* g10/gpg.c (main): Set some list options.
--
The new command --show-keys is commonly used to check the content of a
file with keys. In this case it can be expected that all included
subkeys and uids are of interested, even when they are already expired
or have been revoked.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aShowKeys): New const.
(opts): New command --show-keys.
(main): Implement command.
* g10/import.c (import_keys_internal): Don't print stats in show-only
mode.
(import_one): Be silent in show-only mode.
--
Using
--import --import-options show-only
to look at a key is too cumbersome. Provide this shortcut and also
remove some diagnostic cruft in this case.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oAllowMultisigVerification)
(oAllowMultipleMessages, oNoAllowMultipleMessages): Remove.
(opts): Turn --allow-multisig-verification, --allow-multiple-messages
and --no-allow-multiple-messages into NOPs
* g10/options.h (struct opt): Remove flags.allow_multiple_messages.
* g10/mainproc.c (proc_plaintext): Assume allow_multiple_messages is
false.
--
These options are very old compatibility hacks and should not be used
anymore. We keep them as dummy options in case someone has them in
the conf file.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Make --pgp6 an alias for --pgp7.
* common/compliance.h (gnupg_compliance_mode): Remove CO_PGP6.
* g10/options.h (PGP6): Remove. Adjust all users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Tuen options --force-mdc, --no-force-mdc, --disable-mdc
and --no-disable-mdc into NOPs.
* g10/encrypt.c (use_mdc): Simplify. MDC is now almost always used.
(use_aead): Ignore MDC options. Print warning for missing MDC feature
flags.
* g10/pkclist.c (warn_missing_mdc_from_pklist): Rename to ...
(warn_missing_aead_from_pklist): this and adjust.
--
The MDC is now always used except with --rfc2440 which will lead to a
a big fat warning.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oNoMDCWarn): Remove.
(opts): Make --no-mdc-warn a NOP.
(main): Don't set var.
* g10/options.h (struct opt): Remove 'no_mdc_var'.
* g10/cipher-cfb.c (write_header): Assume opt.no_mdc_warn is false.
* g10/mainproc.c (proc_encrypted): Ditto.
--
Users should not be allowed to suppress the warning that they are
shooting into their foot.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (g10_exit): Print STATUS_FAILURE only based on passed
return code and not on the presence of any call to log_error.
--
This fixes an actual regression in GPGME where FAILURE is considered
for example by a signature verify operation. The operation will simply
fail and not just record that that a signature could not be verified.
In particular for files with more than one signature a log_error if
often called to show that a pubkey is missing for one of the
signatures. Using that log_error is correct in that case.
Fixes-commit: 0336e5d1a7b9d46e06c838e6a98aecfcc9542882
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oNoSymkeyCache): New.
(opts): Add that option.
(main): Set var.
* g10/options.h (struct opt): New field no_symkey_cache.
* g10/passphrase.c (passphrase_to_dek): Implement that feature.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (write_status_failure): Make it print only once.
* g10/gpg.c (wrong_args): Bump error counter.
(g10_exit): Print a FAILURE status if we ever did a log_error etc.
(main): Use log_error instead of log_fatal at one place. Print a
FAILURE status for a bad option. Ditto for certain exit points so
that we can see different error locations.
--
This makes it easier to detect errors by tools which have no way to
get the exit code (e.g. due to double forking).
GnuPG-bug-id: 3872
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oRequestOrigin): New const.
(opts): New option --request-origin.
(main): Parse that option.
* g10/options.h (struct opt): Add field request_origin.
* g10/call-agent.c (start_agent): Send option to the agent.
* sm/gpgsm.c (oRequestOrigin): New const.
(opts): New option --request-origin.
(main): Parse that option.
* sm/gpgsm.h (struct opt): Add field request_origin.
* sm/call-agent.c (start_agent): Send option to the agent.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Add new option.
(opt_set_iobuf_size): New var.
(set_debug): Set the option.
* tests/openpgp/armor.scm: Use this option to revert the buffer size
to the one which used to exhibit the tested bugs.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgpdefs.h (PKT_ENCRYPTED_AEAD): New const.
* g10/dek.h (DEK): Increase size of use_aead to 4 bits.
* g10/filter.h (cipher_filter_context_t): Add new fields for AEAD.
* g10/packet.h (PKT_encrypted): Add fields aead_algo, cipher_algo, and
chunkbyte.
* g10/build-packet.c (do_encrypted_aead): New.
(build_packet): Call it.
* g10/parse-packet.c (dump_sig_subpkt): Handle SIGSUBPKT_PREF_AEAD.
(parse_one_sig_subpkt, can_handle_critical): Ditto.
(parse_encrypted): Clear new PKT_ENCRYPTED fields.
(parse_encrypted_aead): New.
(parse): Call it.
* g10/gpg.c (main): Take care of --rfc4880bis option when checking
compliance.
* g10/cipher-aead.c: Replace the stub by real code.
