--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/server.c (cmd_killdirmngr): Return 0.
* tools/gpg-connect-agent.c (main): Catch signals.
--
And we also print nicer diagnostics. The reason we need this is that
for example "gpgconf --kill dirmngr" uses gpg-connect-agent to send a
command to dirmngr. This may results in a SIGPIPE which in turn leads
to an annoying error message from gpgconf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid. Delay setting of homedir until the new
chuid is done.
* sm/gpgsm.c (main): Delay setting of homedir until the new chuid is
done.
* tools/gpg-card.c (oChUid): New.
(opts): Add --chuid.
(changeuser): New helper var.
(main): Implement --chuid.
* tools/gpg-connect-agent.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gpgrlhelp.c (read_write_history): New.
(gnupg_rl_initialize): Register new function.
* common/ttyio.c (my_rl_rw_history): New var.
(tty_private_set_rl_hooks): Add arg read_write_history.
(tty_read_history): New.
(tty_write_history): New.
* tools/gpg-card.c (HISTORYNAME): New.
(oNoHistory): New enum value.
(opts): New option --no-history.
(cmd_history): New.
(cmds): New command "history".
(interactive_loop): Read and save the history.
* tools/gpg-connect-agent.c (HISTORYNAME): New.
(opts): New option --no-history.
(main): Read and save the history. New command /history.
--
Yeah, finally we have stored history; I should have added this much
earlier.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Remove argparse.h.
* common/argparse.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* agent/gpg-agent.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS and include
argparse.h. Do this also for all main modules which use our option
parser except for gpg. Replace calls to strusage by calls to
gpgrt_strusage everywhere.
* g10/gpg.c (opts): Change type to gpgrt_opt_t. Flag oOptions and
oNoOptions with ARGPARSE_conffile and ARGPARSE_no_conffile.
(main): Change type of pargs to gpgrt_argparse_t. Rework the option
parser to make use of the new gpgrt_argparser.
--
This is not yet finished but a make check works. gpg has the most
complex and oldest option handling and thus this is the first
migration target. SE-Linux checks and version-ed config files are
missing and will be added later.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* configure.ac: New option --keyboxd-pgm.
(KEYBOXD_NAME, KEYBOXD_DISP_NAME): New ac_defines.
* common/util.h: Add substitutes for new error codes.
(GNUPG_MODULE_NAME_KEYBOXD): New.
* common/homedir.c (gnupg_module_name): Support
GNUPG_MODULE_NAME_KEYBOXD.
* common/asshelp.c (SECS_TO_WAIT_FOR_KEYBOXD): New.
(wait_for_sock): Support keyboxd.
(start_new_service): Ditto.
(start_new_keyboxd): New.
* tools/gpg-connect-agent.c: New options --keyboxd and
--keyboxd-program.
(start_agent): Implement new option.
--
This change allows us to test the new keyboxd using our standard
helper. It also provides the necessary code to start keyboxd on the
fly.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-connect-agent.c (start_agent): Add paren.
--
The intention is comparing the error code depending opt.use_dirmngr.
Considering C Operator Precedence, we should have paren here.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpg-connect-agent.c (main): Use a gpgrt_stream_t for
'script_fp'. Adapt accordingly.
--
Werner asked me to make gpgconf use the platform abstractions that
were introduced after gpgconf's inception. After doing that, I
realized that 'read_line' is only used in two more places, one of
which this patch takes care of.
Signed-off-by: Justus Winter <justus@g10code.com>
* agent/preset-passphrase.c, agent/protect-tool.c, dirmngr/dirmngr.c
* dirmngr/t-http.c, g10/gpg.c, g10/gpgv.c, g13/g13-syshelp.c
* g13/g13.c, kbx/kbxutil.c, scd/scdaemon.c, sm/gpgsm.c
* tests/gpgscm/main.c, tools/gpg-check-pattern.c
* tools/gpg-connect-agent.c, tools/gpgconf.c, tools/gpgtar.c
* tools/symcryptrun.c: Invoke log_set_prefix() with
human-readable labels.
