* g10/mainproc.c (proc_encrypted): Check ->result against -1.
When c->dek == NULL, put GPG_ERR_NO_SECKEY only when not set.
* g10/pubkey-enc.c (get_session_key): Set k->result by the result of
get_it.
When no secret key is available for some reasons, return the last
specific error, if any.
GnuPG-bug-id: 4561
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c (main): Change default.
--
Due to the DoS attack on the keyeservers we do not anymore default to
import key signatures. That makes the keyserver unsuable for getting
keys for the WoT but it still allows to retriev keys - even if that
takes long to download the large keyblocks.
To revert to the old behavior add
keyserver-optiions no-self-sigs-only,no-import-clean
to gpg.conf.
GnuPG-bug-id: 4607
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkey_byname): Add special traeatment for default
and skipped-local.
--
This change avoids error message like
gpg: error retrieving 'foo@example.org' via None: No public key
A 'None' mechanism is something internal.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aLocateExtKeys): New.
(opts): Add --locate-external-keys.
(main): Implement that.
* g10/getkey.c (get_pubkey_byname): Implement GET_PUBKEY_NO_LOCAL.
(get_best_pubkey_byname): Add arg 'mode' and pass on to
get_pubkey_byname. Change callers.
* g10/keylist.c (public_key_list): Add arg 'no_local'.
(locate_one): Ditto. Pass on to get_best_pubkey_byname.
--
This new command is a shortcut for
--auto-key-locate nodefault,clear,wkd,... --locate-key
and uses the default or configured AKL list but does so without local.
See also
GnuPG-bug-id: 4599
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (enum get_pubkey_modes): New.
* g10/getkey.c (get_pubkey_byname): Repalce no_akl by a mode arg and
change all callers.
--
This change prepares the implementation of GET_PUBKEY_NO_LOCAL.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_one): Rename to ...
(import_one_real): this. Do not print and update stats on keyring
write errors.
(import_one): New. Add fallback code.
--
GnuPG-bug-id: 4591
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_SELF_SIGS_ONLY): New.
* g10/import.c (parse_import_options): Add option "self-sigs-only".
(read_block): Handle that option.
--
This option is intended to help against importing keys with many bogus
key-signatures. It has obvious drawbacks and is not a bullet-proof
solution because a self-signature can also be faked and would be
detected only later.
GnuPG-bug-id: 4591
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c: Change arg 'with_meta' to 'options'. Change callers.
--
This chnage allows to pass more options to read_block.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (g10_exit): Block all signals before calling
emergency_cleanup.
--
There is a race condition here which results crash of the process.
When a signal is delivered in emergency_cleanup, it is called again.
This change fixes the problem.
GnuPG-bug-id: 2747
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/tofu.c: Removed some translation markups which either make no
sense or are not possble.
--
Error message which are not helpful for the user but indicate a
problem of the installation or the code do not need a translation.
The translator may not understand them correctly and the use support
can't immediately locate the problem because it needs to be reverse
translated.
There is also one case where certain grammar constructs are
assumed (concatenating parts of a sentence at runtime). Better do not
translate that than getting weird sentences.
* common/userids.c (classify_user_id): Do not set the EXACT flag in
the default case.
* g10/export.c (exact_subkey_match_p): Make static,
* g10/delkey.c (do_delete_key): Implement subkey only deleting.
--
GnuPG-bug-id: 4457
* g10/keydb.c (parse_keyblock_image): Treat invalid packet special.
--
This is in particular useful to run --list-keys on a keyring with
corrupted packets. The extra flush is to keep the diagnostic close to
the regular --list-key output.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c: Move max packet lengths constants to ...
* g10/packet.h: ... here.
* g10/build-packet.c (do_user_id): Return an error if too data is too
large.
* g10/keygen.c (write_uid): Return an error for too large data.
--
This can lead to keyring corruption becuase we expect that our parser
is abale to parse packts created by us. Test case is
gpg --batch --passphrase 'abc' -v \
--quick-gen-key $(yes 'a'| head -4000|tr -d '\n')
GnuPG-bug-id: 4532
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/delkey.c (do_delete_key): Don't delete the keyblock on dry runs.
Do not clear the ownertrust. Do not let the agent delete the key.
--
Co-authored-by: Matheus Afonso Martins Moreira
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Add flags.dummy_outfile.
* g10/decrypt.c (decrypt_message): Set this global flag instead of the
fucntion local flag.
* g10/plaintext.c (get_output_file): Ignore opt.output if that was
used as a dummy option aslong with --use-embedded-filename.
--
The problem here was that an explicit specified --decrypt, as
meanwhile suggested, did not work with that dangerous
--use-embedded-filename. In contrast it worked when gpg decrypted as
a side-effect of parsing the data.
GnuPG-bug-id: 4500
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/exec.c (w32_system): Add "!ShellExecute" special.
* g10/photoid.c (get_default_photo_command): Use the new ShellExecute
under Windows and fallbac to 'display' and 'xdg-open' in the Unix
case.
(show_photos): Flush stdout so that the output is shown before the
image pops up.
--
For Unix this basically syncs the code with what we have in gpg 1.4.
Note that xdg-open may not be used when running as root which we
support here.
For Windows we now use ShellExecute as this seems to be preferred over
"cmd /c start"; however this does not solve the actual problem we had
in the bug report. To solve that problem we resort to a wait
parameter which defaults to 400ms. This works on my Windows-10
virtualized test box. If we can figure out which simple viewers are
commonly installed on Windows we should enhance this patch to test for
them.
GnuPG-bug-id: 4334
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/export.c (cleartext_secret_key_to_openpgp): ignore trailing
sublists in private-key S-expression.
--
When gpg-agent learns about a private key from its ssh-agent
interface, it stores its S-expression with the comment attached. The
export mechanism for OpenPGP keys already in cleartext was too brittle
because it would choke on these comments. This change lets it ignore
any additional trailing sublists.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gnupg-Bug-Id: 4490
* kbx/keybox-init.c (keybox_lock): New arg TIMEOUT. Change all
callers to pass -1 when locking.
* sm/keydb.c (struct resource_item): Remove LOCKANDLE.
(struct keydb_handle): Add KEEP_LOCK.
(keydb_add_resource): Use keybox locking instead of a separate dotlock
for testing whether we can run a compress.
(keydb_release): Reset KEEP_LOCK.
(keydb_lock): Set KEEP_LOCK.
(unlock_all): Take care of KEEP_LOCK.
(lock_all): Use keybox_lock instead of dotlock fucntions.
(keydb_delete): Remove arg UNLOCK.
* sm/delete.c (delete_one): Adjust keydb_delete. Due to the KEEP_LOCK
the keydb_release takes care of unlocking.
--
This aligns the code more with g10/keydb.c and avoids the separate
calls to dotlock_take.
GnuPG-bug-id: 4505
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_search): Remove a specialized error
message.
--
Dirmngr comes with a default keyserver and the suggestion to use
gpg --keyserver
is not good because that option is deprecated. An error message
"No keyserver available" is sufficient.
GnuPG-bug-id: 4512
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (update_keysig_packet): Convert digest algo when needed.
--
Several gpg commands try to keep most properties of a key signature
when updating (i.e. creating a new version of a key signature). This
included the use of the current hash-algorithm. This patch changes
this so that SHA-1 or RMD160 are replaced by SHA-256 if
possible (i.e. for RSA signatures). Affected commands are for example
--quick-set-expire and --quick-set-primary-uid.
GnuPG-bug-id: 4508
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (make_keysig_packet): Remove obsolete arg diegst_algo
which was always passed as 0. Change all callers.
* g10/gpgcompose.c (signature): Warn when trying to set a digest algo.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_signature): Take only rthe addrspec from a
Signer's UID subpacket.
--
This is to address a problem in the currentr OpenKeychain which put
the entire UID into the subpacket. For example our Tofu code can only
use the addrspec and not the entire UID.
Reported-by: Wiktor Kwapisiewicz <wiktor@metacode.biz>
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (opts): New options --authenticode and --attribute.
* sm/gpgsm.h (opt): Add vars authenticode and attribute_list.
* sm/sign.c (add_signed_attribute): New but inactive.
(gpgsm_sign): Use new options.
--
Because libksba 1.4 is not yet ready the new code is not yet active.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_best_pubkey_byname): Set new.uid always
to NULL after use.
--
pubkey_cmp is not guranteed to set new.uid.
So if the diff < 0 case is reached best is set to new.
If then diff > 0 is reached without modifying new.uid
e.g. if the key has no matching mboxes. new.uid is
free'd even though the uid is still referenced in
best.
GnuPG-Bug-Id: T4462
* g10/objcache.c: New.
* g10/objcache.h: New.
* g10/Makefile.am (common_source): Add them.
* g10/gpg.c: Include objcache.h.
(g10_exit): Call objcache_dump_stats.
* g10/getkey.c: Include objcache.h.
(get_primary_uid, release_keyid_list): Remove.
(cache_user_id): Remove.
(finish_lookup): Call the new cache_put_keyblock instead of
cache_user_id.
(get_user_id_string): Remove code for mode 2.
(get_user_id): Implement using cache_get_uid_bykid.
--
This generic caching module is better than the ad-hoc code we used in
getkey.c. More cleanup in getkey is still required but it is a
start. There is also a small performance increase with the new cache:
With a large keyring and --list-sigs I get these numbers:
| | before | after |
|------+------------+------------|
| real | 14m1.028s | 12m16.186s |
| user | 2m18.484s | 1m36.040s |
| sys | 11m42.420s | 10m40.044s |
Note the speedup in the user time which is due to the improved cache
algorithm. This is obvious, because the old cache was just a long
linked list; the new cache are two hash tables.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_public_key): Add fields fpr and fprlen.
* g10/keyid.c (do_fingerprint_md): Remove.
(compute_fingerprint): New.
(keyid_from_pk): Simplify.
(fingerprint_from_pk): Simplify.
(hexfingerprint): Avoid using extra array.
--
This is similar to what we are doing with the keyid for a long time.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_import_wkd): Clear NO_ARMOR.
--
We may even adjust the specs to allow that. It should not be a
problem for any OpenPGP implementation because armored keys are very
common and de-armoring code is de-facto a mandatory feature.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import): Limit the number of considered keys to 5.
(import_one): Return the first fingerprint in case of WKD.
--
The Web Key Directory should carry only one key. However, some
providers like to put old or expired keys also into the WKD. I don't
thunk that this is a good idea but I heard claims that this is needed
for them to migrate existing key data bases.
