* g10/trustdb.c (verify_own_keys): Silence informational diagnostic.
--
This silences these notes with --quiet
gpg: Note: RFC4880bis features are enabled.
gpg: key EE65E8C75D41FD1D marked as ultimately trusted
GnuPG-bug-id: 4634
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Add option.
(main): Set flag.
* g10/options.h: Add flags.use_only_openpgp_card.
* g10/call-agent.c (start_agent): Implement option.
--
With the previous patch we switch to autoselect an application
instead of requesting an openpgp card. This option allows to revert
this in case of use use cases which expected the former behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit c185f6dfbd)
This was first added to the 2.2 branch.
* g10/gpg.c (main): Change default.
--
Due to the DoS attack on the keyeservers we do not anymore default to
import key signatures. That makes the keyserver unsuable for getting
keys for the WoT but it still allows to retriev keys - even if that
takes long to download the large keyblocks.
To revert to the old behavior add
keyserver-optiions no-self-sigs-only,no-import-clean
to gpg.conf.
GnuPG-bug-id: 4607
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aLocateExtKeys): New.
(opts): Add --locate-external-keys.
(main): Implement that.
* g10/getkey.c (get_pubkey_byname): Implement GET_PUBKEY_NO_LOCAL.
(get_best_pubkey_byname): Add arg 'mode' and pass on to
get_pubkey_byname. Change callers.
* g10/keylist.c (public_key_list): Add arg 'no_local'.
(locate_one): Ditto. Pass on to get_best_pubkey_byname.
--
This new command is a shortcut for
--auto-key-locate nodefault,clear,wkd,... --locate-key
and uses the default or configured AKL list but does so without local.
See also
GnuPG-bug-id: 4599
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (g10_exit): Block all signals before calling
emergency_cleanup.
--
There is a race condition here which results crash of the process.
When a signal is delivered in emergency_cleanup, it is called again.
This change fixes the problem.
GnuPG-bug-id: 2747
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/objcache.c: New.
* g10/objcache.h: New.
* g10/Makefile.am (common_source): Add them.
* g10/gpg.c: Include objcache.h.
(g10_exit): Call objcache_dump_stats.
* g10/getkey.c: Include objcache.h.
(get_primary_uid, release_keyid_list): Remove.
(cache_user_id): Remove.
(finish_lookup): Call the new cache_put_keyblock instead of
cache_user_id.
(get_user_id_string): Remove code for mode 2.
(get_user_id): Implement using cache_get_uid_bykid.
--
This generic caching module is better than the ad-hoc code we used in
getkey.c. More cleanup in getkey is still required but it is a
start. There is also a small performance increase with the new cache:
With a large keyring and --list-sigs I get these numbers:
| | before | after |
|------+------------+------------|
| real | 14m1.028s | 12m16.186s |
| user | 2m18.484s | 1m36.040s |
| sys | 11m42.420s | 10m40.044s |
Note the speedup in the user time which is due to the improved cache
algorithm. This is obvious, because the old cache was just a long
linked list; the new cache are two hash tables.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR16)
(KEYDB_SEARCH_MODE_FPR20, KEYDB_SEARCH_MODE_FPR32): Remove. Switch
all users to KEYDB_SEARCH_MODE_FPR along with the fprlen value.
--
These search modes were added over time and there has until recently
be no incentive to remove the cruft. With the change for v5 keys I
finally went over all places and allowed the generic fingerprint mode
along with a given length of the fingerprint at all places.
Consequently the other modes can now be removed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (set_compliance_option, main): Change CO_GNUPG to include
rfc4880bis features.
(main): Change rfc4880bis warning to a note.
--
Note that the default is CO_GNUPG and not CO_OPENPGP. CO_OPENPGP does
not include rfc4880bis yet and has a couple of things we don't like,
like --allow-non-selfsigned-uids.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/userids.c (classify_user_id): Support 32 byte fingerprints.
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR32): New.
(struct keydb_search_desc): Add field fprlen.
* kbx/keybox-defs.h (struct _keybox_openpgp_key_info): Add field
version and increase size of fpr to 32.
* kbx/keybox-blob.c: Define new version 2 for PGP and X509 blobs.
(struct keyboxblob_key): Add field fprlen and increase size of fpr.
(pgp_create_key_part_single): Allow larger fingerprints.
(create_blob_header): Implement blob version 2 and add arg want_fpr32.
(_keybox_create_openpgp_blob): Detect the need for blob version 2.
* kbx/keybox-search.c (blob_get_first_keyid): Support 32 byte
fingerprints.
(blob_cmp_fpr): Ditto.
(blob_cmp_fpr_part): Ditto.
(has_fingerprint): Add arg fprlen and pass on.
(keybox_search): Support KEYDB_SEARCH_MODE_FPR32 and adjust for
changed has_fingerprint.
* kbx/keybox-openpgp.c (parse_key): Support version 5 keys.
* kbx/keybox-dump.c (_keybox_dump_blob): Support blob version 2.
* g10/delkey.c (do_delete_key): Support KEYDB_SEARCH_MODE_FPR32.
* g10/export.c (exact_subkey_match_p): Ditto.
* g10/gpg.c (main): Ditto.
* g10/getkey.c (get_pubkey_byfprint): Adjust for changed
KEYDB_SEARCH_MODE_FPR.
* g10/keydb.c (keydb_search_desc_dump): Support
KEYDB_SEARCH_MODE_FPR32 and adjust for changed KEYDB_SEARCH_MODE_FPR.
(keydb_search): Add new arg fprlen and change all callers.
* g10/keyedit.c (find_by_primary_fpr): Ditto.
* g10/keyid.c (keystr_from_desc): Ditto.
* g10/keyring.c (keyring_search): Ditto.
