* g10/decrypt.c (decrypt_message_fd): Use INPUT_FD directly.
* g10/encrypt.c (encrypt_crypt): Use FILEFD directly.
--
Before 8402815d, original code was with iobuf_open_fd_or_name, which
used gnupg_fd_t for the file descriptor (FD2INT was relevant at that
time). After the change, because it's not gnupg_fd_t but int, use of
FD2INT is irrelevant.
Fixes-commit: 8402815d8e0e04a44362968f88b3d484d2395402
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/encrypt.c (encrypt_crypt, encrypt_filter): Factor common code
out to ...
(create_dek_with_warnings): new
(check_encryption_compliance): and new.
* g10/encrypt.c (encrypt_filter): Add the compliance check.
--
GnuPG-bug-id: 6174
Ported-from: f88cb12f8e3c1234a094d09e2505d3a3eec4cbfe
* g10/options.h (opt): Add field flags.require_compliance.
* g10/gpg.c (oRequireCompliance): New.
(opts): Add --require-compliance.
(main): Set option.
* g10/mainproc.c (proc_encrypted): Emit error if non de-vs compliant.
(check_sig_and_print): Ditto.
* g10/encrypt.c (encrypt_crypt): Ditto.
--
Note that in the --encrypt and --verify cased other checks may kick in
earlier than this new --require-compliance controlled one.
* g10/keydb.h (GETPASSWORD_FLAG_SYMDECRYPT): New.
(passphrase_to_dek_ext): Remove this obsolete prototype.
* g10/passphrase.c (passphrase_get): Add arg flags. Use new flag
value.
(passphrase_to_dek): Add arg flags and pass it on.
* g10/mainproc.c (proc_symkey_enc): Use new flag.
* sm/decrypt.c (pwri_decrypt): Use "passphrase".
--
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 03f83bcda5d1f8d8246bcc1afc603b7f74d0626b)
Note that we keep on using the term "passphrase" although "password"
would be better. There are however so many occurance of this and
given it is a bike shedding topic we fix that in the PO files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: New option --allow-old-cipher-algos.
(set_compliance_option): Set --rfc4880bis explictly to SHA256 and
AES256. Allow old cipher algos for OpenPGP, rfc4880, and rfc2440.
* g10/options.h (opt): Add flags.allow_old_cipher_algos.
* g10/misc.c (print_sha1_keysig_rejected_note): Always print the note
unless in --quiet mode.
* g10/encrypt.c (setup_symkey): Disallow by default algos with a
blocklengt < 128.
(encrypt_crypt): Ditto. Fallback by default to AES instead of 3DES.
* g10/pkclist.c (algo_available): Take care of old cipher also.
(select_algo_from_prefs): Use AES as implicit algorithm by default.
* tests/openpgp/defs.scm (create-gpghome): Set allow-old-cipher-algos.
--
GnuPG-bug-id: 3415
* g10/gpg.c (set_compliance_option): For AES256 and SHA256 in de-vs
mode.
* g10/encrypt.c (setup_symkey): Add extra compliance check.
(encrypt_simple): Avoid printing a second error oncplinace failure.
--
Because we used the RFC4880 mode as base for the de-vs mode we got
3DES as symmetric encryption algorithm. With the default gnupg mode
that was already used. The new extra compliance checks are added to
detect whether a --personal-cipher-preference or --cipher-algo option
tried to override the algorithms. They are still possible but now
non-compliant algorithms will throw an error.
Manual testing can be done with commands like this:
gpg --no-options --compliance=de-vs \
--personal-cipher-preferences "S1 S7" \
--pinentry-mode loopback -v --passphrase abc -ac </etc/motd
Here the command fails due to IDEA (S1) being the preferred cipher
algorithm. Using "--s2k-digest-algo SHA1" instead of
--personal-cipher-preferences will also fail.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/encrypt.c (setup_symkey): Use default_cipher_algo function
instead of the fallback s2k_cipher_algo. Fix error code.
(encrypt_simple): Use setup_symkey.
--
Aside of removing code duplication this patch fixes the flaw that the
S2K cipher algorithm was used when mixing public key and symmetric
encryption or signatures with symmetric encrypion. The
default_algorithm function should be used here so that the command
line option --cipher-algo and --personal-cipher-preferences have an
effect.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.h (PK_ALGO_FLAG_RSAPSS): New.
