1
0
mirror of git://git.gnupg.org/gnupg.git synced 2024-12-22 10:19:57 +01:00

107 Commits

Author SHA1 Message Date
Werner Koch
73c03e0232
tools: Extend gpg-check-pattern.
* tools/gpg-check-pattern.c: Major rewrite.
--
Signed-off-by: Werner Koch <wk@gnupg.org>

Here is a simple pattern file:

====================
# Pattern to reject passwords which do not comply to
#   - at least 1 uppercase letter
#   - at least 1 lowercase letter
#   - at least one number
#   - at least one special character
# and a few extra things to show the reject mode

# Reject is the default mode, ignore case is the default
#[reject]
#[icase]

# If the password starts with "foo" (case insensitive) it is rejected.
/foo.*/

[case]

# If the password starts with "bar" (case sensitive) it is rejected.
/bar.*/

# Switch to accept mode: Only if all patterns up to the next "accept"
# or "reject" tag or EOF match, the password is accepted.  Otherwise
# the password is rejected.

[accept]

/[A-Z]+/
/[a-z]+/
/[0-9]+/
/[^A-Za-z0-9]+/
=================

Someone™ please write regression tests.
2021-07-29 11:33:24 +02:00
Werner Koch
209b7113f3
tools: Remove the symcryptrun tool.
* tools/symcryptrun.c: Remove.
* tools/Makefile.am: Ditto.
* doc/tools.texi: Remove man page.
* configure.ac: Remove build option and tests used only by this tool.
* Makefile.am (AM_DISTCHECK_CONFIGURE_FLAGS): Do not build
symcryptrun.
--

symcryptrun is too ancient to be of any use and has not been tested in
many years.  Thus we should not distribute it anymore.
2021-02-09 18:42:25 +01:00
Werner Koch
34e7703a96
gpgtar,w32: Handle Unicode file names.
* tools/gpgtar.c (oUtf8Strings): New.
(opts): Add option --utf8-strings.
(parse_arguments): Set option.
* tools/gpgtar.h (opt): Add field utf8strings.
* tools/gpgtar-create.c (name_to_utf8): New.
(fillup_entry_w32): Use that.
(scan_directory): Ditto.
(scan_directory) [W32]: Convert file name to utf8.
(gpgtar_create): Convert pattern.
--

Note that this works only with file names read from a file or if the
specified files on the command line are plain ascii.  When recursing
into a directory Unicode file names work again.  This limitation is
due to  main(int, char**) which can't get the wchar version.  We could
fix that but is needs a bit more work in our init code.

GnuPG-bug-id: 4083
Signed-off-by: Werner Koch <wk@gnupg.org>
2020-08-21 21:28:28 +02:00
Werner Koch
ba873216ff
gpgtar: Add dummy option --tar
--
GnuPG-bug-id: 3772

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-08-20 16:11:58 +02:00
Werner Koch
6bcb609e1b
Add --chuid to gpg, gpg-card, and gpg-connect-agent.
* g10/gpg.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid.  Delay setting of homedir until the new
chuid is done.
* sm/gpgsm.c (main): Delay setting of homedir until the new chuid is
done.
* tools/gpg-card.c (oChUid): New.
(opts): Add --chuid.
(changeuser): New helper var.
(main): Implement --chuid.
* tools/gpg-connect-agent.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid.
--

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-08-14 12:19:11 +02:00
Werner Koch
d10f45184c
gpgconf: New option --chuid.
* tools/gpgconf.c (oChUid, opts): New option --chuid.
(main): Implement.
--

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-08-06 16:03:57 +02:00
Werner Koch
d70b8769c8
Support a history file in gpg-card and gpg-connect-agent.
* common/gpgrlhelp.c (read_write_history): New.
(gnupg_rl_initialize): Register new function.
* common/ttyio.c (my_rl_rw_history): New var.
(tty_private_set_rl_hooks): Add arg read_write_history.
(tty_read_history): New.
(tty_write_history): New.
* tools/gpg-card.c (HISTORYNAME): New.
(oNoHistory): New enum value.
(opts): New option --no-history.
(cmd_history): New.
(cmds): New command "history".
(interactive_loop): Read and save the history.
* tools/gpg-connect-agent.c (HISTORYNAME): New.
(opts): New option --no-history.
(main): Read and save the history.  New command /history.
--

Yeah, finally we have stored history; I should have added this much
earlier.

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-07-02 15:48:55 +02:00
Daniel Kahn Gillmor
0904b8ef34 Spelling cleanup.
No functional changes, just fixing minor spelling issues.