* g10/keyserver.c (print_keyrec): Ditto.
(parse_keyrec): Ditto.
(keyserver_export): Ditto.
(keyserver_retrieval_screener): Ditto.
(keyserver_import): Ditto.
(keyserver_import_fprint): Ditto.
(keyidlist): Ditto.
(keyserver_get_chunk): Ditto.
* g10/keydb.c (keydb_search): Add new arg fprlen and change all
callers.
* sm/keydb.c (keydb_search_fpr): Adjust for changed
KEYDB_SEARCH_MODE_FPR.
--
This prepares the support for OpenPGP v5 keys. The new version 2 blob
format is needed for the longer fingerprints and we also use this
opportunity to prepare for storing the keygrip in the blob for faster
lookup by keygrip. Right now this is not yet functional.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (parse_list_options): Add option "show-only-fpr-mbox".
* g10/options.h (LIST_SHOW_ONLY_FPR_MBOX): New.
* g10/keylist.c (list_keyblock_simple): New.
(list_keyblock): Call it.
(list_all): Do not print the keyring name in LIST_SHOW_ONLY_FPR_MBOX
mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/mbox-util.c (mailbox_from_userid): Add arg subaddress and
implement. Change all callers to pass false for it.
* common/t-mbox-util.c (run_mbox_no_sub_test): New.
(run_filter): Add arg no_sub.
(main): Call new test and add option --no-sub.
--
Some stats: In the about 5300000 keys on the SKS servers we found 3055
unique mailboxes with a '+' in it. After removing leading and
trailing '+' as well as multiple '+' (e.g. "c++" or "foo+bar+baz")
2697 were left which seem to be valid sub-addresses.
To filter mailboxes out from a line delimited list with
user-ids (e.g. an SQL output), the command
t-mbox-util --verbose --filter
can be used; to output w/o sub-addresses add --no-sub.
GnuPG-bug-id: 4200
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oKnownNotation): New const.
(opts): Add option --known-notation.
(main): Set option.
* g10/parse-packet.c (known_notations_list): New local var.
(register_known_notation): New.
(can_handle_critical_notation): Rewrite to handle the new feature.
Also print the name of unknown notations in verbose mode.
--
GnuPG-bug-id: 4060
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Set some list options.
--
The new command --show-keys is commonly used to check the content of a
file with keys. In this case it can be expected that all included
subkeys and uids are of interested, even when they are already expired
or have been revoked.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aShowKeys): New const.
(opts): New command --show-keys.
(main): Implement command.
* g10/import.c (import_keys_internal): Don't print stats in show-only
mode.
(import_one): Be silent in show-only mode.
--
Using
--import --import-options show-only
to look at a key is too cumbersome. Provide this shortcut and also
remove some diagnostic cruft in this case.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oAllowMultisigVerification)
(oAllowMultipleMessages, oNoAllowMultipleMessages): Remove.
(opts): Turn --allow-multisig-verification, --allow-multiple-messages
and --no-allow-multiple-messages into NOPs
* g10/options.h (struct opt): Remove flags.allow_multiple_messages.
* g10/mainproc.c (proc_plaintext): Assume allow_multiple_messages is
false.
--
These options are very old compatibility hacks and should not be used
anymore. We keep them as dummy options in case someone has them in
the conf file.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Make --pgp6 an alias for --pgp7.
* common/compliance.h (gnupg_compliance_mode): Remove CO_PGP6.
* g10/options.h (PGP6): Remove. Adjust all users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Tuen options --force-mdc, --no-force-mdc, --disable-mdc
and --no-disable-mdc into NOPs.
* g10/encrypt.c (use_mdc): Simplify. MDC is now almost always used.
(use_aead): Ignore MDC options. Print warning for missing MDC feature
flags.
* g10/pkclist.c (warn_missing_mdc_from_pklist): Rename to ...
(warn_missing_aead_from_pklist): this and adjust.
--
The MDC is now always used except with --rfc2440 which will lead to a
a big fat warning.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oNoMDCWarn): Remove.
(opts): Make --no-mdc-warn a NOP.
(main): Don't set var.
* g10/options.h (struct opt): Remove 'no_mdc_var'.
* g10/cipher-cfb.c (write_header): Assume opt.no_mdc_warn is false.
* g10/mainproc.c (proc_encrypted): Ditto.
--
Users should not be allowed to suppress the warning that they are
shooting into their foot.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (g10_exit): Print STATUS_FAILURE only based on passed
return code and not on the presence of any call to log_error.
--
This fixes an actual regression in GPGME where FAILURE is considered
for example by a signature verify operation. The operation will simply
fail and not just record that that a signature could not be verified.
In particular for files with more than one signature a log_error if
often called to show that a pubkey is missing for one of the
signatures. Using that log_error is correct in that case.
Fixes-commit: 0336e5d1a7
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oNoSymkeyCache): New.
(opts): Add that option.
(main): Set var.
* g10/options.h (struct opt): New field no_symkey_cache.
* g10/passphrase.c (passphrase_to_dek): Implement that feature.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (write_status_failure): Make it print only once.
* g10/gpg.c (wrong_args): Bump error counter.
(g10_exit): Print a FAILURE status if we ever did a log_error etc.
(main): Use log_error instead of log_fatal at one place. Print a
FAILURE status for a bad option. Ditto for certain exit points so
that we can see different error locations.
--
This makes it easier to detect errors by tools which have no way to
get the exit code (e.g. due to double forking).
GnuPG-bug-id: 3872
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oRequestOrigin): New const.
(opts): New option --request-origin.
(main): Parse that option.
* g10/options.h (struct opt): Add field request_origin.
* g10/call-agent.c (start_agent): Send option to the agent.