* common/compliance.c (gnupg_pk_is_compliant): Add arg alog_flags and
test rsaPSS. Adjust all callers.
(gnupg_pk_is_allowed): Ditto.
* sm/misc.c (gpgsm_ksba_cms_get_sig_val): New wrapper function.
(gpgsm_get_hash_algo_from_sigval): New.
* sm/certcheck.c (gpgsm_check_cms_signature): Change type of sigval
arg. Add arg pkalgoflags. Use the PK_ALGO_FLAG_RSAPSS.
* sm/verify.c (gpgsm_verify): Use the new wrapper and new fucntion to
also get the algo flags. Pass algo flags along.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Make --pgp6 an alias for --pgp7.
* common/compliance.h (gnupg_compliance_mode): Remove CO_PGP6.
* g10/options.h (PGP6): Remove. Adjust all users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Tuen options --force-mdc, --no-force-mdc, --disable-mdc
and --no-disable-mdc into NOPs.
* g10/encrypt.c (use_mdc): Simplify. MDC is now almost always used.
(use_aead): Ignore MDC options. Print warning for missing MDC feature
flags.
* g10/pkclist.c (warn_missing_mdc_from_pklist): Rename to ...
(warn_missing_aead_from_pklist): this and adjust.
--
The MDC is now always used except with --rfc2440 which will lead to a
a big fat warning.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_symkey_enc): Add field aead_algo.
* g10/build-packet.c (do_symkey_enc): Support version 5 packets.
* g10/parse-packet.c (parse_symkeyenc): Ditto.
* g10/encrypt.c (encrypt_symmetric): Force using a random session
key in AEAD mode.
(encrypt_seskey): Add and support arg aead_algo.
(write_symkey_enc): Ditto.
(encrypt_simple): Adjust accordingly.
(encrypt_filter): Ditto.
* g10/gpgcompose.c (sk_esk): For now call encrypt_seskey without AEAD
support.
* g10/mainproc.c (symkey_decrypt_seskey): Support AEAD. Nver call BUG
but return an error.
(proc_symkey_enc): Call symkey_decrypt_seskey in a bug compatible way.
* g10/import.c (check_prefs): Check AEAD preferences.
* g10/keyedit.c (show_prefs): Print AEAD preferences.
--
For easier debugging this patch also changes some diagnostics to also
print the encryption mode with the cipher algorithm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (select_aead_from_pklist): Return the AEAD_algo.
* g10/encrypt.c (use_aead): Return the AEAD algo.
(encrypt_simple): Adjust for this change.
(encrypt_crypt): Ditto.
(encrypt_filter): Ditto.
* g10/sign.c (sign_symencrypt_file): Ditto.
* g10/misc.c (MY_GCRY_CIPHER_MODE_EAX): New.
(openpgp_aead_algo_info): New.
* g10/cipher-aead.c (MY_GCRY_CIPHER_MODE_EAX): Remove.
(write_header): Use new fucntion.
* g10/decrypt-data.c (MY_GCRY_CIPHER_MODE_EAX): Remove.
(decrypt_data): Use new function. Also allow for chunkbytes other
than 10.
--
Note that other chunk bytes than 10 and in particular 0 (64 byte
chunks) have not yet been tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/encrypt.c (encrypt_seskey): Allocate the buffer for the
encrypted key and returns that buffer and its length.
(encrypt_simple): Adjust for above change.
(write_symkey_enc): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgpdefs.h (PKT_ENCRYPTED_AEAD): New const.
* g10/dek.h (DEK): Increase size of use_aead to 4 bits.
* g10/filter.h (cipher_filter_context_t): Add new fields for AEAD.
* g10/packet.h (PKT_encrypted): Add fields aead_algo, cipher_algo, and
chunkbyte.
* g10/build-packet.c (do_encrypted_aead): New.
(build_packet): Call it.
* g10/parse-packet.c (dump_sig_subpkt): Handle SIGSUBPKT_PREF_AEAD.
(parse_one_sig_subpkt, can_handle_critical): Ditto.
(parse_encrypted): Clear new PKT_ENCRYPTED fields.