* g10/decrypt-data.c (decode_filter_ctx_t): Add fields for use with
AEAD.
(aead_set_nonce): New.
(aead_set_ad): New.
(decrypt_data): Support AEAD.
(aead_underflow): New.
(aead_decode_filter): New.
* g10/encrypt.c (use_aead): Make that new fucntion work.
(encrypt_simple): Use default_aead_algo() instead of EAX.
* g10/mainproc.c (proc_encrypted): Support AEAD.
(do_proc_packets): Support PKT_ENCRYPTED_AEAD.
--
This code has seen only a very few manual tests. Encrypting always
uses a 64k chunks and decryption has not been tested with larger
chunks. Those small chunks make debugging much faster.
Tests can be done using:
gpg --rfc4880bis --pinentry-mode=loopback --passphrase abc \
--force-aead --aead-algo ocb --s2k-mode 0 --cipher AES \
-v -z 0 --status-fd 2 -c <INFILE >OUTFILE
and
gpg --rfc4880bis --pinentry-mode=loopback --passphrase=abc \
--status-fd 2 -v -d <INFILE >OUTFILE
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/dek.h (DEK): Turn fields use_mdc, algo_printed and symmetric
into single bit vars. Make sure they are always set to 1 or 0.
(DEK): New field use_aead.
* g10/options.h (struct opt): New field force_aead.
* g10/pkclist.c (select_aead_from_pklist): New.
* g10/gpg.c (oForceAEAD): New const.
(opts): New options "--force-aead".
(main): Set new option.
* g10/encrypt.c (use_aead): New.
(encrypt_simple): Implement new flags DEK.use_aead.
(encrypt_crypt): Ditto.
(encrypt_filter): Ditto.
* g10/sign.c (sign_symencrypt_file): Ditto.
--
This patch should be enough to detect whether AEAD can be used.
Not tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/pkscreening.c: New.
* common/pkscreening.h: New.
* common/Makefile.am (common_sources): Add them.
* g10/gpg.c (opts): New option --with-key-screening.
* g10/options.h (struct opt): New field with_key_screening.
* g10/keylist.c: Include pkscreening.h.
(print_pk_screening): New.
(list_keyblock_print): Call it.
(print_compliance_flags): Call it.
* sm/gpgsm.c (opts): New option --with-key-screening.
* sm/gpgsm.h (scruct opt): New field with_key_screening.
* sm/keylist.c: Include pkscreening.h.
(print_pk_screening): New.
(print_compliance_flags): Call it. Add new arg cert.
(list_cert_colon): Pass arg cert
(list_cert_std): Call print_pk_screening.
* sm/fingerprint.c (gpgsm_get_rsa_modulus): New.
--
This new option can be used to detect ROCA affected keys. To scan an
entire keyring and print the affected fingerprints use this:
gpg -k --with-key-screening --with-colons | gawk -F: \
'$1~/pub|sub|sec|ssb|crt/ && $18~/\<6001\>/ {found=1;next};
$1=="fpr" && found {print $10}; {found=0}'
The same works for gpgsm. Note that we need gawk due to the "\<" in
the r.e.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (gpgconf_list): Announce "auto-key-retrieve".
(main): Simplify setting of KEYSERVER_AUTO_KEY_RETRIEVE.
* tools/gpgconf-comp.c: Make "no-auto-key-retrieve" invisible. Make
"auto-key-retrieve" an expert option.
--
This basically reverts 9bb13a0e819334681caca38c9074bd7bfc04e45e
because --no-auto-key-retrieve is again the default. Note that we
allow both options for the sake of profiles.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_options_gpg): Add max-cert-depth,
completes-needed, and marginals-needed options.
* g10/gpg.c (gpgconf_list): Likewise.
--
Some tests to come for the PGP trust model will need to manipulate
these parameters.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* g10/gpg.c (main): remove KEYSERVER_AUTO_KEY_RETRIEVE from the
default keyserver options.
* doc/gpg.texi: document this change.
--
This is a partial reversion of
7e1fe791d188b078398bf83c9af992cb1bd2a4b3. Werner and i discussed it
earlier today, and came to the conclusion that:
* the risk of metadata leakage represented by a default
--auto-key-retrieve, both in e-mail (as a "web bug") and in other
contexts where GnuPG is used to verified signatures, is quite high.
* the advantages of --auto-key-retrieve (in terms of signature
verification) can sometimes be achieved in other ways, such as when
a signed message includes a copy of its own key.
* when those other ways are not useful, a graphical, user-facing
application can still offer the user the opportunity to choose to
fetch the key; or it can apply its own policy about when to set
--auto-key-retrieve, without needing to affect the defaults.
Note that --auto-key-retrieve is specifically about signature
verification. Decisions about how and whether to look up a key during
message encryption are governed by --auto-key-locate. This change
does not touch the --auto-key-locate default of "local,wkd". The user
deliberately asking gpg to encrypt to an e-mail address is a different
scenario than having an incoming e-mail trigger a potentially unique
network request.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* doc/gpg.texi: Document new option.