* sm/gpgsm.c (oRequestOrigin): New const.
(opts): New option --request-origin.
(main): Parse that option.
* sm/gpgsm.h (struct opt): Add field request_origin.
* sm/call-agent.c (start_agent): Send option to the agent.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Add new option.
(opt_set_iobuf_size): New var.
(set_debug): Set the option.
* tests/openpgp/armor.scm: Use this option to revert the buffer size
to the one which used to exhibit the tested bugs.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgpdefs.h (PKT_ENCRYPTED_AEAD): New const.
* g10/dek.h (DEK): Increase size of use_aead to 4 bits.
* g10/filter.h (cipher_filter_context_t): Add new fields for AEAD.
* g10/packet.h (PKT_encrypted): Add fields aead_algo, cipher_algo, and
chunkbyte.
* g10/build-packet.c (do_encrypted_aead): New.
(build_packet): Call it.
* g10/parse-packet.c (dump_sig_subpkt): Handle SIGSUBPKT_PREF_AEAD.
(parse_one_sig_subpkt, can_handle_critical): Ditto.
(parse_encrypted): Clear new PKT_ENCRYPTED fields.
(parse_encrypted_aead): New.
(parse): Call it.
* g10/gpg.c (main): Take care of --rfc4880bis option when checking
compliance.
* g10/cipher-aead.c: Replace the stub by real code.
* g10/decrypt-data.c (decode_filter_ctx_t): Add fields for use with
AEAD.
(aead_set_nonce): New.
(aead_set_ad): New.
(decrypt_data): Support AEAD.
(aead_underflow): New.
(aead_decode_filter): New.
* g10/encrypt.c (use_aead): Make that new fucntion work.
(encrypt_simple): Use default_aead_algo() instead of EAX.
* g10/mainproc.c (proc_encrypted): Support AEAD.
(do_proc_packets): Support PKT_ENCRYPTED_AEAD.
--
This code has seen only a very few manual tests. Encrypting always
uses a 64k chunks and decryption has not been tested with larger
chunks. Those small chunks make debugging much faster.
Tests can be done using:
gpg --rfc4880bis --pinentry-mode=loopback --passphrase abc \
--force-aead --aead-algo ocb --s2k-mode 0 --cipher AES \
-v -z 0 --status-fd 2 -c <INFILE >OUTFILE
and
gpg --rfc4880bis --pinentry-mode=loopback --passphrase=abc \
--status-fd 2 -v -d <INFILE >OUTFILE
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/dek.h (DEK): Turn fields use_mdc, algo_printed and symmetric
into single bit vars. Make sure they are always set to 1 or 0.
(DEK): New field use_aead.
* g10/options.h (struct opt): New field force_aead.
* g10/pkclist.c (select_aead_from_pklist): New.
* g10/gpg.c (oForceAEAD): New const.
(opts): New options "--force-aead".
(main): Set new option.
* g10/encrypt.c (use_aead): New.
(encrypt_simple): Implement new flags DEK.use_aead.
(encrypt_crypt): Ditto.
(encrypt_filter): Ditto.
* g10/sign.c (sign_symencrypt_file): Ditto.
--
This patch should be enough to detect whether AEAD can be used.
Not tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/pkscreening.c: New.
* common/pkscreening.h: New.
* common/Makefile.am (common_sources): Add them.
* g10/gpg.c (opts): New option --with-key-screening.
* g10/options.h (struct opt): New field with_key_screening.
* g10/keylist.c: Include pkscreening.h.
(print_pk_screening): New.
(list_keyblock_print): Call it.
(print_compliance_flags): Call it.
* sm/gpgsm.c (opts): New option --with-key-screening.
* sm/gpgsm.h (scruct opt): New field with_key_screening.
* sm/keylist.c: Include pkscreening.h.
(print_pk_screening): New.
(print_compliance_flags): Call it. Add new arg cert.
(list_cert_colon): Pass arg cert
(list_cert_std): Call print_pk_screening.
* sm/fingerprint.c (gpgsm_get_rsa_modulus): New.
--
This new option can be used to detect ROCA affected keys. To scan an
entire keyring and print the affected fingerprints use this:
gpg -k --with-key-screening --with-colons | gawk -F: \
'$1~/pub|sub|sec|ssb|crt/ && $18~/\<6001\>/ {found=1;next};
$1=="fpr" && found {print $10}; {found=0}'
The same works for gpgsm. Note that we need gawk due to the "\<" in
the r.e.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (gpgconf_list): Announce "auto-key-retrieve".
(main): Simplify setting of KEYSERVER_AUTO_KEY_RETRIEVE.
* tools/gpgconf-comp.c: Make "no-auto-key-retrieve" invisible. Make
"auto-key-retrieve" an expert option.
--
This basically reverts 9bb13a0e81
because --no-auto-key-retrieve is again the default. Note that we
allow both options for the sake of profiles.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_options_gpg): Add max-cert-depth,
completes-needed, and marginals-needed options.
* g10/gpg.c (gpgconf_list): Likewise.
--
Some tests to come for the PGP trust model will need to manipulate
these parameters.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* g10/gpg.c (main): remove KEYSERVER_AUTO_KEY_RETRIEVE from the
default keyserver options.
* doc/gpg.texi: document this change.
--
This is a partial reversion of
7e1fe791d1. Werner and i discussed it
earlier today, and came to the conclusion that:
* the risk of metadata leakage represented by a default
--auto-key-retrieve, both in e-mail (as a "web bug") and in other
contexts where GnuPG is used to verified signatures, is quite high.
* the advantages of --auto-key-retrieve (in terms of signature
verification) can sometimes be achieved in other ways, such as when
a signed message includes a copy of its own key.
