* dirmngr/dirmngr.c (oIgnoreCRLExtension): New.
(opts): Add --ignore-crl-extension.
(parse_rereadable_options): Add to list/
* dirmngr/dirmngr.h (opt): Add ignored_crl_extensions.
* dirmngr/crlcache.c (crl_cache_insert): Implement option.
--
This option is is useful for debugging problems with new CRL
extensions. It is similar to --ignore-cert-extension.
GnuPG-bug-id: 6545
* sm/call-dirmngr.c (run_command_inq_cb): Support SENDCERT_SKI.
* dirmngr/crlcache.c (crl_cache_insert): Print the CRL name along with
the unknown OID nortice.
* dirmngr/crlcache.h (CRL_CACHE_NOTTRUSTED): New.
* dirmngr/crlcache.c (cache_isvalid): Set this status.
(crl_cache_cert_isvalid): Map it to GPG_ERR_NOT_TRUSTED.
(crl_cache_reload_crl): Move diagnostic to ...
* dirmngr/crlfetch.c (crl_fetch): here.
* dirmngr/server.c (cmd_isvalid): Map it to GPG_ERR_NOT_TRUSTED.
* dirmngr/validate.c (check_revocations): Handle new status. Improve
diagnostics.
* common/status.c (get_inv_recpsgnr_code): Map INV_CRL_OBJ.
* common/audit.c (proc_type_verify): Ditto.
--
This avoids repeated loading of CRLs in case of untrusted root
certificates.
* dirmngr/crlcache.c (INVCRL_TOO_OLD): New.
(INVCRL_UNKNOWN_EXTN, INVCRL_GENERAL): New.
(open_dir, crl_cache_insert): Use the new constants.
(list_one_crl_entry): Make diagnostics robust for new INVCRL codes.
* dirmngr/crlcache.c (finish_sig_check): Use raw value for the data.
--
This had the usual signed/unsigned problem. By using the modern form
we enforce Libgcrypt internal parsing as unsigned integer.
* dirmngr/crlcache.c (crl_cache_reload_crl): Rework the double loop.
Remove the unused issuername_uri stuff.
--
It is quite common that LDAP servers are blocked and thuis the HTTP
access point should be used instead. This worked well for
certificates where the DP are given in this form:
crlDP: ldap://x500.bund.de/[...]
http://x500.bund.de/[...]
issuer: none
but it failed for this form
crlDP: ldap://x500.bund.de/[...]
issuer: none
crlDP: http://x500.bund.de/[...]
issuer: none
because the LAST_ERR thing terminated the outer loop. This pacth
fixes this and also cleans up the code to be more robust.
Note that the common workaround of using --ignore-ldap-dp will now
only be needed if the firewall uses packet dropping instead of proper
ICMP rejects.
* common/sysutils.h (struct gnupg_dirent_s): New.
* common/sysutils.c: Include dirent.h.
(struct gnupg_dir_s): New.
(gnupg_opendir, gnupg_readdir, gnupg_closedir): New. Change all
callers of opendir, readdir, and closedir to use these functions.
--
GnuPG-bug-id: 5098
* common/sysutils.c (gnupg_stat): New.
* common/sysutils.h: Include sys/stat.h.
--
Yet another wrapper for Unicode support on Windows.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (any8bitchar) [W32]: New.
(gnupg_open): New. Replace most calls to open by this.
* common/iobuf.c (any8bitchar) [W32]: New.
(direct_open) [W32]: Use CreateFileW if needed.
--
This is yet another step for full Unicode support on Windows.
GnuPG-bug-id: 5098
Summary:
* dirmngr/crlcache.c (crl_cache_flush): Also deinit the cache.
* dirmngr/server.c (hlp_flushcrls, cmd_flushcrls): New.
(register_commands): Add FLUSHCRLS.
--
This allows it to flush the CRL cache of a running dirmngr
server. This can be useful to debug / analyze CRL issues.
GnuPG-Bug-Id: T3967
Differential Revision: https://dev.gnupg.org/D469
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
(cherry picked from commit 00321a025f90990a71b60b4689ede1f38fbde347)
* dirmngr/crlcache.c (lock_db_file, crl_cache_insert): Open cache
file in binary mode.
--
CRLs on Windows would have line ending entries converted. This
did not cause problems in a surprising amount of cases but
can lead to unexpected and random parse / read errors. Especially
with large CRLs like cacert.
This bug has been around since 2004.
GnuPG-Bug-Id: T3923
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* common/logging.c: Do not build any code if we can use the gpgrt_log
functions.
(log_logv_with_prefix): Rename to log_logv_prefix and change order of
args so that this function matches its printf like counterpart
gpgrt_logv_prefix. Change all callers.
(log_debug_with_string): Rename to log_debug_string. Change all
callers.
(log_printhex): Move first arg to end so that this function matches
its printf like counterpart gpgrt_log_printhex. Change all callers.
* common/logging.h: Divert to gpgrt/libgpg-error if we can use the
gpgrt_log functions.
(bug_at): Add inline versions if we can use the gpgrt_log functions.
