* scd/apdu.c (apdu_open_reader): Add an argument APP_EMPTY.
When CCID driver fails to open, try PC/SC if APP is nothing.
* scd/app.c (select_application): Supply arg if APP is nothing.
--
After scanning available card readers by CCID driver, scdaemon should
try PC/SC service if no APP is registered yet. Also, when the slot
is allocated for PC/SC (ccid.handle==NULL), it should not call
ccid_compare_BAI, otherwise scdaemon crashes.
Debian-bug-id: 852702, 854005, 854595, 854616
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (get_status_reader): Add ON_WIRE arg, here.
(ct_get_status, pcsc_get_status_direct, pcsc_get_status_wrapped)
(pcsc_get_status, get_status_ccid, my_rapdu_get_status): Likewise.
(reset_pcsc_reader_wrapped, open_pcsc_reader_wrapped): Follow the
change.
(apdu_get_status_internal): It's lower-level driver which judge
it's not needed. Otherwise, it can't detect the removal.
* scd/ccid-driver.c (ccid_slot_status): After the POWERED_OFF check,
we can skip sending GetSlotStatus packet on wire, when no need.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
Fixes-commit: c8eee4d396a751d41fd1ee1e1b87b851fca172a
* scd/apdu.c(struct reader_table_s): Add require_get_status.
(apdu_connect): Change return value meaning. Call apdu_reset here.
* scd/app.c (app_new_register): Add require_get_status.
(select_application): Use the return value of apdu_connect.
(scd_update_reader_status_file): Call update_fdset_for_usb with
checking all_have_intr_endp.
(app_list_start, app_list_finish): Remove.
* scd/ccid-driver.c (struct ccid_driver_s): Add transfer.
(intr_cb): Don't call libusb_transfer in this callback.
(ccid_require_get_status): New.
(do_close_reader): Call libusb_transfer here.
* scd/scdaemon.c (update_fdset_for_usb): Remove the first argument.
--
With Gnuk Token, it works fine as expected. With Gemalto reader,
intr_cb is not called when card is removed. So, the macro
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP is not defined yet.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (apdu_dev_list_finish): Don't call ccid_dev_scan_finish
with no table.
(apdu_open_reader): Only increment when it's zero.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (new_reader_slot): Lock is now in apdu_dev_list_start.
(close_pcsc_reader_direct, close_ccid_reader): RDRNAME is handled...
(apdu_close_reader): ... by this function now.
(apdu_prepare_exit): Likewise.
(open_ccid_reader): Open with dev_list.
(apdu_dev_list_start, apdu_dev_list_finish): New.
(apdu_open_one_reader): New.
(apdu_open_reader): Support multiple readers.
* scd/app.c (select_application): With SCAN, opening all readers
available, and register as new APP.
(app_write_learn_status): app->ref_count == 0 is valid for APP which is
not yet used.
(app_list_start, app_list_finish): New.
* scd/ccid-driver.c (struct ccid_driver_s): Remove RID and BCD_DEVICE.
Add BAI.
(parse_ccid_descriptor): BCD_DEVICE is now on the arguments.
(ccid_dev_scan, ccid_dev_scan_finish): New.
(ccid_get_BAI, ccid_compare_BAI, ccid_open_usb_reader): New.
(ccid_open_reader): Support multiple readers.
(ccid_set_progress_cb, ccid_close_reader): No RID any more.
--
With this change, multiple readers/tokens are supported by the internal
CCID driver of GnuPG. Until the changes of upper layers (scdaemon,
gpg-agent, and gpg front end), only a single reader is used, though.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (reader_table_lock, apdu_init): New.
(new_reader_slot): Serialize by reader_table_lock.
* scd/app.c (lock_app, unlock_app, app_new_register): Fix error code
usage.
(initialize_module_command): Call apdu_init.
* scd/scdaemon.c (main): Handle error for initialize_module_command.
--
This is a long standing bug. There are two different things; The
serialization of allocating a new SLOT, and the serialization of using
the SLOT. The latter was implemented in new_reader_slot by lock_slot.
However, the former was not done. Thus, there was a possible race where
a same SLOT is allocated to multiple threads.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (struct reader_table_s): Remove any_status, last_status,
status, and change_counter field.
(new_reader_slot, dump_reader_status, ct_activate_card, open_ct_reader)
(connect_pcsc_card, open_pcsc_reader_direct, open_pcsc_reader_wrapped)
(open_ccid_reader, apdu_reset): Follow the change.
(ct_dump_reader_status): Remove.
(apdu_get_status_internal, apdu_get_status): Remove CHANGED arg.
(apdu_connect): Follow the change.
* scd/command.c (struct vreader_s): Remove reset_failed, any, and
changed field.
(cmd_getinfo, update_reader_status_file): Follow the change.
--
In the past, scdaemon monitors card insertion (as well as removal), so
the code has been complicated, and there has been duplication in two
layers. Now, it only monitors card removal, it's now simplified.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (send_le): Fix the size, adding two for status
bytes to Le.
--
This is long standing bug. So far, Le was not exact value.
Since forthcoming change will introduce exact value of expected length
of response data, this change is needed.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (pcsc_vendor_specific_init): Only check vender ID.