* when those other ways are not useful, a graphical, user-facing
application can still offer the user the opportunity to choose to
fetch the key; or it can apply its own policy about when to set
--auto-key-retrieve, without needing to affect the defaults.
Note that --auto-key-retrieve is specifically about signature
verification. Decisions about how and whether to look up a key during
message encryption are governed by --auto-key-locate. This change
does not touch the --auto-key-locate default of "local,wkd". The user
deliberately asking gpg to encrypt to an e-mail address is a different
scenario than having an incoming e-mail trigger a potentially unique
network request.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* doc/gpg.texi: Document new option.
* g10/call-dirmngr.c (create_context): Fail if option is given.
* g10/gpg.c (cmd_and_opt_values): New value.
(opts): New option.
(gpgconf_list): Add new option.
(main): Handle new option.
* g10/options.h (struct opt): New field 'disable_dirmngr'.
* tools/gpgconf-comp.c (gc_options_gpg): New option.
GnuPG-bug-id: 3334
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (gpgconf_list): Print no-auto-key-retrieve instead of
auto-key-retrieve.
* tools/gpgconf-comp.c (gc_options_gpg): Replace auto-key-retrieve by
no-auto-key-retrieve and chnage level from invisible to advanced.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add KEYSERVER_AUTO_KEY_RETRIEVE to the default
keyserver options. Set the default for --auto-key-locate to
"local,wkd". Reset that default iff --auto-key-locate has been given
in the option file or in the commandline.
* g10/getkey.c (parse_auto_key_locate): Work on a copy of the arg.
--
GnuPG-bug-id: 3324
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (apply_meta_data): Remove arg 'merge'. Add arg 'url'.
Implement WKD and DANE key origin.
(import_keys_internal): Add arg 'url' and change all callers.
(import_keys_es_stream): Ditto.
(import): Ditto.
(import_one): Ditto.
* g10/keylist.c (list_keyblock_print): Fix update URL printing.
* g10/call-dirmngr.c (gpg_dirmngr_wkd_get): Add arg 'r_url' to return
the SOURCE. Pass ks_status_cb to assuan_transact.
* g10/keyserver.c (keyserver_import_wkd): Get that URL and pass it to
the import function.
--
Note that this only for new keys. Merging this info will be added
soon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_keys_stream): Remove this unused function.
(import_keys_internal): Add arg origin.
(import_keys): Ditto.
(import_keys_es_stream): Ditto.
(import): Ditto.
(import_one): Ditto.
(apply_meta_data): New stub.
(import_secret_one): Pass 0 for ORIGIN.
* g10/keyserver.c (keyserver_get_chunk): For now pass 0 for ORIGIN.
(keyserver_fetch): Add arg origin.
(keyserver_import_cert): Pass KEYORG_DANE for ORIGIN.
(keyserver_import_wkd): Pass KEYORG_WKD for ORIGIN.
* g10/gpg.c (main): Pass OPT.KEY_ORIGIN to import_keys and
keyserver_fetch.
* g10/card-util.c (fetch_url): Pass KEYORG_URL for ORIGIN.
--
This is just the framework; applying the meta data will be done in
another commit.
GnuPG-bug-id: 3252
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpg.texi: Document the new import option.
* g10/gpg.c (main): Make the new option default to yes.
* g10/import.c (parse_import_options): Parse the new option.
(import_one): Act on the new option.
* g10/options.h (IMPORT_REPAIR_KEYS): New macro.
GnuPG-bug-id: 2236
Signed-off-by: Justus Winter <justus@g10code.com>
* common/compliance.c (gnupg_parse_compliance_option): New function.
* common/compliance.h (struct gnupg_compliance_option): New type.
(gnupg_parse_compliance_option): New prototype.
* g10/gpg.c (parse_compliance_option): Remove function.
(compliance_options): New variable.
(main): Adapt callsite.
* sm/gpgsm.c (main): Use the new common function.
* sm/gpgsm.h (opt): New field 'compliance'.
GnuPG-bug-id: 3191
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (set_compliance_option): The specification, section 4.1.1,
forbids the use of encryption without integrity protection.
GnuPG-bug-id: 3191
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c: Define _dowildcard = -1;
--
If this value is defined wildcard support in the c runtime
is enabled again. This fixes a regression caused by switching to
mingw 3.0
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* g10/keydb.h (KEYDB_HANDLE): Move typedef to ...
* g10/gpg.h: here.
(struct server_control_s): Add field 'cached_getkey_kdb'.
* g10/gpg.c (gpg_deinit_default_ctrl): Release that keydb handle.
* g10/getkey.c (getkey_end): Cache keydb handle.
(get_pubkey): Use cached keydb handle.
* kbx/keybox-search.c (keybox_search_reset): Use lseek instead of
closing the file.
--
Before this patch a "gpg --check-sigs" opened and closed the keybox
file for almost every signature check. By caching the keydb handle
and using lseek(2) this can be limited to just 2 times. This might
speed up things on Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
For proper operations as a server we need to avoid global variables.
Thus we need to pass the session state CTRL to most functions. Quite
a lot of changes but fortunately straightforward to do.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aQuickSetPrimaryUid): New const.
(opts): New command --quick-set-primary-uid.
(main): Implement it.
* g10/keyedit.c (keyedit_quick_adduid): Factor some code out to ...
(quick_find_keyblock): new func.
(keyedit_quick_revuid): Use quick_find_keyblock.
(keyedit_quick_set_primary): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Always initialize the trust db when generating
keys.
* g10/keygen.c (do_generate_keypair): We can now assume that there is
a trust db.
--
It is important to mark keys we create as ultimately trusted.
Fixes-commit: 4735ab96aa
GnuPG-bug-id: 2695
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/export.c (export_seckeys): Add arg OPTIONS and pass it to
do_export.