This patch puts a limit on 5 on it (we had none right now) and also
fixes the issue that gpg could not work immediately with the requested
key because the code uses the fingerprint of the key to use the
imported key. Now the first key is used. On a second try (w/o
accessing the WKD) the regular key selection mechanism would be in
effect. I think this is the most conservative approach. Let's see
whether it helps.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (struct keyid_list): Add field fprlen.
(cache_user_id): Set and test it.
(get_user_id_byfpr): Make static, add arg fprlen and use it.
(get_user_id_byfpr_native): Add arg fprlen and change all callers.
--
This was a regression in the 2.3 base.
GnuPG-bug-id: 3801
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (agent_scd_keypairinfo): Add arg 'keyref'.
* g10/keygen.c (ask_algo): Adjust.
* g10/skclist.c (enum_secret_keys): Request the keyref directly.
--
This improves commit ec6a677923 to avoid
looping over all keypairinfos. This way scdaemon does not need to
compute all the keypairinfos for all keys of a card. This patch is
possible due the enhanced READKEY command in scdaemon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (struct getattr_one_parm_s): New.
(getattr_one_status_cb): New.
(agent_scd_getattr_one): New.
* g10/pubkey-enc.c (get_it): Allow the standard leading zero byte from
pkcs#1.
* g10/skclist.c (enum_secret_keys): Handle non-OpenPGP cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (agent_scd_keypairinfo): Use --keypairinfo.
* sm/call-agent.c (gpgsm_agent_scd_keypairinfo): Ditto.
* scd/app-openpgp.c (do_getattr): Add attributes "$ENCRKEYID" and
"$SIGNKEYID".
* scd/app-piv.c (do_getattr): Ditto.
--
We already have $AUTHKEYID to locate the keyref of the key to be used
with ssh. It will also be useful to have default keyref for
encryption and signing. For example, this will allow us to repalce
the use of "OPENPGP.2" by a app type specific keyref.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/skclist.c (enum_secret_keys): Move list forward on error.
--
The error is not easy to reproduce but may occur if a card is removed
at the wrong time. Tested by changing the code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (print_pkenc_list): Simplify.
--
This changes the output from
# ------------------------ >8 ------------------------
gpg: encrypted with 2048-bit RSA key, ID D20073D46DF6C97D, created 2019-04-02
"Test with PIV card"
to
gpg: encrypted with rsa2048 key, ID D20073D46DF6C97D, created 2019-04-02
"Test with PIV card"
Signed-off-by: Werner Koch <wk@gnupg.org>
# ------------------------ 8< ------------------------
* g10/call-agent.c (agent_scd_readkey): New.
* g10/keygen.c (ask_key_flags): Factor code out to ..
(ask_key_flags_with_mask): new.
(ask_algo): New mode 14.
--
Note that this new menu 14 is always displayed. The usage flags can
be changed only in --expert mode, though. Creating and using signing
keys works but decryption does not yet work; we will need to tweak a
couple of other places for that. Tested with a Yubikey's PIV app.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (scd_keypairinfo_status_cb): Also store the usage
flags.
* sm/call-agent.c (scd_keypairinfo_status_cb): Ditto.
* sm/certreqgen-ui.c (gpgsm_gencertreq_tty): Print the usage flags.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (start_agent): Use card app auto selection.
* g10/card-util.c (current_card_status): Print the Application type.
(card_status): Put empty line between card listings.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (ask_curve): Change algo ID to ECDSA if it changed from
an EdDSA curve.
--
This change matters when it is called from ask_card_keyattr.
Some-comments-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/import.c (NODE_TRANSFER_SECKEY): New.
(import): Add attic kludge.
(transfer_secret_keys): Add arg only_marked.
(resync_sec_with_pub_keyblock): Return removed seckeys via new arg
r_removedsecs.
(import_secret_one): New arg r_secattic. Change to take ownership of
arg keyblock. Implement extra secret key import logic. Factor some
code out to ...
(do_transfer): New.
(import_matching_seckeys): New.
--
The PGP desktops exported secret keys are really stupid. And they
even a have kind of exception in rfc4880 which does not rule that
out (section 11.2):
[...] Implementations SHOULD include self-signatures on any user
IDs and subkeys, as this allows for a complete public key to be
automatically extracted from the transferable secret key.
Implementations MAY choose to omit the self-signatures, especially
if a transferable public key accompanies the transferable secret
key.
Now if they would only put the public key before the secret
key. Anyway we now have a workaround for that ugliness.
GnuPG-bug-id: 4392
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (struct kbnode_struct): Replace unused field RECNO by
new field TAG.
* g10/kbnode.c (alloc_node): Change accordingly.
* g10/import.c (import_one): Add arg r_valid.
(sec_to_pub_keyblock): Set tags.
(resync_sec_with_pub_keyblock): New.
(import_secret_one): Change return code to gpg_error_t. Return an
error code if sec_to_pub_keyblock failed. Resync secret keyblock.
--
When importing an invalid secret key ring for example without key
binding signatures or no UIDs, gpg used to let gpg-agent store the
secret keys anyway. This is clearly a bug because the diagnostics
before claimed that for example the subkeys have been skipped.
Importing the secret key parameters then anyway is surprising in
particular because a gpg -k does not show the key. After importing
the public key the secret keys suddenly showed up.
This changes the behaviour of
GnuPG-bug-id: 4392
to me more consistent but is not a solution to the actual bug.
Caution: The ecc.scm test now fails because two of the sample keys
don't have binding signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (show_basic_key_info): New arg 'print_sec'. Remove
useless code for "sub" and "ssb".
* g10/import.c (import_one): Pass FROM_SK to show_basic_key_info. Do
not print the first keyinfo in FROM_SK mode.
printing.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (write_status_printf): Escape CR and LF.
* g10/import.c (print_import_check): Simplify by using
write_status_printf and hexfingerprint.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR16)
(KEYDB_SEARCH_MODE_FPR20, KEYDB_SEARCH_MODE_FPR32): Remove. Switch
all users to KEYDB_SEARCH_MODE_FPR along with the fprlen value.
--
These search modes were added over time and there has until recently
be no incentive to remove the cruft. With the change for v5 keys I
finally went over all places and allowed the generic fingerprint mode
along with a given length of the fingerprint at all places.
Consequently the other modes can now be removed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (set_compliance_option, main): Change CO_GNUPG to include
rfc4880bis features.
(main): Change rfc4880bis warning to a note.
--
Note that the default is CO_GNUPG and not CO_OPENPGP. CO_OPENPGP does
not include rfc4880bis yet and has a couple of things we don't like,
like --allow-non-selfsigned-uids.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/build-packet.c (gpg_mpi_write): New optional arg
R_NWRITTEN. Allow NULL for OUT. Change all callers.
(do_key): Support v5 keys.
(build_sig_subpkt_from_sig): Support 32 byte fingerprints.
* g10/parse-packet.c (parse_signature): First try to set the keyid
from the issuer fingerprint.
(parse_key): Support v5 keys.
(create_gpg_control): Better make sure to always allocate the static
size of the struct in case future compilers print warnings.
* g10/keyid.c (hash_public_key): Add v5 support.
(keyid_from_pk): Ditto.
(keyid_from_fingerprint): Ditto.
(fingerprint_from_pk): Ditto.
* g10/keygen.c (KEYGEN_FLAG_CREATE_V5_KEY): New.
(pVERSION, pSUBVERSION): New.
(add_feature_v5): New.
(keygen_upd_std_prefs): Call it.
(do_create_from_keygrip): Add arg keygen_flags and support the v5
flag.
(common_gen): Support the v5 flag.
(parse_key_parameter_part): New flags v4 and v5.
(parse_key_parameter_string): Add args for version and subversion.
(read_parameter_file): New keywords "Key-Version" and
"Subkey-Version".
(quickgen_set_para): Add arg 'version'.
(quick_generate_keypair, generate_keypair): Support version parms.
(do_generate_keypair): Support v5 key flag.
(generate_subkeypair): Ditto.
(generate_card_subkeypair): Preparse for keyflags.
(gen_card_key): Ditto.
* g10/sig-check.c (check_signature2): Add args extrahash and
extrahashlen.
(check_signature_end): Ditto.
(check_signature_end_simple): Ditto. Use them.
* g10/mainproc.c (proc_plaintext): Put extra hash infor into the
control packet.
(do_check_sig): Add args extrahas and extrahashlen and pass them on.
(issuer_fpr_raw): Support 32 byte fingerprint.
(check_sig_and_print): get extra hash data and pass it on.
--
Note that this is only basic support and requires more fine
tuning/fixing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/userids.c (classify_user_id): Support 32 byte fingerprints.
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR32): New.
(struct keydb_search_desc): Add field fprlen.
* kbx/keybox-defs.h (struct _keybox_openpgp_key_info): Add field
version and increase size of fpr to 32.
* kbx/keybox-blob.c: Define new version 2 for PGP and X509 blobs.
(struct keyboxblob_key): Add field fprlen and increase size of fpr.
(pgp_create_key_part_single): Allow larger fingerprints.
(create_blob_header): Implement blob version 2 and add arg want_fpr32.
(_keybox_create_openpgp_blob): Detect the need for blob version 2.
* kbx/keybox-search.c (blob_get_first_keyid): Support 32 byte
fingerprints.
(blob_cmp_fpr): Ditto.
(blob_cmp_fpr_part): Ditto.
(has_fingerprint): Add arg fprlen and pass on.
(keybox_search): Support KEYDB_SEARCH_MODE_FPR32 and adjust for
changed has_fingerprint.
* kbx/keybox-openpgp.c (parse_key): Support version 5 keys.
* kbx/keybox-dump.c (_keybox_dump_blob): Support blob version 2.
* g10/delkey.c (do_delete_key): Support KEYDB_SEARCH_MODE_FPR32.
* g10/export.c (exact_subkey_match_p): Ditto.
* g10/gpg.c (main): Ditto.
* g10/getkey.c (get_pubkey_byfprint): Adjust for changed
KEYDB_SEARCH_MODE_FPR.
* g10/keydb.c (keydb_search_desc_dump): Support
KEYDB_SEARCH_MODE_FPR32 and adjust for changed KEYDB_SEARCH_MODE_FPR.
(keydb_search): Add new arg fprlen and change all callers.
* g10/keyedit.c (find_by_primary_fpr): Ditto.
* g10/keyid.c (keystr_from_desc): Ditto.
* g10/keyring.c (keyring_search): Ditto.
* g10/keyserver.c (print_keyrec): Ditto.
(parse_keyrec): Ditto.
(keyserver_export): Ditto.
(keyserver_retrieval_screener): Ditto.
(keyserver_import): Ditto.
(keyserver_import_fprint): Ditto.
(keyidlist): Ditto.
(keyserver_get_chunk): Ditto.
