* scd/app-openpgp.c (get_public_key): Fix a message.
(change_keyattr_from_string, ecc_writekey): Call mpi_release sooner.
(do_genkey): Add ECC support.
--
In OpenPGP card specification 3.0, ECC is introduced. So far, do_genkey
only supported RSA. Since KDF spec. is needed to calculate the
fingerprint, it is hard coded in app-openpgp.c. But it's defined by
OpenPGP ECC (RFC-6637), and card does nothing with KDF in fact.
Co-authored-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/iso7816.c (do_generate_keypair): Use const char * for DATA.
(iso7816_generate_keypair, iso7816_read_public_key): Likewise.
* scd/app-openpgp.c (get_public_key): Follow the change.
(do_genkey): Ditto. Use ERR instead of RC. Use u32 for CREATED_AT.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (build_ecc_privkey_template): Size can be greater
than 128 when it comes with public key for curve of larger field.
--
Reported-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/gpg-agent.c (thread_init_once, initialize_modules): New.
(main): Make sure no daemonizing-fork call after npth_init, and no npth
calls before npth_init, with care of npth calls by assuan hooks.
* dirmngr/dirmngr.c (thread_init): New.
(main): Make sure npth_init must not be called before daemonizing fork.
* scd/scdaemon.c (main): Likewise.
--
It is simply the best for nPth not to allow the daemonizing fork after
npth_init, because semantics and implementations of forked child process
in a threaded application is a difficult corner case.
GnuPG-bug-id: 1779
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (ECC_FLAG_PUBKEY): New.
(send_key_attr, get_public_key, ecc_writekey, do_auth, do_decipher)
(parse_algorithm_attribute): Check ECC_FLAG_DJB_TWEAK.
(build_ecc_privkey_template): Add ECC_Q and ECC_Q_LEN.
Support offering public key when ECC_FLAG_PUBKEY sets.
(ecc_writekey): Supply ECC_Q and ECC_Q_LEN.
(parse_algorithm_attribute): Parse pubkey-required byte.
--
OpenPGPcard protocol specification version 3.2 supports algorithm
attributes for ECC key which specifies public key data is required for
"keytocard" command. This change supports the feature.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/asshelp.c (my_log_monitor): New var.
(my_libassuan_log_handler): Run that monitor.
(setup_libassuan_logging): Add arg to set a log monitor and change all
callers.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (update_card_removed): Call apdu_close_reader here.
--
This is update of the commit 8fe81055762d9c9e6f03fb7853a985c94ef73ac3
It is better apdu_close_reader is called in update_card_removed.
The commit 1598a4476466822e7e9c757ac471089d3db4b545 introduced a
regression, it doesn't close the reader after removal of the card, while
the code before the commit call apdu_close_reader in do_reset.
So, this fix.
GnuPG-bug-id: 2449
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/preset-passphrase.c, agent/protect-tool.c, dirmngr/dirmngr.c
* dirmngr/t-http.c, g10/gpg.c, g10/gpgv.c, g13/g13-syshelp.c
* g13/g13.c, kbx/kbxutil.c, scd/scdaemon.c, sm/gpgsm.c
* tests/gpgscm/main.c, tools/gpg-check-pattern.c
* tools/gpg-connect-agent.c, tools/gpgconf.c, tools/gpgtar.c
* tools/symcryptrun.c: Invoke log_set_prefix() with
human-readable labels.
--
Some invocations of log_set_prefix() were done with raw numeric values
instead of values that humans can understand. Use symbolic
representations instead of numeric for better readability.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/init.c (init_common_subsystems): Initialize libgcrypt.
* dirmngr/Makefile.am (dirmngr_ldap): Link with libgcrypt.
--
Most other modules already call gcry_check_version() after
init_common_subsystems() so may as well move initialization of libgcrypt
to here. Also fixes a warning in the system log from gpgconf --homedir.
Signed-off-by: Ben Kibbey <bjk@luxsci.net>
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
with clearer text.
In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something. When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.
These changes should make the language a bit clearer.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* scd/app.c (application_notify_card_reset): Add message for debug.
*scd/command.c (update_card_removed): Call release_application and set
SLOT -1 here.
(struct server_local_s): Remove app_ctx_marked_for_release.
(do_reset): Don't mark release but call release_application here.
(open_card): Remove app_ctx_marked_for_release handling.
(update_reader_status_file): Don't set SLOT here, so that it can be
released the APP by application_notify_card_reset in
update_card_removed.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/command.c (do_reset, cmd_restart): Reset app_ctx before calling
release_application.
--
Thanks to Ben Warren for the report.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* (parse_ccid_descriptor): nonnull_nad = 0 for all GEMPC device.
