* scd/apdu.c (pcsc_dword_t): New. It was named as DWORD (double-word)
when a word was 16-bit.
(struct reader_table_s): Fixes for types.
(struct pcsc_readerstate_s) [__APPLE__]: Enable #pragma pack(1).
Throughout: Fixes for types.
* scd/pcsc-wrapper.c: Likewise.
--
Problem reported for 1.4.x by the issue 1358.
* scd/apdu.c (pcsc_pinpad_verify, pcsc_pinpad_modify): Default value
of maxlen for pinpad input is now 15 (was: 25).
* scd/ccid-driver.c (ccid_transceive_secure): Likewise.
--
For newer PC/SC, it is better to use FEATURE_GET_TLV_PROPERTIES to get
bMaxPINSize.
* scd/iso7816.h (struct pininfo_s): Rename from iso7816_pininfo_s.
Change meaning of MODE.
(pininfo_t): Rename from iso7816_pininfo_t.
* scd/sc-copykeys.c: Include "iso7816.h".
* scd/scdaemon.c, scd/command.c: Likewise.
* scd/ccid-driver.c: Include "scdaemon.h" and "iso7816.h".
(ccid_transceive_secure): Follow the change of PININFO_T.
* scd/app.c: Include "apdu.h" after "iso7816.h".
* scd/iso7816.c (iso7816_check_keypad, iso7816_verify_kp)
(iso7816_change_reference_data_kp): Follow the change of API.
* scd/apdu.c (struct reader_table_s): Change API of CHECK_KEYPAD,
KEYPAD_VERIFY, KEYPAD_MODIFY to have arg of PININFO_T.
(check_pcsc_keypad, check_ccid_keypad): Likewise.
(apdu_check_keypad, apdu_keypad_verify, apdu_keypad_modify): Likewise.
(pcsc_keypad_verify, pcsc_keypad_modify, ct_send_apdu)
(pcsc_send_apdu_direct, pcsc_send_apdu_wrapped, pcsc_send_apdu)
(send_apdu_ccid, ccid_keypad_operation, my_rapdu_send_apdu, send_apdu)
(send_le): Follow the change of API.
* scd/apdu.h (apdu_check_keypad, apdu_keypad_verify)
(apdu_keypad_modify): Change the API.
* scd/app-dinsig.c, scd/app-nks.c, scd/app-openpgp.c: Follow the
change.
* scd/apdu.c (pcsc_no_service): Remove.
(open_pcsc_reader_direct, open_pcsc_reader_wrapped): Remove
pcsc_no_service support.
(apdu_open_reader): Remove R_NO_SERVICE.
* scd/apdu.h (apdu_open_reader): Remove R_NO_SERVICE.
* scd/command.c (reader_disabled): Remove.
(get_current_reader): Follow the change of R_NO_SERVICE.
(open_card, cmd_serialno, scd_command_handler): Remove reader_disabled
support.
* scd/sc-copykeys.c (main): Follow the change of R_NO_SERVICE.
--
Daemon should handle all possible cases. Even if such a difficult
case like reader_disabled, it should not exit.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
When the KILLSCD command had been sent a race condition would occur
causing PID -1 getting killed, which on Linux seems to terminate all
applications for the current user.
* scd/apdu.c (ccid_keypad_operation): Rename from ccid_keypad_verify.
(open_ccid_reader): Use ccid_keypad_operation for verify and modify.
* scd/ccid-driver.c (VENDOR_VASCO, VASCO_920): New.
(ccid_transceive_apdu_level): Permit sending packet where
apdulen <= 289. Support receiving packets in a chain.
(ccid_transceive_secure): Maximum is 15 for VASCO DIGIPASS 920.
Support keypad_modify method such as CHANGE_REFERENCE_DATA: 0x24.
* scd/apdu.c (apdu_connect): Do not test for zero atrlen.
--
When gpg-agent prompts for insertion of a card this error would be
returned.
Co-authored-by: Ben Kibbey <bjk@luxsci.net>
* scd/apdu.c (apdu_connect): Return status codes for no card available
and inactive card.
* scd/command.c (TEST_CARD_REMOVAL): Also test for GPG_ERR_CARD_RESET.
(open_card): Map apdu_connect status to GPG_ERR_CARD_RESET.
* apdu.c (pcsc_keypad_verify): Have dummy Lc field with value 0.
(pcsc_keypad_modify): Likewise.
(pcsc_keypad_modify): It's only for ISO7816_CHANGE_REFERENCE_DATA.
bConfirmPIN value is determined by the parameter p0.
* app-openpgp.c (do_change_pin): The flag use_keypad should be 0 when
reset_mode is on, or resetcode is on. use_keypad only makes sense for
iso7816_change_reference_data_kp.
* iso7816.h (iso7816_put_data_kp): Remove.
(iso7816_reset_retry_counter_kp): Remove.
(iso7816_reset_retry_counter_with_rc_kp): Remove.
(iso7816_change_reference_data_kp): Add an argument: IS_EXCHANGE.
* iso7816.c (iso7816_put_data_kp): Remove.
(iso7816_reset_retry_counter_kp): Remove.
(iso7816_reset_retry_counter_with_rc_kp): Remove.
(iso7816_change_reference_data_kp): Add an argument: IS_EXCHANGE.
Before this change, it is layered like following:
iso7816_verify
iso7816_verify_kp
apdu_send_simple, apdu_send_simple_kp
...
After this change, it will be layered like:
iso7816_verify iso7816_verify_kp
apdu_send_simple apdu_keypad_verify
...
and apdu_send_simple_kp will be deprecated.
For PC/SC API, we use:
SCardControl API to compose CCID PC_to_RDR_Secure message
SCardTransmit API to compose CCID PC_to_RDR_XfrBlock message
Considering the support of PC/SC, we have nothing to share between _kp
version of iso7816_* and no _kp version.
This solves a problem where ccid was used, the card unplugged and then
scdaemon tries to find a new (plugged in) reader and thus will
eventually try PC/SC over and over again.
Also added an explicit --kill command to gpgconf.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
progress_cb and progress_cb_arg.
(ccid_set_progress_cb): New.
(print_progress): New.
(ccid_transceive): Call print_progress for wait time extensions.
* apdu.c (struct reader_table_s): Add field set_progress_cb.
(new_reader_slot): Clear that field.
(open_ccid_reader): Set it to ..
(set_progress_cb_ccid_reader): ... new fucntion.
* app.c (print_progress_line): New.
(lock_reader): Add arg CTRL to set a progress callback and
change all callers to provide it.
(unlock_reader): Remove the progress callback.