* g10/keydb.c (keydb_search): Add new arg fprlen and change all
callers.
* sm/keydb.c (keydb_search_fpr): Adjust for changed
KEYDB_SEARCH_MODE_FPR.
--
This prepares the support for OpenPGP v5 keys. The new version 2 blob
format is needed for the longer fingerprints and we also use this
opportunity to prepare for storing the keygrip in the blob for faster
lookup by keygrip. Right now this is not yet functional.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (AC_CHECK_SIZEOF): Test size_t.
* g10/sig-check.c (check_signature_end_simple): Support v5 signatures
as per current rfc4880bis. For correctness also allow for N > 2^32.
* g10/sign.c (pt_extra_hash_data_t): New.
(hash_sigversion_to_magic): New arg EXTRAHASH.
(write_plaintext_packet): New arg R_EXTRAHASH.
(write_signature_packets): Pass EXTRAHASH.
(sign_file): Ditto.
(sign_symencrypt_file): Ditto.
--
Take care: The code path for v5 sigs has not yet been tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/ecdh.c (kek_params_table): Use CIPHER_ALGO_AES192 for
ECC strength 384, according to RFC-6637.
--
Reported-by: Trevor Bentley
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keylist.c (print_key_line): Print a warning for invalid algos.
--
Non-OpenPGP compliant keys now show a warning flag on the sec or pub
line like in:
gpg: can't encode a 256 bit MD into a 88 bits frame, algo=8
sec cv25519 2019-01-30 [INVALID_ALGO]
4239F3D606A19258E7A88C3F9A3F4F909C5034C5
uid [ultimate] ffffff
Instead of showing the usage flags "[CE]". Without this patch only
the error message is printed and the reason for it was not immediately
obvious (cv25519 is encryption only but we always consider the primary
key as having the "C" flag).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (map_pk_gcry_to_openpgp): Add EdDSA mapping.
--
Due to this missing mapping a "gpg --export --full-gen-key" with
selection "13 - Existing key" did not worked for an ed25519 key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (agent_get_s2k_count): Actually return the count.
--
The previous push was definitely a bit to hasty.
Fixes-Commit: ec13b1c562
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/passphrase.c (encode_s2k_iterations): Move function to ...
* common/openpgp-s2k.c: new file. Remove default intialization code.
* common/openpgpdefs.h (S2K_DECODE_COUNT): New to keep only one copy.
* g10/call-agent.c (agent_get_s2k_count): Change to return the count
and print an error.
* agent/protect.c: Include openpgpdefs.h
* g10/card-util.c (gen_kdf_data): Adjust for changes
* g10/gpgcompose.c: Include call-agent.h.
(sk_esk): Adjust for changes.
* g10/passphrase (passphrase_to_dek): Adjust for changes.
* g10/main.h (S2K_DECODE_COUNT): Remove macro.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (openpgp_pk_test_algo2): Add extra check.
--
The problem is that --key-gen --batch with a parameter file didn't
detect that Elgamal is not capable of signing and so an error was only
triggered at the time the self-signature was created. See the code
comment for details.
GnuPG-bug-id: 4329
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (print_pubkey_info): Reverse the condition.
--
This mistakes were introduced when replacing by estream.
It resulted 'gpg --card-status' from a process with no controlling
terminal fails.
Fixes-commit: fb2ba98963
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/packet.h (struct revocation_key): Add field 'fprlen'.
* g10/parse-packet.c (parse_revkeys): Set fprlen and allow for v5
keys. Also fix reading of unitialized data at place where
MAX_FINGERPRINT_LEN is used.
* g10/revoke.c (gen_desig_revoke): Allow for v5 keys and use fprlen.
Do an explicit compare to avoid reading unitialized data.
* g10/sig-check.c (check_revocation_keys): Use the fprlen.
* g10/getkey.c (merge_selfsigs_main): Do an explicit copy to avoid
reading unitialized data.
* g10/import.c (revocation_present): Use fprlen.
* g10/keyedit.c (show_key_with_all_names): Use fprlen.
(menu_addrevoker): Use fprlen. Allow for v5 keys.
* g10/keygen.c (keygen_add_revkey): Use fprlen.
(parse_revocation_key): Allow for v5 keys.
* g10/keyid.c (keyid_from_fingerprint): Allow for v5 keys. Print a
better error message in case of bogus fingerprints.
* g10/keylist.c (print_revokers): Use fprlen.
--
The reading of uninitialized data is harmless but we better fix it to
make valgrind happy. More serious was that we always passed
MAX_FINGERPRINT_LEN but we will need to support 20 and 32 octet
fingerprints and MAX_FINGERPRINT_LEN would be too large for a v4.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (parse_list_options): Add option "show-only-fpr-mbox".
* g10/options.h (LIST_SHOW_ONLY_FPR_MBOX): New.
* g10/keylist.c (list_keyblock_simple): New.
(list_keyblock): Call it.
(list_all): Do not print the keyring name in LIST_SHOW_ONLY_FPR_MBOX
mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/mbox-util.c (mailbox_from_userid): Add arg subaddress and
implement. Change all callers to pass false for it.
* common/t-mbox-util.c (run_mbox_no_sub_test): New.
(run_filter): Add arg no_sub.
(main): Call new test and add option --no-sub.
--
Some stats: In the about 5300000 keys on the SKS servers we found 3055
unique mailboxes with a '+' in it. After removing leading and
trailing '+' as well as multiple '+' (e.g. "c++" or "foo+bar+baz")
2697 were left which seem to be valid sub-addresses.
To filter mailboxes out from a line delimited list with
user-ids (e.g. an SQL output), the command
t-mbox-util --verbose --filter
can be used; to output w/o sub-addresses add --no-sub.
GnuPG-bug-id: 4200
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (mainproc_context): New member
'seen_pkt_encrypted_aead'.
(release_list): Clear 'seen_pkt_encrypted_aead'.
(proc_encrypted): Set 'seen_pkt_encrypted_aead'.
(have_seen_pkt_encrypted_aead): New.
(proc_plaintext): Do not enable extra hash contexts when decryption
AEAD input.
--
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/armor.c (asctobin): Larger look-up table for fast path.
(initialize): Update 'asctobin' initialization.
(radix64_read): Add fast path for radix64 to binary conversion.
--
This patch adds fast path for radix64 to binary conversion in
armored decryption.
Benchmark results below, tested on Intel Core i7-4790K (turbo off).
Encrypted 2 GiB through pipe to ramfs file using AES128. Decrypt
ramfs file out through pipe to /dev/null.
before patch-set
----------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 13.8 140 MB/s
decrypt-aead: 30.6 68 MB/s
encrypt-cfb: 17.4 114 MB/s
decrypt-cfb: 32.6 64 MB/s
after (decrypt+iobuf+crc+radix64 opt)
-------------------------------------
gpg process
armor: user time pipe transfer rate
decrypt-aead: 9.8 200 MB/s
decrypt-cfb: 11.9 168 MB/s
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/armor.c (bintoasc): Change to read-only.
(initialize): Use const pointer for 'bintoasc'.
(armor_output_buf_as_radix64): New function for faster binary to
radix64 conversion.
(armor_filter): Use new conversion function.
--
This patch adds faster binary to radix64 conversion to speed up
armored encryption.
Benchmark results below, tested on Intel Core i7-4790K (turbo off).
Encrypted 2 GiB through pipe to ramfs file using AES128. Decrypt
ramfs file out through pipe to /dev/null.
before patch-set
----------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 13.8 140 MB/s
decrypt-aead: 30.6 68 MB/s
encrypt-cfb: 17.4 114 MB/s
decrypt-cfb: 32.6 64 MB/s
after (decrypt+iobuf+crc+radix64 opt)
-------------------------------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 2.7 523 MB/s
encrypt-cfb: 6.7 264 MB/s
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/armor.c (CRCINIT, CRCPOLY, CRCUPDATE, crc_table): Remove.
(new_armor_context): Open libgcrypt CRC24 context.
(release_armor_context): Close CRC24 context.
(initialize): Remove CRC table generation.
(get_afx_crc): New.
(check_input, fake_packet, radix64_read, armor_filter): Update to use
CRC24 context.
* g10/filter.h (armor_filter_context_t): Replace crc intermediate value
with libgcrypt md context pointer.
--
This patch changes armor filter to use optimized CRC24 implementation
from libgcrypt to speed up encryption and decryption.
Benchmark results below, tested on Intel Core i7-4790K (turbo off).
Encrypted 2 GiB through pipe to ramfs file using AES128. Decrypt
ramfs file out through pipe to /dev/null.
before patch-set
----------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 13.8 140 MB/s
decrypt-aead: 30.6 68 MB/s
encrypt-cfb: 17.4 114 MB/s
decrypt-cfb: 32.6 64 MB/s
after (decrypt+iobuf+crc opt)
-----------------------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 8.7 211 MB/s
decrypt-aead: 17.6 116 MB/s
encrypt-cfb: 12.6 153 MB/s
decrypt-cfb: 19.6 105 MB/s
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/armor.c (radix64_read): Check EOF with '!afx->buffer_len' instead
of 'c == -1', as 'c' is never set to this value.
--
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/decrypt-data.c (fill_buffer): Use iobuf_read instead of iobuf_get
for reading data.
--
This patch reduces iobuf_read per byte processing overhead and speeds
up decryption.
Benchmark results below, tested on Intel Core i7-4790K (turbo off).
Encrypted 2 GiB through pipe to ramfs file using AES128. Decrypt
ramfs file out through pipe to /dev/null.
before patch-set
----------------
gpg process
no-armor: user time pipe transfer rate
encrypt-aead: 1.02 1.0 GB/s
decrypt-aead: 10.8 185 MB/s
encrypt-cfb: 4.8 342 MB/s
decrypt-cfb: 12.7 157 MB/s
gpg process
armor: user time pipe transfer rate
encrypt-aead: 13.8 140 MB/s
decrypt-aead: 30.6 68 MB/s
encrypt-cfb: 17.4 114 MB/s
decrypt-cfb: 32.6 64 MB/s
after (decrypt opt)
-------------------
gpg process
no-armor: user time pipe transfer rate
decrypt-aead: 7.3 263 MB/s
decrypt-cfb: 9.3 211 MB/s
gpg process
armor: user time pipe transfer rate
decrypt-aead: 27.0 77 MB/s
decrypt-cfb: 29.0 72 MB/s
Note: decryption results are much slower than encryption because of
extra SHA1 & RIPEMD160 hashing.
GnuPG-bug-id: 3786
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/cipher-aead.c (do_flush): No cast is correct.
* g10/decrypt-data.c (aead_underflow): No cast needed.
