* agent/gpg-agent.c (oCheckSymPassphrasePattern): New.
(opts): Add --check-sym-passphrase-pattern.
(parse_rereadable_options): Set option.
(main): Return option info.
* tools/gpgconf-comp.c: Add new option.
* agent/agent.h (opt): Add var check_sym_passphrase_pattern.
(struct pin_entry_info_s): Add var constraints_flags.
(CHECK_CONSTRAINTS_NOT_EMPTY): New to replace a hardwired 1.
(CHECK_CONSTRAINTS_NEW_SYMKEY): New.
* agent/genkey.c (check_passphrase_pattern): Rename to ...
(do_check_passphrase_pattern): this to make code reading
easier. Handle the --check-sym-passphrase-pattern option.
(check_passphrase_constraints): Replace arg no_empty by a generic
flags arg. Also handle --check-sym-passphrase-pattern here.
* agent/command.c (cmd_get_passphrase): In --newsymkey mode pass
CHECK_CONSTRAINTS_NEW_SYMKEY flag.
* agent/call-pinentry.c (struct entry_parm_s): Add constraints_flags.
(struct inq_cb_parm_s): New.
(inq_cb): Use new struct for parameter passing. Pass flags to teh
constraints checking.
(do_getpin): Pass constraints flag down.
(agent_askpin): Take constrainst flag from the supplied pinentry
struct.
--
Requirements for a passphrase to protect a private key and for a
passphrase used for symmetric encryption are different. Thus a
the use of a different pattern file will be useful. Note that a
pattern file can be used to replace the other passphrase constraints
options and thus we don't need to duplicate them for symmetric
encryption.
GnuPG-bug-id: 5517
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Change type of pinentry_formatted_passphrase
to int (as for other flags).
* agent/call-pinentry.c (setup_formatted_passphrase): Remove no longer
needed translated strings. Write option without value to Assuan
connection.
* agent/gpg-agent.c (opts): Use ARGPARSE_s_n for
oPinentryFormattedPassphrase.
(parse_rereadable_options): Set option to 1.
--
GnuPG-bug-id: 5553, 5517
* tools/gpg-check-pattern.c: Major rewrite.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
Here is a simple pattern file:
====================
# Pattern to reject passwords which do not comply to
# - at least 1 uppercase letter
# - at least 1 lowercase letter
# - at least one number
# - at least one special character
# and a few extra things to show the reject mode
# Reject is the default mode, ignore case is the default
#[reject]
#[icase]
# If the password starts with "foo" (case insensitive) it is rejected.
/foo.*/
[case]
# If the password starts with "bar" (case sensitive) it is rejected.
/bar.*/
# Switch to accept mode: Only if all patterns up to the next "accept"
# or "reject" tag or EOF match, the password is accepted. Otherwise
# the password is rejected.
[accept]
/[A-Z]+/
/[a-z]+/
/[0-9]+/
/[^A-Za-z0-9]+/
=================
Someone™ please write regression tests.
* sm/gpgsm.c (opts): Add option --ldapserver and make --keyserver an
alias.
--
We should use "keyserver" for OpenPGP and thus it is better to allow
for "ldapserver" here - it is the same convention as now used in
dirmngr.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit d6df1bf849)
* dirmngr/ks-engine-ldap.c (my_ldap_connect): Use LDAP_OPT_TIMEOUT.
* dirmngr/dirmngr.c (main): Move --ldaptimeout setting to ...
(parse_rereadable_options): here.
--
Note that this has not yet been tested. In fact a test with OpenLDAP
using a modified route got stuck in the connection attempt. Maybe it
works on Windows - will be tested later.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 317d5947b8)
* dirmngr/dirmngr.c (opts): Add option --ldapserver.
(ldapserver_list_needs_reset): New var.
(parse_rereadable_options): Implement option.
(main): Ignore dirmngr_ldapservers.conf if no --ldapserver is used.