(export_secsubkeys): Ditto.
* g10/gpg.c (main): Pass opt.export_options to export_seckeys and
export_secsubkeys
--
Back in the old days we did not used the export options for secret
keys export because of a lot of duplicated code and that the old
secring.gpg was anyway smaller that the pubring.gpg. With 2.1 it was
pretty easy to enable it.
Reported-by: Peter Lebbing
GnuPG-bug-id: 2973
* common/sysutils.c (gnupg_fd_valid): New function.
* common/sysutils.h (gnupg_fd_valid): New declaration.
* common/logging.c (log_set_file): Use the new function.
* g10/cpr.c (set_status_fd): Likewise.
* g10/gpg.c (main): Likewise.
* g10/keylist.c (read_sessionkey_from_fd): Likewise.
* g10/passphrase.c (set_attrib_fd): Likewise.
* tests/openpgp/Makefile.am (XTESTS): Add the new test.
* tests/openpgp/issue2941.scm: New file.
--
Consider a situation where the user passes "--status-fd 3" but file
descriptor 3 is not open.
During the course of executing the rest of the commands, it's possible
that gpg itself will open some files, and file descriptor 3 will get
allocated.
In this situation, the status information will be appended directly to
whatever file happens to have landed on fd 3 (the trustdb? the
keyring?).
This is a potential data destruction issue for all writable file
descriptor options:
--status-fd
--attribute-fd
--logger-fd
It's also a potential issue for readable file descriptor options, but
the risk is merely weird behavior, and not data corruption:
--override-session-key-fd
--passphrase-fd
--command-fd
Fixes this by checking whether the fd is valid early on before using
it.
GnuPG-bug-id: 2941
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Define commands with ARGPARSE_c
instead of ARGPARSE_s_n.
--
These three entries are commands, but they're being treated as a
string-based option for some reason. However, if you try to use them
concurrently with another command like --clearsign, you'll get "gpg:
conflicting commands".
Furthermore, because they're marked as options, their flags differ
from the commands that they alias, they cause ambiguity in
abbreviation (e.g. try "gpg --list-ke") which should have been fixed
by 7249ab0f95.
Marking them explicitly as commands for argparse should be more
accurate and should resolve the abbreviation ambiguity issue.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
gpg: fix aliases --list-key, --list-sig, and --check-sig.
* g10/gpg.c: ARGPARSE_OPTS opts[]: define commands with ARGPARSE_c
instead of ARGPARSE_s_n.
--
These three entries are commands, but they're being treated as a
string-based option for some reason. However, if you try to use them
concurrently with another command like --clearsign, you'll get "gpg:
conflicting commands".
Furthermore, because they're marked as options, their flags differ
from the commands that they alias, they cause ambiguity in
abbreviation (e.g. try "gpg --list-ke") which should have been fixed
by 7249ab0f95.
Marking them explicitly as commands for argparse should be more
accurate and should resolve the abbreviation ambiguity issue.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/gpg.c (main): If the parameter for --faked-system-time
ends with a '!', freeze time at the specified point.
* common/gettime.c (gnupg_set_time): Allow to freeze the time
at an arbitrary time instead of only the current time.
* doc/gpg.texi: Update documentation for --faked-system-time.
--
This patch allows the user to modify the behavior of the
--faked-system-time option: by appending a '!' to the parameter,
time in GnuPG will be frozen at the specified time, instead of
advancing normally from that time onward.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* g10/gpg.c (main): Avoid translating arguments to 'wrong_args'.
--
Translating these messages is a burden for translators, and we only
have translations for very few of them as it is.
If we want to localize these messages, I'd suggest to translate the
placeholders (e.g. 'filename').
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Rename options.
(main): Update errors.
* doc/gpg.texi: Update accordingly.
--
I decided not to keep the old versions as aliases in the documentation
because the interface is a fairly recent addition.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Rename option.
* g10/call-agent.c (agent_scd_learn): Update comment.
* doc/gpg.texi: Update accordingly.
--
This change has a surprising side effect. Previously, --edit was an
alias for --edit-key, because the argument parser actually accepts
unique prefixes of all options. With this change, however, --edit is
ambiguous.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Rename option.
* doc/gpg.texi: Update accordingly.
--
This is a rather long name, but I believe that this command is rarely
used, and in places where it is used frequently, the process is likely
automated.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/keygen.c (get_default_pubkey_algo): New.
(parse_key_parameter_string): Use it.
* g10/gpg.c (gpgconf_list): Take value from new function.
--
Note that consumers of that gpgconf-list value may need to be adjusted
to that new value. It should anyway only be used to display the
default algorithm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgp-oid.c (openpgp_is_curve_supported): Add optional arg
R_ALGO and change all callers.
* common/util.h (GPG_ERR_UNKNOWN_FLAG): New error code.
* g10/options.h (struct opt): Add field DEF_NEW_KEY_ALGO.
* g10/gpg.c (oDefaultNewKeyAlgo): New enum.
(opts): New option "--default-new-key-algo".
(main): Set the option.
* g10/keygen.c: Remove DEFAULT_STD_ FUTURE_STD_ constants and replace
them by ...
(DEFAULT_STD_KEY_PARAM, FUTURE_STD_KEY_PARAM): new string constants.
(get_keysize_range): Remove arg R_DEF and return that value instead.
Change all callers.
(gen_rsa): Use get_keysize_range instead of the removed
DEFAULT_STD_KEYSIZE.
(parse_key_parameter_part): New function.
(parse_key_parameter_string): New function.
(quick_generate_keypair): Refactor using parse_key_parameter_string.
(generate_keypair): Ditto.
(parse_algo_usage_expire): Ditto.
