* scd/ccid-driver.c (bulk_in): Increase timeout by the multiplier
value as defined section 6.2.6 in CCID specification.
--
For TPDU level transfer, it was handled. This is fix for APDU level
transfer.
GnuPG-bug-id: 4646
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (ccid_transceive_apdu_level): Use bBWI=0 for APDU
level transfer.
(ccid_transceive): Use bBWI=0 or the value returend by WTX for TPDU
level transfer.
GnuPG-bug-id: 4654
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (CCID_CMD_TIMEOUT_LONGER): Remove.
(ccid_transceive): Don't use x4 blindly for bBWI, but use dynamically
determined value. Use value from variable wait_more for bulk_in.
Set wait_more by the value of time extension request.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (ccid_open_usb_reader): Alway submit SET_INTERFACE
control transfer.
--
This handling is not mondatory, but it's better to do so, because
there are card reader with pinpad and token with ack button, which
support user interaction.
User interaction status should be reset at open time. The status
should be reset when the session is closed/stopped. In practice,
since cleanup routine in a driver may not be called properly, it's
good to submit SET_INTERFACE at open time.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (intr_cb): When LIBUSB_TRANSFER_NO_DEVICE,
just handle this event as failure.
--
It used to try another interrupt transfer request to make sure
if it fails again.
GnuPG-bug-id: 4308
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (intr_cb): Try submitting INTERRUPT urb
to see if it's suspend/resume.
--
Upon suspend/resume, LIBUSB_TRANSFER_NO_DEVICE is returned, since all
URBs are cancelled. We need to see if it's real NODEV error or its by
suspend/resume. We can distinguish by sending URB again.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (do_close_reader): Set NULL on close.
(bulk_in): Move DEBUGOUT and check by EP_INTR.
(ccid_get_atr): Clear powered_off flag after initial status check.
--
Many card readers automatically turn on inserted card, but some
defaults to turning off at start.
GnuPG-bug-id: 3508
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (open_ccid_reader): Fix error handling of ccid_get_atr.
* scd/app.c (select_application): Always kick the loop if new APP.
* scd/ccid-driver.c (ccid_open_usb_reader): Don't setup at open.
(ccid_slot_status): Setup interrupt transfer when !ON_WIRE.
--
We can use the interrupt transfer to be notified about card status
change. In this case, we don't need to issue PC_to_RDR_GetSlotStatus
command. This change improve the setup the notification; it should be
done after registration of APP.
When the setup is done just after opening the USB connection (before
issuing PC_to_RDR_IccPowerOn), a reader might notifies about no card
availability (because of not yet powered on), even though the card is
ready to be powered on.
GnuPG-bug-id: 3508
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (intr_cb): Only kick the loop for removal.
(bulk_in): Don't set POWERED_OFF when interrupt transfer is enabled.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-reader.c (scan_usb_device): Only for scan mode, so, rename
from scan_or_find_usb_device.
(scan_devices): Likewise. Remove support of special transport types.
(ccid_get_reader_list): Simplify.
(abort_cmd): Fix error return.
(send_escape_cmd): Fix for RESULTLEN == NULL.
(ccid_transceive_secure): Remove unnecessary var updates.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (CCID_CMD_TIMEOUT): Back to original value.
(CCID_CMD_TIMEOUT_LONGER): New.
(ccid_transceive): Add kludge for key generation.
--
At key generation of longer key size, OpenPGP card sends back "time
extension" with BWI=100, which is unusual value in the protocol and it
actually requires host having longer timeout like 43 seconds.
Reported-by: Szczepan Zalega <szczepan@nitrokey.com>
Fixes-commit: 6510df3a7cd2b5bf44fac1e4d50ee54b8c897daa
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (select_application): Fix the logic if periodical check is
needed. If it is needed for newly found device(s), kick the loop.
(scd_update_reader_status_file): Return value if select(2) should be
called with timeout.
* scd/ccid-driver.c (ccid_require_get_status): Don't return 0 for
token with no interrupt transfer for now.
* scd/command.c (open_card_with_request): Fix scan by SERIALNO.
* scd/scdaemon.c (update_usb): Remove.
(handle_connections): Evaluate need_tick after handle_tick.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (get_status_reader): Add ON_WIRE arg, here.
(ct_get_status, pcsc_get_status_direct, pcsc_get_status_wrapped)
(pcsc_get_status, get_status_ccid, my_rapdu_get_status): Likewise.
(reset_pcsc_reader_wrapped, open_pcsc_reader_wrapped): Follow the
change.
(apdu_get_status_internal): It's lower-level driver which judge
it's not needed. Otherwise, it can't detect the removal.
* scd/ccid-driver.c (ccid_slot_status): After the POWERED_OFF check,
we can skip sending GetSlotStatus packet on wire, when no need.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
Fixes-commit: c8eee4d396a751d41fd1ee1e1b87b851fca172a
* scd/ccid-driver.c (do_close_reader): Don't lock events, but check the
return value of libusb_cancel_transfer.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-common.h (struct app_ctx_s): Rename field to
periodical_check_needed.