* dirmngr/server.c (cmd_ldapserver): Add option --clear and list
configured servers if none are given.
--
This option allows to specify LDAP keyserver in dirmngr instead of
using gpgsm.conf.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit ff17aee5d1)
* common/keyserver.h: Remove.
* sm/gpgsm.h (struct keyserver_spec): Remove.
(opt): Change keyserver to a strlist_t.
* sm/gpgsm.c (keyserver_list_free): Remove.
(parse_keyserver_line): Remove.
(main): Store keyserver in an strlist.
* sm/call-dirmngr.c (prepare_dirmngr): Adjust for the strlist. Avoid
an ambiguity in dirmngr by adding a prefix if needed.
* g10/options.h (struct keyserver_spec): Move definition from
keyserver.h to here. Remove most fields.
* g10/keyserver.c (free_keyserver_spec): Adjust.
(cmp_keyserver_spec): Adjust.
(parse_keyserver_uri): Simplify.
(keyidlist): Remove fakev3 arg which does not make any sense because
we don't even support v3 keys.
--
We now rely on the dirmngr to parse the keyserver specs. Thus a bad
specification will not be caught immediately. However, even before
that dirmngr had stricter tests.
Signed-off-by: Werner Koch <wk@gnupg.org>
Ported-from: 9f586700ec
* tests/cms/samplemsgs/: Add sample messages.
* sm/gpgsm.c (main): Use gpgrt_fcancel on decryption error.
* sm/decrypt.c (decrypt_gcm_filter): New.
(gpgsm_decrypt): Use this filter if requested. Check authtag.
--
Note that the sample message pwri-sample.gcm.p7m is broken: The
authtag is duplicated to the authEncryptedContentInfo. I used a
temporary code during testing hack to that test message out.
* agent/command-ssh.c (ssh_handler_request_identities): Remove double
check of ERR.
* g10/getkey.c (get_pubkey_byname): Remove double use of break.
* g10/pkglue.c (pk_encrypt): Handle possible NULL-ptr access due to
failed malloc.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (read_p15_info): Improve D-TRUST card detection.
(do_getattr): Fix faulty code for the last commit. Append the product
name to MANUFACTURER.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_import_fprint_ntds): New.
* g10/getkey.c (get_pubkey_byname): Detect an attempt to search by
fingerprint in no_local mode.
--
See the man page. For testing use
gpg --auto-key-locate local,wkd,keyserver --locate-external-key \
FINGERPRINT
with at least one LDAP keyserver given in dirmngr.conf. On Windows
"ntds" may be used instead or in addtion to "keyserver".
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/keylist.c (do_show_certs): New.
(gpgsm_show_certs): New.
* sm/gpgsm.c (aShowCerts): New.
(opts): Add --show-certs.
(main): Call gpgsm_show_certs.
--
I have been using libksba test programs for countless times to look at
certificates and I always wanted to add such a feature to gpgsm. This
is simply much more convenient.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/comopt.c, common/comopt.h: New.
* common/Makefile.am: Add them.
* g10/gpg.c: Include comopt.h.
(main): Also parse common.conf.
* sm/gpgsm.c: Include comopt.h.
(main): Set a flag for the --no-logfile option. Parse common.conf.
* tools/gpgconf-comp.c (known_options_gpg): Remove "use-keyboxd", add
pseudo option "use_keyboxd".
(known_pseudo_options_gpg): Add pseudo option "use_keyboxd".
(known_options_gpgsm): Remove "use-keyboxd".
* tests/openpgp/defs.scm (create-gpghome): Create common.conf.
* doc/examples/common.conf: New.
--
Note that --use-keybox still works but prints a warning. We will
eventually remove this option becuase it was marked as an experimental
feature anyway.
It would be too confusing if gpg and gpgsm use different key storages.
Further, other components (e.g. dirmngr or gpg-wks-client) which call
gpg or gpgsm need to be aware that the keyboxd is used and pass that
option on the command line. Now that common.conf is always read (even
if --no-options is used) those tools will work instantly.
