* scd/iso7816.h (struct pininfo_s): Rename from iso7816_pininfo_s.
Change meaning of MODE.
(pininfo_t): Rename from iso7816_pininfo_t.
* scd/sc-copykeys.c: Include "iso7816.h".
* scd/scdaemon.c, scd/command.c: Likewise.
* scd/ccid-driver.c: Include "scdaemon.h" and "iso7816.h".
(ccid_transceive_secure): Follow the change of PININFO_T.
* scd/app.c: Include "apdu.h" after "iso7816.h".
* scd/iso7816.c (iso7816_check_keypad, iso7816_verify_kp)
(iso7816_change_reference_data_kp): Follow the change of API.
* scd/apdu.c (struct reader_table_s): Change API of CHECK_KEYPAD,
KEYPAD_VERIFY, KEYPAD_MODIFY to have arg of PININFO_T.
(check_pcsc_keypad, check_ccid_keypad): Likewise.
(apdu_check_keypad, apdu_keypad_verify, apdu_keypad_modify): Likewise.
(pcsc_keypad_verify, pcsc_keypad_modify, ct_send_apdu)
(pcsc_send_apdu_direct, pcsc_send_apdu_wrapped, pcsc_send_apdu)
(send_apdu_ccid, ccid_keypad_operation, my_rapdu_send_apdu, send_apdu)
(send_le): Follow the change of API.
* scd/apdu.h (apdu_check_keypad, apdu_keypad_verify)
(apdu_keypad_modify): Change the API.
* scd/app-dinsig.c, scd/app-nks.c, scd/app-openpgp.c: Follow the
change.
* scd/ccid-driver.c (struct ccid_driver_s): Add auto_voltage,
auto_param, and auto_pps.
(parse_ccid_descriptor): Set auto_voltage, auto_param, and auto_pps.
Support non-autoconf readers.
(update_param_by_atr): New.
(ccid_get_atr): Use 5V for PowerOn when auto_voltage is not supported.
Use 0x10 when nonnull_nad for SetParameters.
Call update_param_by_atr for parsing ATR, and use param for
SetParameters.
Send PPS if reader requires it and card is negotiable.
When bNadValue in the return values of SetParameters == 0,
clear handle->nonnull_nad flag.
--
This change is to support more card readers by the internal driver.
Tested with 08e6:3478 Gemplus PinPad Smart Card Reader.
* agent/call-pinentry.c (atfork_cb): Reset signal mask and signal
handler for child process.
(agent_popup_message_stop): Send SIGINT (was: SIGKILL).
--
pinentry-curses should be killed by SIGINT, so that it can reset
terminal settings, but it didn't work.
* g10/keydb.c (KEYDB_RESOURCE_TYPE_KEYBOX): New.
(keydb_add_resource): Handle scheme "gnupg-kbx:". Detect Keybox
magic. Print wanrning note for Keybox.
(keydb_new, keydb_release, keydb_get_resource_name)
(lock_all, unlock_all, keydb_get_keyblock)
(keydb_update_keyblock, keydb_insert_keyblock, keydb_delete_keyblock)
(keydb_locate_writable, keydb_rebuild_caches, keydb_search_reset)
(keydb_search2): Ignore Keybox type in switches.
* g10/gpg.h (G10ERR_UNSUPPORTED): Map to correct gpg-error value.
--
GnuPG 2.1 will support Keybox files in GPG and thus users might see
weird error messages if they accidentally use a keybox file with 2.0.
Better print a note here.
* g10/import.c (valid_keyblock_packet): New.
(read_block): Store only valid packets.
--
A corrupted key, which for example included a mangled public key
encrypted packet, used to corrupt the keyring. This change skips all
packets which are not allowed in a keyblock.
GnuPG-bug-id: 1455
(cherry-picked from commit 3a4b96e665fa639772854058737ee3d54ba0694e)
* jnlib/argparse.c (iio_item_def_s, IIO_ITEM_DEF): New.
(initialize): Init field IIO_LIST.
(ignore_invalid_option_p): New.
(ignore_invalid_option_add): New.
(ignore_invalid_option_clear): New.
(optfile_parse): Implement meta option.
--
This option is currently of no use. However, as soon as it has been
deployed in all stable versions of GnuPG, it will allow the use of the
same configuration file with an old and a new version of GnuPG. For
example: If a new version implements the option "foobar", and a user
uses it in gpg.conf, an old version of gpg would bail out with the
error "invalid option". To avoid that the following line can be put
above that option in gpg.conf
ignore-invalid-option foobar
This meta option may be given several times or several option names
may be given as arguments (space delimited). Note that this option is
not available on the command line.
