* configure.ac (NAME_OF_SENDMAIL): New ac_define.
* tools/send-mail.c (run_sendmail): Use it.
--
We used to ac_subst the SENDMAIL in the old keyserver via mail script.
We can reuse this to avoid a fixed name for sendmail in the
send-mail.c helper.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 08147f8bbdca40c98c2a094fa48fab15b8339c80)
GnuPG-bug-id: 4886
* tools/gpgconf-comp.c (gc_component_check_options): Take care of
--homedir.
(retrieve_options_from_program): Ditto.
--
Note that due to the large changes in master we could not backport the
patch from there.
GnuPG-bug-id: 4882
* g10/gpg.c (opts): New options --auto-key-import,
--no-auto-key-import, and --no-include-key-block.
(gpgconf_list): Add them.
* g10/options.h (opt): Add field flags.auto_key_import.
* g10/mainproc.c (check_sig_and_print): Use flag to enable that
feature.
* tools/gpgconf-comp.c: Give the new options a Basic config level.
--
Note that the --no variants of the options are intended for easy
disabling at the command line.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported from master.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (EXTERN_UNLESS_MAIN_MODULE): Add the definion only
here but now without the Norcroft-C. Change all other places where it
gets defined.
* common/iobuf.h (iobuf_debug_mode): Declare unconditionally as
extern.
* common/iobuf.c (iobuf_debug_mode): Define it here.
* agent/gpg-agent.c (INCLUDED_BY_MAIN_MODULE): Define here and also in
all main modules of all other programs.
* g10/main.h: Put util.h before the local header files.
--
This change is required for use with gcc/ld's LTO feature which does
not allow common blocks. Further gcc 10 will make -fno-common the
default and thus this chnage is always needed. What a pitty.
Co-authored-by: Tomáš Mráz
GnuPG-bug-id: 4831
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (list_dirs): Check whether the homedir has been
taken from the registry.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 7f12fb55f9757cd68147eca8f162c85378538405)
* tools/wks-receive.c (decrypt_data): Change limit.
--
The former limit ~1MiB of was used during development.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit b0e8724b102535c27a8c973ec038d340858a8eb8)
* tools/gpgconf-comp.c (gc_component_kill): Reverse the order.
--
Cherry-picked from master commit:
7c877f942a344e7778005840ed7f3e20ace12f4a
The order matters in a corner case; On a busy machine, there was a
race condition between gpg-agent's running KILLAGENT command and its
accepting incoming request on the socket. If a request by
gpg-connect-agent was accepted, it resulted an error by sudden
shutdown. This change of the order can remove such a race.
Here, we know backend=0 is none.
GnuPG-bug-id: 4577
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpgtar-create.c (gpgtar_create): Switch to the -C directory.
--
The -C option is pretty useful given that pattern are always relative
to the current directory. In contrast to GNU tar, the switching is
done only once.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit b3a7a5140784b5a015107b5c5c73b15ae44e71dc)
* tools/gpgtar.h (struct tarinfo_s): New.
* tools/gpgtar.c (cmd, skip_crypto, files_from, null_names): Move
global vars more to the top.
(set_cmd): Rename 'cmd' to 'c'.
* tools/gpgtar-list.c (parse_header): Add arg 'info' and improve error
messages.
(read_header): Add arg 'info' and update counter.
(skip_data): Ditto.
(gpgtar_list): Pass info object to read functions.
(gpgtar_read_header): Add arg 'info'.
* tools/gpgtar-extract.c (gpgtar_extract): add arg 'info' and pass on.
(extract_regular): Add arg 'info' and update counter.
--
This now prints the block number of a header with error.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 72feb8fa8280aba674573a1afc955a92e8065242)
* tools/gpgconf-comp.c (gc_component_t): Move this enum to ...
* tools/gpgconf.h: here.
* tools/gpgconf.c (oShowSocket): New.
(opts): Add new option.
(main): Implement new option.
--
This is a convenience options for software which directly connects to
gpg-agent and thus needs to new the socket. By using --show-socket
along with --launch that software can also autostart the agent or the
dirmngr. Without this two calls to gpgconf would be required.
Actually the same behaviour can be achieved by running
gpg-connect-agent to query the running gpg-agent's socket via GETINFO.
The gpg-connect also makes sure that the agent is started. This is
not anymore suggested because gpgconf shall in future be used for all
such things.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit ac485b4f253ad6bbd2bc648650b56d60fc82f89d)
* tools/gpg-wks-client.c (encrypt_response): Add arg -z0.
* tools/gpg-wks-server.c (encrypt_stream): Ditto.
--
If for example a server was built without the development packages of
the compression libraries installed, the server will not be able to
decrypt a request. In theory this can't happen due to the preference
system but it is just to easy to create the server's key using a
different version of gpg and then use gpg-wks-server built
differently.
For the short messages we exchange compression is not really required
and thus we better do without to make the system more robust.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 70a8db0333e3c22403b3647f8b5f924f6dace719)
* tools/wks-util.c (wks_get_key, wks_filter_uid): The filter
expression needs a space before the value.
(install_key_from_spec_file): Replace es_getline by es_read_line and
remove debug output.
--
A value of starting with '<' was considered an invalid operator due to
our tokenization method.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 0c36ec241d285545f286069843de4f663cd274a3)
* tools/wks-util.c (wks_compute_hu_fname): Stat and create directory
if needed.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 73e5b0ec9b9ba5e04e55f8c42d81e23df7c3afe0)
* tools/gpg-wks-client.c (aInstallKey, aRemoveKey, oDirectory): New.