* scd/app-p15.c: Include openpgpdefs.h.
(struct prkdf_object_s): Add fields have_keytime and ecdh_kdf.
(read_p15_info): Set ecdh_kdf.
(keygrip_from_prkdf): Flag that we have the keytime.
(send_keypairinfo): Send the key time only if valid.
(send_key_fpr_line): New.
(send_key_fpr): New.
(do_getattr): Add KEY-FPR.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/ks-engine-ldap.c (ks_ldap_get): Print a SOURCE status.
* g10/options.h (opts): New field expl_import_self_sigs_only.
* g10/import.c (parse_import_options): Set it.
* g10/keyserver.c (keyserver_get_chunk): Add special options for LDAP.
--
I can be assumed that configured LDAP servers are somehow curated and
not affected by rogue key signatures as the HKP servers are. Thus we
can allow the import of key signature from LDAP keyservers by default.
GnuPG-bug-id: 5387
--
The tpm2d patches introduced a new --edit-key command: keytotpm. Add
a descriptive entry explaining what it does and how it works.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* scd/scdaemon.h (opt): Add field opcsc_shared.
* scd/scdaemon.c (opcscShared): New.
(opts): Add "--pcsc-shared".
(main): Set flag.
* scd/apdu.c (connect_pcsc_card): Use it.
(pcsc_get_status): Take flag in account.
* scd/app-openpgp.c (cache_pin): Bypass in shared mode.
(verify_chv2: Do not auto verify chv1 in shared mode.
* scd/app-piv.c (cache_pin): By pass caceh in shared mode.
--
This option should in general not be used. The patch tries to limit
bad effects but using shared mode is somewhat dangerous depending on
the other PC/SC users.
* scd/app-piv.c (app_select_piv): Allow for full AID.
--
It appears that SP-800-73-x is not too clear about the format of these
objects. Many current cards (such as the Yubikey 5 series) apparently
have only the PIX in DO 0x4F and only the RID in object 0x79/0x4F.
However, other cards as well as the PivApplet Javacard applet have the
full AID in 0x4F (which actually seems closer to what the standard
says). PivApplet also has the full AID in 0x79/0x4F, but this is
probably incorrect. (Here is a long discussion of the matter from an
OpenSC author:
https://github.com/arekinath/PivApplet/issues/43#issuecomment-772649709)
[Taken from a mail to gnupg-devel date 2021-02-03.]
Signed-off-by: Werner Koch <wk@gnupg.org>
--
This is based on a patch by
Co-authored-by: Thorsten Behrens <Thorsten.Behrens@CIB.de>
Co-authored-by: Todd Zullinger <tmz@pobox.com>
regarding Libassuan sent to gnupg-devel on 2018-02-02
* g10/gpg.c (oForceSignKey,opts): New option "--force-sign-key".
(main): Set it.
* g10/options.h (opt): New flag flags.force_sign_key.
* g10/keyedit.c (sign_uids): Use new flag.
--
GnuPG-bug-id: 4584
* scd/app-p15.c (struct gpgusage_flags_s): New.
(struct prkdf_object_s): Add field gpgusage.
(struct app_local_s): Add field any_gpgusage.
(dump_gpgusage_flags): New.
(read_p15_info): Parse athe gpgusage flags.
(do_getattr): Take care of the gpgusage flags.
--
This features allows to mark keys to be used for OpenPGP. This is
done by putting additional extended key infos into the certificate
stored on the cards. Only if any such extended key usage is detected
for a stored certificate this new mode chimes in.
This feature gives the card issuer a high flexibility on how to make
sure certain keys are used with OpenPGP.
* common/init.c (_init_common_subsystems) [W32]: Set the codepage to
UTF-8 for input and putput. Switch gettext to UTF-8.
* tools/gpgconf.c (main): Display the input and output codepage if
they differ.