--
This new option is intended to be used in the forthcoming
--set-profile command of gpgconf. It allows to provide a gpg
configuration with custom defaults for a new key using the simple
commands which use the default algorithm set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (check_special_filename): Move to ..
* common/sysutils.c (check_special_filename): here. Add arg
NOTRANSLATE.
(allow_special_filenames): New local var.
(enable_special_filenames): New public functions.
* sm/gpgsm.c (allow_special_filenames): Remove var.
(main): Call enable_special_filenames instead of setting the var.
(open_read, open_es_fread, open_es_fwrite): Call
check_special_filename with 0 for NOTRANSLATE.
* common/iobuf.c (special_names_enabled): Remove var.
(iobuf_enable_special_filenames): Remove func.
(check_special_filename): Remove func.
(iobuf_is_pipe_filename): Call new version of the function with
NOTRANSLATE set.
(do_open): Ditto.
* g10/gpg.c (main): Call enable_special_filenames instead of
iobuf_enable_special_filenames.
* g10/gpgv.c (main): Ditto.
--
Note that we keep the iobuf.c:translate_file_handle because it is a
bit different (for whatever reasons) than the translate function from
sysutils.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oOverrideSessionKeyFD): New.
(opts): Add option --override-session-key-fd.
(main): Handle that option.
(read_sessionkey_from_fd): New.
--
The override-session-key feature was designed to mitigate the effect
of the British RIP act by allowing to keep the private key private and
hand out only a session key. For that use case the leaking of the
session key would not be a problem. However there are other use
cases, for example fast re-decryption after an initial decryption,
which would benefit from concealing the session key from other users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (CO_DE_VS): New.
(GNUPG): Also allow CO_DE_VS.
* g10/gpg.c (oDE_VS): New.
(parse_compliance_option): Add "de-vs".
(set_compliance_option): Set "de-vs".
* g10/misc.c (compliance_option_string): Return a description string.
(compliance_failure): Ditto.
* g10/keygen.c (ask_algo): Take care of CO_DE_VS.
(get_keysize_range): Ditto.
(ask_curve): Add new field to CURVES and trun flags into bit flags.
Allow only Brainpool curves in CO_DE_VS mode.
--
As of now this compliance mode only restricts the set of algorithms
and curves which can be created.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oCompliance): New.
(opts): Add "--compliance".
(parse_tofu_policy): Use a generic description string for "help".
(parse_compliance_option): New.
(main): Add option oCompliance. Factor out code for compliance
setting to ...
(set_compliance_option): new.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (DBG_MPI): New.
* g10/gpg.c (set_debug): Use macro or extra parens for binary operator.
* g10/parse-packet.c (set_packet_list_mode): Use dbg macro.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp.c (my_log_monitor): New var.
(my_libassuan_log_handler): Run that monitor.
(setup_libassuan_logging): Add arg to set a log monitor and change all
callers.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (tofu_set_policy): Do the update in a transaction.
* g10/gpg.c (main): Do a TOFU policy update in a batch transaction.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/gpg.c (oWithTofuInfo): New.
(opts): Add --with-tofu-info.
(main): Set opt.with_tofu_info.
* g10/options.h (struct opt): Add field WITH_TOFU_INFO.
* g10/tofu.c (show_statistics): Add optional arg OUTFP and enter
special mode if not NULL. Change all callers.
(tofu_write_tfs_record): New.
* g10/keylist.c (list_keyblock_colon): Do not print the tofu policy as
part of the "uid" record. Print a new "tfs" record if the new option
is set.
* tests/openpgp/tofu.scm (getpolicy): Change from UID to TFS record.
--
A separate option is required to avoid slowing down key listings.
Foer example the current code takes for a keylisting in tofu+pgp mode
17 seconds while it takes more than 5 minutes if the option is used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (struct opt): Add field 'sender_list'.
* g10/gpg.c: Include mbox-util.h.
(oSender): New.
(opts): Add option "--sender".
(main): Parse option.
--
This option will eventually be used for more advanced purposes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/preset-passphrase.c, agent/protect-tool.c, dirmngr/dirmngr.c
* dirmngr/t-http.c, g10/gpg.c, g10/gpgv.c, g13/g13-syshelp.c
* g13/g13.c, kbx/kbxutil.c, scd/scdaemon.c, sm/gpgsm.c
* tests/gpgscm/main.c, tools/gpg-check-pattern.c
* tools/gpg-connect-agent.c, tools/gpgconf.c, tools/gpgtar.c
* tools/symcryptrun.c: Invoke log_set_prefix() with
human-readable labels.
--
Some invocations of log_set_prefix() were done with raw numeric values
instead of values that humans can understand. Use symbolic
representations instead of numeric for better readability.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/options.h: Include stdint.h.
(struct opt): Add field 'input_size_hint'.
* g10/gpg.c (oInputSizeHint): New.
(opts): Add --input-size-hint.
(main): Set opt.input_size_hint.
* g10/progress.c (write_status_progress): Use the hint.
--
This is a prerequisite to fix
GnuPG-bug-id: 2368
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (struct opt): Remove field tofu_db_format.
* g10/gpg.h (server_control_s): Add fields tofu.batch_update_ref and
tofu.batch_update_started.
* g10/gpg.c (parse_tofu_db_format): Remove.
(main): Make option --tofu-db-format obsolete.
* g10/tofu.c: Major rework. Remove the pretty complicated and slower
split format and with that all the caching. Use the dbs struct
directly. Move global vars for batch update into CTRL. Change
calling conventions of some function to take CTRL or DBS pointers
instead of the former low-level database pointer.
--
The split database format might have been nice for use with Unison but
it bypasses the concept of a relational database by doing parts of
this itself and also risking deadlocks. Working with the Tofu
database for debugging or experiments is also not possible with parts
of the database logic implemented in gpg.