* g10/call-dirmngr.c (create_context): Fail if option is given.
* g10/gpg.c (cmd_and_opt_values): New value.
(opts): New option.
(gpgconf_list): Add new option.
(main): Handle new option.
* g10/options.h (struct opt): New field 'disable_dirmngr'.
* tools/gpgconf-comp.c (gc_options_gpg): New option.
GnuPG-bug-id: 3334
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (gpgconf_list): Print no-auto-key-retrieve instead of
auto-key-retrieve.
* tools/gpgconf-comp.c (gc_options_gpg): Replace auto-key-retrieve by
no-auto-key-retrieve and chnage level from invisible to advanced.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add KEYSERVER_AUTO_KEY_RETRIEVE to the default
keyserver options. Set the default for --auto-key-locate to
"local,wkd". Reset that default iff --auto-key-locate has been given
in the option file or in the commandline.
* g10/getkey.c (parse_auto_key_locate): Work on a copy of the arg.
--
GnuPG-bug-id: 3324
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (apply_meta_data): Remove arg 'merge'. Add arg 'url'.
Implement WKD and DANE key origin.
(import_keys_internal): Add arg 'url' and change all callers.
(import_keys_es_stream): Ditto.
(import): Ditto.
(import_one): Ditto.
* g10/keylist.c (list_keyblock_print): Fix update URL printing.
* g10/call-dirmngr.c (gpg_dirmngr_wkd_get): Add arg 'r_url' to return
the SOURCE. Pass ks_status_cb to assuan_transact.
* g10/keyserver.c (keyserver_import_wkd): Get that URL and pass it to
the import function.
--
Note that this only for new keys. Merging this info will be added
soon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_keys_stream): Remove this unused function.
(import_keys_internal): Add arg origin.
(import_keys): Ditto.
(import_keys_es_stream): Ditto.
(import): Ditto.
(import_one): Ditto.
(apply_meta_data): New stub.
(import_secret_one): Pass 0 for ORIGIN.
* g10/keyserver.c (keyserver_get_chunk): For now pass 0 for ORIGIN.
(keyserver_fetch): Add arg origin.
(keyserver_import_cert): Pass KEYORG_DANE for ORIGIN.
(keyserver_import_wkd): Pass KEYORG_WKD for ORIGIN.
* g10/gpg.c (main): Pass OPT.KEY_ORIGIN to import_keys and
keyserver_fetch.
* g10/card-util.c (fetch_url): Pass KEYORG_URL for ORIGIN.
--
This is just the framework; applying the meta data will be done in
another commit.
GnuPG-bug-id: 3252
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpg.texi: Document the new import option.
* g10/gpg.c (main): Make the new option default to yes.
* g10/import.c (parse_import_options): Parse the new option.
(import_one): Act on the new option.
* g10/options.h (IMPORT_REPAIR_KEYS): New macro.
GnuPG-bug-id: 2236
Signed-off-by: Justus Winter <justus@g10code.com>
* common/compliance.c (gnupg_parse_compliance_option): New function.
* common/compliance.h (struct gnupg_compliance_option): New type.
(gnupg_parse_compliance_option): New prototype.
* g10/gpg.c (parse_compliance_option): Remove function.
(compliance_options): New variable.
(main): Adapt callsite.
* sm/gpgsm.c (main): Use the new common function.
* sm/gpgsm.h (opt): New field 'compliance'.
GnuPG-bug-id: 3191
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (set_compliance_option): The specification, section 4.1.1,
forbids the use of encryption without integrity protection.
GnuPG-bug-id: 3191
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c: Define _dowildcard = -1;
--
If this value is defined wildcard support in the c runtime
is enabled again. This fixes a regression caused by switching to
mingw 3.0
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* g10/keydb.h (KEYDB_HANDLE): Move typedef to ...
* g10/gpg.h: here.
(struct server_control_s): Add field 'cached_getkey_kdb'.
* g10/gpg.c (gpg_deinit_default_ctrl): Release that keydb handle.
* g10/getkey.c (getkey_end): Cache keydb handle.
(get_pubkey): Use cached keydb handle.
* kbx/keybox-search.c (keybox_search_reset): Use lseek instead of
closing the file.
--
Before this patch a "gpg --check-sigs" opened and closed the keybox
file for almost every signature check. By caching the keydb handle
and using lseek(2) this can be limited to just 2 times. This might
speed up things on Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
For proper operations as a server we need to avoid global variables.
Thus we need to pass the session state CTRL to most functions. Quite
a lot of changes but fortunately straightforward to do.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aQuickSetPrimaryUid): New const.
(opts): New command --quick-set-primary-uid.
(main): Implement it.
* g10/keyedit.c (keyedit_quick_adduid): Factor some code out to ...
(quick_find_keyblock): new func.
(keyedit_quick_revuid): Use quick_find_keyblock.
(keyedit_quick_set_primary): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