* g10/gpg.c (utf8_strings) [W32]: Make sure this is always set.
--
With this patch the former patch to use ReadConsoleW and WriteConsoleW
in ttyio.c are kind of superfluous because the ANSI version of these
functions are also able to read/write UTF-8 directly given the console
code page has been set correctly. However, this seems to work only
with recent versions of Windows-10.
GnuPG-bug-id: 4365
* dirmngr/ldap-parse-uri.c (ldap_parse_uri): Support a new gpgNtds
extension.
* dirmngr/ks-engine-ldap.c (my_ldap_connect): Do ldap_init always with
hostname - which is NULL and thus the same if not given. Fix minor
error in error code handling.
--
Note that "gpgNtds" is per RFC-4512 case insensitive and has not yet
been officially regisetered. Thus for correctness the OID can be
used:
1.3.6.1.4.1.11591.2.5 LDAP URL extensions
1.3.6.1.4.1.11591.2.5.1 gpgNtds=1 (auth. with current user)
Note that the value must be 1; all other values won't enable AD
authentication and are resevered for future use.
This has been cherry-picked from the 2.2 branch,
commit 55f46b33df
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: New option --allow-old-cipher-algos.
(set_compliance_option): Set --rfc4880bis explictly to SHA256 and
AES256. Allow old cipher algos for OpenPGP, rfc4880, and rfc2440.
* g10/options.h (opt): Add flags.allow_old_cipher_algos.
* g10/misc.c (print_sha1_keysig_rejected_note): Always print the note
unless in --quiet mode.
* g10/encrypt.c (setup_symkey): Disallow by default algos with a
blocklengt < 128.
(encrypt_crypt): Ditto. Fallback by default to AES instead of 3DES.
* g10/pkclist.c (algo_available): Take care of old cipher also.
(select_algo_from_prefs): Use AES as implicit algorithm by default.
* tests/openpgp/defs.scm (create-gpghome): Set allow-old-cipher-algos.
--
GnuPG-bug-id: 3415
* tools/symcryptrun.c: Remove.
* tools/Makefile.am: Ditto.
* doc/tools.texi: Remove man page.
* configure.ac: Remove build option and tests used only by this tool.
* Makefile.am (AM_DISTCHECK_CONFIGURE_FLAGS): Do not build
symcryptrun.
--
symcryptrun is too ancient to be of any use and has not been tested in
many years. Thus we should not distribute it anymore.
* g10/gpg.c (oPrintPKARecords): Remove.
(opts): Remove --print-pka-records.
(main): Remove "pka-lookups","pka-trust-increase" and other PKA stuff.
* g10/options.h (EXPORT_DANE_FORMAT): Remove.
(VERIFY_PKA_LOOKUPS, VERIFY_PKA_TRUST_INCREASE): Remove.
(KEYSERVER_HONOR_PKA_RECORD): Remove.
* g10/packet.h (pka_info_t): Remove.
(PKT_signature): Remove flags.pka_tried and pka_info.
* g10/parse-packet.c (register_known_notation): Remove
"pka-address@gnupg.org".
* g10/pkclist.c (check_signatures_trust): Remove PKA stuff.
* g10/call-dirmngr.c (gpg_dirmngr_get_pka): Remove.
* g10/export.c (parse_export_options): Remove "export-pka".
(do_export): Adjust for this.
(write_keyblock_to_output): Ditto.
(do_export_stream): Ditto.
(print_pka_or_dane_records): Rename to ...
(print_dane_records): this and remove two args. Remove PKA printing.
* g10/free-packet.c (free_seckey_enc, cp_pka_info): Adjust for removed
pka_info field.
* g10/getkey.c (get_pubkey_byname): Make AKL_PKA a dummy.
* g10/keyserver.c: Remove "honor-pka-record".
(keyserver_import_pka): Remove.
* g10/mainproc.c (get_pka_address): Remove.
(pka_uri_from_sig): Remove.
(check_sig_and_print): Remove code for PKA.