(opts): Add "--install-key", "--remove-key" and "-C".
(parse_arguments): Parse them.
(main): Check that the given directory exists. Implement the new
commands.
--
These commands maybe useful to prepare a WKD directory on a non-Unix
box using the standard wks client.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 602b1909632925d5a2e0778c102d66109795c627)
* tools/gpg-wks.h (opt): Add field with_colons.
* tools/gpg-wks-client.c (oWithColons): New const.
(opts, parse_arguments): Add option --with-colons.
(main): Change aSupported to take several domains in --with-colons
mode.
(command_send): Factor policy getting code out to ...
(get_policy_and_sa): New function.
(command_supported): Make use of new function.
--
In addition to this the --create command now also supports a
submission address only in the policy file. That means the
submission-address file is not anymore required and can be replaced by
the policy file.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit e3a1e80d13487c9336640a99b2f6d385d7d6f55c)
* tools/rfc822parse.c (HEADER_NAME_CHARS): New. Taken from
mime-maker.c.
(rfc822_valid_header_name_p): New. Based on code from mime-maker.c.
(rfc822_capitalize_header_name): New. Copied from mime-maker.c.
(capitalize_header_name): Remove. Replace calls by new func.
(my_toupper, my_strcasecmp): New.
* tools/mime-maker.c: Include rfc822parse.h.
(HEADER_NAME_CHARS, capitalize_header_name): Remove.
(add_header): Replace check and capitalization by new functions.
--
This is a straightforward change with two minor chnages:
- In rfc822parse.c the capitalization handles MIME-Version special.
- The check in mime-maker bow detects a zero-length name as invalid.
my_toupper and my_strcasecmp are introduced to allow standalone use
of that file.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit f03928b16c4fb00077d22d8ec141575ef6d26913)
* tools/gpg-wks-server.c (opts): Add '--directory',
(main): Explain how to set correct permissions.
(command_list_domains): Create an empty policy file and remove the
warning for an empty policy file.
--
Note that a policy file is meanwhile required and thus is is useful to
create it.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit f248416bc9792e80bb0785302058131de49d7639)
* tools/gpg-connect-agent.c (do_open): dup the fileno and close the
stream.
GnuPG-bug-id: 4220
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 378719f25fe00d46393541f4a4f79e04484c3000)
* tools/gpgconf-comp.c (get_config_filename): Allow UNC paths.
--
The homedir of GnuPG on Windows can be on a network share
e.g. if %APPDATA% is redirected to a network share. The
file API calls work and GnuPG itself works nicely
with such paths so gpgconf should work with them, too.
GnuPG-Bug-Id: T3818
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* tools/gpg-wks-client.c (get_key_status_parm_s)
(get_key_status_cb, get_key): Move to ...
* tools/wks-util.c: ...here.
(get_key): Rename to wks_get_key.
* tools/gpg-wks-server.c: Include userids.h.
(command_install_key): Allow use of a fingerprint.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-wks.h (policy_flags_s): Add field 'submission_address'.
* tools/wks-util.c (wks_parse_policy): Parse that field.
(wks_free_policy): New.
* tools/gpg-wks-client.c (command_send): Also try to take the
submission-address from the policy file. Free POLICY.
* tools/gpg-wks-server.c (process_new_key): Free POLICYBUF.
(command_list_domains): Free POLICY.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (oStatusFD): New const.
(opts): New option --status-fd.
(statusfp): New var.
(set_status_fd): New.
(gpgconf_write_status): New.
(gpgconf_failure): New.
(main): Set status fd and replace exit by gpgconf_failure.
* tools/gpgconf-comp.c: Repalce exit by gpgconf_failure.
(gc_process_gpgconf_conf): Print a few warning status messages.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (main): Allow setting of the default compliance.
* tools/gpgconf-comp.c (gc_options_gpgsm): Add "compliance".
--
This is required so that we can use this option in in gpgconf.conf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgtar-extract.c: Prefer opt.filename over filename
for the directory prefix.
--
If you would extract from stdin (filename -) and use set-filename
to provide a real filename the "-" would be used for the directory
name. With this change an explicit filename is prefered.
GnuPG-Bug-Id: T3500
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* tools/gpgconf-comp.c (retrieve_options_from_program): Add arg
only_installed.
(gc_component_retrieve_options): Use this if we want to process all
components.
--
Note that this also also ignores them in --with-defaults. This is
useful for systems which come without scdaemon.
GnuPG-bug-id: 3313
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/wks-util.c (list_key_status_cb): Rename to key_status_cb.
(wks_filter_uid): New.
(wks_list_key): Allow FPR to be NULL. Return an error if no
fingerprint was found.
* tools/gpg-wks-server.c (process_new_key)
(check_and_publish): Remove now useless extra check for FPR.
* tools/gpg-wks-client.c (command_check): Ditto.
(command_send): Filter out the newest uid.
--
This fixes the case of having several userids with all the the same
mailbox. Now we use the latest user id created. This patch is also a
prerequisite to automatically create a new user id for providers with
the mailbox-only policy.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-wks-client.c (command_send): Allow sending in draft-1
mode.
--
Obviously Posteo did not implement the current draft and thus it was
not possible to send a request to them. This hack uses the old method
for posteo.de. Not sending it encrypted is okay here because they use
authenticated sending anyway.
Signed-off-by: Werner Koch <wk@gnupg.org>