The Tofu support is quite new and we can assume that it is not in real
use now. Thus we better remove that now so that we do not need to
maintain it for all future.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/init.c (init_common_subsystems): Initialize libgcrypt.
* dirmngr/Makefile.am (dirmngr_ldap): Link with libgcrypt.
--
Most other modules already call gcry_check_version() after
init_common_subsystems() so may as well move initialization of libgcrypt
to here. Also fixes a warning in the system log from gpgconf --homedir.
Signed-off-by: Ben Kibbey <bjk@luxsci.net>
* g10/gpg.c (main): initialize opt.emit_version to 0
* doc/gpg.texi: document different default for --emit-version
--
The version of GnuPG in use is not particularly helpful. It is not
cryptographically verifiable, and it doesn't distinguish between
significant version differences like 2.0.x and 2.1.x.
Additionally, it leaks metadata that can be used to distinguish users
from one another, and can potentially be used to target specific
attacks if there are known behaviors that differ between major
versions.
It's probably better to take the more parsimonious approach to
metadata production by default.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/gpg.c (oMimemode): New.
(opts): Add --mimemode.
(main): Use --mimemode only in rfc4880bis compliance mode.
* g10/options.h (struct opt): Add field "mimemode".
* g10/build-packet.c (do_plaintext): Allow for mode 'm'.
* g10/encrypt.c (encrypt_simple, encrypt_crypt): Use 'm' if requested.
* g10/plaintext.c (handle_plaintext): Handle 'm' mode.
* g10/sign.c (write_plaintext_packet): Handle 'm' mode.
(sign_file, sign_symencrypt_file): Use 'm' if requested.
--
Thsi patch prepares for a proposed change in RFC4880bis to support a
MIME flag. A literal data packet with the mime flag set is handled
like a 't' or 'u' but CR are not removed. The PLAINTEXT status line
will also indicate a MIME content.
If --mimemode is used without --rfc4880bis 't' will be used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oRecipientFile, oHiddenRecipientFile): New.
(opts): Add options --recipient-file and --hidden-recipient-file.
(main): Implement them. Also remove duplicate code from similar
options.
* g10/keydb.h (PK_LIST_FROM_FILE): New.
(PK_LIST_SHIFT): Bump up.
* g10/pkclist.c (expand_group): Take care of PK_LIST_FROM_FILE.
(find_and_check_key): Add and implement arg FROM_FILE.
(build_pk_list): Pass new value for new arg.
* g10/getkey.c (get_pubkey_fromfile): New.
* g10/gpgv.c (read_key_from_file): New stub.
* g10/test-stubs.c (read_key_from_file): New stub.
* g10/server.c (cmd_recipient): Add flag --file.
* g10/import.c (read_key_from_file): New.
* tests/openpgp/defs.scm (key-file1): New.
(key-file2): New.
* tests/openpgp/setup.scm: Add their private keys and import the
key-file1.
* tests/openpgp/encrypt.scm: Add new test.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oNoKeyring): New.
(opts): Add "--no-keyring".
(main): Do not register any keyring if the option is used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oImportFilter): New.
(opts): Add --import-filter.
(main): Handle option.
* g10/import.c: Include recsel.h, init.h, and mbox-util.h.
(import_keep_uid): New global var.
(cleanup_import_globals): New.
(parse_and_set_import_filter): New.
(filter_getval): New.
(apply_keep_uid_filter): New.
(import_one): Apply filter if set.
--
Funny new option. It can for example be used to export a key with
only one user id:
gpg --no-options --import --import-options import-export \
--import-filter keep-uid='mbox=wk@gnupg.org' \
< full-key.pub > key-with-one-uid.pub
More features will eventually be added.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/revoke.c (get_default_uid_revocation_reason): New.
* g10/keyedit.c (menu_revuid): Break out creation of uid revocation
into new function core_revuid.
* g10/keyedit.c (keyedit_quick_revuid): New. Selects key and
uid, invokes core_revuid.
* g10/gpg.c (main): Handle --quick-revuid argument.
* doc/gpg.texi: Document --quick-revuid.
--
This functionality is a counterpart to --quick-adduid, and will be
useful for projects that depend programmatically on gpg to revoke user
IDs (one such example is "monkeysphere-host revoke-servicename").
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
- Minor re-indentation work.
- Changed a "0 == memcmp" to "!memcmp"
- Removed tests/openpgp/quick-key-manipulation.test from the
Makefile. This test needs to be converted to gpgscm.
- Removed example from whats-new-in-2.1.txt because that is generated.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (struct opt): Add field flags.rfc4880bis.
* g10/gpg.c (oRFC4880bis): new.
(opts): add --rfc4880bis.
(main): Implement that and print a warning.
--
This is option enables experimental features which may be dropped or
changed with the next release.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Remove deprecation warning.
--
Most options for the keyserver have been moved to dirmngr and thus it
does not make sense to favor "--keyserver-options auto-key-retrieve"
over the direct options --auto-key-retrieve and --no-auto-key-retrieve.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oDisableSignerUID): New.
(opts): New option '--disable-signer-uid'.
(main): Set option.
* g10/options.h (opt): Add field flags.disable_signer_uid.
* g10/sign.c: Include mbox-util.h.
(mk_notation_policy_etc): Embed the signer's uid.
* g10/mainproc.c (check_sig_and_print): Do not use WKD for auto key
retrieval if --disable-signer-uid is used.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add option "none" to --keyid-format.
* g10/options.h (KF_NONE): New.
* g10/keyid.c (format_keyid): Implement that.
(keystr): Use format "long" is KF_NONE is in use.
(keystr_with_sub): Ditto.