--
PKA (Public Key Association) was a DNS based key discovery method
which looked up fingerprint by mail addresses in the DNS. This goes
back to the conference where DKIM was suggested to show that we
already had a better method for this available with PGP/MIME. PKA was
was later superseded by an experimental DANE method and is today not
anymore relevant. It is anyway doubtful whether PKA was ever widely
used.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
With these modifications it is now possible to store and retrieve keys
from an AD without manually tweaking the schema. Permissions need to
be set manuallay, though.
--
I accidently added a gpgSubCertID attribute not realizing that the
pgpSubKeyID already carries the long keyid. Remove that. Note that
the pgpkeyID has the short keyid and the long keyid has the name
pgpCertID.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/ks-engine-ldap.c (SERVERINFO_): New constants.
(my_ldap_connect): Relace args pgpkeyattrp and real_ldapp by a new
serverinfo arg. Set the new info flags.
(ks_ldap_get): Adjust for change.
(ks_ldap_search): Ditto.
(ks_ldap_put): Ditto. Replace xmalloc by xtrymalloc. Change the DN
for use with NTDS (aka Active Directory).
* doc/ldap/gnupg-ldap-init.ldif (pgpSoftware): Update definition of
pgpVersion.
* doc/ldap/gnupg-ldap-ad-init.ldif: New.
* doc/ldap/gnupg-ldap-ad-schema.ldif: New.
--
This is a first take on better Active Directory support. The main
change for NTDS in the code is that the an top-RDN of CN is used
instead of the old pgpCertID. More changes to come; for example using
and storing the fingerprint.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpg.texi: Add parameters for batch generation of ECC keys.
--
There are parameters required for batch generation of ECC keys which
weren't mentioned in the documentation.
Signed-off-by: Jens Meißner <meissner@b1-systems.de>
* scd/app.c (is_same_serialno): New.
(check_application_conflict): Use this.
(select_application): Ditto.
(app_switch_current_card): Ditto.
* scd/app-openpgp.c (check_keyidstr): Ignore the card version and also
compare case insensitive.
--
This is required because we change what we emit as serialno of OpenPGP
cards but existing keys still use the old form of the serial
number (i.e. with a firmware version).
See-commit: 3a8250c020
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (pref_hint): Change from union to struct and add field
'exact'. Adjust callers.
* g10/pkclist.c (algo_available): Take care of the exact hint.
* g10/sign.c (sign_file): Rework the hash detection from
recipient prefs.
--
This fixes a encrypt+sign case like: One recipient key has SHA512 as
highest ranked hash preference but the the signing key is a 256 bit
curve. Because we don't want to use a truncated hash with ECDSA, we
need to have an exact match - this is in particular important for
smartcard which check that the hash matches the curves.
Signed-off-by: Werner Koch <wk@gnupg.org>
Ported-from-stable: aeed0b93ff
* scd/command.c (reset_notify): Add option --keep-lock.
(do_reset): Add arg keep_lock.
(cmd_lock): Send progress status.
* g10/call-agent.c (agent_scd_apdu): Add more pseudo APDUs.
* g10/card-util.c (send_apdu): Ditto.
(factory_reset): Use lock commands.
--
This is required so that for example Kleopatra does not detect the
RESET and issues a SERIALNO of its own, thus conflicting with our
SERIALNO undefined.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/examples/vsnfd.prf: Rename to VS-NfD.prf.
* doc/examples/Automatic.prf: New.
* doc/Makefile.am (examples): Adjust.
* build-aux/speedo/w32/inst.nsi: Install gpg-check-pattern.exe and 3
example files.
* build-aux/speedo/w32/wixlib.wxs: Add new files.
--
Note that we renamed the existing example profile so that kleopatra
shows a nicer name. In fact the gpg4win installer just copies of
theses file but it is better to maintain them here.
gpg-check-pattern.exe can no be installed because we meanwhile have a
regex lib which works also on Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (parse_list_options): Add "sort-sigs".
