serialno_cb, default_inq_cb)
(learn_status_cb, inq_writecert_parms, inq_writekey_parms)
(scd_genkey_cb, membuf_data_cb): Return gpg_error_t instead of
int.
* gpg.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(main): Update to new Assuan API.
* server.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, do_listkeys, cmd_listkeys)
(cmd_listsecretkeys, cmd_genkey, cmd_getinfo): Return gpg_error_t
instead of int.
(register_commands): Allocate assuan context before starting
server.
(gpg_server): Allocate assuan_context before starting server.
scd/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, open_card, cmd_serialno, cmd_lean, cmd_readcert)
(cmd_readkey, cmd_setdata, cmd_pksign, cmd_pkauth, cmd_pkdecrypt)
(cmd_getattr, cmd_setattr, cmd_writecert, cmd_writekey)
(cmd_genkey, cmd_random, cmd_passwd, cmd_checkpin, cmd_lock)
(cmd_unlock, cmd_getinfo, cmd_restart, cmd_disconnect, cmd_apdu)
(cmd_killscd): Return gpg_error_t instead of int.
(scd_command_handler): Allocate assuan context before starting server.
* scdaemon.c (main): Update to new Assuan API.
sm/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpgsm.c (main): Update to new assuan API.
* server.c: Include "gpgsm.h" before <assuan.h> due to check for
GPG_ERR_SOURCE_DEFAULT and assuan.h now including gpg-error.h.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, cmd_listkeys, cmd_dumpkeys)
(cmd_listsecretkeys, cmd_dumpsecretkeys, cmd_genkey)
(cmd_getauditlog, cmd_getinfo): Return gpg_error_t instead of int.
(register_commands): Same for member HANDLER in table.
(gpgsm_server): Allocate assuan context before starting server.
* sm/call-dirmngr.c:
* call-dirmngr.c (prepare_dirmngr): Check for CTX and error before
setting LDAPSERVER.
(start_dirmngr_ext): Allocate assuan context before starting
server.
(inq_certificate, isvalid_status_cb, lookup_cb, lookup_status_cb)
(run_command_cb, run_command_inq_cb, run_command_status_cb):
Return gpg_error_t instead of int.
tools/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (getinfo_pid_cb, read_and_print_response)
(main): Update to new Assuan API.
sufficient to turn the feature on. (http_open): From here.
(http_document): And here.
* gpgkeys_hkp.c (srv_replace): New function to transform a SRV
hostname to a real hostname. (main): Call it from here for the
HAVE_LIBCURL case (without libcurl is handled via the curl-shim).
* curl-shim.h, curl-shim.c (curl_easy_setopt, curl_easy_perform): Add
a CURLOPT_SRVTAG_GPG_HACK (passed through the the http engine).
* sysutils.h (translate_table_init, translate_table_lookup): New
prototypes.
* sysutils.c: Include <ctype.h>.
(FD_TRANSLATE_MAX): New macro.
(fd_translate, fd_translate_len): New static variables.
(translate_table_init, translate_table_lookup): New functions.
(translate_sys2libc_fd_int): Translate file descriptor.
* iobuf.c (check_special_filename): Translate handle values from
special filenames.
* http.c (do_parse_uri): Remove the hkp port 11371 detection. We
implement hkp in the keyserver handler, and the support here makes it
appear like a bad hkp request actually succeeded.
g10/
* passphrase.c (passphrase_get): Set the cancel flag on all error
from the agent. Fixes a bug reported by Tom Duerbusch.
sm/
* gpgsm.c (main): Let --gen-key print a more informative error
message.
* protect-tool.c (get_passphrase): New arg OPT_CHECK.
(get_new_passphrase): Enable OTP_CHECK on the first call.
* command.c (cmd_get_passphrase): Implement option --check.
* gpg-agent.c (MIN_PASSPHRASE_LEN): New
(parse_rereadable_options): New option --min-passphrase-len.
* genkey.c (check_passphrase_constraints): New.
(agent_genkey, agent_protect_and_store): Call new function. Fix
memory leak.
* call-pinentry.c (agent_askpin): Allow translation of the displayed
error message.
(agent_popup_message_start): Remove arg CANCEL_BTN.
(popup_message_thread): Use --one-button option.
* command.c (cmd_passwd): Now that we don't distinguish between
assuan and regular error codes we can jump to the end on error.
common/
* simple-pwquery.c (simple_pwquery): New arg OPT_CHECK.
char * vs. unsigned char * warnings. The GNU coding standards used to
say that these mismatches are okay and better than a bunch of casts.
Obviously this has changed now.
* gpg-agent.c: New option --write-env-file.
* gpg-agent.c (handle_connections): Make sure that the signals we
are handling are not blocked.Block signals while creating new
threads.
* estream.c: Use HAVE_CONFIG_H and not USE_CONFIG_H!
(es_func_fd_read, es_func_fd_write): Protect against EINTR.
* gpg-agent.texi (Agent UPDATESTARTUPTTY): New.