* scd/scdaemon.c (update_usb): Rename from update_fdset_for_usb.
Don't use libusb_get_pollfds any more.
(scd_kick_the_loop): New.
(need_tick): Follow the rename.
(handle_connections): No libusb event handling here.
* scd/app.c (app_new_register): Follow the change of rename.
(select_application, scd_update_reader_status_file): Likewise.
* scd/ccid-driver.c (ccid_usb_thread_is_alive): New.
(intr_cb): Call scd_kick_the_loop.
(ccid_usb_thread): New. Thread to invoke INTERRUPT callback.
(ccid_open_usb_reader): Add thread invocation.
(ccid_require_get_status): Remove
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP.
(do_close_reader): Carefully handle handle->transfer.
(get_escaped_usb_string): Insert npth_unprotect/npth_protect.
(do_close_reader, bulk_out, bulk_in, abort_cmd, ccid_slot_status)
(ccid_transceive, ccid_transceive_secure): Likewise.
--
It found that libusb_get_pollfds is not supported on Windows.
Besides, it's a bit difficult to use for the select loop.
Thus, we use the thread named ccid_usb_thread, instead.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c(struct reader_table_s): Add require_get_status.
(apdu_connect): Change return value meaning. Call apdu_reset here.
* scd/app.c (app_new_register): Add require_get_status.
(select_application): Use the return value of apdu_connect.
(scd_update_reader_status_file): Call update_fdset_for_usb with
checking all_have_intr_endp.
(app_list_start, app_list_finish): Remove.
* scd/ccid-driver.c (struct ccid_driver_s): Add transfer.
(intr_cb): Don't call libusb_transfer in this callback.
(ccid_require_get_status): New.
(do_close_reader): Call libusb_transfer here.
* scd/scdaemon.c (update_fdset_for_usb): Remove the first argument.
--
With Gnuk Token, it works fine as expected. With Gemalto reader,
intr_cb is not called when card is removed. So, the macro
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP is not defined yet.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (new_reader_slot): Lock is now in apdu_dev_list_start.
(close_pcsc_reader_direct, close_ccid_reader): RDRNAME is handled...
(apdu_close_reader): ... by this function now.
(apdu_prepare_exit): Likewise.
(open_ccid_reader): Open with dev_list.
(apdu_dev_list_start, apdu_dev_list_finish): New.
(apdu_open_one_reader): New.
(apdu_open_reader): Support multiple readers.
* scd/app.c (select_application): With SCAN, opening all readers
available, and register as new APP.
(app_write_learn_status): app->ref_count == 0 is valid for APP which is
not yet used.
(app_list_start, app_list_finish): New.
* scd/ccid-driver.c (struct ccid_driver_s): Remove RID and BCD_DEVICE.
Add BAI.
(parse_ccid_descriptor): BCD_DEVICE is now on the arguments.
(ccid_dev_scan, ccid_dev_scan_finish): New.
(ccid_get_BAI, ccid_compare_BAI, ccid_open_usb_reader): New.
(ccid_open_reader): Support multiple readers.
(ccid_set_progress_cb, ccid_close_reader): No RID any more.
--
With this change, multiple readers/tokens are supported by the internal
CCID driver of GnuPG. Until the changes of upper layers (scdaemon,
gpg-agent, and gpg front end), only a single reader is used, though.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (scan_or_find_usb_device): Don't scan for
configuration but use active configuration. Support alt_setting.
(scan_or_find_devices): Support alt_setting.
(ccid_open_reader): Support alt_setting.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (scan_or_find_usb_device): Fix return value.
Support device with multiple CCID interfaces. Fix the case with
READERNO. Support partial string match of "reader-port" like PC/SC
driver.
--
I don't know any device with multiple CCID interfaces, though.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
with clearer text.
In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something. When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.
These changes should make the language a bit clearer.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* (parse_ccid_descriptor): nonnull_nad = 0 for all GEMPC device.
--
We can't use the driver for 08E6:3438, while it works well under PC/SC
service. I found that the library of ccid always uses the node
address = ZERO for all transactions. So, we extend the same handling
for not only GEMPC_CT30, but also for all its devices.
Debian-bug-id: 814584
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* configure.ac (LIBUSB_CPPFLAGS): New.
* scd/Makefile.am (AM_CPPFLAGS): Add LIBUSB_CPPFLAGS.
* scd/ccid-driver.c: Use libusb 1.0 API.
--
Changes are straightforward, not use any new features.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (bulk_out): Use LIBUSB_ERRNO_NO_SUCH_DEVICE.
--
With libusb-compat library, the error is different than original
libusb. (The libusb-compat library is used by Fedora.)