(main): Make it the default.
* g10/options.h (LIST_SORT_SIGS): New.
* g10/keylist.c (cmp_signodes): New.
(list_keyblock_print): Sort signatures and factor signature printing
code out to ...
(list_signature_print): new.
--
In particular together with --full-timestamps this makes it easier to
see the history of key signatures and their revocations. The
self-signatures are also printed first. To disable this
--list-options no-sort-sigs
can be used.
Also don't print the annoying "no recocation reason specified"
message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/examples/vsnfd.prf: Remove enable-extended-key-format
--
This is no longer a valid option for gpg-agent because it
is now the default.
(cherry picked from commit d833030f8c)
* g10/options.h (IMPORT_BULK): New.
* g10/import.c (parse_import_options): Add "bulk-import".
* g10/call-keyboxd.c (in_transaction): New var.
(gpg_keyboxd_deinit_session_data): Run a commit if in bulk import
mode.
(create_new_context): Run a begin transaction if in bulk import mode.
--
Initial tests with this option are not very promising. Importing
about 3000 real world keys with --use-keyboxd and full logging took:
real 33m31.724s
user 19m54.265s
sys 2m49.662s
With bulk-import this saves a mere 12%:
real 29m36.542s
user 19m3.391s
sys 2m46.728s
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/backend-sqlite.c (table_definitions): Add column UINO to
userids.
(be_sqlite_local_s): Add fields select_col_uidno and
select_col_subkey.
(run_select_statement): Also select subkey or uidno column.
(be_sqlite_search): Return their values.
(store_into_userid): Store the UIDNO.
* kbx/backend-support.c (be_return_pubkey): Extend PUBKEY_INFO.
--
For an existing database adding the new column to the table userid is
straightforward. However if the original version of the schema used an
integer for the keyid column, that column has likely be renamed. Make
sure that the NOT NULL constraint has also be removed; check the
SQLite documentation on how this can be done.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (send_keypair_info): Emit the algo string as part
of a KEYPAIRINFO.
* scd/command.c (do_readkey): Ditto.
* scd/app-piv.c (do_readkey): Ditto.
* scd/app-nks.c (do_learn_status_core): Ditto.
(struct fid_cache_s): Add field algostr.
(flush_fid_cache): Release it.
(keygripstr_from_pk_file): Fill it and add it to the cache. Use a
single exit label.
* scd/app-help.c (app_help_get_keygrip_string_pk): Add new arg
r_algostr. Change all callers.
--
This is helpful so that callers do not need to parse the key for this
basic information. Use "scd readkey --info-only" to return the info
status line instead of the key material; using just --info returns the
info in addition to the key material.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/backend-support.c (be_return_pubkey): Add args is_ephemeral and
is_revoked. Adjust callers.
* kbx/backend-sqlite.c: Alter table pubkey to add new columns.
(run_select_statement): Add new column to all selects.
(be_sqlite_search): Return the new flags.
--
For existing test databases the new column can be added with:
alter table pubkey add ephemeral integer not null default 0;
alter table pubkey add revoked integer not null default 0;
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gnupg-module-overview.svg: Add examples of GPGME aware
applications
--
Whenever I used this overview I needed to explain what this
meant so giving examples might help a bit and also illustrate
the codesharing between GpgOL, Kleopatra and KMail.
* scd/app-openpgp.c (data_objects): 0x00FA for binary data.
(do_getattr): Parse the data and send it in status lines.
(get_algorithm_attribute_string): New.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpgtar.c (oUtf8Strings): New.
(opts): Add option --utf8-strings.
(parse_arguments): Set option.
* tools/gpgtar.h (opt): Add field utf8strings.
* tools/gpgtar-create.c (name_to_utf8): New.
(fillup_entry_w32): Use that.
(scan_directory): Ditto.
(scan_directory) [W32]: Convert file name to utf8.
(gpgtar_create): Convert pattern.