(parse_encrypted_aead): New.
(parse): Call it.
* g10/gpg.c (main): Take care of --rfc4880bis option when checking
compliance.
* g10/cipher-aead.c: Replace the stub by real code.
* g10/decrypt-data.c (decode_filter_ctx_t): Add fields for use with
AEAD.
(aead_set_nonce): New.
(aead_set_ad): New.
(decrypt_data): Support AEAD.
(aead_underflow): New.
(aead_decode_filter): New.
* g10/encrypt.c (use_aead): Make that new fucntion work.
(encrypt_simple): Use default_aead_algo() instead of EAX.
* g10/mainproc.c (proc_encrypted): Support AEAD.
(do_proc_packets): Support PKT_ENCRYPTED_AEAD.
--
This code has seen only a very few manual tests. Encrypting always
uses a 64k chunks and decryption has not been tested with larger
chunks. Those small chunks make debugging much faster.
Tests can be done using:
gpg --rfc4880bis --pinentry-mode=loopback --passphrase abc \
--force-aead --aead-algo ocb --s2k-mode 0 --cipher AES \
-v -z 0 --status-fd 2 -c <INFILE >OUTFILE
and
gpg --rfc4880bis --pinentry-mode=loopback --passphrase=abc \
--status-fd 2 -v -d <INFILE >OUTFILE
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cipher.c (cipher_filter): Rename to cipher_filter_cfb.
* g10/cipher-aead.c: New. Right now only with a stub function.
* g10/Makefile.am (gpg_sources): Add file.
* g10/encrypt.c (encrypt_simple): Push either cipher_filter_cfb or
cipher_filter_aead.
(encrypt_crypt): Ditto.
(encrypt_filter): Ditto.
* g10/sign.c (sign_symencrypt_file): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/dek.h (DEK): Turn fields use_mdc, algo_printed and symmetric
into single bit vars. Make sure they are always set to 1 or 0.
(DEK): New field use_aead.
* g10/options.h (struct opt): New field force_aead.
* g10/pkclist.c (select_aead_from_pklist): New.
* g10/gpg.c (oForceAEAD): New const.
(opts): New options "--force-aead".
(main): Set new option.
* g10/encrypt.c (use_aead): New.
(encrypt_simple): Implement new flags DEK.use_aead.
(encrypt_crypt): Ditto.
(encrypt_filter): Ditto.
* g10/sign.c (sign_symencrypt_file): Ditto.
--
This patch should be enough to detect whether AEAD can be used.
Not tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/logging.c: Do not build any code if we can use the gpgrt_log
functions.
(log_logv_with_prefix): Rename to log_logv_prefix and change order of
args so that this function matches its printf like counterpart
gpgrt_logv_prefix. Change all callers.
(log_debug_with_string): Rename to log_debug_string. Change all
callers.
(log_printhex): Move first arg to end so that this function matches
its printf like counterpart gpgrt_log_printhex. Change all callers.
* common/logging.h: Divert to gpgrt/libgpg-error if we can use the
gpgrt_log functions.
(bug_at): Add inline versions if we can use the gpgrt_log functions.
* configure.ac (GPGRT_ENABLE_LOG_MACROS): Add to AH_BOTTOM.
(mycflags): Add -Wno-format-zero-length.
--
This patch enables the use of the log function from libgpgrt (aka
libgpg-error). Instead of checking a version number, we enable them
depending on macros set by recent gpg-error versions. Eventually the
whole divert stuff can be removed.
The -Wno-format-zero-length is required because log_printhex can be
called with an empty format string. Note that this is fully specified
standard C behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/main.h (open_outfile): New parameter NO_OUTFILE.
* g10/openfile.c (open_outfile): New parameter NO_OUTFILE. If given,
never use opt.outfile.
* g10/revoke.c (create_revocation): If FILENAME is true, also set
NO_OUTFILE to true (for standard revocation certificates).
* g10/dearmor.c, g10/encrypt.c, g10/export.c, g10/revoke.c,
g10/sign.c: Adjust all other callers.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 3015
* g10/encrypt.c (encrypt_crypt): Do not abort for a non-compliant key.
* sm/encrypt.c (gpgsm_encrypt): Ditto.