* g10/keylist.c (list_keyblock_print): Adjust indentaion for KF_NONE.
Factor some code out to ...
(print_key_line): new.
(print_fingerprint): Add mode 20.
* g10/mainproc.c (list_node): Use print_key_line. Replace MAINKEY by
flags.primary in the PK. Fix putting a " revoked..." string into the
colons format.
* g10/pkclist.c (do_edit_ownertrust): Use print_key_line. This
slightly changes the putput format.
* g10/revoke.c (gen_standard_revoke): Use print_key_line. This may
also put "expires: " into the output.
--
Due to user experience problems with the keyid and we better allow to
show the fingerprint instead. Note that we do not support v3 keys
anymore and thus there is no technical need for a user to know the
keyid.
GnuPG-bug-id: 2379
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (DEFAULT_STD_SUBKEYUSE): New.
(ask_keysize): Factor code out to ...
(get_keysize_range, fixup_keysize): new.
(parse_parameter_usage): Factor parsing out to ...
(parse_usagestr): new. Allow use of "encr" as alias for "encrypt".
(parse_subkey_algostr_usagestr): New.
(generate_subkeypair): Add new args. Implement unattended mode.
* g10/keyedit.c (keyedit_quick_sign): Factor some code out to ...
(find_by_primary_fpr): new.
(keyedit_quick_addkey): New.
* g10/gpg.c (aQuickAddKey): New.
(opts): Add --quick-addkey.
(main): Implement.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.h (struct tofu_dbs_s, tofu_dbs_t): New declarations.
(struct server_control_s): Add field tofu.dbs.
* g10/tofu.c (struct dbs): Rename to tofu_dbs_s. Replace all users by
by tofu_dbs_t.
(opendbs): Add arg CTRL. Cache the DBS in CTRL.
(closedbs): Rename to tofu_closedbs and make global. Add arg CTRL.
(tofu_register): Add arg CTRL. Change all callers. Do not call
closedbs.
(tofu_get_validity): Ditto.
(tofu_set_policy): Ditto.
(tofu_get_policy): Ditto.
(tofu_set_policy_by_keyid): Add arg CTRL.
* g10/gpg.c (gpg_deinit_default_ctrl): Call tofu_closedbs.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (parse_auto_key_locate): Add method "wkd".
(get_pubkey_byname): Implement that method. Also rename a variable.
* g10/call-dirmngr.c (gpg_dirmngr_wkd_get): New.
* g10/keyserver.c (keyserver_import_wkd): New.
* g10/test-stubs.c (keyserver_import_wkd): Add stub.
* g10/gpgv.c (keyserver_import_wkd): Ditto.
* g10/options.h (opt): Add field 'with_wkd_hash'.
(AKL_WKD): New.
* g10/gpg.c (oWithWKDHash): New.
(opts): Add option --with-wkd-hash.
(main): Set that option.
* g10/keylist.c (list_keyblock_print): Implement that option.
--
The Web Key Directory is an experimental feature to retrieve a key via
https. It is similar to OpenPGP DANE but also uses an encryption to
reveal less information about a key lookup.
For example the URI to lookup the key for Joe.Doe@Example.ORG is:
https://example.org/.well-known/openpgpkey/
hu/example.org/iy9q119eutrkn8s1mk4r39qejnbu3n5q
(line has been wrapped for rendering purposes). The hash is a
z-Base-32 encoded SHA-1 hash of the mail address' local-part. The
address wk@gnupg.org can be used for testing.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Using "help" as value lists the options. Not having the current
options in the help text also makes it easier to keep translations
clean.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add LIST_SHOW_USAGE.
--
The usage flags are often useful and they don't take away much space
in a key listing. Thus it is better to have them enabled by default.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/export.c: Include membuf.h and host2net.h.
(key_to_sshblob): New.
(export_ssh_key): New.
* g10/gpg.c (aExportSshKey): New.
(opts): Add command.
(main): Implement that command.
--
GnuPG-bug-id: 2212
I have done only a few tests rights now and the ECDSA curves do not
yet work. However ssh-keygen -l accept RSA and ed25519 keys exported
using this command.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (struct result): Move from here...
* g10/keydb.h (struct pubkey): ... to here. Update users.
* g10/gpg.c (check_user_ids): Move from here...
* g10/getkey.c (get_pubkeys): ... to here. Update users. Use
get_pubkey_byname to look up the keys (this also prunes invalid keys).
(pubkey_free): New function.
(pubkeys_free): New function.
* g10/gpg.c (main): Don't check for ambiguous key specifications.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Regression-due-to: e8c53fc
This change not only moves the checks for ambiguous key specifications
from gpg.c to getkey.c, it also disables the checks. The old code was
too divorced from the actual key lookups and, as such, it reproduced
the logic. Unfortunately, the reproduction was a poor one: despite
fixing some inconsistencies (e.g., 10cca02), it still didn't deal with
group expansion or the auto key lookup functionality. Given the
amount of instability introduced by this change, we (Neal & Werner)
decided it is better to defer introducing this functionality until
2.3.
* g10/gpg.c (main): If --encrypt-to-default-key is specified, don't
add --default-key's value to REMUSR here...
* g10/pkclist.c (build_pk_list): ... do it here.
* tests/openpgp/Makefile.am (TESTS): Add default-key.test.
* tests/openpgp/default-key.test: New file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/gpg.c (check_user_ids): When checking for ambiguous keys, ignore
encryption-only keys when a signing key is needed and vice-versa.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/gpg.c (main): When --default-key or --encrypt-to-default-key is
taken from the config file, note this.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Regression-due-to: 28311d1
* g10/gpg.c (check_user_ids): When checking for ambiguous keys, ignore
disabled, revoked and expired keys (if appropriate for the provided
option).
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2186