--
Note that this works only with file names read from a file or if the
specified files on the command line are plain ascii. When recursing
into a directory Unicode file names work again. This limitation is
due to main(int, char**) which can't get the wchar version. We could
fix that but is needs a bit more work in our init code.
GnuPG-bug-id: 4083
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid. Delay setting of homedir until the new
chuid is done.
* sm/gpgsm.c (main): Delay setting of homedir until the new chuid is
done.
* tools/gpg-card.c (oChUid): New.
(opts): Add --chuid.
(changeuser): New helper var.
(main): Implement --chuid.
* tools/gpg-connect-agent.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (oChUid, opts): New option --chuid.
(main): Implement option.
--
This option will at least be useful for Scute.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/keylist.c (list_cert_colon): Emit a new "fp2" record.
(list_cert_raw): Print the SHA2 fingerprint.
(list_cert_std): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gpgrlhelp.c (read_write_history): New.
(gnupg_rl_initialize): Register new function.
* common/ttyio.c (my_rl_rw_history): New var.
(tty_private_set_rl_hooks): Add arg read_write_history.
(tty_read_history): New.
(tty_write_history): New.
* tools/gpg-card.c (HISTORYNAME): New.
(oNoHistory): New enum value.
(opts): New option --no-history.
(cmd_history): New.
(cmds): New command "history".
(interactive_loop): Read and save the history.
* tools/gpg-connect-agent.c (HISTORYNAME): New.
(opts): New option --no-history.
(main): Read and save the history. New command /history.
--
Yeah, finally we have stored history; I should have added this much
earlier.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (write_trust_status): Add arg mbox.
(check_signatures_trust): Appenmd mbox to the status lines.
--
GnuPG-bug-id: 4735
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (check_sig_and_print): Add failsafe check for PK.
Pass KEYBLOCK down do check_signatures_trust. Protect existsing error
ocde in case the signature expired.
* g10/pkclist.c (is_in_sender_list): New.
(check_signatures_trust): Add args keyblock and pk. Add new uid based
checking code.
* g10/test-stubs.c, g10/gpgv.c: Adjust stubs.
--
GnuPG-bug-id: 4735
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.c: Include tlv.h.
(cmd_writecert): Add option --openpgp.
(cmd_readcert): Ditto.
--
We use the CERT object for this and encapsulate the key block in a CMS
object.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/fingerprint.c (gpgsm_get_key_algo_info): Factor code out to ...
(gpgsm_get_key_algo_info2): new.
(gpgsm_pubkey_algo_string): New.
* sm/keylist.c (list_cert_colon): Put curve into field 17
(list_cert_raw): Print the unified key algotithm string instead of the
algo and size.
(list_cert_std): Ditto.
--
It is important to known whether a 256 bit ECC uses a NIST or a
Brainpool curve.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certchain.c (find_up): Disable external lookups in offline mode.
Always allow AKI lookup if CRLs are also enabled.
--
GnuPG-bug-id: 4898
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (get_manufacturer): New..
(do_getattr): Add new attribute "MANUFACTURER".
(do_learn_status): Always print it.
--
This will make it easy to maintain the list of OpenPGP vendors at just
one place.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certchain.c (is_cert_still_valid): Shortcut if tehre is no DP.
* common/audit.c (proc_type_verify): Print "n/a" if a cert has no
distribution point.
* sm/gpgsm.h (opt): Add field enable_issuer_based_crl_check.
* sm/gpgsm.c (oEnableIssuerBasedCRLCheck): New.
(opts): Add option --enable-issuer-based-crl-check.
(main): Set option.
--
If the issuer does not provide a DP and the user wants such an issuer,
we expect that a certificate does not need revocation checks. The new
option --enable-issuer-based-crl-check can be used to revert to the
old behaviour which requires that a suitable LDAP server has been
configured to lookup a CRL by issuer.
Signed-off-by: Werner Koch <wk@gnupg.org>