---

Most of these were identified from the command line by running:

  codespell \
    --ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
    --skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
    doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
    NEWS README README.maint TODO

Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
2020-02-18 18:07:46 -05:00
Werner Koch
e0d9181ad1
tools: Let watchgnupg determine the socket name via gpgconf.
* tools/watchgnupg.c: Include sys/wait.h.
(GNUPG_DEF_COPYRIGHT_LINE): Add a default value for standalone
building.
(get_logname): New.
(main): Use a default socket name and add option --homedir.
--

This is quite convenient and saves a lot of typing or shell alias
definitions.

Signed-off-by: Werner Koch <wk@gnupg.org>
2020-01-20 16:50:56 +01:00
Werner Koch
0611f548bc
tools: New option --keyboxd for gpg-connect-agent.
* configure.ac: New option --keyboxd-pgm.
(KEYBOXD_NAME, KEYBOXD_DISP_NAME): New ac_defines.
* common/util.h: Add substitutes for new error codes.
(GNUPG_MODULE_NAME_KEYBOXD): New.
* common/homedir.c (gnupg_module_name): Support
GNUPG_MODULE_NAME_KEYBOXD.
* common/asshelp.c (SECS_TO_WAIT_FOR_KEYBOXD): New.
(wait_for_sock): Support keyboxd.
(start_new_service): Ditto.
(start_new_keyboxd): New.
* tools/gpg-connect-agent.c: New options --keyboxd and
--keyboxd-program.
(start_agent): Implement new option.
--

This change allows us to test the new keyboxd using our standard
helper.  It also provides the necessary code to start keyboxd on the
fly.

Signed-off-by: Werner Koch <wk@gnupg.org>
2019-08-06 14:57:07 +02:00
NIIBE Yutaka
eaf3b89d11 doc: Add a section for gpg-check-pattern.
* doc/Makefile.am: Add gpg-check-pattern.1.
* doc/tools.texi (GPG-CHECK-PATTERN): New.

--

GnuPG-bug-id: 4031
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2019-06-04 08:49:05 +09:00
Werner Koch
a4be077abd
gpgconf: Support --homedir for --launch.
* tools/gpgconf-comp.c (gpg_agent_runtime_change): Simplify because
gnupg_homedir already returns abd absolute name.
(scdaemon_runtime_change): Ditto.
(dirmngr_runtime_change): Ditto.
(gc_component_launch): Support --homedir.
--

GnuPG-bug-id: 4496
Signed-off-by: Werner Koch <wk@gnupg.org>
2019-05-15 08:52:21 +02:00
Daniel Kahn Gillmor
9662538be6 doc: correct documentation for gpgconf --kill
* doc/tools.texi(gpgconf): Correct documentation for gpgconf --kill.

Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
2019-05-10 12:41:38 -04:00
Werner Koch
b3a7a51407
gpgtar: Make option -C work for archive creation.
* tools/gpgtar-create.c (gpgtar_create): Switch to the -C directory.
--

The -C option is pretty useful given that pattern are always relative
to the current directory.  In contrast to GNU tar, the switching is
done only once.

Signed-off-by: Werner Koch <wk@gnupg.org>
2019-03-06 20:08:26 +01:00
Daniel Kahn Gillmor
ef540d1af0 doc: fix spelling mistakes
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
2018-10-24 14:39:56 -04:00
Werner Koch
70f26e4263
doc: Typo fixes
--

Reported-by: Claus Assmann <ca+gnupg-users@esmtp.org>
Signed-off-by: Werner Koch <wk@gnupg.org>
2018-06-06 17:25:51 +02:00
Werner Koch
482e000b8a
conf: New option --status-fd.
* tools/gpgconf.c (oStatusFD): New const.
(opts): New option --status-fd.
(statusfp): New var.
(set_status_fd): New.
(gpgconf_write_status): New.
(gpgconf_failure): New.
(main): Set status fd and replace exit by gpgconf_failure.
* tools/gpgconf-comp.c: Repalce exit by gpgconf_failure.
(gc_process_gpgconf_conf): Print a few warning status messages.

Signed-off-by: Werner Koch <wk@gnupg.org>
2017-12-18 17:46:05 +01:00
Werner Koch
1b6d1ac976
doc: Add man page for gpgtar
--

This also removes the documentation for gpg-zip which is not
distributed anymore.