--
Some invocations of log_set_prefix() were done with raw numeric values
instead of values that humans can understand. Use symbolic
representations instead of numeric for better readability.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/homedir.c: Include sys/stat.h and zb32.h.
(w32_portable_app, w32_bin_is_bin): Change type from int to byte.
(non_default_homedir): New.
(is_gnupg_default_homedir): New.
(default_homedir): Set non_default_homedir.
(gnupg_set_homedir): Set non_default_homedir and make
the_gnupg_homedir and absolute directory name.
(gnupg_homedir): Return an absolute directory name.
(_gnupg_socketdir_internal): New.
(gnupg_socketdir): Implement /run/user/ based sockets.
* tools/gpg-connect-agent.c (get_var_ext): Replace now obsolete
make_filename by xstrdup.
* tools/gpgconf.c (main): Sue gnupg_homedir for the "homedir:" output.
--
If a [/var]/run/user/$(id -u)/ directory exists, a gnupg subdir is
created as needed and the permissions of the directories are checked.
If that all matches that directory name is returned instead of the
homedir.
To cope with non standard homedirs (via GNUPGHOME or --homedir) the
SHA-1 hash of the homedir is computed, left truncated to 120 bits,
zBase-32 encoded, prefixed with "d.", and appended to
"[/var]/run/user/$(id -u)/gnupg/". If that directory exists and has
proper permissions it is returned as socket dir - if not the homedir
is used. Due to cleanup issues, this directory will not be
auto-created but needs to be created by the user in advance.
The required permissions are: directory owned by the user, group and
others bits not set.
Signed-off-by: Werner Koch <wk@gnupg.org>
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
GnuPG requires that options are given before other arguments. This
can sometimes be confusing. We now print a warning if we found an
argument looking alike a long option without being preceded by the
stop option. This is bug#1343.
* common/argparse.h (ARGPARSE_FLAG_STOP_SEEN): New.
* common/argparse.c (arg_parse): Set new flag.
* g10/gpg.c (main): Print the warning.
* agent/gpg-agent.c (main): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
* g13/g13.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
For the shared code parts it is cumbersome to pass an error sourse
variable to each function. Its value is always a constant for a given
binary and thus a global variable makes things a lot easier than the
former macro stuff.
* common/init.c (default_errsource): New global var.
(init_common_subsystems): Rename to _init_common_subsystems. Set
DEFAULT_ERRSOURCE.
* common/init.h: Assert value of GPG_ERR_SOURCE_DEFAULT.
(init_common_subsystems): New macro.
* common/util.h (default_errsource): Add declaration.
* kbx/keybox-defs.h: Add some GPG_ERR_SOURCE_DEFAULT trickery.
* agent/call-scd.c (pass_status_thru): Pass comment lines verbatim.
* tools/gpg-connect-agent.c (help_cmd_p): New.
(main): Treat an "SCD HELP" the same as "HELP".
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* call-pinentry.c (start_pinentry): Call assuan_pipe_connect, not
assuan_pipe_connect_ext.
* command.c (start_command_handler): Change
assuan_init_socket_server_ext into assuan_init_socket_server.
* call-scd.c (start_scd): Update use of assuan_socket_connect and
assuan_pipe_connect.
* gpg-agent.c (check_own_socket_thread, check_for_running_agent):
Update use of assuan_socket_connect.
common/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Update use of
assuan_socket_connect and assuan_pipe_connect.
scd/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* command.c (scd_command_handler): Call assuan_init_socket_server,
not assuan_init_socket_server_ext.
sm/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* call-dirmngr.c (start_dirmngr_ext): Update use of
assuan_pipe_connect and assuan_socket_connect.
tools/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (start_agent): Update use of
assuan_socket_connect and assuan_pipe_connect.
* configure.ac (NEED_LIBASSUAN_API, NEED_LIBASSUAN_VERSION):
Update to new API (2, 1.1.0).
agent/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-agent.c (parse_rereadable_options): Don't set global assuan
log file (there ain't one anymore).
(main): Update to new API.
(check_own_socket_pid_cb): Return gpg_error_t instead of int.
(check_own_socket_thread, check_for_running_agent): Create assuan
context before connecting to server.