* scdaemon.c (handle_connections): Make sure that the signals we
are handling are not blocked.Block signals while creating new
threads.
(handle_connections): Include the file descriptor into the name of
the thread.
* dynload.h: s/__inline__/inline/.
* tlv.c [GNUPG_MAJOR_VERSION==1]: Define constants instead of
including a gnupg 1.4 header.
* watchgnupg.c: Make sure that PF_LCOAL and AF_LOCAL are defines.
Noted by Ray Link.
sm/
* call-dirmngr.c (inq_certificate): Add new inquire SENDCERT_SKI.
* certlist.c (gpgsm_find_cert): Add new arg KEYID and implement
this filter. Changed all callers.
* certchain.c (find_up_search_by_keyid): New helper.
(find_up): Also try using the AKI.keyIdentifier.
(find_up_external): Ditto.
%0A may pass through.
* agent.h (server_control_s): New field USE_AUTH_CALL.
* call-scd.c (agent_card_pksign): Make use of it.
* command-ssh.c (data_sign): Set the flag.
(ssh_send_key_public): New arg OVERRIDE_COMMENT.
(card_key_available): Add new arg CARDSN.
(ssh_handler_request_identities): Use the card s/n as comment.
(sexp_key_extract): Use GCRYMPI_FMT_STD.
(data_sign): Ditto.
* learncard.c (make_shadow_info): Moved to ..
* protect.c (make_shadow_info): .. here. Return NULL on malloc
failure. Made global.
* agent.h: Add prototype.
* xasprintf.c (xtryasprintf): New.
* app-openpgp.c (get_public_key): Make sure not to return negative
numbers.
(do_sign): Allow passing of indata with algorithm prefix.
(do_auth): Allow OPENPGP.3 as an alternative ID.
* app.c (app_getattr): Return just the S/N but not the timestamp.
* no-libgcrypt.c (gcry_strdup): New.
select returns with -1.
* tools.texi (gpg-connect-agent): New.
* app-openpgp.c (get_one_do): Never try to get a non cacheable
object from the cache.
(get_one_do): Add new arg to return an error code. Changed all
callers.
(do_getattr): Let it return a proper error code.
* app.c (select_application): Return an error code and the
application context in an new arg.
* command.c (open_card): Adjusted for that. Don't use the
fallback if no card is present. Return an error if the card has
been removed without a reset.
(do_reset, cmd_serialno): Clear that error flag.
(TEST_CARD_REMOVAL): New. Use it with all command handlers.
* scdaemon.c (ticker_thread): Termintate if a shutdown is pending.
* apdu.c: Added some PCSC error codes.
(pcsc_error_to_sw): New.
(reset_pcsc_reader, pcsc_get_status, pcsc_send_apdu)
(open_pcsc_reader): Do proper error code mapping.
* gpg-connect-agent.c: New.
* Makefile.am: Add it.
1.9.
* agent.h (agent_exit): Add JNLIB_GCC_A_NR to indicate that this
function won't return.
* gpg-agent.c (check_for_running_agent): Initialize pid to a
default value if not needed.
* command-ssh.c: Removed stdint.h. s/byte_t/unsigned char/,
s/uint32/u32/ becuase that is what we have always used in GnuPG.
(ssh_request_specs): Moved to top of file.
(ssh_key_types): Ditto.
(make_cstring): Ditto.
(data_sign): Don't use a variable for the passphrase prompt, make
it translatable.
(ssh_request_process):
* findkey.c (modify_description): Renamed arguments for clarity,
polished documentation. Make comment a C-string. Fixed case of
DESCRIPTION being just "%".
(agent_key_from_file): Make sure comment string to a C-string.
* gpg-agent.c (create_socket_name): Cleanup the implemntation, use
DIMof, agent_exit, removed superflous args and return the
allocated string as value. Documented. Changed callers.
(create_server_socket): Cleanups similar to above. Changed callers.
(cleanup_do): Renamed to ..
(remove_socket): .. this. Changed caller.
(handle_connections): The signals are to be handled in the select
and not in the accept. Test all FDs after returning from a
select. Remove the event tests from the accept calls. The select
already assured that the accept won't block.
* Makefile.am (gpg_preset_passphrase_LDADD): Reorder libs so that
pwquery may use stuff from jnlib. Conditionally add -lwsock2
(gpg_protect_tool_LDADD): Ditto.
* preset-passphrase.c (main): Use default_homedir().
(main) [W32]: Initialize sockets.
* simple-pwquery.c (agent_open) [W32]: Implement for W32.
(readline) [W32]: Use recv instead of read.
(writen) [W32]: Use send instead of write.
(my_stpcpy): Define a stpcpy replacement so that this file
continues to be self-contained.
(agent_send_all_options) [W32]: Don't call ttyname.
* gnupg-badge-openpgp.eps, gnupg-badge-openpgp.jpg: New
* gnupg.texi: Add a logo.
* sysnotes.texi: New.
* gpgsm.c (main): Use default_homedir().