Signed-off-by: Werner Koch <wk@gnupg.org>
2017-11-15 10:17:17 +01:00
Werner Koch
0a8e20c4c6
sm: Always print the keygrip in colon mode.
* sm/keylist.c (list_cert_colon): Always print the keygrip as
described in the manual.

Signed-off-by: Werner Koch <wk@gnupg.org>
2017-08-08 13:05:50 +02:00
Marcus Brinkmann
877a321d01 doc: Document gnupg version requirement for gpg-preset-passphrase.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2331
2017-07-13 17:12:42 +02:00
Werner Koch
2312248b2e
gpgconf: Allow "all" for --launch, --kill, and --reload.
* tools/gpgconf-comp.c (gc_component_launch): Allow -1 for COMPONENT.
(gc_component_kill): Ditto.
(gc_component_reload): For robustness change the condition to < 0.
* tools/gpgconf.c (main) <aLaunch, aKill, aReload>: Support argument
"all".

Signed-off-by: Werner Koch <wk@gnupg.org>
2017-01-18 10:07:53 +01:00
Werner Koch
2baba11fad
doc: Update man page for watchgnupg
--

Signed-off-by: Werner Koch <wk@gnupg.org>
2017-01-09 08:54:45 +01:00
Werner Koch
76cd64a5ba
gpgconf: New command --apply-profile.
* tools/gpgconf.c (aApplyProfile): New.
(opts): New command --apply-profile.
(main): Implement that command.
* tools/gpgconf-comp.c (option_check_validity): Add arg VERBATIM.
(change_options_program): Ditto.
(change_one_value): Ditto.
(gc_component_change_options): Ditto.
(gc_apply_profile): New.

--

Here is an example for a profile

--8<---------------cut here---------------start------------->8---
# foo.prf - Sample profile

[gpg]
compliance de-vs
default-new-key-algo brainpoolP256r1+brainpoolP256r1

[gpgsm]
enable-crl-checks

[gpg-agent]
default-cache-ttl 900
max-cache-ttl [] 3600
no-allow-mark-trusted
no-allow-external-cache
enforce-passphrase-constraints
min-passphrase-len 9
min-passphrase-nonalpha 0

[dirmngr]
keyserver hkp://keys.gnupg.net
allow-ocsp
--8<---------------cut here---------------end--------------->8---

Note that flags inside of brackets are allowed after the option name.
The only defined flag for now is "[default]".  In case the value
starts with a bracket, it is possible to insert "[]" as a nop-flag.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-12-16 16:05:02 +01:00
Werner Koch
c45ca316a5
dirmngr: Improve downloading of swdb.lst.
* dirmngr/loadswdb.c (time_of_saved_swdb): Aslo return the "verified"
timestamp.
(dirmngr_load_swdb): Avoid unnecessary disk or network access witout
FORCE.  Do not update swdb.lst if it did not change.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-11-17 10:08:20 +01:00
Werner Koch
d10b67b9bc
gpgconf: Add a new field to the --query-swdb output.
* tools/gpgconf.c (query_swdb): Insert new field with the installed
version.  Check that the supplied version does not contain a colon.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-11-03 10:58:19 +01:00
Werner Koch
0ed6a6df5a
gpgconf: Add command --query-swdb.
* tools/gpgconf.c (aQuerySWDB): New.
(opts): Add --query-swdb.
(valid_swdb_name_p): New.
(query_swdb): New.
(main): Implement command --query-swdb.
--

Right now this command is not very useful because dimngr has not yet
been changed to create the swdb.lst.  For manual tests the swdb.lst
file from the Net can be used with these additional lines:

  .filedate 20161102T130337
  .verified 20161102T150000
2016-11-02 17:58:11 +01:00
Ineiev
8078d8246f doc: Do not end section names with "." 2016-09-20 16:15:19 +09:00
Werner Koch
81cb71ab4d
doc: Fix fix "Not(e) that you can(not) abbreviate".
--

The commands --help, --version, --dump-options are special in that
they can't be abbreciated on the command line.  This is to avoid
problems with regular options with the same prefix.