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(write_and_clear_outbuf): Use gpg_error_t instead of
assuan_error_t.
(cmd_geteventcounter, cmd_istrusted, cmd_listtrusted)
(cmd_marktrusted, cmd_havekey, cmd_sigkey, cmd_setkeydesc)
(cmd_sethash, cmd_pksign, cmd_pkdecrypt, cmd_genkey, cmd_readkey)
(cmd_keyinfo, cmd_get_passphrase, cmd_clear_passphrase)
(cmd_get_confirmation, cmd_learn, cmd_passwd)
(cmd_preset_passphrase, cmd_scd, cmd_getval, cmd_putval)
(cmd_updatestartuptty, cmd_killagent, cmd_reloadagent)
(cmd_getinfo, option_handler): Return gpg_error_t instead of int.
(post_cmd_notify): Change type of ERR to gpg_error_t from int.
(io_monitor): Add hook argument. Use symbols for constants.
(register_commands): Change return type of HANDLER to gpg_error_t.
(start_command_handler): Allocate assuan context before starting
server.
* call-pinentry.c: Include "scdaemon.h" before <assuan.h> because
of GPG_ERR_SOURCE_DEFAULT check.
(unlock_pinentry): Call assuan_release instead of
assuan_disconnect.
(getinfo_pid_cb, getpin_cb): Return gpg_error_t instead of int.
(start_pinentry): Allocate assuan context before connecting to
server.
* call-scd.c (membuf_data_cb, learn_status_cb, get_serialno_cb)
(membuf_data_cb, inq_needpin, card_getattr_cb, pass_status_thru)
(pass_data_thru): Change return type to gpg_error_t.
(start_scd): Allocate assuan context before connecting to server.
common/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Allocate assuan context before
starting server.
g10/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* call-agent.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(learn_status_cb, dummy_data_cb, get_serialno_cb, default_inq_cb)
(learn_status_cb, inq_writecert_parms, inq_writekey_parms)
(scd_genkey_cb, membuf_data_cb): Return gpg_error_t instead of
int.
* gpg.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(main): Update to new Assuan API.
* server.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, do_listkeys, cmd_listkeys)
(cmd_listsecretkeys, cmd_genkey, cmd_getinfo): Return gpg_error_t
instead of int.
(register_commands): Allocate assuan context before starting
server.
(gpg_server): Allocate assuan_context before starting server.
scd/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, open_card, cmd_serialno, cmd_lean, cmd_readcert)
(cmd_readkey, cmd_setdata, cmd_pksign, cmd_pkauth, cmd_pkdecrypt)
(cmd_getattr, cmd_setattr, cmd_writecert, cmd_writekey)
(cmd_genkey, cmd_random, cmd_passwd, cmd_checkpin, cmd_lock)
(cmd_unlock, cmd_getinfo, cmd_restart, cmd_disconnect, cmd_apdu)
(cmd_killscd): Return gpg_error_t instead of int.
(scd_command_handler): Allocate assuan context before starting server.
* scdaemon.c (main): Update to new Assuan API.
sm/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpgsm.c (main): Update to new assuan API.
* server.c: Include "gpgsm.h" before <assuan.h> due to check for
GPG_ERR_SOURCE_DEFAULT and assuan.h now including gpg-error.h.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, cmd_listkeys, cmd_dumpkeys)
(cmd_listsecretkeys, cmd_dumpsecretkeys, cmd_genkey)
(cmd_getauditlog, cmd_getinfo): Return gpg_error_t instead of int.
(register_commands): Same for member HANDLER in table.
(gpgsm_server): Allocate assuan context before starting server.
* sm/call-dirmngr.c:
* call-dirmngr.c (prepare_dirmngr): Check for CTX and error before
setting LDAPSERVER.
(start_dirmngr_ext): Allocate assuan context before starting
server.
(inq_certificate, isvalid_status_cb, lookup_cb, lookup_status_cb)
(run_command_cb, run_command_inq_cb, run_command_status_cb):
Return gpg_error_t instead of int.
tools/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (getinfo_pid_cb, read_and_print_response)
(main): Update to new Assuan API.
