--
When using tags (e.g. GNU global) to navigate the source code it is
way easier to have the documentation close to the function we are
looking at. Having the documentation in the header file would require
an extra manual lookup to understand the function.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c: Allow arg RET_KEYBLOCK to be NULL.
--
This change adds the expected behavior for the getkey_next function
to fix this NULL de-ref.
GnuPG-bug-id: 2212
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (struct pubkey): Rename to pubkey_s.
(pubkey_t): New. Change all struct pubkey_s to use this type.
* g10/getkey.c (get_pubkeys): Rename arg keys to r_keys.
--
It is common in GnuPG to use a suffix of _s for struct names. There
is no technical need for this (actually this pattern comes from pre
ANSI C compilers which had no separate namespaces) but it avoid
surprises when reading the code.
Adding the pubkey_t type is mainly to improve font locking by using
the common suffix _t for a typedefed type.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (struct result): Move from here...
* g10/keydb.h (struct pubkey): ... to here. Update users.
* g10/gpg.c (check_user_ids): Move from here...
* g10/getkey.c (get_pubkeys): ... to here. Update users. Use
get_pubkey_byname to look up the keys (this also prunes invalid keys).
(pubkey_free): New function.
(pubkeys_free): New function.
* g10/gpg.c (main): Don't check for ambiguous key specifications.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Regression-due-to: e8c53fc
This change not only moves the checks for ambiguous key specifications
from gpg.c to getkey.c, it also disables the checks. The old code was
too divorced from the actual key lookups and, as such, it reproduced
the logic. Unfortunately, the reproduction was a poor one: despite
fixing some inconsistencies (e.g., 10cca02), it still didn't deal with
group expansion or the auto key lookup functionality. Given the
amount of instability introduced by this change, we (Neal & Werner)
decided it is better to defer introducing this functionality until
2.3.
* g10/pkclist.c (build_pk_list): Remove parameter use, which is always
called set to PUBKEY_USAGE_ENC. Update callers.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/keydb.c (keydb_update_keyblock): Don't replace the record at the
current offset. After taking the lock, extract the fingerprint from
the keyblock, find it and then replace it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2193
Between locating the record to update and actually updating the
keyblock, it is possible that another process modifies the keyring,
which causes the update to corrupt the keyring. This is due to a time
of check to time of use bug. The fix is straightforward: both
operations must be done while holding the lock. This changes the
semantics of the function slightly, but no callers need to be
modified. Further, it now becomes impossible to replace key A with B;
this function will only ever update B.
* g10/keydb.h (PK_LIST_ENCRYPT_TO): Change from a macro to an enum.
(PK_LIST_HIDDEN): Likewise.
(PK_LIST_CONFIG): Likewise.
(PK_LIST_SHIFT): Likewise.n
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Using an enum has the advantage that the symbol can be used in gdb.
* g10/keydb.h (PK_LIST_ENCRYPT_TO, PK_LIST_HIDDEN, PK_LIST_CONFIG)
(PK_LIST_SHIFT): New.
* g10/pkclist.c (build_pk_list): Use them here.
* g10/gpg.c (check_user_ids, main): Ditto.
* g10/gpg.c (main): Set PK_LIST_CONFIG for REMUSR and LOCUSR.
(check_user_ids): Skip check for command line specified options.
--
If a key has been given on the command line and it has not been
given by one of the encrypt-to options, we now skip the checks. The
reason is that the actual key selection code does its own checks and
provides proper status message to the caller to detect the wrong keys.
Without this we would break most frontends because they expect for
example STATUS_INV_RECP.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_new): Print an error message if needed. Also use
xtrycalloc because we return an error anyway.
* g10/delkey.c (do_delete_key): Handle error retruned by keydb_new.
* g10/export.c (do_export_stream): Ditto.
* g10/getkey.c (get_pubkey): Ditto.
(get_pubkey_fast): Ditto.
(get_pubkeyblock): Ditto.
(get_seckey): Ditto.
(key_byname): Ditto.
(get_pubkey_byfprint): Ditto.
(get_pubkey_byfprint_fast): Ditto.