--
We can't use the driver for 08E6:3438, while it works well under PC/SC
service. I found that the library of ccid always uses the node
address = ZERO for all transactions. So, we extend the same handling
for not only GEMPC_CT30, but also for all its devices.
Debian-bug-id: 814584
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (opts): Add --homedir.
--
Without that entry the homedir setting won't work.
GnuPG-bug-id: 2386
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (create_server_socket): Call chmod before listen.
* scd/scdaemon.c (create_server_socket): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
--
This is just in case of a improperly set umask. Note that a connect
requires a write permissions.
* agent/gpg-agent.c (remove_socket): Do not remove the enclosing
directory.
* scd/scdaemon.c (cleanup): Ditto.
--
The socket directory is now below /run or at ~/.gnupg. Thus we should
not try to remove the directory of the socket. The auto-removal was
introduced at a time we used a temporary directory for the sockets.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (LIBUSB_CPPFLAGS): New.
* scd/Makefile.am (AM_CPPFLAGS): Add LIBUSB_CPPFLAGS.
* scd/ccid-driver.c: Use libusb 1.0 API.
--
Changes are straightforward, not use any new features.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (do_genkey): Strip leading zeros for fingerprint
computation.
--
This bug is difficult to reproduce because the probability is 1/256,
and key generation takes long time. The regression was introduced
when we add the support for ECC.
GnuPG-bug-id: 2150
* scd/apdu.c (pcsc_error_to_sw): map PCSC_E_NO_SERVICE and
PCSC_E_SERVICE_STOPPED to the internal SW_HOST_NO_READER error code.
--
Signed-off-by: Daniel Hoffend <dh@dotlan.net>
GnuPG-bug-id: 2167
In Windows 8 (and later), PC/SC service only runs when reader/token is
plugged in. After its removal, it returns PCSC_E_NO_SERVICE error.
This error should be handled as no reader. This comment is by gniibe.
* scd/app.c (lock_table): Remove LAST_APP field.
(lock_reader, app_dump_state, application_notify_card_reset)
(release_application): Follow the change.
(check_conflict): New.
(check_application_conflict): Lock the slot and call check_conflict.
(select_application): Call check_conflict and not use LAST_APP.
--
We don't need LAST_APP field but just keep the application context by
APP field. Since we have a reference counter, it is possible if we
can deallocate or not.
* scd/app-openpgp.c (do_decipher): Handle trancated cipher text.
Also fix xfree bug introduced.
--
In old format with no prefix, cipher text can be trancated when it
is parsed as MPI. Recover the value adding back zeros.
Fixes-commit: 11b2691eddc42e91651e4f95dd2731255a3e9211
* scd/app-openpgp.c (do_decipher): Check 0x02 also for 16+1 byte long
INDATA.
(do_decipher): Fix integer arithmetic in void pointer.
(do_decipher): Add missing memcpy.
--
I have not tested this fix but it is obvious.
Fixes-commit: 11b2691eddc42e91651e4f95dd2731255a3e9211
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (apdu_close_reader): Call CLOSE_READER method even if we
got an error from apdu_disconnect.
* scd/app-common.h (no_reuse): Remove.
* scd/app.c (application_notify_card_reset): Deallocate APP here.
(select_application, release_application): Don't use NO_REUSE.
--
Reproducible scenario: Invoke gpg --card-edit session from a terminal.
Invoke another gpg --card-edit session from another. Remove a token.
Insert a token again. Type RET on both terminals. One of terminal
answers "Conflicting usage".
Perhaps, having NO_REUSE field was to avoid race conditions. Now,
APP can be safely deallocated by application_notify_card_reset.
Thanks to the2nd.
* scd/app-openpgp.c (get_public_key): Improve error handling.
--
Found using the Clang Static Analyzer.
Signed-off-by: Justus Winter <justus@g10code.com>
* scd/ccid-driver.c (bulk_out): Use LIBUSB_ERRNO_NO_SUCH_DEVICE.
--
With libusb-compat library, the error is different than original
libusb. (The libusb-compat library is used by Fedora.)
* scd/ccid-driver.c (CCID_CMD_TIMEOUT): New.
(ccid_transceive_apdu_level, ccid_transceive): Use.
--
It is reported that key generation causes timeout with OpenPGPcard
v2.1. Ideally, timeout value could be determined at run-time by
examining card's ATR. Compile-time fixed value is OK for internal
CCID driver.
* scd/app-openpgp.c (change_rsa_keyattr): New.
(change_keyattr_from_string): Use change_rsa_keyattr.
(rsa_writekey): Call change_rsa_keyattr when different size.
(ecc_writekey): Try to change key attribute.