(main) [W32]: Default to disabled CRL checks.
* gpgconf-comp.c (get_config_pathname) [DOSISH]: Detect absolute
pathnames with a drive letter.
directories default to c:/gnupg. Require libassuan 0.6.9.
* gpg-agent.c (main) [W32]: Now that Mutexes work we can remove
the pth_init kludge.
(main): Add new options --[no-]use-standard-socket.
(check_for_running_agent): Check whether it is running on the
standard socket.
* sysutils.h [W32]: Define sleep.
* util.h: Add prototype for mkdtemp.
* call-agent.c (start_agent): Before starting a pipe server start
to connect to a server on the standard socket. Use PATHSEP
* call-dirmngr.c (start_dirmngr): Use PATHSEP.
* import.c: Include unistd.h for dup and close.
now use the identical implementation from ../common/membuf.c.
* pksign.c (agent_pksign): Changed arg OUTFP to OUTBUF and use
membuf functions to return the value.
* pkdecrypt.c (agent_pkdecrypt): Ditto.
* genkey.c (agent_genkey): Ditto.
* command.c (cmd_pksign, cmd_pkdecrypt, cmd_genkey): Replaced
assuan_get_data_fp() by a the membuf scheme.
(clear_outbuf, write_and_clear_outbuf): New.
* membuf.c (put_membuf): Wipe out buffer after a failed realloc.
* stringhelp.c (w32_strerror) [W32]: New.
* w32-pth.c, w32-pth.h: Added real code written by Timo Schulz.
Not finished, though.
* gpgconf-comp.c <ignore-ocsp-service-url>: Fixed typo.
* w32-pth.c, w32-pth.h: New.
* Makefile.am (gpgsm_LDADD): Put libassuan before jnlib because
under W32 we need the w32 pth code from jnlib.
* misc.c (setup_pinentry_env) [W32]: Disabled.
* gpgsm.c (run_protect_tool) [_WIN32]: Disabled.
* import.c (popen_protect_tool): Simplified by making use of
gnupg_spawn_process.
(parse_p12): Likewise, using gnupg_wait_process.
* export.c (popen_protect_tool): Ditto.
(export_p12): Ditto.
(enable_core_dumps): New.
* gpgsm.texi (Esoteric Options): Add --debug-allow-core-dump.
* gpgsm.c: New option --debug-allow-core-dump.
* gpgsm.h (opt): Add member CONFIG_FILENAME.
* gpgsm.c (main): Use it here instead of the local var.
* server.c (gpgsm_server): Print some additional information with
the hello in verbose mode.
(export_p12_file): Read a certificate from STDIN and pass it to
p12_build. Detect a keygrip and construct the filename in that
case. Unprotcet a key if needed. Print error messages for key
formats we can't handle.
(release_passphrase): New.
(get_passphrase): New arg PROMPTNO. Return the allocated
string. Changed all callers.
* minip12.c: Revamped the build part.
(p12_build): New args CERT and CERTLEN.
* simple-pwquery.c (agent_open): Don't mangle INFOSTR.
* export.c (export_p12, popen_protect_tool)
(gpgsm_p12_export): New.
* gpgsm.c (main): New command --export-secret-key-p12.
* Makefile.am (libcommon_a_SOURCES): Add xasprintf.c.
* miscellaneous.c (xasprintf): Moved to ...
* xasprintf (xasprintf): ... here. New file.
This allows to use xasprintf without sucking in gpg-error.
* vasprintf.c (vasprintf) [va_copy]: Use va_copy.
[!va_copy && __va_copy]: Use __va_copy.
[!va_copy && !__va_copy]: Only now fall back to using memcpy.
* call-scd.c: Seirialized all scdaeom access when using Pth.
* cache.c: Made the cache Pth-thread-safe.
(agent_unlock_cache_entry): New.
* findkey.c (unprotect): Unlock the returned cache value.
* command.c (cmd_get_passphrase): Ditto.
* gpg-agent.c (main): Register pth_read/write with Assuan.
handle certs-only messages.
* maperror.c (map_gcry_err): Add libgcrypt's new S-expression errors.
(map_ksba_err): Add a few mappings.
* configure.ac: We now require libgcrypt 1.1.7 and libksba 0.4.2.
(gpgsm_validate_path): And call it from here.
* gpgsm.c (main): New options --policy-file,
--disable-policy-checks and --enable-policy-checks.
* gpgsm.h (opt): Added policy_file, no_policy_checks.
name identifies a certificate unambiguously.
(gpgsm_find_cert): Ditto.
* server.c (cmd_listkeys): Check that the data stream is available.
(cmd_listsecretkeys): Ditto.
(has_option): New.
(cmd_sign): Fix ambiguousity in option recognition.
* gpgsm.c (main): Enable --logger-fd.
* encrypt.c (gpgsm_encrypt): Increased buffer size for better
performance.
* call-agent.c (gpgsm_agent_pksign): Check the S-Exp received from
the agent.
* keylist.c (list_cert_colon): Filter out control characters.