(parse_def_secret_key): Ditto.
(have_secret_key_with_kid): Ditto.
* g10/import.c (import_one): Ditto.
(import_revoke_cert): Ditto.
* g10/keyedit.c (keyedit_quick_adduid): Ditto.
* g10/keygen.c (quick_generate_keypair): Ditto.
(do_generate_keypair): Ditto.
* g10/trustdb.c (validate_keys): Ditto.
* g10/keyserver.c (keyidlist): Ditto.
* g10/revoke.c (gen_desig_revoke): Ditto.
(gen_revoke): Ditto.
* g10/gpg.c (check_user_ids): Ditto.
(main): Do not print an error message for keydb_new error.
* g10/keylist.c (list_all): Use actual error code returned by
keydb_new.
* g10/t-keydb-get-keyblock.c (do_test): Abort on keydb_new error.
* g10/t-keydb.c (do_test): Ditto.
* g10/keyring.c (keyring_new): Actually return an error so that the
existing keydb_new error checking makes sense for a keyring resource.
(keyring_rebuild_cache): Take care of keyring_new returning an error.
--
Commit 04a6b903 changed keydb_new to return an error. However the
error was not checked at most places which we fix with this patch. To
make things easier keydb_new prints an error message itself.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (dump_search_desc): Rename from this...
(keydb_search_desc_dump): ... to this. Only process a single search
descriptor. Improve output. Don't mark as static. Update callers.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/options.h (opt.keyid_format): Add new value KF_DEFAULT.
* g10/keyid.c (format_keyid): New function.
(keystr): Use it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/getkey.c: Improve documentation and comments for most
functions. Move documentation for public functions from here...
* g10/keydb.h: ... to here.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.h (get_seckey_byname): Rename from this...
(get_seckey_default): ... to this. Drop the parameter name. Update
users.
* g10/getkey.c (get_seckey_byname): Rename from this...
(get_seckey_default): ... to this. Drop the parameter name. Drop the
code which assumed that NAME is not NULL.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.h (get_keyblock_byfprint): Remove prototype. Replace use
of this function with get_pubkey_byfprint.
* g10/getkey.c (get_pubkey_byname): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.h (get_pubkey_end): Remove declaration. Replace use of
function with getkey_end.
* g10/getkey.c (get_pubkey_byname): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c: Improve code comments and documentation of internal
interfaces. Improve documentation of public APIs and move that to...
* g10/keydb.h: ... this file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c (struct kid_list_s): Rename from this...
(struct kid_not_found_cache_bucket): ... to this. Update users.
Remove field state.
(kid_list_t): Remove type.
(KID_NOT_FOUND_CACHE_BUCKETS): Define. Use this instead of a literal.
(kid_found_table): Rename from this...
(kid_not_found_cache_bucket): ... to this. Update users.
(kid_found_table_count): Rename from this...
(kid_not_found_cache_count): ... to this. Update users.
(kid_not_found_p): Only return whether a key with the specified key id
is definitely not in the database.
(kid_not_found_insert): Remove parameter found. Update callers.
(keydb_search): Only insert a key id in the not found cache if it is
not found. Rename local variable once_found to already_in_cache.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Commit e0873a33 started tracking whether key ids where definitely in
the database. This information is, however, never used and thus just
unnecessarily inflates the cache. This patch effectively reverts that
change (however, e0873a33 contains two separate changes and this only
reverts that change).
* g10/keydb.h (KEYDB_RESOURCE_FLAG_GPGVDEF): New.
* g10/keydb.c (keydb_add_resource): Take care of new flag.
* g10/gpgv.c (main): Use new flag.
--
GnuPG-bug-id: 2025
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (kid_list_t): New.
(kid_not_found_table, n_kid_not_found_table): New.
(kid_not_found_p, kid_not_found_insert, kid_not_found_flush): New.
(keydb_insert_keyblock): Flush the new cache.
(keydb_delete_keyblock): Ditto.
(keydb_update_keyblock): Ditto.
(keydb_search): Use the new cache.
(keydb_dump_stats): New.