--
GnuPG-bug-id: 3306
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (gnupg_rng_is_compliant): New.
* g10/call-agent.c (start_agent) [W32]: Check rng compliance.
* sm/call-agent.c (start_agent) [W32]: Ditto.
* g10/encrypt.c (encrypt_simple, encrypt_crypt): Check that the RNG is
compliant.
* sm/encrypt.c (gpgsm_encrypt): Ditto.
* g10/sign.c (do_sign): Ditto.
* sm/sign.c (gpgsm_sign): Ditto.
--
Under Windows we need to check that the Jitter RNG is active in de-vs
mode. Under Linux this is not necessary because /dev/random can be
scrutinized and is believed to provide enough entropy.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_ENCRYPTION_COMPLIANCE_MODE): New.
* g10/encrypt.c (encrypt_crypt): Emit new status code.
* sm/encrypt.c (gpgsm_encrypt): Ditto.
--
This status code allows to report whether an encryption operation was
compliant to de-vs.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
For proper operations as a server we need to avoid global variables.
Thus we need to pass the session state CTRL to most functions. Quite
a lot of changes but fortunately straightforward to do.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (struct parse_packet_ctx_s): Add fields LAST_PKT and
FREE_LAST_PKT.
(init_parse_packet): Clear them.
(deinit_parse_packet): New macro. Change all users if
init_parse_packet to also call this macro.
* g10/free-packet.c (free_packet): Add arg PARSECTX and handle shallow
packet copies in the context. Change all callers.
* g10/parse-packet.c (parse): Store certain packets in the parse
context.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/passphrase.c (passphrase_get): Remove arg KEYID. Change arg
MODE to NOCACHE.
(passphrase_to_dek): Remove args KEYID and PUBKEY_ALGO. Split arg
MODE into CREATE and NOCACHE. Change all callers and adjust stubs.
(passphrase_clear_cache): Remove args KEYID and ALGO. They are not
used. Change caller.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oMimemode): New.
(opts): Add --mimemode.
(main): Use --mimemode only in rfc4880bis compliance mode.
* g10/options.h (struct opt): Add field "mimemode".
* g10/build-packet.c (do_plaintext): Allow for mode 'm'.
* g10/encrypt.c (encrypt_simple, encrypt_crypt): Use 'm' if requested.
* g10/plaintext.c (handle_plaintext): Handle 'm' mode.
* g10/sign.c (write_plaintext_packet): Handle 'm' mode.
(sign_file, sign_symencrypt_file): Use 'm' if requested.
--
Thsi patch prepares for a proposed change in RFC4880bis to support a
MIME flag. A literal data packet with the mime flag set is handled
like a 't' or 'u' but CR are not removed. The PLAINTEXT status line
will also indicate a MIME content.
If --mimemode is used without --rfc4880bis 't' will be used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h: Include "util.h".
* g10/encrypt.c (encrypt_seskey): Don't mark as static.
* g10/gpgcompose.c: New file.
* g10/Makefile.am (noinst_PROGRAMS): Add gpgcompose.
(gpg2_SOURCES): Split everything but gpg.c into...
(gpg_sources): ... this new variable.
(gpgcompose_SOURCES): New variable.
(gpgcompose_LDADD): Likewise.
(gpgcompose_LDFLAGS): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/encrypt.c (write_pubkey_enc_from_list): Split the body of this
function out into...
(write_pubkey_enc): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/pkclist.c (build_pk_list): Remove parameter use, which is always
called set to PUBKEY_USAGE_ENC. Update callers.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/encrypt.c (use_mdc): Make it a global func.
* g10/sign.c (sign_symencrypt_file): Use that function to decide
whether to use an MDC.
* tests/openpgp/conventional-mdc.test: Add a simple test case.
--
We used --force-mdc in sign+symenc mode (-cs) only with --force-mdc.
That broke our assumption from commit 625e292 (GnuPG 2.1.9) that all
uses of modern ciphers are using MDC.
Reported-by: Ben Kibbey <bjk@luxsci.net>
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/iobuf.h (iobuf_open_fd_or_name): Remove prototype. Replace
use with either iobuf_open or iobuf_fdopen_nc, as appropriate.
* common/iobuf.c (iobuf_open): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