Use "%j" for uint64_t for chunklen.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/call-agent.c (learn_status_cb): Parse "bt" flag.
* g10/call-agent.h: New member field "bt".
* g10/card-util.c (uif): Limit its access only when it is supported.
* scd/app-openpgp.c (do_setattr): Allow access to UIF objects only
when there is a button.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/tdbio.c (tdbio_update_version_record): Never store a TOFU model.
(create_version_record): Don't init as TOFU.
(tdbio_db_matches_options): Don't indicate a change in case TOFU is
stored in an old trustdb file.
--
This change allows to switch between a tofu and pgp or tofu+pgp trust
model without an auto rebuild of the trustdb. This also requires that
the tofu trust model is requested on the command line. If TOFU will
ever be the default we need to tweak the model detection via TM_AUTO
by also looking into the TOFU data base,
GnuPG-bug-id: 4134
* g10/sig-check.c (check_signature_end_simple):
--
Obviously we should not ignore a back signature here.
Fixes-commit: 214b007726
GnuPG-bug-id: 4014
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pubkey-enc.c (get_session_key): Take care of
opt.skip_hidden_recipients.
--
This was lost due to
Fixes-commit: ce2f717601
GnuPG-bug-id: 4169
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_DROP_UIDS): New.
(EXPORT_DROP_UIDS): New.
* g10/import.c (parse_import_options): Add option "import-drop-uids".
(import_one): Don't bail out with that options and no uids found.
Also remove all uids.
(remove_all_uids): New.
* g10/export.c (parse_export_options): Add option "export-drop-uids".
(do_export_one_keyblock): Implement option.
--
These options are required for experiments with changes to the
keyserver infrastructure.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/skclist.c (enum_secret_keys): Use SK_LIST instead of pubkey_t.
--
The use of pubkey_t was wrong. The use is just a list of keys, not
with keyblock. With SK_LIST, release_sk_list releases memory by
free_public_key.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/skclist.c (enum_secret_keys): Don't forget to call
free_public_key in the error return paths.
--
Reported-by: Philippe Antoine
GnuPG-bug-id: 4140
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* dirmngr/ks-engine-hkp.c (ks_hkp_search): Send SOURCE status also on
NO DATA error.
(ks_hkp_get): Ditto.
* g10/call-dirmngr.c (gpg_dirmngr_ks_search): Print "data source" info
also on error.
(gpg_dirmngr_ks_get): Ditto.
--
If a keyserver does not return any data it can be useful to know which
keyserver out of the pool answered.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (read_block): Call free_packet to skip the packet.
--
Reported-by: Philippe Antoine
GnuPG-bug-id: 3916
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c (oKnownNotation): New const.
(opts): Add option --known-notation.
(main): Set option.
* g10/parse-packet.c (known_notations_list): New local var.
(register_known_notation): New.
(can_handle_critical_notation): Rewrite to handle the new feature.
Also print the name of unknown notations in verbose mode.
--
GnuPG-bug-id: 4060
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (getkey_ctx_s): New field found_via_akl.
(get_pubkey_byname): Set it.
(only_expired_enc_subkeys): New.
(get_best_pubkey_byname): Add support to refresh expired keys from the
WKD.
--
A little drawback of that code is that if the WKD has no update for an
expired key each access of the key will trigger a WKD lookup (unless
cached by the dirmngr). To avoid this we need to record the last time
we have checked for an update but that would in turn require that we
update the keyring for each check. We defer this until we have a
better key database which allows for fast updates of meta data.
Testing the code is currently a bit cumbersome because it requires to
update a key in the WKD several times. Eventually we we need a
network emulation layer to provide sample data for the regression
tests.
GnuPG-bug-id: 2917
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.h (agent_card_info_s): Rename the "*valid" fields to
"*len".
* g10/call-agent.c (unhexify_fpr): Change to take a FPRLEN and to
return the actual length.
(agent_release_card_info): Adjust for these changes.
* g10/card-util.c (print_sha1_fpr): Rename to print_shax_fpr and add
arg FPRLEN. Change all callers to pass the length.
(print_sha1_fpr_colon): Rename to print_shax_fpr_colon and add arg
FPRLEN. Change all callers to pass the length.
(fpr_is_zero): Add arg FPRLEN.
(fpr_is_ff): Ditto.
(show_card_key_info): Use the new functions.
* g10/skclist.c (enum_secret_keys): Use MAX_FINGERPRINT_LEN.
--
This is not needed right now but we should get rid of all hard coded
fingerprint lengths. Thus this change.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/skclist.c (enum_secret_keys): Since "KEY-FPR" returns
fingerprint in binary, change it to hex string.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (enum_secret_keys): Move to...
* g10/skclist.c (enum_secret_keys): ... here.
--
The function enum_secret_keys is not used by gpgv.c, but it is in
getkey.c. Extending enum_secret_keys will require change of gpgv.c,
so moving the function to the file for gpg is better.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (enum_secret_keys): Fix comment for usage of
enum_secret_keys, following the previous change.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (enum_secret_keys): Collecting keys in the context,
check duplicate to make sure returning only unique keys.
* g10/pubkey-enc.c (get_session_key): Now, it's the responsibility of
enum_secret_keys to free keys.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (struct mainproc_context): It's now pubkey_enc_list.
(do_proc_packets): Remove the first arg CTRL. Fix call of
proc_pubkey_enc.
(release_list): Handle pubkey_enc_list.
(proc_pubkey_enc): Remove the first arg CTRL. Simply put the packet
to pubkey_enc_list.
(print_pkenc_list): Remove the last arg FAILED.
(proc_encrypted): Only call print_pkenc_list once.
Handle DEK here.
(proc_packets, proc_signature_packets, proc_signature_packets_by_fd)
(proc_encryption_packets): Fix call of do_proc_packets.
* g10/packet.h (struct pubkey_enc_list): Define.
* g10/pubkey-enc.c (get_it): Change the second argument K.
(get_session_key): Select session key by LIST, using enum_secret_keys.
* g10/gpgv.c (get_session_key): Change the second argument K.
* g10/test-stubs.c (get_session_key): Likewise.
--
Collect all PKT_PUBKEY_ENC packets, and then, process the
PKT_ENCRYPTED* packet.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/parse-packet.c (parse_symkeyenc): Use iobuf_get_noeof.
(parse_key): Likewise.
--
When EOF comes at parsing s2k.count, it is possible the value will
be (unsigned long)-1. Then, the result of S2K_DECODE_COUNT will be
undefined. This patch fixes undefined behavior.
Reported-by: Philippe Antoine
GnuPG-bug-id: 4093
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/call-dirmngr.c (MAX_WKD_RESULT_LENGTH): New.
(gpg_dirmngr_wkd_get): Use it.
--
WKD should return only a single key with just one UID. For key
rollover 2 keys may be send. A total of 256 KiB seems to be a
generous limit here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr-status.h: New.
* dirmngr/dirmngr.h: Include dirmngr-status.h and move some prototypes
to that file.
* dirmngr/t-support.c: New.
* dirmngr/Makefile.am (dirmngr_SOURCES): Add dirmngr-status.h.
(t_common_src): Add t-support.c.
* dirmngr/server.c (dirmngr_status_printf): Bypass if CTRL is NULL.
* dirmngr/dns-stuff.c: Include dirmngr-status.h.
(libdns_init): Print WARNING status line. Change call callers to take
and pass a CTRL argument.
* g10/call-dirmngr.c (ks_status_cb): Print info for new WARNING
status.
--
To test this you can change RESOLV_CONF_NAME in dns-stuff.c and run
gpg --recv-key -v SOMETHING.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/key-clean.c (clean_key): Rename to clean_all_uids and split
subkey cleaning into ...
(clean_all_subkeys): new. Call that always after the former clean_key
invocations.
--
Note that the clean_all_subkeys function will later be extended.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkey_for_sig): New.
(get_pubkeyblock_for_sig): New.
* g10/mainproc.c (issuer_fpr_raw): Give global scope.
(check_sig_and_print): Use get_pubkeyblock_for_sig.
* g10/pkclist.c (check_signatures_trust): Use get_pubkey_for_sig.
* g10/sig-check.c (check_signature2): Ditto.
(check_signature_over_key_or_uid): Ditto.
--
GnuPG-bug-id: 4046
The whole getkey stuff is still a mess with way to much duplication
and missing caching of already fetched data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (read_block): Add special treatment for bad user ids
and comment packets.
--
See
GnuPG-bug-id: 4022
for an example of a bogus user id.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sig-check.c (check_signature_end_simple): Check sign usage.
--
Without this patch the signature verification fails only due to the
missing back signature. This check better explains what went wrong.
GnuPG-bug-id: 4014
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (get_revocation_reason): New.
(list_standalone_revocation): Extend function.
--
Note that this function extends the "rvs" field signature-class (field
11) with the revocation reason. GPGME does not yet parse this but it
can be expected that the comma delimiter does not break other parsers.
A new field is added to the "rvs" (and in future also the "rev")
record to carry a record specific comment. Hopefully all parsers
meanwhile learned the lesson from other new fields and don't bail out
on more fields than they know about.
This is partial solution to
GnuPG-bug-id: 1173
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (impex_filter_getval): Add new "usage" property for
drop-subkey filter.
--
For example, this permits extraction of only encryption-capable
subkeys like so:
gpg --export-filter 'drop-subkey=usage !~ e' --export $FPR
GnuPG-Bug-id: 4019
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/gpg.c (main): Set some list options.
--
The new command --show-keys is commonly used to check the content of a
file with keys. In this case it can be expected that all included
subkeys and uids are of interested, even when they are already expired
or have been revoked.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_plaintext): Sanitize verbose output.
--
This fixes a forgotten sanitation of user supplied data in a verbose
mode diagnostic. The mention CVE is about using this to inject
status-fd lines into the stderr output. Other harm good as well be
done. Note that GPGME based applications are not affected because
GPGME does not fold status output into stderr.
CVE-id: CVE-2018-12020
GnuPG-bug-id: 4012
* g10/key-check.c (key_check_all_keysigs): Factor some code out to ...
(remove_duplicate_sigs): new.
(key_check_all_keysigs): Call remove_duplicate_sigs again after
reordering.
--
This is a follupup for commit 26bce2f01d
to cleanup the code and to add a second de-duplicate step when needed.
GnuPG-bug-id: 3994
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKG_siganture): Add field 'help_counter'.
* g10/key-check.c (sig_comparison): Take care of HELP_COUNTER.
(key_check_all_keysigs): De-duplicate on a per-block base.