* g10/gpg.c (g10_exit): Dump keydb stats.
--
What we do here is to keep track of key searches by long keyids (as
stored in all signatures) so that we do not need to scan the keybox
again after we already found that this keyid will result in
not-found. As soon as we change gpg to run as a co-process we should
store this table per session because other instances of gpg may have
updated the keybox without us knowing.
On a test ring with
gpg: 94721 good signatures
gpg: 6831 bad signatures
gpg: 150703 signatures not checked due to missing keys
gpg: 5 signatures not checked due to errors
gpg: keydb: kid_not_found_table: total: 14132
this new cache speeds a --check-sigs listing up from 28 minutes to
less than 3 minutes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_handle): Add field saved_found.
(keydb_new): Init new field.
(keydb_push_found_state, keydb_pop_found_state): New.
* g10/keyring.c (kyring_handle): Add field saved_found.
(keyring_push_found_state, keyring_pop_found_state): New.
--
We have the same feature in gpgsm. It is very useful to check for an
unambiguous user id with a follow up update of the keyblock.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (print_pubkey_info): Print either "pub" or "sub".
* g10/getkey.c (get_pubkey_byfprint): Add optional arg R_KEYBLOCK.
* g10/keyid.c (keyid_from_fingerprint): Adjust for change.
* g10/revoke.c (gen_desig_revoke): Adjust for change.
* g10/card-util.c (card_status): Simplify by using new arg. Align
card-no string.
* g10/card-util.c (card_status): Remove not used GnuPG-1 code.
--
This now prints "sub" if the first used card key is actually a subkey.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (keyid_list): Add field "fpr".
(cache_user_id): Store fpr and check for dups only by fpr.
(get_pubkey_byfpr): New.
(get_user_id_string): Make static and use xasprintf.
(get_long_user_id_string): Use xasprintf.
(get_user_id_byfpr): New.
(get_user_id_byfpr_native): New.
* g10/keyid.c (fingerprint_from_pk): Make arg RET_LEN optional.
* g10/import.c (import_one): Use get_user_id_byfpr_native.
--
We now cache the userids using the fingerprint. This allows to print
the correct user id for keys with a duplicated key id. We should
eventually start to retire the use of all the old keyid based
functions. However, at some places we only have the keyid and thus
some of them will need to be kept (maybe changed with an indication to
show that more than several user ids are matching).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_handle): Add field no_caching.
(keyblock_cache): Repalce field kid by fpr.
(keydb_disable_caching): New.
(keydb_search): Use the fingerprint as cache index.
* g10/import.c (import_one): Use the fingerprint and not the kid to
lookup the key. Call keydb_disable_caching beofre re-searching for
update.
* tests/openpgp/import.test: Add a test case.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-search.c (keybox_search): Add arg r_skipped and skip too
long blobs.
* sm/keydb.c (keydb_search): Call keybox_search with a dummy param.
* g10/keydb.c (struct keydb_handle): Add field skipped_long_blobs.
(keydb_search_reset): Reset that field.
(keydb_search): Update that field.
(keydb_get_skipped_counter): New.
* g10/keylist.c (list_all): Print count of skipped keys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/passphrase.c (gpg_format_keydesc): Add mode 2. Change strings.
* g10/keydb.h (FORMAT_KEYDESC_NORMAL, FORMAT_KEYDESC_IMPORT)
(FORMAT_KEYDESC_EXPORT): New. Use them for clarity.
--
The use of the term "certificate" was more confusing than helpful.
* g10/gpg.c (oLegacyListMode, opts, main): Add --legacy-list-mode.
* g10/options.h (struct opt): Add field legacy_list_mode.
* g10/keydb.h (PUBKEY_STRING_SIZE): New.
* g10/keyid.c (pubkey_string): New.
* g10/import.c (import_one, import_secret_one): Use pubkey_string.
* g10/keylist.c (print_seckey_info): Ditto.
(print_pubkey_info, print_card_key_info): Ditto.
(list_keyblock_print): Ditto.
* g10/mainproc.c (list_node): Ditto.
* g10/pkclist.c (do_edit_ownertrust, build_pk_list): Ditto.