Fixes-commit: 0a27d8a57c4c990fcada4278a1ce2e6fc9043e9
Signed-off-by: Werner Koch <wk@gnupg.org>
2016-09-20 08:56:35 +02:00
Ineiev
0eaab1af48 doc: Fix full stops.
* doc/gpg-agent.texi, doc/gpg.texi, doc/gpgsm.texi,
doc/instguide.texi, doc/scdaemon.texi, doc/specify-user-id.texi,
doc/tools.texi: Fix.
2016-09-20 13:02:39 +09:00
Ineiev
32bcf8b73e doc: Fix spacings.
* doc/debugging.texi, doc/dirmngr.texi, doc/gpg-agent.texi,
doc/gpg.texi, doc/tools.texi: Fix.
2016-09-20 11:23:24 +09:00
Ineiev
377624207e doc: Improve markup.
* doc/gpg-agent.texi, doc/gpg.texi, doc/gpgsm.texi,
doc/howto-create-a-server-cert.texi, doc/scdaemon.texi,
doc/specify-user-id.texi, doc/tools.texi: Fix.
2016-09-20 11:06:57 +09:00
Ineiev
f25e04005a doc: Fix mistakes.
* doc/dirmngr.texi, doc/gpg.texi, doc/gpgsm.texi,
doc/howto-create-a-server-cert.texi,
doc/scdaemon.texi, doc/tools.texi: Fix.
2016-09-20 10:51:35 +09:00
Ineiev
825c1dfb3e doc: Eliminate inconsistent UK English.
* doc/dirmngr.texi, doc/gpg-agent.texi, doc/scdaemon.texi,
doc/tools.texi: Fix.
2016-09-20 10:16:21 +09:00
Ineiev
f32689f833 doc: Use the right reference commands.
* doc/debugging.texi, doc/gpg-agent.texi, doc/gpg.texi, doc/gpgsm.texi,
doc/tools.texi: Fix.
2016-09-20 10:14:22 +09:00
Ineiev
20a27d8a57 doc: Fix "Not(e) that you can(not) abbreviate".
* doc/dirmngr.texi, doc/gpg-agent.texi, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi: Fix.
2016-09-20 09:59:23 +09:00
Ineiev
fa346508fe doc: Fix typos.
* doc/debugging.texi, doc/dirmngr.texi, doc/glossary.texi
* doc/gpg-agent.texi, doc/gpg.texi, doc/gpgsm.texi
* doc/instguide.texi, doc/opt-homedir.texi, doc/scdaemon.texi
* doc/specify-user-id.texi, doc/tools.texi: Fix.
2016-09-20 09:56:22 +09:00
Werner Koch
2aa0701013
common: Add a default socket name feature.
* common/logging.c (log_set_socket_dir_cb): New.
(socket_dir_cb): New.
(set_file_fd): Allow "socket://".
(fun_writer): Implement default socket name.
* common/init.c (_init_common_subsystems): Register default socket.
--

This change allows the use of

log-file socket://

in any configuration file.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-08-29 11:51:00 +02:00
Daniel Kahn Gillmor
dc107b7850 More cleanup of "allow to".
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
  common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
  dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
  doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
  doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
  g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
  m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
  po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
  po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
  po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
  po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
  scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
  sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
  with clearer text.

In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something.  When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.

These changes should make the language a bit clearer.

Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
2016-08-03 16:55:33 +02:00
Daniel Kahn Gillmor
cd45cf782b Fix spelling and grammar.
* agent/learncard.c: s/coccured/occurred/
* doc/dirmngr.texi: s/ommitted/omitted/, s/orginally/originally/,
  s/reponses/responses/i
* doc/gpg-agent.texi, doc/dirmngr.texi, doc/gpg.texi: Fix "allows
  to" to more conventional english usage.
* doc/tools.texi, g10/gpgcommpose.c, tests/openpgp/armor.scm,
  tests/openpgp/armor.test: s/occured/occurred/
* tools/gpgsplit.c: s/calcualting/calculating/
* sm/server.c: s/formated/formatted/

Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
2016-08-03 16:54:01 +02:00
Werner Koch
7732b33288
gpgconf: Enhance --list-dirs.
* tools/gpgconf.c (main) <aListDir>: Factor code out to ...
(list_dirs): new.  Rewrite to use a table.  Allow selection of a
items.  Add "agent-ssh-socket".
--

This change makes the use of gpgconf in scripts easier.  For example,
to set the envvar with the name of the socket used by ssh, it is now
possible to do this:

  SSH_AUTH_SOCK="$(gpgconf --list-dirs agent-ssh-socket)"

which guarantees that the right name is used.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-07-11 13:06:48 +02:00
Werner Koch
cf4910419e
gpgconf: New commands --create-socketdir and --remove-socketdir.
* tools/gpgconf.c: Include unistd.h.
(aCreateSocketDir, aRemoveSocketDir): New.
(opts): Add --create-socketdir and --remove-socketdir.
(main): Implement them.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-06-08 14:04:47 +02:00
Werner Koch
eb9c021631
tools: Remove gpgkey2ssh.
* tools/gpgkey2ssh.c: Remove.
* tools/Makefile.am (bin_PROGRAMS): Ditto.
--

Also remove it form the docs.