--
Some other products by Cherry works with pinpad, although it only works
for smaller keys (RSA 1024). TPDU support is good for larger keys.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (pcsc_error_to_sw): map PCSC_E_NO_SERVICE and
PCSC_E_SERVICE_STOPPED to the internal SW_HOST_NO_READER error code.
--
Signed-off-by: Daniel Hoffend <dh@dotlan.net>
GnuPG-bug-id: 2167
In Windows 8 (and later), PC/SC service only runs when reader/token is
plugged in. After its removal, it returns PCSC_E_NO_SERVICE error.
This error should be handled as no reader. This comment is by gniibe.
* scd/apdu.c (apdu_close_reader): Call CLOSE_READER method even if we
got an error from apdu_disconnect.
* scd/app-common.h (no_reuse): Remove.
* scd/app.c (application_notify_card_reset): Deallocate APP here.
(select_application, release_application): Don't use NO_REUSE.
--
Reproducible scenario: Invoke gpg --card-edit session from a terminal.
Invoke another gpg --card-edit session from another. Remove a token.
Insert a token again. Type RET on both terminals. One of terminal
answers "Conflicting usage".
Perhaps, having NO_REUSE field was to avoid race conditions. Now,
APP can be safely deallocated by application_notify_card_reset.
Thanks to the2nd.
* scd/adpu.c (pcsc_pinpad_verify, pcsc_pinpad_modify): Bigger buffer
for TPDU card reader.
--
GnuPG-bug-id: 2003, 2004
This is needed for PC/SC on Debian Jessie. Note that it's not only
for Cherry ST-2000, but also, for any TPDU card readers.
* scd/apdu.c (pcsc_vendor_specific_init): Set pinmax to 15.
* scd/ccid-driver.c (ccid_transceive_secure): Add zero for the
template of APDU.
--
GnuPG-bug-id: 2003, 2004
* scd/apdu.c (open_pcsc_reader_direct): Partial string match.
--
The card reader name by PC/SC service might include USB bus,
which varies (on some platform like GNU/Linux). Thus, it's
better to match partial string.
Original patch was submitted by anstein. I changed it to fallback to
the first reader if no match found.
Note that we need to change pcsc-wrapper.c in 2.0 backport.
GnuPG-bug-id: 1618, 1930
* scd/apdu.c (send_le): Bug fix for not append Z when lc<0&&le<0.
* scd/app-common.h (struct app_ctx_s): Use bit fields for flags.
* scd/ccid-driver.c (CCID_MAX_BUF): New. Only for OpenPGPcard.
(struct ccid_driver_s): New field of max_ccid_msglen.
Remove ifsd field.
(parse_ccid_descriptor): Initialize max_ccid_msglen.
(ccid_transceive_apdu_level): Implement sending extended APDU in
chain of CCID message.
--
With this patch, we won't need PC/SC library/service any more.
GnuPG-bug-id: 1947
* common/host2net.h (buf16_to_ulong, buf16_to_uint): New.
(buf16_to_ushort, buf16_to_u16): New.
(buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New.
--
Commit 91b826a388 was not enough to
avoid all sign extension on shift problems. Hanno Böck found a case
with an invalid read due to this problem. To fix that once and for
all almost all uses of "<< 24" and "<< 8" are changed by this patch to
use an inline function from host2net.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (new_reader_slot): Acquire lock.
(open_ct_reader, open_pcsc_reader_direct, open_pcsc_reader_wrapped)
(open_ccid_reader, open_rapdu_reader): Release lock.
(lock_slot, trylock_slot, unlock_slot): Move more to the top.
--
Fixes a test case of:
No libpcsclite1 installed.
Run gpg-agent
Run command "gpg-connect-agent learn /bye" with no card/token
Sometimes it fails: ERR 100663356 Not supported <SCD>
While it should be always: ERR 100663404 Card error <SCD>
(cherry picked from commit 4f557cb9c2)
Resolved conflicts:
scd/apdu.c: pth/npth changes. Move lock helpers to the top.
Take care of removed pcsc_no_service.
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
* scd/apdu.c (check_pcsc_pinpad): Set ->minlen and ->maxlen only when
those are specified.
(pcsc_pinpad_modify): Remove old check code.
--
GnuPG-bug-id: 1549
* scd/apdu.c (open_pcsc_reader_direct): Don't call
pcsc_vendor_specific_init here, but...
(connect_pcsc_card): Call it here.
--
Thanks to Martin Wolters for the bug report.
* scd/ccid-driver.c: Move vendor and product ids to ...
* scd/ccid-driver.h: here.
* scd/apdu.c (CCID_DRIVER_INCLUDE_USB_IDS): Define to include ids.
(pcsc_vendor_specific_init): Use vendor and product id macros.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (CM_IOCTL_GET_FEATURE_REQUEST): Use SCARD_CTL_CODE.
(SCARD_CTL_CODE): Define if not defined.
(reader_table_s): Add is_spr532.
(new_reader_slot): Clear it.
(check_pcsc_pinpad): Set it.
(pcsc_pinpad_verify, pcsc_pinpad_modify): Add fix for SPR532.
Signed-off-by: Werner Koch <wk@gnupg.org>