* g10/keyedit.c (show_key_with_all_names): Ditto. Also change the
format.
(show_basic_key_info): Ditto.
* common/openpgp-oid.c (openpgp_curve_to_oid): Also allow "ed25519".
(openpgp_oid_to_curve): Downcase "ed25519"
--
For ECC it seems to be better to show the name of the curve and not
just the size of the prime field. The curve name does not anymore fit
into the "<size><letter>" descriptor (e.g. "2048R") and a fixed length
format does not work either. Thus the new format uses
"rsa2048" - RSA with 2048 bit
"elg1024" - Elgamal with 1024 bit
"ed25519" - ECC using the curve Ed25519.
"E_1.2.3.4" - ECC using the unsupported curve with OID "1.2.3.4".
unless --legacy-list-mode is given. In does not anymore line up
nicely in columns thus I expect further changes to this new format.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Include shareddefs.h.
(main): Add option --pinentry-mode.
* g10/options.h (struct opt): Add field pinentry_mode.
* g10/passphrase.c: Include shareddefs.h.
(have_static_passphrase): Take care of loopback pinentry_mode.
(read_passphrase_from_fd): Ditto.
(get_static_passphrase): New.
(passphrase_to_dek_ext): Factor some code out to ...
(emit_status_need_passphrase): new.
* g10/call-agent.c (start_agent): Send the pinentry mode.
(default_inq_cb): Take care of the PASSPHRASE inquiry. Return a
proper error code.
(agent_pksign): Add args keyid, mainkeyid and pubkey_algo.
(agent_pkdecrypt): Ditto.
* g10/pubkey-enc.c (get_it): Pass new args.
* g10/sign.c (do_sign): Pass new args.
* g10/call-agent.c (struct default_inq_parm_s): New. Change all
similar structs to reference this one. Change all users and inquire
callback to use this struct, instead of NULL or some undefined but not
used structs. This change will help to eventually get rid of global
variables.
--
This new features allows to use gpg without a Pinentry. As a
prerequisite the agent must be configured to allow the loopback
pinentry mode (option --allow-loopback-pinentry). For example
gpg2 --pinentry-mode=loopback FILE.gpg
may be used to decrypt FILE.gpg while entering the passphrase on the
tty. If batch is used, --passphrase et al. may be used, if
--command-fd is used, the passphrase may be provided by another
process. Note that there are no try-again prompts in case of a bad
passphrase.
* kbx/keybox-defs.h (_keybox_write_header_blob): Move prototype to ..
* kbx/keybox.h: here.
* kbx/keybox-init.c (keybox_lock): Add dummy function
* g10/keydb.c: Include keybox.h.
(KeydbResourceType): Add KEYDB_RESOURCE_TYPE_KEYBOX.
(struct resource_item): Add field kb.
(maybe_create_keyring_or_box): Add error descriptions to diagnostics.
Add arg IS_BOX. Write a header for a new keybox file.
(keydb_add_resource): No more need for the force flag. Rename the
local variable "force" to "create". Add URL scheme "gnupg-kbx". Add
magic test to detect a keybox file. Add basic support for keybox.
(keydb_new, keydb_get_resource_name, keydb_delete_keyblock)
(keydb_locate_writable, keydb_search_reset, keydb_search2): Add
support for keybox.
(lock_all, unlock_all): Ditto.
* g10/Makefile.am (needed_libs): Add libkeybox.a.
(gpg2_LDADD, gpgv2_LDADD): Add KSBA_LIBS as a workaround.
* g10/keydb.h (KEYDB_RESOURCE_FLAG_PRIMARY)
KEYDB_RESOURCE_FLAG_DEFAULT, KEYDB_RESOURCE_FLAG_READONLY): New.
* g10/gpg.c, g10/gpgv.c (main): Use new constants.
--
I did most of these changes back in 2011 and only cleaned them up
now. More to follow soon.
Returning -1 as an error code is not very clean given that gpg error
has more descriptive error codes. Thus we now return
GPG_ERR_NOT_FOUND for all search operations and adjusted all callers.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