--
The key_check_all_keysigs first does a detection of duplicate
signature. This is done over all signatures at once. The problem
here is for example:
key
uid_1
sig_uid_1.1
sig_uid_1.2
subkey_1
sig_sub_1.1
subkey_2
sig_sub_2.1
sig_sub_2.2 (duplicate of sig_sub_1.1)
Now the de-duplication deletes the first signature and keeps the
second. That works in most cases for foreign signature on userids but
in the above constellation the code simply removes sig_sub_1.1 so that
subkey_1 has no binding signature anymore. In a later step during
import the missing binding is detected and subkey_1 is removed because
it is not anymore valid. The sig_sub_2.2 will also be removed later
because it does not check out for subkey_2 (that is as expected).
The fix is to let the de-duplication work only on blocks (ie. within
the signatures of a user id or a subkey). This will not detect all
duplicates but that does not harm because later steps will detect and
remove them.
In the above case (with this patch applied) the second phase of
key_check_all_keysigs will reorder key signatures and move the
duplicate sig_sub_2.2 directly after sig_sub_1.1. This duplicates the
signature and for cleanness we should kick the de-duplication process
again. This will be done with a followup patch.
GnuPG-bug-id: 3994
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Print warning and later force an
error.
--
Note that when this error is triggered the plaintext from the literal
data packet has already been outputted before the BEGIN_DECRYPTION
status line. We fail only later to get more information. Callers
need to check and act upon the decryption error code anyway.
Thanks to Marcus for pointing out this case.
GnuPG-bug-id: 4000
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aShowKeys): New const.
(opts): New command --show-keys.
(main): Implement command.
* g10/import.c (import_keys_internal): Don't print stats in show-only
mode.
(import_one): Be silent in show-only mode.
--
Using
--import --import-options show-only
to look at a key is too cumbersome. Provide this shortcut and also
remove some diagnostic cruft in this case.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_pubkey_enc): Remove a comment.
--
GnuPG always uses the OpenPGP algo number in its status report.
We can find a function in GPGME, it's _gpgme_map_pk_algo.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (proc_encrypted): Print a hint for legacy ciphers w/o
MDC. Also print a dedicated status error code
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oAllowMultisigVerification)
(oAllowMultipleMessages, oNoAllowMultipleMessages): Remove.
(opts): Turn --allow-multisig-verification, --allow-multiple-messages
and --no-allow-multiple-messages into NOPs
* g10/options.h (struct opt): Remove flags.allow_multiple_messages.
* g10/mainproc.c (proc_plaintext): Assume allow_multiple_messages is
false.
--
These options are very old compatibility hacks and should not be used
anymore. We keep them as dummy options in case someone has them in
the conf file.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Make --pgp6 an alias for --pgp7.
* common/compliance.h (gnupg_compliance_mode): Remove CO_PGP6.
* g10/options.h (PGP6): Remove. Adjust all users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Tuen options --force-mdc, --no-force-mdc, --disable-mdc
and --no-disable-mdc into NOPs.
* g10/encrypt.c (use_mdc): Simplify. MDC is now almost always used.
(use_aead): Ignore MDC options. Print warning for missing MDC feature
flags.
* g10/pkclist.c (warn_missing_mdc_from_pklist): Rename to ...
(warn_missing_aead_from_pklist): this and adjust.
--
The MDC is now always used except with --rfc2440 which will lead to a
a big fat warning.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Require an MDC or AEAD
* tests/openpgp/defs.scm (create-gpghome): Use --ignore-mdc-error to
allow testing with the current files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oNoMDCWarn): Remove.
(opts): Make --no-mdc-warn a NOP.
(main): Don't set var.
* g10/options.h (struct opt): Remove 'no_mdc_var'.
* g10/cipher-cfb.c (write_header): Assume opt.no_mdc_warn is false.
* g10/mainproc.c (proc_encrypted): Ditto.
--
Users should not be allowed to suppress the warning that they are
shooting into their foot.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/compress.c (push_compress_filter2): Return an error if no filter
was pushed.
(push_compress_filter): Ditto.
(handle_compressed): Free CFX if no filter was pushed.
* g10/import.c (read_block): Ditto.
--
GnuPG-bug-id: 3898, 3930
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/compress.c (handle_compressed): Fix memory leak.
--
All other calls of push_compress_filter checks ALGO,
so, do it here, too.
GnuPG-bug-id: 3898
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (get_user_id_string): Add arg R_NOUID. Change call
callers.
(get_user_id): Add arg R_NOUID. Change call callers.
* g10/mainproc.c (issuer_fpr_string): Make global.
* g10/keylist.c (list_keyblock_colon): Print a '?' for a missing key
also in --list-mode. Print the "issuer fpr" field also if there is an
issuer fingerprint subpacket.
--
Scripts used to rely on the "User ID not found" string even in the
--with-colons listing. However, that is not a good idea because that
string is subject to translations etc. Now we have an explicit way of
telling that a key is missing. For example:
gpg --list-sigs --with-colons | \
awk -F: '$1=="sig" && $2=="?" {if($13){print $13}else{print $5}}'
Prints all keyids or fingerprint of signing keys for which we do not
have the key in our local keyring.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (issuer_fpr_raw): New.
(issuer_fpr_string): Re-implement using issuer_fpr_rtaw.
(check_sig_and_print): Don't free ISSUER_FPR. Use ISSUER_FPR_RAW.
Use write_status_printf. Extend ERRSIG status.
--
Modern OpenPGP implementations put the ISSUER_FPR into the signature
to make it easier to discover the, public needed to check the
signature. This is also useful in error messages and thus we add it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (g10_exit): Print STATUS_FAILURE only based on passed
return code and not on the presence of any call to log_error.
--
This fixes an actual regression in GPGME where FAILURE is considered
for example by a signature verify operation. The operation will simply
fail and not just record that that a signature could not be verified.
In particular for files with more than one signature a log_error if
often called to show that a pubkey is missing for one of the
signatures. Using that log_error is correct in that case.
Fixes-commit: 0336e5d1a7
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oNoSymkeyCache): New.
(opts): Add that option.
(main): Set var.
* g10/options.h (struct opt): New field no_symkey_cache.
* g10/passphrase.c (passphrase_to_dek): Implement that feature.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (write_status_failure): Make it print only once.
* g10/gpg.c (wrong_args): Bump error counter.
(g10_exit): Print a FAILURE status if we ever did a log_error etc.
(main): Use log_error instead of log_fatal at one place. Print a
FAILURE status for a bad option. Ditto for certain exit points so
that we can see different error locations.
--
This makes it easier to detect errors by tools which have no way to
get the exit code (e.g. due to double forking).
GnuPG-bug-id: 3872
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (IS_BACK_SIG): New.
* g10/sig-check.c: Re-indent and use macros.
--
This makes the code easier to understand.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (ask_card_rsa_keysize): Don't show message here.
(ask_card_keyattr): Show message when change, also for ECC.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/card-util.c (gen_kdf_data): Support single salt.
(kdf_setup): Can have argument for single salt.
* scd/app-openpgp.c (pin2hash_if_kdf): Support single salt.
--
Gnuk has "admin-less" mode. To support "admin-less" mode with KDF
feature, salt should be same for user and admin. Thus, I introduce a
valid use of single salt.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/card-util.c (ask_card_rsa_keysize): Drop support for magic
number 25519 for ed25519/cv25519. Rename from ask_card_keyattr.
(ask_card_keyattr): Support ECC, as well as RSA.
(do_change_keyattr): Support ECC dropping magical number 25519.
* g10/keygen.c (ask_curve): Allow call from outside, adding last arg
of CURRENT.
(generate_keypair): Follow the change of ask_curve.
(generate_subkeypair): Likewise.
--
GnuPG-bug-id: 3781
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/card-util.c (generate_card_keys): Check PIN later.
(card_generate_subkey): Likewise.
--
Changing key attribute resets PIN authentication status. So, CHECKPIN
should be after that, before key generation. Note that CHECKPIN is
done for binding signature.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/tdbio.c (tdbio_read_record): Return GPG_ERR_EOF.
(tdbio_new_recnum): Never return on error.
(lookup_hashtable): Print a more descriptive error in case of !TABLE.
--
Also: tdbio_new_recnum had a bug in that it returned an error code and
not a record number in the error case. The function is expected to
always return a valid new record number.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tdbio.c (is_locked): Turn into a counter.
(take_write_lock, release_write_lock): Implement recursive locks.
--
On trustdb creation we have this call sequence:
init_trustdb -> takes lock
tdbio_set_dbname
create_version_record
tdbio_write_record
put_record_into_cache -> takes lock
put_record_into_cache -> releases lock
init_trustdb -> releases lock
The second take lock does noting but the first release lock has
already released the lock and the second release lock is a thus a NOP.
This is likely the cause for the corrupted trustdb as reported in
GnuPG-bug-id: 3839
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tdbio.c (in_transaction): Comment this var.
(put_record_into_cache): Comment the transaction code.
(tdbio_sync): Ditto
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oRequestOrigin): New const.
(opts): New option --request-origin.
(main): Parse that option.
* g10/options.h (struct opt): Add field request_origin.
* g10/call-agent.c (start_agent): Send option to the agent.
* sm/gpgsm.c (oRequestOrigin): New const.
(opts): New option --request-origin.
(main): Parse that option.
* sm/gpgsm.h (struct opt): Add field request_origin.
* sm/call-agent.c (start_agent): Send option to the agent.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (enum_sig_subpkt): Check buflen before reading
the type octet. Print diagnostic.
--
If the final subpacket has only a length header evaluating to zero and
missing the type octet, a read could happen right behind the buffer.
Valgrind detected this. Fix is obvious. Note that the further
parsing of the subpacket is still okay because it always checks the
length. Note further that --list-packets uses a different code path
and already reported an error.
Reported-by: Philippe Antoine
He provided a test file copied below. Running "gpg -v --verify" on it
triggered the bug.
-----BEGIN PGP ARMORED FILE-----
Comment: Use "gpg --dearmor" for unpacking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=qYZP
-----END PGP ARMORED FILE-----
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (factory_reset): Dummy PIN size is now 32-byte.
Connect the card again at the last step.
--
Before the change, a user has to quit the session to continue. Now,
it is possible to type RET in the session and see if it's really done.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
WIN32_LEAN_AND_MEAN is required to avoid definitions of grp1, grp2,
and grp3 in dlgs.h, which is included by windows.h.
Fixes-commit: fd595c9d36
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
Sorry, I accidentally pushed the last commit without having amended it
with this fix.
Fixes-commit: fd595c9d36
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.h (agent_card_info_s): Add fields grp1, grp2 and
grp3.
* g10/call-agent.c (unhexify_fpr): Allow for space as delimiter.
(learn_status_cb): Parse KEYPARIINFO int the grpX fields.
