* scd/command.c (cmd_passwd): Add option --clear.
(send_status_printf): New.
* scd/app-common.h (APP_CHANGE_FLAG_CLEAR): New.
* scd/app-nks.c (do_change_pin): Return an error if that option is
used.
* scd/app-openpgp.c (do_change_pin): Ditto.
--
Card application may support this option to clear the PIN verification
status of a specific PIN.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/scdaemon.c (get_active_connection_count): New.
(start_connection_thread): Bump ACTIVE_CONNECTIONS up and down.
* scd/command.c (cmd_getinfo): Add subcommand "connections".
--
Apply gpg-agent change to scdaemon. See the commit in 2016-08-06:
40d16029ed
Then, add kicking the loop, so that main loop can notice the change of
the connection.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (select_application): Fix the logic if periodical check is
needed. If it is needed for newly found device(s), kick the loop.
(scd_update_reader_status_file): Return value if select(2) should be
called with timeout.
* scd/ccid-driver.c (ccid_require_get_status): Don't return 0 for
token with no interrupt transfer for now.
* scd/command.c (open_card_with_request): Fix scan by SERIALNO.
* scd/scdaemon.c (update_usb): Remove.
(handle_connections): Evaluate need_tick after handle_tick.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-common.h (struct app_ctx_s): Rename field to
periodical_check_needed.
* scd/scdaemon.c (update_usb): Rename from update_fdset_for_usb.
Don't use libusb_get_pollfds any more.
(scd_kick_the_loop): New.
(need_tick): Follow the rename.
(handle_connections): No libusb event handling here.
* scd/app.c (app_new_register): Follow the change of rename.
(select_application, scd_update_reader_status_file): Likewise.
* scd/ccid-driver.c (ccid_usb_thread_is_alive): New.
(intr_cb): Call scd_kick_the_loop.
(ccid_usb_thread): New. Thread to invoke INTERRUPT callback.
(ccid_open_usb_reader): Add thread invocation.
(ccid_require_get_status): Remove
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP.
(do_close_reader): Carefully handle handle->transfer.
(get_escaped_usb_string): Insert npth_unprotect/npth_protect.
(do_close_reader, bulk_out, bulk_in, abort_cmd, ccid_slot_status)
(ccid_transceive, ccid_transceive_secure): Likewise.
--
It found that libusb_get_pollfds is not supported on Windows.
Besides, it's a bit difficult to use for the select loop.
Thus, we use the thread named ccid_usb_thread, instead.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c(struct reader_table_s): Add require_get_status.
(apdu_connect): Change return value meaning. Call apdu_reset here.
* scd/app.c (app_new_register): Add require_get_status.
(select_application): Use the return value of apdu_connect.
(scd_update_reader_status_file): Call update_fdset_for_usb with
checking all_have_intr_endp.
(app_list_start, app_list_finish): Remove.
* scd/ccid-driver.c (struct ccid_driver_s): Add transfer.
(intr_cb): Don't call libusb_transfer in this callback.
(ccid_require_get_status): New.
(do_close_reader): Call libusb_transfer here.
* scd/scdaemon.c (update_fdset_for_usb): Remove the first argument.
--
With Gnuk Token, it works fine as expected. With Gemalto reader,
intr_cb is not called when card is removed. So, the macro
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP is not defined yet.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (reader_table_lock, apdu_init): New.
(new_reader_slot): Serialize by reader_table_lock.
* scd/app.c (lock_app, unlock_app, app_new_register): Fix error code
usage.
(initialize_module_command): Call apdu_init.
* scd/scdaemon.c (main): Handle error for initialize_module_command.
--
This is a long standing bug. There are two different things; The
serialization of allocating a new SLOT, and the serialization of using
the SLOT. The latter was implemented in new_reader_slot by lock_slot.
However, the former was not done. Thus, there was a possible race where
a same SLOT is allocated to multiple threads.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (lock_app): Rename from lock_reader and use internal field
of APP.
(unlock_app): Likewise.
(app_dump_state): Use APP.
(application_notify_card_reset): Remove.
(check_conflict): Change API for APP, instead of SLOT.
(check_application_conflict): Likewise.
(release_application_internal): New.
(app_reset): New.
(app_new_register): New.
(select_application): Change API for APP, instead of SLOT.
(deallocate_app, release_application): Modify for manage link.
(report_change): New.
(scd_update_reader_status_file): Moved from command.c and
use APP list, instead of VREADER.
(initialize_module_command): Moved from command.c.
* scd/command.c (TEST_CARD_REMOVAL): Remove.
(IS_LOCKED): Simplify.
(vreader_table): Remove.