* configure.ac (GPGRT_ENABLE_LOG_MACROS): Add to AH_BOTTOM.
(mycflags): Add -Wno-format-zero-length.
--
This patch enables the use of the log function from libgpgrt (aka
libgpg-error). Instead of checking a version number, we enable them
depending on macros set by recent gpg-error versions. Eventually the
whole divert stuff can be removed.
The -Wno-format-zero-length is required because log_printhex can be
called with an empty format string. Note that this is fully specified
standard C behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/crlcache.c: Clearly document that this fucntions takes
ownership of MD.
(abort_sig_check): Allow NULL for MD.
(crl_parse_insert): Immediately set MD to NULL. Remove check for md
before a calling abort_sig_check.
--
GnuPG-bug-id: 3510
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/validate.h (VALIDATE_FLAG_SYSTRUST): Remove
(VALIDATE_FLAG_EXTRATRUST): Remove
(VALIDATE_FLAG_TRUST_SYSTEM): New.
(VALIDATE_FLAG_TRUST_CONFIG): New.
(VALIDATE_FLAG_TRUST_HKP): New.
(VALIDATE_FLAG_TRUST_HKPSPOOL): New.
(VALIDATE_FLAG_MASK_TRUST): New.
* dirmngr/validate.c (check_header_constants): New.
(validate_cert_chain): Call new function. Simplify call to
is_trusted_cert.
* dirmngr/crlcache.c (crl_parse_insert): Pass
VALIDATE_FLAG_TRUST_CONFIG to validate_cert_chain
* dirmngr/server.c (cmd_validate): Use VALDIATE_FLAG_TRUST_SYSTEM and
VALIDATE_FLAG_TRUST_CONFIG.
* dirmngr/http-ntbtls.c (gnupg_http_tls_verify_cb): Check provided TLS
context. Set trustclass flags using the new VALIDATE_FLAG_TRUST
values.
* dirmngr/certcache.c (cert_cache_init): Load the standard pool
certificate prior to the --hkp-cacerts.
--
Note that this changes the way the standard cert is used: We require
that it is installed at /usr/share/gnupg and we do not allow to change
it. If this is not desired, the the standard cert can be removed or
replaced by a newer one.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/crlcache.c (crl_cache_load): Open file in binary mode.
--
This fixes conversion bugs with binary CRL's on Windows.
GnuPG-bug-id: issue2448
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* dirmngr/dirmngr.h (opts): Remove fields 'system_service' and
'system_daemon'.
* common/homedir.c (dirmngr_sys_socket_name): Remove.
(dirmngr_user_socket_name): Rename to ...
(dirmngr_socket_name): this. Change call callers.
* common/asshelp.c (start_new_dirmngr): Remove the system socket
feature.
* tools/gpgconf.c (list_dirs): Do not print "dirmngr-sys-socket".
* sm/server.c (gpgsm_server): Adjust for removed system socket feature.
* dirmngr/server.c (cmd_getinfo): Ditto.
(cmd_killdirmngr): Remove check for system daemon.
(cmd_reloaddirmngr): Ditto.
* dirmngr/dirmngr.c (USE_W32_SERVICE): Remove macro.
(aService): Remove.
(opts): Remove --service.
(w32_service_control): Remove.
(real_main, call_real_main) [W32]: Remove wrapper.
(main): Remove Windows system service feature. Remove system dameon
feature. Use only the "~/.gnupg/dirmngr_ldapservers.conf" file.
* dirmngr/certcache.c (load_certs_from_dir): Remove warning in the
system dameon case.
* dirmngr/crlcache.c (DBDIR_D): Always use "~/.gnupg/crls.d".
* dirmngr/ocsp.c (validate_responder_cert): Do not call
validate_cert_chain which was used only in system daemon mode.
* dirmngr/validate.c (validate_cert_chain): Always use the code.
--
We are now starting dirmngr as needed as a user daemon. The
deprecated system daemon mode does not anymore make sense. In case a
system wide daemon is required, it is better to setup a dedicated
account to run dirmngr and tweak socket permissions accordingly.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/crlcache.c (list_one_crl_entry): Spell superseded correctly.
* dirmngr/ocsp.c (ocsp_invalid): Likewise.
This might break some tools which parse the existing output and expect
misspellings, but i'm not sure there are many such tools, and we
should use standardized orthography going forward.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* dirmngr/misc.c (hexify_data): Add arg with_prefix. Adjust all
callers.
* dirmngr/crlcache.c (cache_isvalid): Print "0x" in front of the S/N.
--
GnuPG-bug-id: 1147
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/ldap-wrapper.c (ldap_wrapper_thread): Do not close the
stdout reader after EOF from read_log_data.
* dirmngr/crlcache.c (crl_cache_reload_crl): Close the reader before
the next iteration.
--
I assumed that the log_fd also has a reader object but that reader
object is used for stdout and needs to be closed by the consumer.
The real bug with the non-released ldap_wrapper control objects was
that when looping over distribution points we did not closed the used
reader object before the next iteration. Now, the test case had more
than one DP and thus we lost one reader object.
Signed-off-by: Werner Koch <wk@gnupg.org>
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