* g10/card-util.c (print_keygrip): New.
(current_card_status): Print "grp:" records or with --with-keygrip a
human readable keygrip.
--
Suggested-by: Peter Lebbing <peter@digitalbrains.com>
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cipher-aead.c (write_header): Do not call set_nonce_and_ad.
(write_final_chunk): Do not increase chunkindex.
(do_flush): Call set_nonce_and_ad immediately before the first
encryption of a chunk. Bump up the chunkindex after writing the tag.
(do_free): Do not insert a zero length last chunk.
* g10/decrypt-data.c (aead_underflow): Fix the corresponding bug.
--
This fixes a bug in writing a zero length last chunk right before the
final chunk (which has by design a zero length). We also need to
adjust the decryption part because that assumed this zero length last
chunk.
Note that we use the term "last chunk" for the chunk which directly
precedes the "final chunk" which ends the entire encryption.
GnuPG-bug-id: 3774
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cipher-aead.c (set_nonce, set_additional_data): Merge into ...
(set_nonce_and_ad): new function.
(write_auth_tag): Print error message here.
(do_flush): Rename var newchunk to finalize.
--
There is no need to have separate functions here. We should also
print a error message for writing the final tag.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (aead_set_nonce, aead_set_ad): Merge into ...
(aead_set_nonce_and_ad): new single function. Change callers.
(decrypt_data): Do not set the nonce and ad here.
(aead_underflow): Get rid of the LAST_CHUNK_DONE hack.
--
The main change here is that we now re-init the context only right
before we decrypt and not after a checktag.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (aead_underflow): Factor reading and checking
code code out to ...
(fill_buffer, aead_checktag): new functions.
--
Here is a simple test script to check against a set of encrypted files
with naming convention like "symenc-aead-eax-c6-56.asc"
# ------------------------ >8 ------------------------
set -e
GPG=../g10/gpg
for file in "$@"; do
echo "${file##*/}" | ( IFS=- read dummy1 dummy2 mode cbyte len rest
len="${len%.*}"
cbyte="${cbyte#c}"
[ "$dummy1" != "symenc" -o "$dummy2" != "aead" ] && continue
echo "checking mode=$mode chunkbyte=$cbyte length=$len"
if ! $GPG --no-options --rfc4880bis --batch --passphrase "abc" \
-d < $file >tmp.plain 2>/dev/null; then
echo "Decryption failed for $file" >&2
exit 2
fi
plainlen=$(wc -c <tmp.plain)
if [ $plainlen -ne $len ]; then
echo "Plaintext length mismatch for $file (want=$len have=$plainlen)" >&2
exit 2
fi
)
done
echo "all files are okay" >&2
# ------------------------ 8< ------------------------
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cipher-aead.c (write_final_chunk): Do not bump up the chunk
index if the previous chunk was empty.
* g10/decrypt-data.c (aead_underflow): Likewise. Also handle a other
corner cases. Add more debug output.
--
GnuPG-bug-id: 3774
This fixes the reported case when the encrypted data is a multiple of
the chunk size. Then the chunk index for the final chunk was wrongly
incremented by 2. The actual fix makes use of the fact that the
current dfx->CHUNKLEN is 0 in this case. There is also some other
reorganizing to help with debugging. The thing seems to work now but
the code is not very clean - should be reworked. Creating test files
can be done with this script:
--8<---------------cut here---------------start------------->8---
csize=6
for len in 0 55 56 57; do
awk </dev/null -v i=$len 'BEGIN{while(i){i--;printf"~"}}' \
| gpg --no-options -v --rfc4880bis --batch --passphrase "abc" \
--s2k-count 1025 --s2k-digest-algo sha256 -z0 \
--force-aead --aead-algo eax --cipher aes -a \
--chunk-size $csize -c >symenc-aead-eax-c$csize-$len.asc
done
--8<---------------cut here---------------end--------------->8---
A LEN of 56 triggered the bug which can be seen by looking at the
"authdata:" line in the --debug=crypt,filter output.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (parse_keyblock_image): Use log_info instead of
log_error for skipped packets.
* g10/keyring.c (keyring_get_keyblock): Ditto.
--
log_info should be sufficient and makes this more robust. Some
tools (e.g. Enigmail) are too picky on return codes from gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_symkeyenc): Move error printing to the
end. Add additional check to cope for the 0je extra bytes needed for
AEAD.
--
Fixes-commit: 9aab9167bc
GnuPG-bug-id: 3780
* g10/gpg.c (opts): Add new option.
(opt_set_iobuf_size): New var.
(set_debug): Set the option.
* tests/openpgp/armor.scm: Use this option to revert the buffer size
to the one which used to exhibit the tested bugs.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cipher-aead.c (do_flush): Init ERR. Fix remaining chunklen
computation.
(do_free): Add dummy encryption. Close the cipher handle.
* g10/decrypt-data.c (aead_underflow): Rewrite.
--
Until we have integrated test into the test suite extensive tests can
also be done with a script like this:
--8<---------------cut here---------------start------------->8---
#!/bin/sh
set -e
GPG="../g10/gpg --rfc4880bis --pinentry-mode=loopback"
GPG="$GPG --passphrase abc --batch"
MKTDATA="$HOME/b/gnupg-2.0/tools/mk-tdata"
for chunksize in 6 7 12 13 14 30; do
for count in $(seq 1 200) $(seq 8100 8200) \
$(seq 16350 16400) $(seq 20000 20100); do
if [ ! -f "testfile-$count" ]; then
$MKTDATA $count >"testfile-$count"
fi
echo "testing chunk size 2^$chunksize with $count bytes"
$GPG --force-aead --aead-algo ocb --s2k-mode 0 --cipher AES -v -z 0 \
-c --chunk-size $chunksize \
<"testfile-$count" >"testfile-$count.gpg" 2>/dev/null
$GPG -vd <"testfile-$count.gpg" >"testfile-$count.out" 2>/dev/null
if ! cmp "testfile-$count" "testfile-$count.out"; then
echo "FAILED comparing count $count" >&2
exit 1
fi
done
done
echo All good
--8<---------------cut here---------------end--------------->8---
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (decode_filter_context_s): Rename field 'defer'
to 'holdback' and replace 'defer_filled' flag into 'holdbacklen'.
Change all users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (fixup_uidnode): Copy the AEAD prefs.
--
With this patch AEAD preferences are now properly created and
displayed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_symkey_enc): Clear the symmetric key cache on
error.
(proc_encrypted): Need to take are of the checksum error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_symkey_enc): Add field aead_algo.
* g10/build-packet.c (do_symkey_enc): Support version 5 packets.
* g10/parse-packet.c (parse_symkeyenc): Ditto.
* g10/encrypt.c (encrypt_symmetric): Force using a random session
key in AEAD mode.
(encrypt_seskey): Add and support arg aead_algo.
(write_symkey_enc): Ditto.
(encrypt_simple): Adjust accordingly.
(encrypt_filter): Ditto.
* g10/gpgcompose.c (sk_esk): For now call encrypt_seskey without AEAD
support.
* g10/mainproc.c (symkey_decrypt_seskey): Support AEAD. Nver call BUG
but return an error.
(proc_symkey_enc): Call symkey_decrypt_seskey in a bug compatible way.
* g10/import.c (check_prefs): Check AEAD preferences.
* g10/keyedit.c (show_prefs): Print AEAD preferences.
--
For easier debugging this patch also changes some diagnostics to also
print the encryption mode with the cipher algorithm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (select_aead_from_pklist): Return the AEAD_algo.
* g10/encrypt.c (use_aead): Return the AEAD algo.
(encrypt_simple): Adjust for this change.
(encrypt_crypt): Ditto.
(encrypt_filter): Ditto.
* g10/sign.c (sign_symencrypt_file): Ditto.
* g10/misc.c (MY_GCRY_CIPHER_MODE_EAX): New.
(openpgp_aead_algo_info): New.
* g10/cipher-aead.c (MY_GCRY_CIPHER_MODE_EAX): Remove.
(write_header): Use new fucntion.
* g10/decrypt-data.c (MY_GCRY_CIPHER_MODE_EAX): Remove.
(decrypt_data): Use new function. Also allow for chunkbytes other
than 10.
--
Note that other chunk bytes than 10 and in particular 0 (64 byte
chunks) have not yet been tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/encrypt.c (encrypt_seskey): Allocate the buffer for the
encrypted key and returns that buffer and its length.
(encrypt_simple): Adjust for above change.
(write_symkey_enc): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cipher-aead.c (MY_GCRY_CIPHER_MODE_EAX): New.
(write_header): Use it.
* g10/decrypt-data.c (MY_GCRY_CIPHER_MODE_EAX): New.
(decrypt_data): Use it.
* g10/misc.c (openpgp_aead_test_algo): Allow EAX.
--
This allows the use of EAX when the latest Libgcrypt master is used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgpdefs.h (PKT_ENCRYPTED_AEAD): New const.
* g10/dek.h (DEK): Increase size of use_aead to 4 bits.
* g10/filter.h (cipher_filter_context_t): Add new fields for AEAD.
* g10/packet.h (PKT_encrypted): Add fields aead_algo, cipher_algo, and
chunkbyte.
* g10/build-packet.c (do_encrypted_aead): New.
(build_packet): Call it.
* g10/parse-packet.c (dump_sig_subpkt): Handle SIGSUBPKT_PREF_AEAD.
(parse_one_sig_subpkt, can_handle_critical): Ditto.
(parse_encrypted): Clear new PKT_ENCRYPTED fields.
(parse_encrypted_aead): New.
(parse): Call it.
* g10/gpg.c (main): Take care of --rfc4880bis option when checking
compliance.
* g10/cipher-aead.c: Replace the stub by real code.
* g10/decrypt-data.c (decode_filter_ctx_t): Add fields for use with
AEAD.
(aead_set_nonce): New.
(aead_set_ad): New.
(decrypt_data): Support AEAD.
(aead_underflow): New.
(aead_decode_filter): New.
* g10/encrypt.c (use_aead): Make that new fucntion work.
(encrypt_simple): Use default_aead_algo() instead of EAX.
* g10/mainproc.c (proc_encrypted): Support AEAD.
(do_proc_packets): Support PKT_ENCRYPTED_AEAD.
--
This code has seen only a very few manual tests. Encrypting always
uses a 64k chunks and decryption has not been tested with larger
chunks. Those small chunks make debugging much faster.
Tests can be done using:
gpg --rfc4880bis --pinentry-mode=loopback --passphrase abc \
--force-aead --aead-algo ocb --s2k-mode 0 --cipher AES \
-v -z 0 --status-fd 2 -c <INFILE >OUTFILE
and
gpg --rfc4880bis --pinentry-mode=loopback --passphrase=abc \
--status-fd 2 -v -d <INFILE >OUTFILE
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (parse_key_parameter_part): Add arg clear_cert.