(cherry-picked from commit 41d564333d35c923f473aa90625d91f8fe18cd0b)
* configure.ac: Check for inet_ntop.
* m4/libcurl.m4: Provide a #define for the version of the curl
library.
* keyserver/gpgkeys_hkp.c (main, srv_replace): Call getaddrinfo() on
each target. Once we find one that resolves to an address (whether
IPv4 or IPv6), pass it into libcurl via CURLOPT_RESOLVE using the
SRV name as the "host". Force the HTTP Host header to be the same.
* common/http.c (send_request, connect_server, http_open): Use a
struct srv instead of a single srvtag so we can pass the chosen host
and port back to the caller.
(connect_server): Use the proper port in the HAVE_GETADDRINFO case.
* keyserver/curl-shim.c (curl_easy_perform): Use struct srv and log
chosen host and port.
* keyserver/gpgkeys_hkp.c (main): Properly take the port given by SRV.
* scd/apdu.c (pcsc_no_service): Remove.
(open_pcsc_reader_direct, open_pcsc_reader_wrapped): Remove
pcsc_no_service support.
(apdu_open_reader): Remove R_NO_SERVICE.
* scd/apdu.h (apdu_open_reader): Remove R_NO_SERVICE.
* scd/command.c (reader_disabled): Remove.
(get_reader_slot): Follow the change of R_NO_SERVICE.
(open_card, cmd_serialno, scd_command_handler): Remove reader_disabled
support.
* scd/sc-copykeys.c (main): Follow the change of R_NO_SERVICE.
--
Daemon should handle all possible cases. Even if such a difficult
case like reader_disabled, it should not exit.
* scd/command.c (update_reader_status_file): Don't call
get_reader_slot.
--
This fix has a impact that the insertion of a card reader will not be
detected upon the insertion, but will be deferred until user tries to
access his card.
* keyserver.c (print_keyrec): Honor --keyid-format when getting back
full fingerprints from the keyserver (the comment in the code was
correct, the code was not).
* g10/misc.c (map_pk_openpgp_to_gcry): New.
* g10/keyserver.c (print_keyrec): Map OpenPGP algorithm ids.
--
Although we don't have support for ECC, we want to print a proper
algorithm name in keyserver listings. This will only work while using
a ECC enabled Libgcrypt. Problem reported by Kristian Fiskerstrand.
* scd/command.c (MAXLEN_SETDATA): New.
(cmd_setdata): Add option --append.
* g10/call-agent.c (agent_scd_pkdecrypt): Use new option for long data
* scd/app-openpgp.c (struct app_local_s): Add field manufacturer.
(app_select_openpgp): Store manufacturer.
(do_decipher): Print a note for broken cards.
--
Please note that I was not able to run a full test because I only have
broken cards (S/N < 346) available.
* findkey.c (agent_public_key_from_file): Fix use of
gcry_sexp_build_array.
--
A test case leading to a segv in Libgcrypt is
gpg-connect-agent \
"READKEY 9277C5875C8AFFCB727661C18BE4E0A0DEED9260" /bye
The keygrip was created by "monkeysphere s", which has a comment.
gcry_sexp_build_array expects pointers to the arguments which is quite
surprising. Probably ARG_NEXT was accidentally implemented wrongly.
Anyway, we can't do anything about it and thus need to fix the check
the users of this function.
Some-comments-by: Werner Koch <wk@gnupg.org>
agent/genkey.c: s/to to/to/
sm/*.c: s/failed to allocated/failed to allocate/
sm/certlist.c: s/should have not/should not have/
Consistency fix:
* g10/gpg.c, kbx/kbxutil.c, sm/gpgsm.c: uppercase after Syntax
* scd/apdu.c (new_reader_slot): Acquire lock.
(open_ct_reader, open_pcsc_reader_direct, open_pcsc_reader_wrapped)
(open_ccid_reader, open_rapdu_reader): Release lock.
--
Fixes a test case of:
No libpcsclite1 installed.
Run gpg-agent
Run command "gpg-connect-agent learn /bye" with no card/token
Sometimes it fails: ERR 100663356 Not supported <SCD>
While it should be always: ERR 100663404 Card error <SCD>
* scd/app.c (select_application): Reorder application tests.
--
Although the DINSIG application is available on most German cards, it
is in reality not used. Thus showing the Geldkarte application is
more desirable for a good user experience.
Conflicts:
scd/app.c