(vreader_slot, update_card_removed): Remove.
(do_reset): Call app_reset.
(get_current_reader): Remove.
(open_card): Add SCAN arg.
(cmd_serialno): No retry, since retry is done in lower layer in apdu.c.
No do_reset, since it is done in lower layer.
Add clearing card_removed flag.
(cmd_disconnect): Call apdu_disconnect.
(send_client_notifications): Modify for APP.
(update_reader_status_file): Remove.
--
APP is the abstraction of the card application. For management of
cards, it is better to focus on the APP instead of the physical reader.
This change makes support of multiple card/token easier.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/util.h: Provide replacement for GPGRT_ATTR_ macros when using
libgpg-error < 1.20.
* common/mischelp.h: Ditto.
* common/types.h: Ditto.
--
Given that libgpg-error is a dependency of all GnuPG related libraries
it is better to define such macros at only one place instead of having
similar macros at a lot of places. For now we need repalcement
macros, though.
The vreader table makes the code more clear by explicitly talking
about APDU slots and reader indices. It also accommodates for future
extensions.
* scd/scdaemon.h (server_control_s): Remove READER_SLOT.
* scd/scdaemon.c (scd_init_default_ctrl): Do not init READER_SLOT.
* scd/app.c (check_application_conflict): Add arg SLOT.
* scd/command.c (slot_status_s): Rename to vreader_s.
(server_local_s): Add field VREADER_IDX as replacement for
the READER_SLOT in server_control_s. Change all users.
(slot_table): Rename to vreader_table. Change all users.
(vreader_slot): New.
(do_reset, cmd_apdu): Map vreader to apdu slot.
(get_reader_slot): Rename to get_current_reader. Return -1 on error.
(open_card): Map vreader toapdu slot. Pass slot to
check_application_conflict.
(scd_command_handler): Init VREADER_IDX.
(update_reader_status_file): Reset SLOT field on error.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
* gpg-agent.c: New option --write-env-file.
* gpg-agent.c (handle_connections): Make sure that the signals we
are handling are not blocked.Block signals while creating new
threads.
* estream.c: Use HAVE_CONFIG_H and not USE_CONFIG_H!
(es_func_fd_read, es_func_fd_write): Protect against EINTR.
* gpg-agent.texi (Agent UPDATESTARTUPTTY): New.
* scdaemon.c (handle_connections): Make sure that the signals we
are handling are not blocked.Block signals while creating new
threads.
(handle_connections): Include the file descriptor into the name of
the thread.
* acinclude.m4: Ditto.
* scdaemon.texi: Removed OpenSC specific options.
* app-p15.c: New. Basic support for pkcs15 cards without OpenSC.
There are quite a couple of things missing but at least I can use
my old TCOS cards from the Aegypten-1 development for signing.
* app.c (select_application): Detect pkcs15 applications.
* Makefile.am (scdaemon_SOURCES): Removed card.c, card-common.h
and card-p15.c because they are now obsolete. Added app-p15.c.
Removed all OpenSC stuff.
* command.c (do_reset, open_card, cmd_serialno, cmd_learn)
(cmd_readcert, cmd_readkey, cmd_pksign, cmd_pkdecrypt): Removed
all special cases for the old card.c based mechanisms.
* scdaemon.c, apdu.c: Removed all special cases for OpenSC.
stable version 0.1.x.
* scdaemon.texi (Card applications): New section.
* scdaemon.c (main): New option --disable-application.
* app.c (is_app_allowed): New.
(select_application): Use it to check for disabled applications.
* ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New.
* ccid-driver.c (ccid_open_reader): Support the stable 0.1 version
of libusb.
(ccid_get_atr): Handle short messages.
* apdu.c (my_rapdu_get_status): Implemented.
* Makefile.am (pkglib_PROGRAMS): Install it here.
* apdu.c (writen, readn): New.
(open_pcsc_reader, pcsc_send_apdu, close_pcsc_reader): Use the
pcsc-wrapper if we are using Pth.
* scdaemon.c, scdaemon.h: New option --pcsc-ccid.
* ccid-driver.c, ccid-driver.h: New but far from being useful.
* Makefile.am: Add above.
* apdu.c: Add support for that ccid driver.
* scdaemon.c, scdaemon.h: New option --disable-opensc.
* card.c (card_open): Implement it.
* apdu.c (open_osc_reader, osc_send_apdu): New.
(apdu_open_reader) [HAVE_OPENSC]: Use the opensc driver if not
disabled.
(error_string) [HAVE_OPENSC]: Use sc_strerror.
(send_apdu) [HAVE_OPENSC]: Call osc_apdu_send.