(parse_key_parameter_string): Add arg suggested_use and implement
fallback. Change callers to pass 0 for new arg.
(parse_algo_usage_expire): Pass the parsed USAGESTR to
parse_key_parameter_string so that it can use it in case a subkey is
to be created.
--
The problem here was that future-default gives the primary and subkey
algorithm. However, when using future-default for adding a key, the
second part was always used which is for encryption. If the caller
now wanted to create a signing subkey using the future-default
parameters this did not worked.
gpg --batch --passphrase "" --quick-add-key FPR future-default encr
aready worked as did
gpg --batch --passphrase "" --quick-add-key FPR ed25519 sign
but
gpg --batch --passphrase "" --quick-add-key FPR future-default sign
does only work with this fix.
GnuPG-bug-id: 3747
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cipher.c (cipher_filter): Rename to cipher_filter_cfb.
* g10/cipher-aead.c: New. Right now only with a stub function.
* g10/Makefile.am (gpg_sources): Add file.
* g10/encrypt.c (encrypt_simple): Push either cipher_filter_cfb or
cipher_filter_aead.
(encrypt_crypt): Ditto.
(encrypt_filter): Ditto.
* g10/sign.c (sign_symencrypt_file): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/dek.h (DEK): Turn fields use_mdc, algo_printed and symmetric
into single bit vars. Make sure they are always set to 1 or 0.
(DEK): New field use_aead.
* g10/options.h (struct opt): New field force_aead.
* g10/pkclist.c (select_aead_from_pklist): New.
* g10/gpg.c (oForceAEAD): New const.
(opts): New options "--force-aead".
(main): Set new option.
* g10/encrypt.c (use_aead): New.
(encrypt_simple): Implement new flags DEK.use_aead.
(encrypt_crypt): Ditto.
(encrypt_filter): Ditto.
* g10/sign.c (sign_symencrypt_file): Ditto.
--
This patch should be enough to detect whether AEAD can be used.
Not tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_pubkey_enc): Use dedicated error code for
list-only and put the key into PKENC_LIST.
(print_pkenc_list): Take care of the new error code.
--
If the secret keys exist in --list-only mode it was not printed in
--list-only mode.
GnuPG-bug-id: 3718
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (parse_key_parameter_string): Allow "futuredefault" and
use case-insensitive matching
(quick_generate_keypair): Ditto.
(parse_algo_usage_expire): Ditto.
--
The man page is sometimes rendered in a way that the hyphen may be
not be considered as part of the string. And while at it we also
allow case-insensitivity.
GnuPG-bug-id: 3655
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/filter.h (cipher_filter_context_t): Remove unused filed
'create_mdc'. Turn field 'header' into a bit field. Add new fields
'short_blklen_warn' and 'short_blklen_count'.
* g10/cipher.c (write_header): Print a warning if MDC is not used.
(cipher_filter): Print a warning for long messages encrypted with a
short block length algorithm.
--
Note that to test this warning in a reliable way compression needs to
be disabled.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (default_recipient): Use hexfingerprint.
--
Note that on malloc failure this function now returns NULL instead of
terminating the process. However, under memory pressure any function
called latter will very likely fail as well.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkeys): Do not use xmalloc.
--
We eventually need to get rid of all xmallocs so that gpg won't fail
easily when we make more use of the s server mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (keygen_set_std_prefs): when producing default internal
personal-digest-preferences, keep the same order. When publishing
external preferences, state preference for SHA512 first.
--
SHA-512 has a wider security margin than SHA-256. It is also slightly
faster on most of the architectures on which GnuPG runs today. New
keys should publish defaults that indicate we prefer the stronger,
more performant digest.
Specifically, this changes --default-preference-list from:
SHA256 SHA384 SHA512 SHA224
to:
SHA512 SHA384 SHA256 SHA224
This patch deliberately avoids touching --personal-digest-preferences
(which itself would affect the default of --digest-algo and
--cert-digest-algo), so that public-facing cleartext signatures and
identity certifications will continue to be made with SHA256 by
default.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/trustdb.c (sanitize_regexp): Only escape operators.
--
Backport from master commit:
ccf3ba9208
To sanitize a regular expression, quoting by backslash should be only
done for defined characters. POSIX defines 12 characters including
dot and backslash.
Quoting other characters is wrong, in two ways; It may build an
operator like: \b, \s, \w when using GNU library. Case ignored match
doesn't work, because quoting lower letter means literally and no
much to upper letter.
GnuPG-bug-id: 2923
Co-authored-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/logging.c: Do not build any code if we can use the gpgrt_log
functions.
(log_logv_with_prefix): Rename to log_logv_prefix and change order of
args so that this function matches its printf like counterpart
gpgrt_logv_prefix. Change all callers.
(log_debug_with_string): Rename to log_debug_string. Change all
callers.
(log_printhex): Move first arg to end so that this function matches
its printf like counterpart gpgrt_log_printhex. Change all callers.
* common/logging.h: Divert to gpgrt/libgpg-error if we can use the
gpgrt_log functions.
(bug_at): Add inline versions if we can use the gpgrt_log functions.
* configure.ac (GPGRT_ENABLE_LOG_MACROS): Add to AH_BOTTOM.
(mycflags): Add -Wno-format-zero-length.
--
This patch enables the use of the log function from libgpgrt (aka
libgpg-error). Instead of checking a version number, we enable them
depending on macros set by recent gpg-error versions. Eventually the
whole divert stuff can be removed.
The -Wno-format-zero-length is required because log_printhex can be
called with an empty format string. Note that this is fully specified
standard C behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_plaintext): Fill up the allocated NAME.
--
This actually does not harm because we merely display a buffer
allocated by ourselves. However, we better tell Valgrind about it so
that we don't need to track this thing down ever again.
Test using a corrupted literal data packet:
echo cb 0a 75 ff 59 ae 90 d5 74 65 73 74 | \
undump |\
valgrind gpg --list-packets >/dev/null
Reported-by: Sebastian Schinzel
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (do_get_from_fd): Free the old buffer.
--
If the received input is longer than 200 characters we used to leak
the previous allocated buffer.
GnuPG-bug-id: 3528
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (current_card_status): String changes.
(change_sex): Description change.
(cmds): Add "salutation"; keep "sex" as an alias.
--
Note that we can't change the used values or tags but at least the UI
should show reflect the real purpose of the field.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (sanitize_regexp): Only escape operators.
--
To sanitize a regular expression, quoting by backslash should be only
done for defined characters. POSIX defines 12 characters including
dot and backslash.
Quoting other characters is wrong, in two ways; It may build an
operator like: \b, \s, \w when using GNU library. Case ignored match
doesn't work, because quoting lower letter means literally and no
much to upper letter.
GnuPG-bug-id: 2923
Co-authored-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/card-util.c (factory_reset): Simplify.
--
In this summer, I got report about old code before this change didn't
work with newer Yubikey. I got another report test version of OpenPGP
card V3.3 implementation didn't work, either. Then, I confirmed that
according to the OpenPGP card specification, the procedure of old code
is not expected by its author.
This change simplify "factory-reset" as simple.
Only versions of Gnuk 1.2.2, 1.2.3, 1.2.4, won't work with this
change. That's because the factory-reset feature of Gnuk was
introduced by reading the implementation of GnuPG, instead of reading
the specification. Gnuk 1.2.5 and later works well. All OpenPGPcard
implementations I have work well (2.0, 2.1, 2.2, test version of 3).
GnuPG-bug-id: 3286
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit d63b7966cd)
* g10/card-util.c (ask_card_keyattr): Handle special value 25519.
(do_change_keyattr): Allow changing to cv25519/ed25519.
(generate_card_keys): Ditto.
(card_generate_subkey): Ditto.
--
This is kludge to make it easier for gnuk to be switched into ECC
mode. This is basically the same change as
commit ea09b6cded
but without the string change in show_keysize_warning.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (ask_card_rsa_keysize): Rename to ask_card_keyattr.
(do_change_rsa_keysize): Rename to do_change_keyattr.
--
We want to support other algos than RSA and thus we need a better name
for the functions.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit f795f4529d)
* g10/card-util.c (ask_card_keyattr): Print "rsaNNNN".
--
This is a separate patch from the previous to avoid string changes
when backporting the other patch to 2.2.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (show_keysize_warning): Slightly change the text.
(ask_card_keyattr): Handle special value 25519.
(do_change_keyattr): Allow changing to cv25519/ed25519.
(generate_card_keys): Ditto.
(card_generate_subkey): Ditto.
--
This is kludge to make it easier for gnuk to be switched into ECC
mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (ask_card_rsa_keysize): Rename to ask_card_keyattr.
(do_change_rsa_keysize): Rename to do_change_keyattr.
--
We want to support other algos than RSA and thus we need a better name
for the functions.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (factory_reset): Simplify.
--
In this summer, I got report about old code before this change didn't
work with newer Yubikey. I got another report test version of OpenPGP
card V3.3 implementation didn't work, either. Then, I confirmed that
according to the OpenPGP card specification, the procedure of old code
is not expected by its author.
This change simplify "factory-reset" as simple.
Only versions of Gnuk 1.2.2, 1.2.3, 1.2.4, won't work with this
change. That's because the factory-reset feature of Gnuk was
introduced by reading the implementation of GnuPG, instead of reading
the specification. Gnuk 1.2.5 and later works well. All OpenPGPcard
implementations I have work well (2.0, 2.1, 2.2, test version of 3).
GnuPG-bug-id: 3286
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/key-check.c (print_info): New.
(key_check_all_keysigs): Print sig checking results only in debug
mode. Prettify the stats info and suppress them in quiet mode.
--
This also makes usable stats by prefixing them with the key and the
program name.
GnuPG-bug-id: 3397
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (KEYEDIT_NEED_SUBSK): New.
(cmds): Add this flag to keytocard, bkuptocard, expire, and passwd.
(keyedit_menu): Check whether only subkeys are available and take care
of that in the command check and in the HELP listing. Also print a
different notice if only subkeys are available.
--
Print "Secret key is available" and the bailing out in all commands
which require the _primary_ secret key was surprising. Now we print
another notice and adjust the checks.
GnuPG-bug-id: 3463
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (KEYEDIT_NOT_SK, KEYEDIT_ONLY_SK): Remove.
(cmds): Remove them.
--
These flags were cruft from the time we had to switch between secret
and public key view.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (generate_subkeypair): Ignore error code issued for
trying to verify a card based key.