Signed-off-by: Werner Koch <wk@gnupg.org>
2016-01-09 11:28:42 +01:00
Neal H. Walfield
2b0e0a53b4 doc: Note that gpgkey2ssh is deprecated.
* doc/tools.texi (gpgkey2ssh): Note that gpgkey2ssh is deprecated.

--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
2015-11-05 14:09:00 +01:00
Neal H. Walfield
2b27acc343 doc: Add documentation for gpgkey2ssh.
* doc/tools.texi: Add documentation for gpgkey2ssh.

--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Co-authored-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
GnuPG-bug-id: 1067
Debian-bug-id 380241
2015-11-05 13:57:32 +01:00
Daniel Kahn Gillmor
1f872cb4ad
Fix typos
--
2015-10-28 10:20:17 +01:00
Daniel Kahn Gillmor
1be2cebf7f drop long-deprecated gpgsm-gencert.sh
* tools/gpgsm-gencert.sh: remove deprecated script entirely.  It is
   fully replaced by gpgsm --gen-key
 * doc/tools.texi: remove gpgsm-gencert.sh documentation
 * .gitignore: no longer ignore gpgsm-gencert.sh manpage
 * doc/Makefile.am: quit making the manpage
 * tools/Makefile.am: quit distributing the script
 * doc/howto-create-a-server-cert.texi: overhaul documentation to use
   gpgsm --gen-key and tweak explanations

--

The commit deprecating gpgsm-gencert.sh
(81972ca7d53ff1996e0086702a09d4405bdc2a7e) dates back exactly 6 years.

 https://codesearch.debian.net/results/gpgsm-gencert.sh

suggests that in all of debian it is only referenced in documentation
(for poldi and scute) and example files (libept), and isn't actually
used directly anywhere.

Furthermore, trying to use gpgsm-gencert.sh to make a simple webserver
certificate-signing request failed for me, following the examples in
doc/howto-create-a-server-cert.texi exactly.

It's time we ripped off this band-aid :)

Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
2015-07-03 22:21:52 +02:00
Werner Koch
25331bba55
doc: Do not used fixed file names in the manuals.
* doc/mkdefsinc.c: New.
* doc/Makefile.am: Include cmacros.am.
(EXTRA_DIST): Add mkdefsinc.c defsincdate.
(BUILT_SOURCES): Add defsincdate
(CLEANFILES): Add mkdefsinc and defs.inc.
(mkdefsinc): New rule.
(yat2m-stamp): Depend on defs.inc.
($(myman_pages) gnupg.7): Ditto.
(gnupg.texi): Remove rule to touch itself.
(dist-hook): New.
(defsincdate): New.
(defs.inc): New.
* doc/gnupg.texi: Remove inclusion of version.texi.  Include defs.inc.
Also include defs.inc in all files used to build man files.  Change
fixed directory names to those from defs.inc.
--

GnuPG-bug-id: 1661
Signed-off-by: Werner Koch <wk@gnupg.org>
2015-06-09 21:29:15 +02:00
Werner Koch
abbefdd04d
doc: Change the manual source to be only for GnuPG 2.1
Signed-off-by: Werner Koch <wk@gnupg.org>
2015-06-08 19:27:08 +02:00
Werner Koch
da4db172f6 doc: Fix some typos and add missing options.
--

GnuPG-bug-id: 1602

I added options shown with --help but missing in the man page.
However, --help won't show everything listed in the man age and
frankly there are even more options not listed anywhere (to see them
use --dump-options).
2015-01-22 17:49:55 +01:00
Werner Koch
7aee3579be Add option --no-autostart.
* g10/gpg.c: Add option --no-autostart.
* sm/gpgsm.c: Ditto.
* g10/options.h (opt): Add field autostart.
* sm/gpgsm.h (opt): Ditto.
* g10/call-agent.c (start_agent): Print note if agent was not
autostarted.
* sm/call-agent.c (start_agent): Ditto.
* g10/call-dirmngr.c (create_context): Likewise.
* sm/call-dirmngr.c (start_dirmngr_ext): Ditto.

Signed-off-by: Werner Koch <wk@gnupg.org>
2014-11-28 09:44:19 +01:00