--
We try to verify the primary key and thus seed the passphrase cache
before generating the subkey. However, the verification does not yet
work for on-card keys and thus the PASSWD --verify send to the agent
returns an error. This patch detects this error and continues without
a seeded passphrase cache. After all that pre-seeding is just a
convenience.
GnuPG-bug-id: 3280
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_one): Pass FROM_SK to list_keyblock_direct.
--
Note that this will likely add the suffix '#' top "sec" because the
secret key has not yet (or will not be) imported. If the secret key
already exists locally another suffix might be printed. The upshot is
that the suffix has no usefulness.
GnuPG-bug-id: 3431
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_secret_one): Check for dry-run before
transferring keys.
--
The use of --dry-run or --import-option show-only had no effect when
importing a secret key and the public key already existed. If the
public key did not exist an error message inhibited the import of the
secret key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (find_and_check_key): Call get_validity on a specific
keyblock.
--
When we have multiple keyrings, get_validity after
get_best_pubkey_byname should access same keyring. Or else, the
situation of an expired key in keyring A but valid key in keyring B
causes SEGV.
Thanks to Guido Günther for the use case and the log.
Debian-bug-id: 878812
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keydb.c (keydb_handle): New field 'keep_lock'.
(keydb_release): Clear that flag.
(keydb_lock): New function.
(unlock_all): Skip if KEEP_LOCK is set.
* g10/getkey.c (get_keyblock_byfprint_fast): Call keep_lock if
requested.
--
That change is straightforward. It helps to avoid the race condition
that another gpg process inserts a key while the first process is
between the search and the insert.
A similar change is due for gpgsm.
Note that the key edit operations may still suffer from a race.
GnuPG-bug-id: 3446
* g10/getkey.c (get_pubkey_byfprint_fast): Factor most code out to ...
(get_keyblock_byfprint_fast): .. new function.
* g10/import.c (revocation_present): s/int rc/gpg_error_t err/.
(import_one): Use get_keyblock_byfprint_fast to get the keyblock and a
handle. Remove the now surplus keyblock fetch in the merge branch.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_keys_internal): Return gpg_error_t instead of
int. Change var names.
(import_keys_es_stream): Ditto.
(import_one): Ditto. Use a single keydb_new and simplify the use of
of keydb_release.
--
Note that this opens a keydb handle before we call
get_pubkey_byfprint_fast which internally uses another key db handle.
A further patch will cleanup this double use. Note that we also
disable the keydb caching for the insert case.
The s/int/gpg_error_t/ has been done while checking the call chains of
the import functions and making sure that gpg_err_code is always used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (find_and_check_key): Call get_validity on a specific
keyblock.
--
When we have multiple keyrings, get_validity after
get_best_pubkey_byname should access same keyring. Or else, the
situation of an expired key in keyring A but valid key in keyring B
causes SEGV.
Thanks to Guido Günther for the use case and the log.
Debian-bug-id: 878812
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keydb.c (keydb_handle): New field 'keep_lock'.
(keydb_release): Clear that flag.
(keydb_lock): New function.
(unlock_all): Skip if KEEP_LOCK is set.
* g10/getkey.c (get_keyblock_byfprint_fast): Call keep_lock if
requested.
--
That change is straightforward. It helps to avoid the race condition
that another gpg process inserts a key while the first process is
between the search and the insert.
A similar change is due for gpgsm.
Note that the key edit operations may still suffer from a race.
GnuPG-bug-id: 3446
* g10/getkey.c (get_pubkey_byfprint_fast): Factor most code out to ...
(get_keyblock_byfprint_fast): .. new function.
* g10/import.c (revocation_present): s/int rc/gpg_error_t err/.
(import_one): Use get_keyblock_byfprint_fast to get the keyblock and a
handle. Remove the now surplus keyblock fetch in the merge branch.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_keys_internal): Return gpg_error_t instead of
int. Change var names.
(import_keys_es_stream): Ditto.
(import_one): Ditto. Use a single keydb_new and simplify the use of
of keydb_release.
--
Note that this opens a keydb handle before we call
get_pubkey_byfprint_fast which internally uses another key db handle.
A further patch will cleanup this double use. Note that we also
disable the keydb caching for the insert case.
The s/int/gpg_error_t/ has been done while checking the call chains of
the import functions and making sure that gpg_err_code is always used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (build_conflict_set): Do not assume MAX_FINGERPRINT_LEN
is the size of the fingerprint.
--
This problem was exhibited by
commit ecbbafb88d.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/pkscreening.c: New.
* common/pkscreening.h: New.
* common/Makefile.am (common_sources): Add them.
* g10/gpg.c (opts): New option --with-key-screening.
* g10/options.h (struct opt): New field with_key_screening.
* g10/keylist.c: Include pkscreening.h.
(print_pk_screening): New.
(list_keyblock_print): Call it.
(print_compliance_flags): Call it.
* sm/gpgsm.c (opts): New option --with-key-screening.
* sm/gpgsm.h (scruct opt): New field with_key_screening.
* sm/keylist.c: Include pkscreening.h.
(print_pk_screening): New.
(print_compliance_flags): Call it. Add new arg cert.
(list_cert_colon): Pass arg cert
(list_cert_std): Call print_pk_screening.
* sm/fingerprint.c (gpgsm_get_rsa_modulus): New.
--
This new option can be used to detect ROCA affected keys. To scan an
entire keyring and print the affected fingerprints use this:
gpg -k --with-key-screening --with-colons | gawk -F: \
'$1~/pub|sub|sec|ssb|crt/ && $18~/\<6001\>/ {found=1;next};
$1=="fpr" && found {print $10}; {found=0}'
The same works for gpgsm. Note that we need gawk due to the "\<" in
the r.e.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trust.c (register_trusted_key): Cut off everthing starting as a
hash sign.
--
This problem is fallout from
commit f99830b728
which fixes
GnuPG-bug-id: 1206
The same could happen with other options taking keyids but we won't
change that because a trailing '#' does not indicate a comment. So
this is really only a workaround and eventually we will
deprecate --trusted-key anyway or require a fingerprint as a value.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (change_cafpr): Use MAX_FINGERPRINT_LEN.
* g10/cipher.c (write_header): Use snprintf.
* g10/gpg.h (MAX_FINGERPRINT_LEN): Change to 32.
(MAX_FORMATTED_FINGERPRINT_LEN): Change to 59
* g10/keyid.c (format_hexfingerprint): Add v5 fingerprint format.
* g10/tofu.c (get_policy): Use MAX_FINGERPRINT_LEN for the buffer but
keep the raw length for now.
--
Note that this patch only increases the size of the buffer and adds a
new formatting for v5 fingerprints. Moe work is required to fix
internal data structures like those in trustdb.gpg and the tofu
tables.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (ENABLE_LOG_CLOCK): New ac_define and option.
* common/logging.c (log_clock): Use ENABLE_LOG_CLOCK to enable
timestamp printing.
* g10/call-agent.c (agent_pksign): Time signing.
* g10/sig-check.c (check_signature_end_simple): Time verification.
--
Timing for verification is limited to data signatures because this is
the most common thing to evaluate. We should consider to change
log_clock to printf style so that we could print the signature class
and other info.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpgv.c (main): Call gnupg_initialize_compliance.
--
The compliance checker needs to be initialize so that it won't let
spit out a "not suitable" message. We use the module name of gpg.
Because there is no option to change the compliance mode in gpgv we
will always be in the default (CO_GNUPG) mode. It also does not make
much sense to have it here because gpgv expects a "curated" keyring.
GnuPG-bug-id: 3404
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (proc_parameter_file): Special case the email only
case.
--
Using a parameter file like
%ask-passphrase
key-type: RSA
key-length: 2048
key-usage: sign
subkey-type: RSA
subkey-length: 2048
subkey-usage: encrypt
name-email: foo@example.org
with "gpg --gen-key --patch" the result was this key
pub rsa2048 2017-09-11 [SC]
63A8C1BA12CC289A0E8072C971C7F8D4A18CE0BE
uid [ultimate] <foo@example.org>
sub rsa2048 2017-09-11 [E]
At least the the extra leading space the left angle bracket is wrong.
Further some mail providers reject keys which consist of more than
just a plain mail address. Using just a mail address is anyway the
new new suggested content for a user id. With this patch the key
will be
pub rsa2048 2017-09-11 [SC]
B302343C20EA6DECDB6A155135352F2520397080
uid [ultimate] foo@example.org
sub rsa2048 2017-09-11 [E]
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/main.h (DEFAULT_CIPHER_ALGO): Prefer AES256 by default.
--
It's 2017, and pretty much everyone has AES-256 available. Symmetric
crypto is also rarely the bottleneck (asymmetric crypto is much more
expensive). AES-256 provides some level of protection against
large-scale decryption efforts, and longer key lengths provide a hedge
against unforseen cryptanalysis.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/command.c (hlp_genkey): update help text to suggest the use of
3072 bits.
* doc/wks.texi: Make example match default generation.
* g10/keygen.c (DEFAULT_STD_KEY_PARAM): update to
rsa3072/cert,sign+rsa3072/encr, and fix neighboring comment,
(gen_rsa, get_keysize_range): update default from 2048 to 3072).
* g10/keyid.c (pubkey_string): update comment so that first example
is the default 3072-bit RSA.
--
3072-bit RSA is widely considered to be 128-bit-equivalent security.
This is a sensible default in 2017.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic update-defaults
Gbp-Pq: Name 0015-gpg-default-to-3072-bit-RSA-keys.patch
* g10/sig-check.c (check_signature_over_key_or_uid): Remove useless
condition. Actually free when SIGNER was allocated by us.
--
SIGNER_ALLOCATED never received a value of -1 but that was tested.
IF SIGNER_ALLOCATED was 2 the memory was never freed:
if (signer_allocated == 1)
if (signer_allocated == 2)
free()
Fixes-commit: 44cdb9d73f
This function needs to be audited more thoroughly.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
This is to make those function better readable.
if (foo)
/* Comment */
{
}
is bad style because it requires extra time to notice the begin of the
block and vice versa when noticing the block it is not clear whether
this is an conditioned or unconditioned block.
Having asterisks on the left is better for view impaired people and
for b/w printouts.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (gpgconf_list): Announce "auto-key-retrieve".
(main): Simplify setting of KEYSERVER_AUTO_KEY_RETRIEVE.
* tools/gpgconf-comp.c: Make "no-auto-key-retrieve" invisible. Make
"auto-key-retrieve" an expert option.
--
This basically reverts 9bb13a0e81
because --no-auto-key-retrieve is again the default. Note that we
allow both options for the sake of profiles.
Signed-off-by: Werner Koch <wk@gnupg.org>
